EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 500x700x200 mm
• Material: 0.8 - 1.2 mm galvanized steel sheet
• Front: door locked with a cylinder lock with 2 keys included
• Back: 6 mm thick plywood wall
• 35 mm diameter holes for cable glands in the top and bottom panels
• Weight 7.7 kg
• Material: 0.8 - 1.2 mm galvanized steel sheet
• Front: door locked with a cylinder lock with 2 keys included
• Back: 6 mm thick plywood wall
• 35 mm diameter holes for cable glands in the top and bottom panels
• Weight 7.7 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 400x400x140 mm
• Material: galvanized steel sheet, 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with 2 keys included
• Back: wall made of 6 mm thick plywood
• 35 mm diameter punches in the upper and lower walls for cable entry
• Weight 3.40 kg
• Material: galvanized steel sheet, 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with 2 keys included
• Back: wall made of 6 mm thick plywood
• 35 mm diameter punches in the upper and lower walls for cable entry
• Weight 3.40 kg
The casing is used in surface-mounted installations in telecommunications installations to protect various devices installed in this type of installations.
• Dimensions: 520x400x140 mm
• Material: galvanized steel sheet, 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with 2 keys included
• Back: wall made of 6 mm thick plywood
• 35 mm diameter punches in the upper and lower walls for cable entry
• Weight 4.20 kg
• Material: galvanized steel sheet, 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with 2 keys included
• Back: wall made of 6 mm thick plywood
• 35 mm diameter punches in the upper and lower walls for cable entry
• Weight 4.20 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Width x height x depth: 300x300x100 mm
• Weight: 1.75 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 1.75 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
The housing is used for surface mounting for telecommunication systems in order to protect various devices installed.
• Dimensions: 240x150x100 mm
• Material: 0.8-1.2 mm thick galvanized steel sheet
• Front: door closed with a cylinder lock with 2 keys in set
• Back: 6-mm thick wall made of plywood
• Weight: 0.90 kg
• Material: 0.8-1.2 mm thick galvanized steel sheet
• Front: door closed with a cylinder lock with 2 keys in set
• Back: 6-mm thick wall made of plywood
• Weight: 0.90 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Box for housing splitters, taps etc. in buildings
• Width x height x depth: 240x150x50 mm
• Weight: 0.70 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Width x height x depth: 240x150x50 mm
• Weight: 0.70 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 200x300x120 mm
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 1.6 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 1.6 kg
Metal housing, used as connection / distribution box, 2 keys included. Size: 540x420x180 mm.
• Dimensions: 540x400x180 mm
• Material: galvanized steel sheet 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 5.60 kg
• Material: galvanized steel sheet 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 5.60 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 500x500x200 mm
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 6.10 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 6.10 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 450x350x120 mm
• Material: Galvanised steel sheet 0.8 - 1.2 mm thick
• Front: door locked by cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 3.70 kg
• Material: Galvanised steel sheet 0.8 - 1.2 mm thick
• Front: door locked by cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 3.70 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 650x350x120 mm
• Material: galvanised steel sheet 0.8 - 1.2 mm thick
• Front: door locked by cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 3.50 kg
• Material: galvanised steel sheet 0.8 - 1.2 mm thick
• Front: door locked by cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 3.50 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 600x400x200 mm
• Material: Galvanised steel sheet 0.8 - 1.2 mm thick
• Front: doors with cylinder lock and two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 6.50 kg
• Material: Galvanised steel sheet 0.8 - 1.2 mm thick
• Front: doors with cylinder lock and two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 6.50 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 1000x550x150 mm
• Front: double door, one leaf secured with two bolts, and the other lockable with a cylinder lock with 2 keys included
• Back: wall made of plywood with a thickness of 6 mm
• Weight 14 kg
• Front: double door, one leaf secured with two bolts, and the other lockable with a cylinder lock with 2 keys included
• Back: wall made of plywood with a thickness of 6 mm
• Weight 14 kg
Metal enclosure designed for flush-mounted installation to protect telecommunications equipment.
• Dimensions: 300x300x120 mm
• Mass: 3.1 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
• Mass: 3.1 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
Metal housing designed for flush mounting, for small and medium-sized antenna systems, in order to protect splitters, taps, amplifiers, power supplies, multiswitches, etc.
• Width x height x depth: 400x400x120 mm
• Weight: 3.7 kg
• Material: galvanized steel sheets, powder-coated (outdoor finish)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
}}
• Weight: 3.7 kg
• Material: galvanized steel sheets, powder-coated (outdoor finish)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
}}
Metal enclosure designed for flush-mounted installation to protect telecommunications equipment.
• Dimensions: 400x500x120 mm
• Mass: 4.9 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
• Mass: 4.9 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
Metal enclosure designed for flush-mounted installation to protect telecommunications equipment.
• Dimensions: 500x500x200 mm
• Mass: 5.8 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
• Mass: 5.8 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
Metal enclosure designed for flush-mounted installation to protect telecommunications equipment.
• Dimensions: 500x400x140 mm
• Mass: 5.3 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
• Mass: 5.3 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
Hermetic cabinet designed for pole or wall mounting. Designed for CCTV installations. Inside the cabinet there is a mounting plate and two DIN rails.
• Designed for CCTV systems
• Mounting to a pole or wall
• Dimensions 210/230/145 mm
• Door protected by gasket, lockable by key
• 6 cable glands (to be punched)
• Incl. 6 cable glands (2x PG13.5, 4x PG9)
• Metal mounting plate (removable)
• Two DIN rails
• Protective wires
• Tightness class IP66
• Mounting to a pole or wall
• Dimensions 210/230/145 mm
• Door protected by gasket, lockable by key
• 6 cable glands (to be punched)
• Incl. 6 cable glands (2x PG13.5, 4x PG9)
• Metal mounting plate (removable)
• Two DIN rails
• Protective wires
• Tightness class IP66
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• The box can be mounted on a pole or wall
• Dimensions 210/230/145 mm
• Door protected with a rubber seal
• Door locked with cylinder lock
• 4 mounting holes
• IP55 rating
• Dimensions 210/230/145 mm
• Door protected with a rubber seal
• Door locked with cylinder lock
• 4 mounting holes
• IP55 rating
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• Mounting on pole or wall
• Dimensions 250/310/145 mm
• Mounting plate 210x260 mm
• Door protected with a gasket
• Doors locked with a key
• 5 cable holes with gaskets
• Protection class IP55
• Dimensions 250/310/145 mm
• Mounting plate 210x260 mm
• Door protected with a gasket
• Doors locked with a key
• 5 cable holes with gaskets
• Protection class IP55
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• Mountable on a wall or pole
• External dimensions: 410/310/145 mm
• Internal mounting plate with size of 360x240 mm
• Door protected with rubber seal
• Door locked with cylinder lock
• 6 cable openings with seals
• IP55 rating
• External dimensions: 410/310/145 mm
• Internal mounting plate with size of 360x240 mm
• Door protected with rubber seal
• Door locked with cylinder lock
• 6 cable openings with seals
• IP55 rating
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• Mounting on pole or wall
• Dimensions 540/310/145 mm
• Mounting plate 510x260 mm
• Door protected with a gasket
• Doors locked with a key
• 7 cable holes with gaskets
• Protection class IP55
• Dimensions 540/310/145 mm
• Mounting plate 510x260 mm
• Door protected with a gasket
• Doors locked with a key
• 7 cable holes with gaskets
• Protection class IP55
The cabinet is made of corrosion-resistant aluminum and designed both for indoor and outdoor use.
• Mounting on mast or wall
• Dimensions: 426/567/369 mm
• RACK brackets
• Doors protected by a seal
• Doors with key lock
• IP55 protection class
• Dimensions: 426/567/369 mm
• RACK brackets
• Doors protected by a seal
• Doors with key lock
• IP55 protection class
Waterproof cabinet designed for a mast or wall mounting, with a mounting plate inside.
• Made of aluminum, corrosion resistant
• Dimensions: 750x595x322 mm
• 5U RACK rails
• Weight 10 kg
• Suitable for mast mounting
• 6 23 mm diameter holes for cable glands
• Glands and rubber gaskets included
• Dimensions: 750x595x322 mm
• 5U RACK rails
• Weight 10 kg
• Suitable for mast mounting
• 6 23 mm diameter holes for cable glands
• Glands and rubber gaskets included
Sealed cabinet designed for mounting to the ground. Ideal as a housing for telecommunications connections.
• Made of aluminum, corrosion resistant
• Dimensions: 1355x295x208 mm
• Weight 5.3 kg
• Dimensions: 1355x295x208 mm
• Weight 5.3 kg
