English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Video surveillance is one of the basic forms of protecting property. Nowadays, however, new generations of cameras and recorders allow the use of CCTV systems also in other situations. Appropriate cameras and software with image analysis functions connected to other systems allow the automation of several processes and, thanks to artificial intelligence, the identification of people and vehicles.
The CCTV cameras include IP cameras and analog CVI cameras, TVI and AHD cameras, among others. The IP cameras typically operate in an IP network and are connected via switches to the NVRs. The transmission medium here is typically a twisted-pair cable. Analog cameras are usually connected directly to the DVR via coaxial cables or, when using transformers, via twisted-pair.
In addition to cameras and DVRs, the range of products offered by our CCTV range includes all components that make up a CCTV system, such as: coaxial cables and twisted-pair cables, disks, monitors, transformers and power supplies.
The CCTV cameras include IP cameras and analog CVI cameras, TVI and AHD cameras, among others. The IP cameras typically operate in an IP network and are connected via switches to the NVRs. The transmission medium here is typically a twisted-pair cable. Analog cameras are usually connected directly to the DVR via coaxial cables or, when using transformers, via twisted-pair.
In addition to cameras and DVRs, the range of products offered by our CCTV range includes all components that make up a CCTV system, such as: coaxial cables and twisted-pair cables, disks, monitors, transformers and power supplies.
The VHD-15 amplifier/repeater is designed to amplify high resolution AHD, HD-CVI or HD-TVI video signal transmitted over a long distance via a twisted-pair (UTP) or coaxial cable.
A single device compensates the attenuation of about 150 m UTP cable or 300-500 m coaxial cable (depending on the type ...
• Standard:AHD - 4 Mpx, HD-CVI - 1080p, HD-TVI - 5 Mpx, CVBS - PAL / NTSC
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
The xPoE-4-11A-HS has been designed as LAN extender (repeater) and PoE power supply.
• Compact device size
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100Mbps switch)
• Up to 40W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5W)
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100Mbps switch)
• Up to 40W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5W)
