EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The tape is used when fixing the OK-43 or OK-50 chimney clamp.
• Width: 26 mm
• Thickness: 0.5 mm
• Length: 10 m
• Galvanised
• Designed for OK43 and OK50 holders
• Thickness: 0.5 mm
• Length: 10 m
• Galvanised
• Designed for OK43 and OK50 holders
The reinforced steel banding tool is designed for tensioning and cutting the steel banding.
• Reinforced
• Suitable for 10-20 mm wide steel bands
• Suitable for 10-20 mm wide steel bands
![Steel strap clip 10 mm type Y [100 pieces]](https://www.dipol.com.pl/img/thumbnails/e88813+.jpg/38e91ba5fbf2cdc4f6d204fb45ff5d32.jpg)
A Y-type clip for 10-millimeter wide steel bands.
• Pin type: Y
• Suitable for 10 mm wide strips
• Pack of 100 pcs
• Suitable for 10 mm wide strips
• Pack of 100 pcs
![Steel strap clip 20 mm type Y [100 pieces]](https://www.ostelsat.hu/img/thumbnails/e88814+.jpg/452c2e546122d88e8d6ee8a187eecab1.jpg)
A Y-type clip for 20-millimeter wide steel bands.
• Type: Y
• For 20-milimmeter wide bands
• Packaging: 100 pieces
• For 20-milimmeter wide bands
• Packaging: 100 pieces
![Steel strap clip 10 mm type L [100 pieces]](https://www.dipol.com.pl/img/thumbnails/e88815+.jpg/983d171cdefe534410983ad1c272a404.jpg)
An L-type clip for 10-millimeter wide steel bands.
• Type: L
• For 10-millimeter wide bands
• Packaging: 100 pieces
• For 10-millimeter wide bands
• Packaging: 100 pieces
![Steel strap clip 20 mm type L [100 pieces]](https://www.ostelsat.hu/img/thumbnails/e88816+.jpg/e1c112f350c803d8ce3173992b7f88f7.jpg)
An L-type clip for 20-millimeter wide steel bands.
• Type: L
• For 20-milimmeter wide bands
• Packaging:100 pieces
• For 20-milimmeter wide bands
• Packaging:100 pieces
The steel band is placed in a handy plastic dispenser that serves as its packaging.
• Length: 50 m
• Width: 19 mm
• Thickness: 0.4 mm
• Material: stainless steel AISI 304
• Width: 19 mm
• Thickness: 0.4 mm
• Material: stainless steel AISI 304
The band is used, among others, to install slings, to make straps for fastening brackets and frames on poles.
• Length: 30 m
• Width: 9.5 mm
• Thickness: 0.6 mm
• Material: AISI 430 stainless steel
• Width: 9.5 mm
• Thickness: 0.6 mm
• Material: AISI 430 stainless steel
The band is used, among others, to install slings, to make straps for fastening brackets and frames on poles.
• Length: 50 m
• Width: 10 mm
• Sheet gauge: 0.4 mm
• Material: AISI 304 stainless steel
• Width: 10 mm
• Sheet gauge: 0.4 mm
• Material: AISI 304 stainless steel
The band is used, among others, to install slings, to make straps for fastening brackets and frames on poles.
• Length: 50 m
• Width: 19 mm
• Sheet gauge: 0.7 mm
• Material: AISI 430 stainless steel
• Width: 19 mm
• Sheet gauge: 0.7 mm
• Material: AISI 430 stainless steel
The I-T1500.ES-AL pole bracket is made of aluminum alloys and can be fastened with two 20 mm steel straps or one screw.
• Made of aluminum alloys
• Durable and corrosion resistant
• Can be fastened with 20 mm steel strips or screws
• Durable and corrosion resistant
• Can be fastened with 20 mm steel strips or screws
The I-T1500.PS-AL pole bracket is made of aluminum alloy. It can be mounted to a pole with two steel 20-millimeter wide tape or with one screw.
• Made of aluminium alloys
• Durable and corrosion resistant
• Can be mounted with 20 mm steel strips or bolts
• Durable and corrosion resistant
• Can be mounted with 20 mm steel strips or bolts
Telcom's SS BELG via bracket finds its use in the construction of fibre-optic overhead networks.
• Universal clamp for overhead lines
• Carabiner clip hook
• Carabiner clip hook
Extraction clamp I-ODWAT-22 for flat cables up to 10 mm wide and 4 mm high. Made of stainless steel.
• Dedicated for flat cables
• Maximum cable width: 10 mm
• Made of stainless steel
• Easy to mount
• Maximum cable width: 10 mm
• Made of stainless steel
• Easy to mount
The DROP extraction mount allows the suspension of fibre optic cable with a diameter of 3 - 6 mm and the winding of a short supply.
• For suspending cables with diameter 3-6 mm
• UV-protected plastic
• Place for a short cable reserve
• UV-protected plastic
• Place for a short cable reserve
LINEO pul bracket is designed for the implementation of overhead lines based on cables with a diameter of up to 3.5 mm.
• Range of external cable diameters: 2.5 mm-3.5 mm
• Cable inserted into self-clamping mechanism
• Compact innovative design guarantees correct cable routing
• Mounting to any type of bracket, thanks to the opening catch
• High strength and resistance to weather conditions (temperature, UV radiation)
• Equipped with cable vibration damper
• Patented design
• Cable inserted into self-clamping mechanism
• Compact innovative design guarantees correct cable routing
• Mounting to any type of bracket, thanks to the opening catch
• High strength and resistance to weather conditions (temperature, UV radiation)
• Equipped with cable vibration damper
• Patented design
The anchoring clamp allows the suspension of a cable The body is made of UV-protected plastic. The clamp is designed for round cables with a diameter between 3 and 7 mm.
• For suspension of a cable
• Body made of UV-protected plastic
• For cables with a diameter between 3 and 7 mm
• Minimum breaking force of 3.6 kN
• Body made of UV-protected plastic
• For cables with a diameter between 3 and 7 mm
• Minimum breaking force of 3.6 kN
Lashing clamp designed for cable suspension. Body made of UV-resistant plastic.
• For suspension of a cable
• Body made of UV-protected plastic
• For cables with a diameter between 6 and 9 mm
• Minimum breaking force of 3.6 kN
• Body made of UV-protected plastic
• For cables with a diameter between 6 and 9 mm
• Minimum breaking force of 3.6 kN
I-T1000.PA extraction clamp for cable suspension. Body made of aluminium alloy, wedges made of UV-resistant plastic.
• Lashing bracket for cable suspension
• Designed for cables with a diameter of 8 - 12 mm
• Robust construction - aluminium body, wedges made of UV resistant plastic
• Minimum breaking force: 10 kN
• Designed for cables with a diameter of 8 - 12 mm
• Robust construction - aluminium body, wedges made of UV resistant plastic
• Minimum breaking force: 10 kN
The TELENCO DROP extraction mount allows the suspension of fibre optic cable up to 4 mm in diameter and the winding of a short supply.
• Designed for cables with outer dimension up to 4 mm
• Body made of UV resistant plastic
• Possibility to suspend flat cables
• Body made of UV resistant plastic
• Possibility to suspend flat cables
The anchoring clamp allows the suspension of a cable The body is made of UV-protected plastic. The clamp is designed for round cables with a diameter between 3 and 5.5 mm.
• For suspension of a cable
• Body made of UV-protected plastic
• For cables with a diameter between 3 and 5.5 mm
• Minimum breaking force of 2 kN
• Body made of UV-protected plastic
• For cables with a diameter between 3 and 5.5 mm
• Minimum breaking force of 2 kN
Extraction clamp designed for cable suspension. Body made of robust stainless steel. Suitable for round cables with an external diameter of 3 - 6 mm.
• Handle designed for cable suspension
• Body made of stainless steel with high mechanical resistance
• Designed for round cables with a carrying line of 3 - 6 mm outer diameter
• Minimum breaking load 3 kN
• Body made of stainless steel with high mechanical resistance
• Designed for round cables with a carrying line of 3 - 6 mm outer diameter
• Minimum breaking load 3 kN
The OZ-50 M8 clamp is used to mount antennas to a mast.
• Material: metal
• Cybant diameter: 8 mm
• Sheet thickness: 2.5 mm
• Galvanised
• Cybant diameter: 8 mm
• Sheet thickness: 2.5 mm
• Galvanised
The OZ-60 M8 clamp is used to fix antennas to a mast.
• Material: Metal
• Mast diameter: 60 mm
• U-bolt diameter: 7.2 mm
• Galvanised
• Mast diameter: 60 mm
• U-bolt diameter: 7.2 mm
• Galvanised
Mini M5 antenna mount used to attach the antenna to the mast pipe.
• Maximum mast diameter 40 mm
• Wire diameter 5 mm
• Galvanized
• Wire diameter 5 mm
• Galvanized
Small clamp M6 for mounting an antenna to a mast.
• Maximum mast diameter 40 mm
• Wire diameter 6 mm
• Galvanized
• Wire diameter 6 mm
• Galvanized
Large M6 antenna mount used to attach the antenna to the mast pipe.
• Maximum mast diameter 40 mm
• Wire diameter 6 mm
• Galvanized
• Wire diameter 6 mm
• Galvanized
Clips for mounting the USBC-38/300 bracket to a mast or balcony railing.
• Maximum mast diameter 50 mm
• Wire diameter 8 mm
• Galvanized
• Wire diameter 8 mm
• Galvanized
The 38 mm mast cap is designed to seal and protect the mast from the inside against external conditions.
• Designed for poles with a diameter of 38 mm
• Protects the centre pole from rain, snow
• Protects the centre pole from rain, snow
The blanking plug for the 35-gauge tube has the task of sealing and protecting the mast from the inside against external conditions.
• Designed for poles with a diameter of 35 mm
• Protects the centre pole from rain, snow
• Protects the centre pole from rain, snow
The blanking plug for the fi 40 pipe has the task of sealing and protecting the mast from the inside against external conditions.
• Designed for poles with a diameter of 40 mm
• Protects the centre pole from rain, snow
• Protects the centre pole from rain, snow
The JK-50 E9163 zinc-plated clamp is used for mounting lightning rods to antenna masts/towers.
• Material: metal
• Fully galvanized
• Mast diameter max. 50 mm
• Weight: 0.24 kg
• Fully galvanized
• Mast diameter max. 50 mm
• Weight: 0.24 kg
The package contains 100 anchors as seen in the picture above. Hole diameter - 12 mm. Intended for 8 mm screws. The length of screw - 80 mm, size of the head - 13 mm.
• Hole diameter: 12 mm
• Screw diameter: 8 mm
• Screw length: 80 mm
• Head/wrench size: 13 mm
• Screw diameter: 8 mm
• Screw length: 80 mm
• Head/wrench size: 13 mm
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 2-wire, through version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 2-wire, through version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 2-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 2-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 3-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 3-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 5-wire version
• Installation of wires from 0.14 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 5-wire version
• Installation of wires from 0.14 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
The UY2 double quick-connector (Scotchlok) allows wires to be connected without stripping the insulation.
Designed for low-voltage copper cables.
Designed for low-voltage copper cables.
• Connection of 2 cable conductors
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
