EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The MB-1000 E8740 mast is very convenient for mounting terrestrial TV and communications / Wi-Fi antennas on flat, solid roofs. The installer can use it where there is no possibility of attaching a typical mast to some elements on the roof (there are no suitable chimneys, walls etc.) and the surface...
• Ideal for placing telecommunication and TV antennas on solid flat surfaces
• To be ballasted with 4-8 concrete blocks
• Such concrete blocks (38x24x12 or 38x20x12 or 30x24x12 cm) have to be purchased separately in a local market
• Base frames made of angle sections with 3 mm thickness
• Height: 1 m
• Full size of the base: 58x41 cm
• Plastic cap prevents water from entering the interior of the pipe
• To be ballasted with 4-8 concrete blocks
• Such concrete blocks (38x24x12 or 38x20x12 or 30x24x12 cm) have to be purchased separately in a local market
• Base frames made of angle sections with 3 mm thickness
• Height: 1 m
• Full size of the base: 58x41 cm
• Plastic cap prevents water from entering the interior of the pipe
The MBW-1200 non-invasive ballast mast is suitable for the installation of TV and data antennas.
• The bracket allows mounting to flat, inclined or horizontal surfaces
• Ideally suitable for attaching antennas: WLAN, DVB-T/T2
• Total base dimensions: 580x410 mm
• Mast length: 1,2 m
• Ideally suitable for attaching antennas: WLAN, DVB-T/T2
• Total base dimensions: 580x410 mm
• Mast length: 1,2 m
The MB-3/PLUS E8744 ballast mast base can hold terrestrial TV and communications/Wi-Fi antennas.
• Ideal for attaching antennas: SAT, WLAN, DVB-T/T2
• Hot-dip galvanised throughout.
• External dimensions of the entire base: 2260 x 2260 mm
• Hot-dip galvanised throughout.
• External dimensions of the entire base: 2260 x 2260 mm
The ZB-1500/38+RAM4 non-invasive ballast mast with adjustable mast angle in relation to the ground is designed for the installation of TV antennas, data transmission and CCTV cameras.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Mast length: 1,5 m
• Mast diameter: 38 mm
• Base dimensions: 91,0 x 53,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Mast length: 1,5 m
• Mast diameter: 38 mm
• Base dimensions: 91,0 x 53,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-1000/38+RAM2 non-invasive ballast mast with angle adjustment is suitable for the installation of TV/data antennas or CCTV surveillance cameras.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Mast length: 1 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Mast length: 1 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-500/38+RAM2 non-invasive ballast mast with angle adjustment is suitable for the installation of TV and data antennas.
• Base made of 3 mm thick extrusion-formed steel sheet, with welded steel tube
• Mast length: 0.5 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Mast length: 0.5 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-1100/50+RAM6 non-invasive ballast mast with adjustable angle of the mast in relation to the ground is designed for the installation of satellite dishes.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Designed for mounting satellite dishes
• Mast length: 1,1 m
• Mast diameter: 50 mm
• Base dimensions: 106,0 x 91,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Designed for mounting satellite dishes
• Mast length: 1,1 m
• Mast diameter: 50 mm
• Base dimensions: 106,0 x 91,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-500/50+RAM2 non-intrusive ballast mast with angle adjustment is suitable for the installation of STARLINK satellite data antennas.
• Base made of 3 mm thick extrusion-formed steel sheet, with welded steel tube
• Mast length: 0.5 m
• Mast diameter: 50 mm
• Base dimensions: 93.5 x 42.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• The bracket may be used to mount STARLINK satellite Internet antennas having fi 50 pipe mount
• Mast length: 0.5 m
• Mast diameter: 50 mm
• Base dimensions: 93.5 x 42.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• The bracket may be used to mount STARLINK satellite Internet antennas having fi 50 pipe mount
