English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Video surveillance is one of the basic forms of protecting property. Nowadays, however, new generations of cameras and recorders allow the use of CCTV systems also in other situations. Appropriate cameras and software with image analysis functions connected to other systems allow the automation of several processes and, thanks to artificial intelligence, the identification of people and vehicles.
The CCTV cameras include IP cameras and analog CVI cameras, TVI and AHD cameras, among others. The IP cameras typically operate in an IP network and are connected via switches to the NVRs. The transmission medium here is typically a twisted-pair cable. Analog cameras are usually connected directly to the DVR via coaxial cables or, when using transformers, via twisted-pair.
In addition to cameras and DVRs, the range of products offered by our CCTV range includes all components that make up a CCTV system, such as: coaxial cables and twisted-pair cables, disks, monitors, transformers and power supplies.
The CCTV cameras include IP cameras and analog CVI cameras, TVI and AHD cameras, among others. The IP cameras typically operate in an IP network and are connected via switches to the NVRs. The transmission medium here is typically a twisted-pair cable. Analog cameras are usually connected directly to the DVR via coaxial cables or, when using transformers, via twisted-pair.
In addition to cameras and DVRs, the range of products offered by our CCTV range includes all components that make up a CCTV system, such as: coaxial cables and twisted-pair cables, disks, monitors, transformers and power supplies.
DS-2CD3143G2-ISU is an IP ceiling camera from Hikvision's Ultra(SmartIP) series.
• Sensor 1/3" Progressive Scan CMOS
• Resolution 4 MP – 2688x1520 @ 25 fps
• Fixed lens 2.8 mm (F1.6)/103°
• Uniform illumination at night with EXIR technology: SmartIR up to 40 m
• Video compression H.265+/H.265/H.264+/H.264/MJPEG
• AcuSense technology (false alarm filter, object classification: human, vehicle)
• Intelligent image analysis VCA based on object classification detection
• Support for microSD cards up to 512 GB
• Three streams supported
• Image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
• Regions of interest ROI: 5
• ANR function
• Applications: HikCentral, iVMS-4200, Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Support for: ONVIF, ONVIF, SDK, ISUP
• Built-in microphone
• Audio in/out: 1/1
• Alarm in/out: 1/1
• Protection degree: IP67, IK10
• 12 VDC or PoE (802.3af) power supply
• Resolution 4 MP – 2688x1520 @ 25 fps
• Fixed lens 2.8 mm (F1.6)/103°
• Uniform illumination at night with EXIR technology: SmartIR up to 40 m
• Video compression H.265+/H.265/H.264+/H.264/MJPEG
• AcuSense technology (false alarm filter, object classification: human, vehicle)
• Intelligent image analysis VCA based on object classification detection
• Support for microSD cards up to 512 GB
• Three streams supported
• Image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
• Regions of interest ROI: 5
• ANR function
• Applications: HikCentral, iVMS-4200, Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Support for: ONVIF, ONVIF, SDK, ISUP
• Built-in microphone
• Audio in/out: 1/1
• Alarm in/out: 1/1
• Protection degree: IP67, IK10
• 12 VDC or PoE (802.3af) power supply
The Hikvision DS-2CD6825G0/C-IS is an IP camera with intelligent image analysis designed to control the flow of people in real time.
• Image resolution 2 MP
• High counting accuracy
• Two 2 mm fixed lenses
• Built-in IR LEDs with up to 6 m range
• Two independent video streams
• Audio interface: 1 input/1 output, built-in microphone
• Alarm interface: 1 input/1 output
• 12 VDC, PoE (802.3af), 8 W power supply
• Manually or automatically generated of daily, monthly and yearly statistics
• Possible integration with external software via ISAPI (e.g. to access the statistics)
• High counting accuracy
• Two 2 mm fixed lenses
• Built-in IR LEDs with up to 6 m range
• Two independent video streams
• Audio interface: 1 input/1 output, built-in microphone
• Alarm interface: 1 input/1 output
• 12 VDC, PoE (802.3af), 8 W power supply
• Manually or automatically generated of daily, monthly and yearly statistics
• Possible integration with external software via ISAPI (e.g. to access the statistics)
Tubular IP Camera: Hikvision DS-2CD3043G2-IU (4 MP, 12 mm, 0.005 lx, IR up to 40 m, Audio, AcuSense)
DS-2CD3043G2-IU is an IP dome camera from Hikvision's Ultra(SmartIP) series.
• Sensor 1/3" Progressive Scan CMOS
• Resolution 4 MP – 2688x1520 @ 25 fps
• Fixed lens 2.8 mm (F1.6)/103°
• Uniform illumination at night with EXIR technology: SmartIR up to 40 m
• Video compression H.265+/H.265/H.264+/H.264/MJPEG
• AcuSense technology (false alarm filter, object classification: human, vehicle)
• Intelligent image analysis VCA based on object classification detection
• Support for microSD cards up to 512 GB
• Three streams supported
• Image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
• Regions of interest ROI: 5
• ANR function
• Applications: HikCentral, iVMS-4200, Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Support for: ONVIF, ISAPI, SDK, ISUP
• Built-in microphone
• Protection rating: IP67
• 12 VDC or PoE (802.3af) power supply
• Resolution 4 MP – 2688x1520 @ 25 fps
• Fixed lens 2.8 mm (F1.6)/103°
• Uniform illumination at night with EXIR technology: SmartIR up to 40 m
• Video compression H.265+/H.265/H.264+/H.264/MJPEG
• AcuSense technology (false alarm filter, object classification: human, vehicle)
• Intelligent image analysis VCA based on object classification detection
• Support for microSD cards up to 512 GB
• Three streams supported
• Image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
• Regions of interest ROI: 5
• ANR function
• Applications: HikCentral, iVMS-4200, Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Support for: ONVIF, ISAPI, SDK, ISUP
• Built-in microphone
• Protection rating: IP67
• 12 VDC or PoE (802.3af) power supply
4 MP camera with fixed-focus, wide-angle lens in a robust metal housing. Built-in microphone.
• 4 MP (2K) resolution
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• Built-in microphone and SD card slot
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• Built-in microphone and SD card slot
4 MP camera with fixed-focus, wide-angle lens in a robust metal housing. Built-in microphone.
• 4 MP (2K) resolution
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• Built-in microphone and SD card slot
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• Built-in microphone and SD card slot
4 MP camera with a motozoom lens in a robust metal housing. Built-in microphone.
• 4 MP (2K) resolution
• Three video streams
• Motozoom lens (2.7-13.5 mm)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 40 m
• Built-in microphone and SD card slot
• Three video streams
• Motozoom lens (2.7-13.5 mm)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 40 m
• Built-in microphone and SD card slot
4 MP camera with fixed-focus, wide-angle lens in a robust metal housing.
• 4 MP (2K) resolution
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• SD card slot
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• SD card slot
Bullet IP Camera: Sunell SN-IPR8140BYBN-B (dark) (4 MP, 2.8 mm, 0.03 lx IR up to 30 m, H.264, black)
4 MP camera with fixed-focus, wide-angle lens in a robust metal housing.
• 4 MP (2K) resolution
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• SD card slot
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• SD card slot
4 MP camera with a motozoom lens in a robust metal housing.
• 4 MP (2K) resolution
• Three video streams
• Motozoom lens (2.7-13.5 mm)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 40 m
• SD card slot
• Three video streams
• Motozoom lens (2.7-13.5 mm)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 40 m
• SD card slot
Quad-system (HD-TVI, HD-CVI, AHD, CVBS) dome camera with 2 Mpix resolution and built-in microphone. Hybrid illuminator.
• Camera resolution of 2 Mpix (1920 x 1080p) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity: 0.01 lux
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 20 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Internal
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity: 0.01 lux
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 20 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Internal
Multi-system dome camera (HD-TVI, HD-CVI, AHD, CVBS), 2 MP resolution with built-in microphone. Hybrid illuminator.
• 2 MP resolution (1920 x 1080p) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• Hybrid illuminator with smart switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• Hybrid illuminator with smart switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
Multi-system dome camera (HD-TVI, HD-CVI, AHD, CVBS), 5 MP (3K) resolution with built-in microphone. Hybrid illuminator.
• 5 MP resolution (1960 x 1665, 3K, 16:9 aspect ratio) at 20 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• Hybrid illuminator with smart switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• Hybrid illuminator with smart switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
Multi-system dome camera (HD-TVI, HD-CVI, AHD, CVBS), 5 MP resolution with built-in microphone. Hybrid illuminator.
• 5 MP resolution (1960 x 1665, 3K, 16:9 aspect ratio) at 20 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• Hybrid illuminator with smart switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• Hybrid illuminator with smart switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) indoor 5 MP dome camera with a built-in microphone. Hybrid illuminator.
• Camera resolution of 5 MP (1960 × 1665, 3K, 16:9) at 20 fps
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 20m, white light up to 20m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 20m, white light up to 20m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
A four-system (HD-TVI, HD-CVI, AHD, CVBS) dome amera with 8 MP (4K) resolution. Hybrid illuminator.
• Camera resolution of 8 MP (4K) (3840 × 2160) at 12.5 fps
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4-system (HD-TVI, HD-CVI, AHD, CVBS) 5 MP dome camera with high sensitivity. Hybrid illuminator. PoC function.
• Camera resolution of 5 MP (1960 × 1665, 3K, 16:9) at 20 fps
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.0005 lx, ColorVu technology
• Lens: 2.8 mm F1.0
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.0005 lx, ColorVu technology
• Lens: 2.8 mm F1.0
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Four-system tube camera (HD-TVI, HD-CVI, AHD, CVBS) with a resolution of 2 Mpix and a built-in microphone. Hybrid illuminator.
• Camera resolution 2 Mpix (1920 x 1080p) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity 0.001 lx, ColorVu technique
• 2.8mm lens
• Hybrid illuminator with intelligent switching (IR up to 20 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via a common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 class) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity 0.001 lx, ColorVu technique
• 2.8mm lens
• Hybrid illuminator with intelligent switching (IR up to 20 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via a common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 class) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 2 MP tubular camera with a built-in microphone. Hybrid illuminator. Plastic housing.
• Camera resolution of 2 MP (1920 × 1080) at 25 fps
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 25 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 25 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 2 MP tubular camera with a built-in microphone. Hybrid illuminator.
• Camera resolution of 2 MP (1920 × 1080) at 25 fps
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 2 MP tubular camera with a built-in microphone. Powerfull hybrid illuminator.
• Camera resolution of 2 MP (1920 × 1080) at 25 fps
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 5 MP tubular camera (3K) with a built-in microphone. Hybrid illuminator. Plastic housing.
• Camera resolution of 5 MP (1960 × 1665, 3K, 16:9) at 20 fps
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 25 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 25 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 5 MP tubular camera (3K) with a built-in microphone. Hybrid illuminator
• Camera resolution of 5 MP (1960 × 1665, 3K, 16:9) at 20 fps
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 5 MP tubular camera with a built-in microphone. Powerfull hybrid illuminator.
• Camera resolution of 5 MP (1960 × 1665, 3K, 16:9) at 20 fps
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Four-system tube camera (HD-TVI, HD-CVI, AHD, CVBS) with a resolution of 2 Mpix and a built-in microphone. Hybrid illuminator.
• Camera resolution 2 Mpix (1920 x 1080p) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity 0.001 lx, ColorVu technique
• 2.8mm F1.0 lens
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone - audio and video transmission via a common cable
• Mechanical infrared filter (ICR)
• Selaed (IP67 class) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity 0.001 lx, ColorVu technique
• 2.8mm F1.0 lens
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone - audio and video transmission via a common cable
• Mechanical infrared filter (ICR)
• Selaed (IP67 class) housing
Multi-system dome camera (HD-TVI, HD-CVI, AHD, CVBS), 2 MP resolution with built-in microphone. Hybrid illuminator.
• 2 MP resolution (1920 x 1080p) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.0005 lx, ColorVu technology
• 2.8 mm lens, F1.0
• Hybrid illuminator with smart switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.0005 lx, ColorVu technology
• 2.8 mm lens, F1.0
• Hybrid illuminator with smart switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
A four-system (HD-TVI, HD-CVI, AHD, CVBS) tube amera with 8 MP (4K) resolution. Hybrid illuminator.
• Camera resolution of 8 MP (4K) (3840 × 2160) at 12.5 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Mechanical IR filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Mechanical IR filter (ICR)
• Sealed (IP67 rated) housing
4-system (HD-TVI, HD-CVI, AHD, CVBS) 5 MP tubular camera with 5 MP (3K) resolution, ColorVu technology and PoC function. Hybrid illuminator.
• Camera resolution of 5 MP (1960 × 1665, 3K, 16:9) at 20 fps
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.0005 lx, ColorVu technology
• Lens: 2.8 mm F1.0
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.0005 lx, ColorVu technology
• Lens: 2.8 mm F1.0
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Hikvision DS-2CE56D0T-IRMF M75028 ceiling camera has been designed for use in CCTV systems based on various types of DVRs. The camera can operate in HD-TVI, HD-CVI, AHD or CVBS video standard. The choice of the standard is performed with the microswitch located on additional cable. The camera genera...
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 2MP dome camera with a built-in microphone. IR up to 30 m.
• Camera resolution 2 MP (1920 x 1080p) at 25 fps
• Built-in microphone - transmission of audio and video over common cable
• Output signal in HD-TVI, AHD, HD-CVI or CVBS standards
• Sensitivity 0.01 lx,
• 2.8 mm lens
• OSD menu control via DVR using signal cable
• Mechanical IR cut filter
• Tight housing (IP67)
• Smart IR illuminator with range up to 30 m (EXIR 2.0)
• Built-in microphone - transmission of audio and video over common cable
• Output signal in HD-TVI, AHD, HD-CVI or CVBS standards
• Sensitivity 0.01 lx,
• 2.8 mm lens
• OSD menu control via DVR using signal cable
• Mechanical IR cut filter
• Tight housing (IP67)
• Smart IR illuminator with range up to 30 m (EXIR 2.0)
Hikvision DS-2CE76H8T-ITMF four-system camera (HD-TVI, HD-CVI, AHD ,CVBS) with 5 MP resolution.
• Image resolution: +++5 MP+++ (2560 x 1944) at 20 fps,
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS,
• Sensitivity: 0.003 lx,
• 2.8 lens,
• WDR: 130 dB,
• OSD menu controlled from DVR via the signal cable,
• Mechanically switching IR filter (ICR),
• Weather-proof housing (IP67),
• Smart IR illuminator (EXIR 2.0) with range up to 30 m.
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS,
• Sensitivity: 0.003 lx,
• 2.8 lens,
• WDR: 130 dB,
• OSD menu controlled from DVR via the signal cable,
• Mechanically switching IR filter (ICR),
• Weather-proof housing (IP67),
• Smart IR illuminator (EXIR 2.0) with range up to 30 m.
Hikvision DS-2CE76H0T-ITMF four-system dome camera (HD-TVI, HD-CVI, AHD ,CVBS) with 5 MP resolution. IR up to 30m.
• Image resolution: 5 MP (2560 x 1944) at 20 fps,
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS,
• Sensitivity: 0.01 lx,
• 2.8 lens,
• OSD menu controlled from DVR via the signal cable,
• Mechanically switching IR filter (ICR),
• Weather-proof housing (IP67),
• Smart IR illuminator (EXIR 2.0) with range up to 30 m.
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS,
• Sensitivity: 0.01 lx,
• 2.8 lens,
• OSD menu controlled from DVR via the signal cable,
• Mechanically switching IR filter (ICR),
• Weather-proof housing (IP67),
• Smart IR illuminator (EXIR 2.0) with range up to 30 m.
Hikvision DS-2CE78H8T-IT3F four-system dome camera (HD-TVI, HD-CVI, AHD ,CVBS) with 5 MP resolution. IR up to 60 m.
• Image resolution: 5 MP (2560 x 1944) at 20 fps,
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS,
• Sensitivity: 0.003 lx,
• 2.8 lens,
• WDR: 130 dB,
• OSD menu controlled from DVR via the signal cable,
• Mechanically switching IR filter (ICR),
• Weather-proof housing (IP67),
• Smart IR illuminator (EXIR 2.0) with range up to 60 m.
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS,
• Sensitivity: 0.003 lx,
• 2.8 lens,
• WDR: 130 dB,
• OSD menu controlled from DVR via the signal cable,
• Mechanically switching IR filter (ICR),
• Weather-proof housing (IP67),
• Smart IR illuminator (EXIR 2.0) with range up to 60 m.
The Hikvision DS-2CE16D0T-IRF M75459 camera can be used in video surveillance systems based on various types of DVRs. The user can select the required video standard from among HD-TVI, HD-CVI, AHD, or the legacy CVBS (ANALOG). The choice of the standard is made by an appropriate setting of the switc...
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 2MP dome camera with a built-in microphone. IR up to 30m.
• Camera resolution 2 MP (1920 x 1080p) at 25 fps
• Built-in microphone - transmission of audio and video over common cable
• Output signal in HD-TVI, AHD, HD-CVI or CVBS standards
• Sensitivity 0.01 lx,
• 2.8 mm lens
• OSD menu control via DVR using signal cable
• Mechanical IR cut filter
• Tight housing (IP67)
• Smart IR illuminator with range up to 30 m (EXIR 2.0)
• Built-in microphone - transmission of audio and video over common cable
• Output signal in HD-TVI, AHD, HD-CVI or CVBS standards
• Sensitivity 0.01 lx,
• 2.8 mm lens
• OSD menu control via DVR using signal cable
• Mechanical IR cut filter
• Tight housing (IP67)
• Smart IR illuminator with range up to 30 m (EXIR 2.0)
Hikvision DS-2CE17H0T-IT3F four-system compact camera (HD-TVI, HD-CVI, AHD ,CVBS) with 5 MP resolution. IR up to 40 m.
• Image resolution: 5 MP (2560 x 1944) at 20 fps,
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS,
• Sensitivity: 0.01 lx,
• 2.8 lens,
• OSD menu controlled from DVR via the signal cable,
• Mechanically switching IR filter (ICR),
• Weather-proof housing (IP67),
• Smart IR illuminator (EXIR 2.0) with range up to 40 m.
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS,
• Sensitivity: 0.01 lx,
• 2.8 lens,
• OSD menu controlled from DVR via the signal cable,
• Mechanically switching IR filter (ICR),
• Weather-proof housing (IP67),
• Smart IR illuminator (EXIR 2.0) with range up to 40 m.
Hikvision DS-2CE78H8T-IT3F four-system compact camera (HD-TVI, HD-CVI, AHD ,CVBS) with 5 MP resolution. IR up to 60m.
• Image resolution: 5 MP (2560 x 1944) at 20 fps,
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS,
• Sensitivity: 0.003 lx,
• 2.8 lens,
• WDR: 130 dB,
• OSD menu controlled from DVR via the signal cable,
• Mechanically switching IR filter (ICR),
• Weather-proof housing (IP67),
• Smart IR illuminator (EXIR 2.0) with range up to 60 m.
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS,
• Sensitivity: 0.003 lx,
• 2.8 lens,
• WDR: 130 dB,
• OSD menu controlled from DVR via the signal cable,
• Mechanically switching IR filter (ICR),
• Weather-proof housing (IP67),
• Smart IR illuminator (EXIR 2.0) with range up to 60 m.
Hikvision DS-2CE19H8T-AIT3ZF M75758 compact camera has been designed for use in CCTV systems based on various types of DVRs. The camera can operate in HD-TVI, HD-CVI, AHD or CVBS video standard. The choice of the standard is performed with the microswitch located on additional cable. The camera gen...
Hikvision DS-7732NI-M4 is a modern 32-channel IP recorder, recording image from IP cameras with a resolution of 32 MP.
• Recording at up to 32 MP
• Supports up to 16 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 1 x VGA
• Independent HDMI 2/VGA outputs
• BNC output
• Maximum input/output data stream – 256/256 Mbps
• Supports 4 SATA III drives up to 16 TB (64 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+)
• Function support: ANR, POS (cash register integration)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 1 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via cloud P2P
• Supports up to 16 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 1 x VGA
• Independent HDMI 2/VGA outputs
• BNC output
• Maximum input/output data stream – 256/256 Mbps
• Supports 4 SATA III drives up to 16 TB (64 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+)
• Function support: ANR, POS (cash register integration)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 1 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via cloud P2P
Hikvision DS-7732NI-M4 is a modern 32-channel IP recorder, recording image from IP cameras with a resolution of 32 MP.
• Recording at up to 32 MP
• Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 1 x VGA
• Independent HDMI 2/VGA outputs
• BNC output
• Maximum input/output data stream – 320/400 Mbps
• Supports 4 SATA III drives up to 16 TB (64 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+)
• Function support: ANR, POS (cash register integration)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 1 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via cloud P2P
• Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 1 x VGA
• Independent HDMI 2/VGA outputs
• BNC output
• Maximum input/output data stream – 320/400 Mbps
• Supports 4 SATA III drives up to 16 TB (64 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+)
• Function support: ANR, POS (cash register integration)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 1 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via cloud P2P
The Hikvision DS-9632NI-I8 is a state-of-the-art 32-channel IP NVR that allows recording video from IP cameras of up to 32 MP resolution.
• Recording at up to 32 MP
• Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Maximum input / output bandwidth – 320/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per drive)
• Support for 8 SATA III drives up to 16 TB
• Disk cloning support for eSATA drive
• Support for cameras with built-in VCA analytics
• Support for cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via cloud P2P
• Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Maximum input / output bandwidth – 320/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per drive)
• Support for 8 SATA III drives up to 16 TB
• Disk cloning support for eSATA drive
• Support for cameras with built-in VCA analytics
• Support for cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via cloud P2P
Hikvision DS-9664NI-M8 is a modern 64-channel IP recorder, recording image from IP cameras with a resolution of 32 MP.
• Recording at up to 32 MP
• Supports up to 64 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Independent outputs HDMI1/HDMI2, VGA1/VGA2 (parallel HDMI1/VGA1 and HDMI2/VGA2)
• BNC output,
• Maximum input/output bandwidth – 400/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per disk)
• Supports 8 SATA III drives up to 16 TB (128 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for a PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Supports up to 64 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Independent outputs HDMI1/HDMI2, VGA1/VGA2 (parallel HDMI1/VGA1 and HDMI2/VGA2)
• BNC output,
• Maximum input/output bandwidth – 400/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per disk)
• Supports 8 SATA III drives up to 16 TB (128 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for a PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via P2P cloud
Hikvision DS-9664NI-M16 is a modern 64-channel IP recorder, recording image from IP cameras with a resolution of 32 MP.
• Recording at up to 32 MP
• Supports up to 64 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Independent outputs HDMI1/HDMI2, VGA1/VGA2 (parallel HDMI1/VGA1 and HDMI2/VGA2)
• BNC output,
• Maximum input/output bandwidth – 400/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per disk)
• Supports 16 SATA III drives up to 16 TB (256 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via cloud P2P
• Supports up to 64 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Independent outputs HDMI1/HDMI2, VGA1/VGA2 (parallel HDMI1/VGA1 and HDMI2/VGA2)
• BNC output,
• Maximum input/output bandwidth – 400/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per disk)
• Supports 16 SATA III drives up to 16 TB (256 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via cloud P2P
Eko series network NVR with AI camera functionality, compact metal housing.
• Recording in resolution up to 4K (12 MP)
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 40 Mbps
• Supports up to 4 Sunell or other manufacturers' IP cameras via Onvif
• 1 slot for SATA drive up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 100 Mbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 40 Mbps
• Supports up to 4 Sunell or other manufacturers' IP cameras via Onvif
• 1 slot for SATA drive up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 100 Mbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
Eko series network NVR with AI camera functionality, compact metal housing.
• Recording in resolution up to 4K (12 MP)
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 56 Mbps
• Supports up to 4 Sunell or other manufacturers' IP cameras via Onvif
• 1 slot for SATA drive up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 100 Mbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 56 Mbps
• Supports up to 4 Sunell or other manufacturers' IP cameras via Onvif
• 1 slot for SATA drive up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 100 Mbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
Eko series network NVR with AI camera functionality, compact metal housing.
• Recording in resolution up to 4K (12 MP)
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 112 Mbps
• Supports up to16 Sunell or other manufacturers' IP cameras via Onvif
• 2 slots for SATA drives up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 1 Gbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 112 Mbps
• Supports up to16 Sunell or other manufacturers' IP cameras via Onvif
• 2 slots for SATA drives up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 1 Gbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
Eko series network NVR with AI camera functionality, compact metal housing.
• Recording in resolution up to 12 MP
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 160 Mbps
• Supports up to16 Sunell or other manufacturers' IP cameras via Onvif
• 2 slots for SATA drives up to 12 TB
• H.265 compression (Smart)/H.264
• Support for intelligent camera functions
• 2 Ethernet 1 Gbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 160 Mbps
• Supports up to16 Sunell or other manufacturers' IP cameras via Onvif
• 2 slots for SATA drives up to 12 TB
• H.265 compression (Smart)/H.264
• Support for intelligent camera functions
• 2 Ethernet 1 Gbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
4-channel multi-system DVR for cameras up to 2 MP with storage on built-in eSSD.
• Supports 4 HD-TVI, AHD cameras at 1080p, 720p at 15 fps or CVBS,
• Supports 2.0 motion detection on 2 channels,
• Supports 1 IP camera,
• Built-in 512GB eSSD.
• Supports 2.0 motion detection on 2 channels,
• Supports 1 IP camera,
• Built-in 512GB eSSD.
8-channel Hikvision DVR for up to 8 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP). Plastic housing.
• HD-TVI signal recording with 8 MP resolution at 8 fps, 5 MP at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
• AcuSense video analytics based on Deep Learning in 4 channels
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 Mpix, Hikvision brand or others via Onvif)
• Possible to replace analog channels via IP in 1:1 ratio
• Extended IP camera support mode (Enhanced IP – excludes VCA analysis)
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• AcuSense video analytics based on Deep Learning in 4 channels
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 Mpix, Hikvision brand or others via Onvif)
• Possible to replace analog channels via IP in 1:1 ratio
• Extended IP camera support mode (Enhanced IP – excludes VCA analysis)
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
8-channel Hikvision DVR for up to 2 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP). Plastic housing.
• Supports 8 HD-TVI, AHD cameras in 1080p, 720p at 15 fps or CVBS
• Supports 2 IP cameras in standard mode, possibility to replace analog channels by IP in 1:1 ratio
• Extended IP camera support mode (Enhanced IP – interferes with VCA functions): 4 IP channels (12 when analog channels are disabled)
• H.265 and H.265+
• Supports 2 IP cameras in standard mode, possibility to replace analog channels by IP in 1:1 ratio
• Extended IP camera support mode (Enhanced IP – interferes with VCA functions): 4 IP channels (12 when analog channels are disabled)
• H.265 and H.265+
4-channel Hikvision DVR for up to 2 MP cameras with 2 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (4 channels) or perimeter protection (8 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (4 channels) or perimeter protection (8 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
8-channel Hikvision DVR for up to 2 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (4 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (4 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
8-channel Hikvision DVR for up to 2 MP cameras with 8 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
4-channel Hikvision DVR for up to 5 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 8 MP resolution at 8 fps (only 1 channel), 5 MP (3K) at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (4 channels) or perimeter protection (8 channels) or face detection and recognition (2 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (4 channels) or perimeter protection (8 channels) or face detection and recognition (2 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
8-channel Hikvision DVR for up to 8 MP cameras with 8 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 8 MP resolution at 8 fps, 5 MP (3K) at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
16 channel Hikvision DVR for up to 8 MP cameras with 8 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 8 MP resolution at 8 fps, 5 MP (3K) at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
16-channel Hikvision DVR for up to 8 MP cameras with 8 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 8 MP resolution at 8 fps, 5 MP (3K) at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
4-channel Hikvision DVR for up to 8 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• Recording HD-TVI signal at 8 MP at 12.5 fps, 5 MP at 20 fps, and for lower resolutions reaches 25 fps
• Supports HD-TVI, AHD or CVBS and IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• AI functions: motion detection 2.0 (4 channels) or perimeter protection (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Supports HD-TVI, AHD or CVBS and IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• AI functions: motion detection 2.0 (4 channels) or perimeter protection (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
Connection cable 1 m for mobile recorders terminated with a socket and M12 plug.
• Length: 1 m
• Joint: M12
• Joint: M12
A 3 m connecting cable for mobile DVRs, terminated with a M12 socket and plug.
• Length 3m
• Connector M12
• Connector M12
A 5 m connecting cable for mobile DVRs, terminated with a M12 socket and plug.
• Length 5 m
• M12 connectors
• M12 connectors
A 10 m connecting cable for mobile DVRs, terminated with a M12 socket and plug.
• Length 10 m
• M12 connectors
• M12 connectors
Additional drive bay for a 2.5" HDD/SSD, intended for Protect DVR.
PROTECT LED KL-1 control panel is used as a monitor of the operating status of a PROTECT mobile DVR and as IR remote control extender.
Outdoor dome camera designed for vehicle video surveillance systems. The 1080p image in AHD standard is compatible with Protect DVRs.
• Compact dimensions for aesthetically pleasing installation inside the vehicle
• AHD signal with 720p resolution
• StarLight sensor with a sensitivity of 0.01 lux
• IP68 rating
• AHD signal with 720p resolution
• StarLight sensor with a sensitivity of 0.01 lux
• IP68 rating
Mobile 4-channel DVR for HDD/SDD recording with a resolution of 1080p. 8 alarm inputs allow integration with sensors. H.265 video compression.
• Maximum recording resolution of 1080p at 25 fps
• Supports 4 channels AHD (1080p or lower) or CVBS (960H or lower) and an IP camera (up to 1080p, 1 RJ-45 connector)
• Recording to 2.5" HDD/SSD with up to 2 TB capacity (1 slot)
• Possibility to copy recordings to an SD card or a flash drive (1 USB 3.0 slot in the front)
• Automatic HDD slot heating to start recording at temperatures from -40°C
• Vibration and shock absorbing design of electronics and drives according to military standard MIL-STD- 810G
• Wide operating temperature range -40°C to 80°C
• Built-in 3-axis G overload sensor
• Built-in 3-axis gyroscope
• GPS module with an external antenna
• Power supply for 4 × AHD cameras
• Power supply backup – the DVR continues to record after a short power failure (up to 8 s) • Automatic recording after power supply is connected
• Supports 4 channels AHD (1080p or lower) or CVBS (960H or lower) and an IP camera (up to 1080p, 1 RJ-45 connector)
• Recording to 2.5" HDD/SSD with up to 2 TB capacity (1 slot)
• Possibility to copy recordings to an SD card or a flash drive (1 USB 3.0 slot in the front)
• Automatic HDD slot heating to start recording at temperatures from -40°C
• Vibration and shock absorbing design of electronics and drives according to military standard MIL-STD- 810G
• Wide operating temperature range -40°C to 80°C
• Built-in 3-axis G overload sensor
• Built-in 3-axis gyroscope
• GPS module with an external antenna
• Power supply for 4 × AHD cameras
• Power supply backup – the DVR continues to record after a short power failure (up to 8 s) • Automatic recording after power supply is connected
Mobile 4-channel DVR for HDD/SDD recording with a resolution of 1080p. 8 alarm inputs allow integration with sensors. H.265 compression, WiFi module.
• Maximum recording resolution of 1080p at 25 fps
• Supports 4 channels AHD (1080p or lower) or CVBS (960H or lower) and an IP camera (up to 1080p, 1 RJ-45 connector)
• Recording to 2.5" HDD/SSD with up to 2 TB capacity (1 slot)
• Possibility to copy recordings to an SD card or a flash drive (1 USB 3.0 slot in the front)
• Built-in dual-band WiFi module (2.4 and 5 GHz) for automatic data synchronization
• Automatic HDD slot heating to start recording at temperatures from -40°C
• Vibration and shock absorbing design of electronics and drives according to military standard MIL-STD- 810G
• Wide operating temperature range -40°C to 80°C
• Built-in 3-axis G overload sensor
• Built-in 3-axis gyroscope
• GPS module with an external antenna
• Power supply for 4 x AHD cameras
• Power supply backup – the DVR continues to record after a short power failure (up to 8 s)
• Automatic recording after power supply is connected
• Supports 4 channels AHD (1080p or lower) or CVBS (960H or lower) and an IP camera (up to 1080p, 1 RJ-45 connector)
• Recording to 2.5" HDD/SSD with up to 2 TB capacity (1 slot)
• Possibility to copy recordings to an SD card or a flash drive (1 USB 3.0 slot in the front)
• Built-in dual-band WiFi module (2.4 and 5 GHz) for automatic data synchronization
• Automatic HDD slot heating to start recording at temperatures from -40°C
• Vibration and shock absorbing design of electronics and drives according to military standard MIL-STD- 810G
• Wide operating temperature range -40°C to 80°C
• Built-in 3-axis G overload sensor
• Built-in 3-axis gyroscope
• GPS module with an external antenna
• Power supply for 4 x AHD cameras
• Power supply backup – the DVR continues to record after a short power failure (up to 8 s)
• Automatic recording after power supply is connected
Outdoor dome camera designed for vehicle video monitoring system. The 1080p AHD image is compatible with the Protect DVRs.
• Compact dimensions for neat installation inside a vehicle
• AHD signal with 1080p resolution
• StarLight sensor with 0.01 lx sensitivity
• Protection class IP68.
• AHD signal with 1080p resolution
• StarLight sensor with 0.01 lx sensitivity
• Protection class IP68.
Mobile 4-channel DVR for SD SDD recording with a resolution of 1080p. 8 alarm inputs allow integration with sensors. H.265 video compression.
Four-channel mobile recorder recording to SD disks with 1080p quality. 8 alarm inputs allow for integration with sensors. H.265 compression, 4G LTE module.
• Recording image and sound of 4 cameras 1080p AHD (1080p or lower) or CVBS (960H or lower) at 25 fps
• Recording - 2 slots for SD cards with a capacity of up to 512 GB each
• Built-in 4G LTE communication module - SIM card slot and antenna
• Built-in GPS module with external antenna
• Built-in 3-axis G-sensor
• Built-in 3-axis gyroscope
• Wide operating temperature range -40^^o^^C to 80^^o^^C
• Power backup - the recorder continues to record image after a short power failure (up to 8 s)
• Automatic recording after connecting the power supply (turning the ignition)
• Recording - 2 slots for SD cards with a capacity of up to 512 GB each
• Built-in 4G LTE communication module - SIM card slot and antenna
• Built-in GPS module with external antenna
• Built-in 3-axis G-sensor
• Built-in 3-axis gyroscope
• Wide operating temperature range -40^^o^^C to 80^^o^^C
• Power backup - the recorder continues to record image after a short power failure (up to 8 s)
• Automatic recording after connecting the power supply (turning the ignition)
Outdoor dome camera designed for vehicle video monitoring system. The 1080p AHD image is compatible with the Protect 804 recorder
• Camera designed for outdoor installation, IP69 rating
• AHD signal with 1080p resolution
• StarLight image sensor with 0.001 lx sensitivity in black and white mode
• AHD signal with 1080p resolution
• StarLight image sensor with 0.001 lx sensitivity in black and white mode
Outdoor dome camera designed for vehicle video monitoring system. The 1080p AHD image is compatible with the Protect DVRs.
• 2 AHD cameras with StarLight sensor with a sensitivity of 0.01 lx and a resolution of 1080p
• Easy to install with adhesive tape and adjustable thanks to the articulated mount
• Easy to install with adhesive tape and adjustable thanks to the articulated mount
The DS-QAZ1307G1T-E is a tube IP speaker from Hikvision used for surveillance systems.
• Power rating: 7 W
• impedance: 8 ohm
• Built-in 2 electret microphones
• Audio functions: AEC, AGC, ANS, DRC
• Audio format support: MP3, WAV
• EMMC 4 GB drive (1 GB for audio files)
• Speech synthesizer: English
• Transmission type: live, scheduled, alarm
• Power output: 12 VDC, 25 mA (max.
• Alarm input: 1
• Power supply: PoE (802.3af)
• Protection rating: IP67
• impedance: 8 ohm
• Built-in 2 electret microphones
• Audio functions: AEC, AGC, ANS, DRC
• Audio format support: MP3, WAV
• EMMC 4 GB drive (1 GB for audio files)
• Speech synthesizer: English
• Transmission type: live, scheduled, alarm
• Power output: 12 VDC, 25 mA (max.
• Alarm input: 1
• Power supply: PoE (802.3af)
• Protection rating: IP67
The DS-QAZ1325G1T is a tube IP speaker from Hikvision used for surveillance systems.
• Power rating: 25 W
• impedance: 8 ohm
• Built-in 2 electret microphones
• Audio functions: AEC, AGC, ANS, DRC
• Audio format support: MP3, WAV
• EMMC 4 GB drive (1 GB for audio files)
• Speech synthesizer: English
• Transmission type: live, scheduled, alarm
• Power output: 12 VDC, 25 mA (max.
• Power supply: 24 VDC
• Protection rating: IP67
• impedance: 8 ohm
• Built-in 2 electret microphones
• Audio functions: AEC, AGC, ANS, DRC
• Audio format support: MP3, WAV
• EMMC 4 GB drive (1 GB for audio files)
• Speech synthesizer: English
• Transmission type: live, scheduled, alarm
• Power output: 12 VDC, 25 mA (max.
• Power supply: 24 VDC
• Protection rating: IP67
HikCentral-P-VSS-Base/0Ch is a basic package for video monitoring of HikCentral Professional software.
• License name: HikCentral-P-VSS-Base/0Ch
• Description: basic package for monitoring system.
• Description: basic package for monitoring system.
HikCentral-P-VSS-1Ch is an extension package for HikCentral Professional software, allowing the connection of 1 CCTV camera.
• License name: HikCentral-P-VSS-1Ch
• Description: Expansion pack - 1 CCTV camera
• Description: Expansion pack - 1 CCTV camera
HikCentral-P-ANPR-1Ch is an extension package for HikCentral Professional software, allowing the connection and management of 1 ANPR camera.
• License name: HikCentral-P-ANPR-1Ch
• Description: Expansion pack - 1 ANPR camera
• Description: Expansion pack - 1 ANPR camera
Power adapter with 5 VDC voltage and 2 A current output, equipped with USB type A connector.
• Output voltage 5 VDC
• Output current 2 A
• USB type A port
• Color: black
• Output current 2 A
• USB type A port
• Color: black
The power cord is used to connect various devices to the AC power network, such as a PC, PoE adapter M1890, IP Power Switch & Watchdog Aviosys N3410. Cord length - 1.5 m.
The extension cord is used to extend AC power cords (of a PC, PoE adapter etc). Cord length: 1.5 m.
The YDY cable consists of three copper conductors insulated from each other with plastic.
• Number of conductors: 3
• Core diameter: 1.5 mm^^2^^
• Type: YDY
• Length 100 m
• Core diameter: 1.5 mm^^2^^
• Type: YDY
• Length 100 m
The YDY cable consists of three copper conductors insulated from each other with plastic.
• Number of conductors: 3
• Core diameter: 2.5 mm^^2^^
• Type: YDY
• Length 100 m
• Core diameter: 2.5 mm^^2^^
• Type: YDY
• Length 100 m
YKY cable is one type of electrical conductor used in low-voltage electrical systems.
• Number of conductors: 3
• Core diameter: 2.5 mm^^2^^
• Type: YKY
• Length: per metre
• Application: outdoor.
• Core diameter: 2.5 mm^^2^^
• Type: YKY
• Length: per metre
• Application: outdoor.
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 2-wire, through version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 2-wire, through version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 2-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 2-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 3-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 3-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 5-wire version
• Installation of wires from 0.14 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 5-wire version
• Installation of wires from 0.14 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
The (Scotchlok) UY2 double quick connector allows you to connect wires without stripping.
• Connection of 2 cable conductors
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
A set of active converters for Ethernet and PoE transmission over coaxial cable, 1 channel 100 Mbps, PoE IN 802.3at/af or Passive (xCOAX3-SW), PoE OUT Passive up to 500 m.
• Transmission range over coaxial cable up to 500 m at 100 Mbps
• Noise immunity and watchdog function in COAX path
• Power supply from switch PoE 802.3at/af or PoE PASSIVE
• Power supply to receiver PoE 802. 3at/af or PoE PASSIVE receivers
up to 30 W total power in the whole power path
• Very low power consumption – 1,35 W for the entire path
• Compact modules
• Clear, optical indication of power and data transmission status
• Easy and quick startup without configuration of parameters
• Noise immunity and watchdog function in COAX path
• Power supply from switch PoE 802.3at/af or PoE PASSIVE
• Power supply to receiver PoE 802. 3at/af or PoE PASSIVE receivers
up to 30 W total power in the whole power path
• Very low power consumption – 1,35 W for the entire path
• Compact modules
• Clear, optical indication of power and data transmission status
• Easy and quick startup without configuration of parameters
ETH10-2wire-SET is a set of active converters designed for Ethernet data and PoE power transmission using only 2 wires.
• A set of converters for Ethernet data and PoE power transmission using 2 wires (e.g. one pair of UTP cable)
• Enables installation of cameras or other IP PoE devices in places where it is difficult or uneconomic to replace the existing wiring
• Power from any PoE switch or 10. ..56 V
• Maximum transmission range is 1000 m, depending on the type, length and cross-section of the cables
• Small size allows easy installation in small spaces, such as in an installation box.
• Enables installation of cameras or other IP PoE devices in places where it is difficult or uneconomic to replace the existing wiring
• Power from any PoE switch or 10. ..56 V
• Maximum transmission range is 1000 m, depending on the type, length and cross-section of the cables
• Small size allows easy installation in small spaces, such as in an installation box.
The active converter kit allows Ethernet data and PoE power to be transmitted over a single pair of cables. Ideal when replacing cabling is not possible or cost-effective.
• Ethernet transmission over any 2 wires of cable
• Transmission of 100 Mbps up to 300 m and 10 Mbps up to 800 m (UTP cable)
• Power supply possible from PoE switch in 802.3af, 802.3at standard or PoE Passive (PoE IN port)
• Clear indication of operation, bandwidth and transmission status
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 1.35 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Transmission of 100 Mbps up to 300 m and 10 Mbps up to 800 m (UTP cable)
• Power supply possible from PoE switch in 802.3af, 802.3at standard or PoE Passive (PoE IN port)
• Clear indication of operation, bandwidth and transmission status
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 1.35 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
LZ-1 is a passive device distributing power from a single power supply source.
LZ-8/POL is a simple DC power supply distributor that provides power from one higher power unit to a number of devices. The distributor splits the input into 8 outputs; each of them is protected by polymer fuse...
Power supply with DC 5.5/2.1 connector (polarity “+” inside) for use with devices powered by 12 VDC and maximum current consumption of 1 A.
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 1 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 1 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
Power supply with DC 5.5/2.1 connector (polarity “+” inside) for use with devices powered by 12 VDC and maximum current consumption of 2 A.
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 2 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 2 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
Power supply with DC 5.5/2.1 connector (polarity “+” inside) for use with devices powered by 12 VDC and maximum current consumption of 3 A.
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 3 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 3 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
Power supply with DC 5.5/2.1 connector (polarity “+” inside) for use with devices powered by 12 VDC and maximum current consumption of 5 A.
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 5 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 5 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with current consumption not exceeding 1A. It is suitable for the majority of CCTV cameras.
• Power supply dedicated for CCTV cameras
• 12 VDC output
• Max load: 1 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
• 12 VDC output
• Max load: 1 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
The M18171 AC/DC adapter dedicated for 12 VDC CCTV cameras operates in switching mode and can be placed outdoors on a wall (due to IP53 rating, the splash-proof housing should be protected by a roof/canopy). The connectors of the camera can be placed inside the housing of the power supply.
Switched-mode power supply designed to power 5 VDC electronic devices equipped with 2.1/5.5 socket ("+" in the midpoint), with current consumption not exceeding 2 A.
Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with total current consumption not exceeding 2A.
• AC/DC adapter dedicated for CCTV cameras
• Output voltage: 12 VDC
• Max output current: 2 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
• Output voltage: 12 VDC
• Max output current: 2 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
Power supply in a sealed IP67 housing with a DC 5.5/2.1 plug (polarity “+” inside).
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 1.5 A
• Protection rating IP67
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 1.5 A
• Protection rating IP67
• Overcurrent protection
• Surge protection
• Short-circuit protection
Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with current total consumption not exceeding 5A. It is suitable for the majority of CCTV cameras.
• AC/DC adapter dedicated for CCTV systems
• 12 VDC output
• Current capacity: 5 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
• 12 VDC output
• Current capacity: 5 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
The power supply unit is dedicated for supplying 12 VDC voltage to CCTV cameras (max total current: 1 A), from AC power network (90-264 VAC, 50-60 Hz).
PSC12015 power supply designed to supply 230 VAC power to cameras in a CCTV system requiring 12 VDC voltage.
• Power supply with 2.1/5.5 socket and cable connector for external mounting
• Output voltage 12V
• Maximum output current 1.5A
• Flush mount
• IP67
• Power supply.
• Output voltage 12V
• Maximum output current 1.5A
• Flush mount
• IP67
• Power supply.
The PSDC08128T M18295 stabilized power supply has been designed to power devices requiring 12 VDC or similar stabilized voltage (within 12...15 VDC range).
• Switching-mode power supply dedicated for CCTV cameras
• Output voltage 12V (DC 12-15V)
• Maximum output current 7A
• 8 outputs with fuses of 1 A each
• Output voltage 12V (DC 12-15V)
• Maximum output current 7A
• 8 outputs with fuses of 1 A each
This power supply is designed to supply CCTV devices requiring a stabilised voltage of 12 VDC.
• Power supply intended for CCTV cameras
• Pulse output voltage 12 V (DC 12 – 15 V)
• Maximum power 180 W
• 16 1 A outputs
• Pulse output voltage 12 V (DC 12 – 15 V)
• Maximum power 180 W
• 16 1 A outputs
The Pulsar AWT8172430 AC/AC transformer of the TRZ 80/U1/U2/U3 series can supply various devices requiring 17 VAC, 24 VAC, or 30 VAC voltage, from 230 VAC power network, with power limit of 80 VA. The transformer is protected in the 230 VAC primary circuit by 0.63 A time-delay fuse (short-circuit pr...
The PSCU04344SEP M1833 power supply has been specially designed for low-voltage systems with long power runs. The power supply provides increased voltage (30...35 VDC, current capacity 4 x 1 A), reduced by DCDC10H M1834 DC/DC converters located by the receivers (cameras). The converters with stable ...
ZR12-100/LZ-8P is a power supply unit designed for mounting in 19" RACK cabinets. The unit provides 12 VDC output voltage available at 8 screw outputs, each with 1 A current capacity. Each output is protected with a polymer fuse and monitored with a green LED (during operation, a dark LED means blow...
ZR12-150/LZ-12 is a power supply unit designed for mounting in 19" RACK cabinets. The unit provides 12 VDC output voltage available at 12 screw outputs, each with 1 A current capacity. Each output is protected with a polymer fuse and monitored with a green LED (during operation, a dark LED means blo...
ZR12-150/LZ-16/POL is a power supply unit designed for mounting in 19" RACK cabinets. The unit provides 12 VDC output voltage available at 16 screw outputs, each with 0.75 A current capacity. Each output is protected with a polymer fuse and monitored with a green LED (during operation, a dark LED me...
The ZBF-12-4A-17Ah M1862 buffer power supply has been designed to ensure continuous supply for devices requiring 12 VDC stabilized voltage (adjustable within 10.5-13.8 V range). Its switch-mode converter shows 74% efficiency and provides stable output DC voltage (+/-1% of the set value, ripple and n...
The MW 7.2-12S rechargeable battery is a maintenance-free lead-acid battery (VRLA). The gases building up during the charging process taking place in this sealed-type battery recombine to form water, which eliminates the need for filling it in. Due to Absorbed Glass Mat (AGM) technology, where the e...
The Securbat CB 7-12 SB rechargeable battery is a maintenance-free lead-acid battery (VRLA). The gases building up during the charging process taking place in this sealed-type battery recombine to form water, which eliminates the need for filling it in. Due to Absorbed Glass Mat (AGM) technology, wh...
Alarmtec BP 7-12 is a maintenance-free valve-regulated lead-acid battery (VRLA).
Acumax AML 7-12 batteries use cutting-edge AGM technology, where the electrolyte is absorbed in highly porous fiber glass separators
placed between the plates.
The MW 18-12S rechargeable battery is a maintenance-free lead-acid battery (VRLA). The gases building up during the charging process taking place in this sealed-type battery recombine to form water, which eliminates the need for filling it in. Due to Absorbed Glass Mat (AGM) technology, where the el...
The Securbat CB 17-12 SB rechargeable battery is a maintenance-free lead-acid battery (VRLA).
• VLRA battery - maintenance-free, does not require maintenance activities such as adding water, checking the electrolyte
• Can work in any position
• Long lasting service life
• Small size
• Slow self-discharge process
• Can work in any position
• Long lasting service life
• Small size
• Slow self-discharge process
Alarmtec BP 18-12 is a maintenance-free valve-regulated lead-acid battery (VRLA).
Acumax AML 18-12 batteries use cutting-edge AGM technology, where the electrolyte is absorbed in highly porous fiber glass separators
placed between the plates.
SWS-60 PoE switch power supply system designed to supply PoE switches with 48 - 53 V DC, 60 W power.
• High efficiency: 90%
• Enclosure: metal, white color (RAL 9003)
• Removable universal mounting plate for quick installation and removal of PoE switches
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Surge protection
• Tamper protection (detection of opening the case)
• Enclosure: metal, white color (RAL 9003)
• Removable universal mounting plate for quick installation and removal of PoE switches
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Surge protection
• Tamper protection (detection of opening the case)
The SWB-60 buffer power supply system is designed for uninterruptible power supply of PoE switches with 52 VDC.
• High efficiency (83%)
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• START button to start the power supply from the battery
• Lightning indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection - protection against opening the housing, against reverse battery connection.
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• START button to start the power supply from the battery
• Lightning indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection - protection against opening the housing, against reverse battery connection.
The ULTIPOWER PoE power supply / injector is designed for powering devices using PoE technology. With this technology, one UTP/FTP cable transmits data and provides power to the connected network device. The compliance with the IEEE802.3af standard enables the user to employ the supplier/injector fo...
Powering devices via PoE
1x PoE port, 1x LAN port
PoE 802.3af standard - max. power 15.4 W
• Powering devices via PoE
• 1x PoE port, 1x LAN port
• PoE 802.3af standard - max. power 15.4 W
• 1x PoE port, 1x LAN port
• PoE 802.3af standard - max. power 15.4 W
The SWB-120 buffer power supply system is designed for uninterruptible power supply of PoE switches with 52 VDC.
• High efficiency (87%)
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• START button to start the power supply from the battery
• Lightning indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• START button to start the power supply from the battery
• Lightning indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection
SWS-150 PoE switch power supply system designed to supply PoE switches with 48 - 53 V DC, 150 W power.
• High efficiency: 85%
• Enclosure: metal, white color (RAL 9003)
• Removable universal mounting plate for quick installation and removal of PoE switches
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Tamper protection (detection of opening the case)
• Enclosure: metal, white color (RAL 9003)
• Removable universal mounting plate for quick installation and removal of PoE switches
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Tamper protection (detection of opening the case)
The ULTIPOWER PoE power supply / injector is designed for powering devices using PoE technology. With this technology, one UTP/FTP cable transmits data and provides power to the connected network device. The compliance with the IEEE802.3at standard enables the user to employ the supplier/injector fo...
A Power supply system for PoE switches with 120 W of power in an ABS enclosure with an IP56 rating.
• High efficiency: 85%
• ABS enclosure with IP56 rating
• Glands allow free cable routing
• Post mountable (requires OZB-4 adapter)
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Surge protection
• Tamper protection (enclosure opening detection).
• ABS enclosure with IP56 rating
• Glands allow free cable routing
• Post mountable (requires OZB-4 adapter)
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Surge protection
• Tamper protection (enclosure opening detection).
Buffer power supply system for uninterruptible power supply of PoE switches with 52 V housed in an IP44-rated ABS enclosure.
• High efficiency (83%)
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• ABS enclosure – IP44
• Fitted cable glands allow free cable routing
• Post mountable (requires OZB-4 adapter)
• Demountable universal mounting plate
• Start button to start the power supply from the battery
• Optical indication
• Battery over-discharge protection
• Short circuit protection (SCP), overload protection (OLP), over voltage protection (OVP, overvoltage protection, tamper protection.
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• ABS enclosure – IP44
• Fitted cable glands allow free cable routing
• Post mountable (requires OZB-4 adapter)
• Demountable universal mounting plate
• Start button to start the power supply from the battery
• Optical indication
• Battery over-discharge protection
• Short circuit protection (SCP), overload protection (OLP), over voltage protection (OVP, overvoltage protection, tamper protection.
The switched-mode power supply is designed to power 52 VDC electronic devices equipped with 2.1/5.5 sockets ("+" in the midpoint), with current consumption up to 1.15 A.
System designed to uninterruptibly power PoE switches with 52 VDC and DVR with 12 VDC with space for two 17 Ah/12 V batteries.
• High efficiency (85%)
• Power supply of 52 V for PoE switches
• Power supply of 12 V for DVR
• Battery charging and maintenance control
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• Optical indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection – protection against opening the housing, against reverse battery connection
• Power supply of 52 V for PoE switches
• Power supply of 12 V for DVR
• Battery charging and maintenance control
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• Optical indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection – protection against opening the housing, against reverse battery connection
Equipped with a PoE adapter, the ULTIPOWER supply is dedicated for powering devices using PoE technology (max. power: 65 W).
The device reduces the voltage at a DC plug to 12 V and simultaneously transfers the PoE power supply to the RJ45 output.
• PoE voltage reduction from 48V to 12V – available at a DC plug (illuminator, microphone, heater)
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
The P-POE2 Splitter allows you to connect two devices with a single UTP Cat. 5e twisted pair cable.
• Transmits power and data to two PoE IP cameras
• Uses UTP cat. 5e twisted pair cable
• Designed to work in 10/100 Mbps networks
• Uses UTP cat. 5e twisted pair cable
• Designed to work in 10/100 Mbps networks
Gigabit PoE splitter with 12 V output, compliant with 802.3af/at/bt, ideal for powering devices with power consumption of up to 40 W.
• Large range of output power up to 40 W
• Power supply to 12 V DVR via PoE 802.3bt or ATTE switch
• Power supply from PoE switch (802.3af/at/bt) or passive PoE (44-56 V)
• High energy efficiency of over 90%
• Suitable for 10/100/1000 Mbps networks
• Compact dimensions for installation in small enclosures
• Power supply to 12 V DVR via PoE 802.3bt or ATTE switch
• Power supply from PoE switch (802.3af/at/bt) or passive PoE (44-56 V)
• High energy efficiency of over 90%
• Suitable for 10/100/1000 Mbps networks
• Compact dimensions for installation in small enclosures
The POE-802.3AF/C M1896 DC-DC converter provides power supply to 12 VDC devices (typically IP CCTV cameras without PoE option), converted from any PoE source (802.3af or 802.3at) distributing 44-57 VDC voltage.
Efficient switched-mode 48 VDC power supply integrated with PoE adapter for powering network devices compliant with PoE 802.3af standard. The powered device, e.g. an IP camera, is to be connected to the POE port, and the network cable (from a switch, a router or a PC) to the LAN port. The cable conn...
• Power supply integrated with PoE adapter,
• Output voltage: 48 VDC,
• Max output current: 500 mA,
• RJ-45 LAN port for connecting to an Ethernet port,
• RJ-45 POE port for connecting a PoE device.
• Output voltage: 48 VDC,
• Max output current: 500 mA,
• RJ-45 LAN port for connecting to an Ethernet port,
• RJ-45 POE port for connecting a PoE device.
The Power over Ethernet (PoE) adapter transmits power to LAN devices via quadded twisted pair cables (e.g. UTP). The application of the PoE injector is a very convenient solution e.g. when there is a need of providing power to an outdoor Access Point from a power supply located indoors.
The set includes two passive PoE devices. They are equipped with RJ-45 and 2.1/5.5mm (power) connectors, and prepared for work with majority of popular WLAN devices
The device can transmit power via Ethernet cables to 4 LAN PoE devices. It is usually used with a buffer power supply (maximum voltage 57 VDC). The injector has 2.1/5.5 DC power socket input for the power supply and a LED signaling its operation.
The adapter enables the user to power 4 network devices via Ethernet cable. The device has DC jack power input (2.1/5.5) that should be connected to a suitable DC power supply with sufficient current capacity, or the power can be distributed to PoE output ports from the LAN1 PoE in/out port (set wit...
The Gigabit Active PoE Adapter can inject power to four LAN devices via twisted-pair cable (e.g. UTP). The power injector is perfectly suited for use with devices requiring PoE supply in the 802.3af or 802.3at standard. It has a DC power socket (2.1/5.5) for connecting an external power supply, e.g....
The Gigabit Active PoE Adapter can inject power to eight LAN devices via twisted-pair cable (e.g. UTP). The power injector is perfectly suited for use with devices requiring PoE supply in the 802.3af or 802.3at standard. It has a DC power socket (2.1/5.5) for connecting an external power supply, e.g...
The MikroTik RBGPOE is a PoE adapter for powering RouterBOARDs via a Gigabit Ethernet port.
• Gigabit Ethernet port
• Power supply voltage - 18 - 57 VDC
• Output voltage - 18 - 57 VDC
• Power supply voltage - 18 - 57 VDC
• Output voltage - 18 - 57 VDC
SMPS power supply integrated with PoE injector. Designed for powering e.g. RouterBoard equipment.
The Mean Well LRS-100-24 industrial switching-mode power supply has been designed for powering control systems, automation and network equipment with stable DC voltage adjustable within 21.6...28.8 VDC range. The maximum load is 100 W, with current limit of 4.5 A.
The Mean Well MDR-60-48 industrial DIN rail switching-mode power supply has been specially designed for powering industrial switches, control systems and automation equipment with stable 48 VDC voltage. The maximum load is 1.25 A.
• 48 VDC, 1.25 A
• Designed for DIN rail mounting
• Dedicated for Ultipower industrial switches
• Designed for DIN rail mounting
• Dedicated for Ultipower industrial switches
The Mean Well MDR-100-48 industrial DIN rail switching-mode power supply has been specially designed for powering industrial switches, control systems and automation equipment.
• 100...240 VAC/48 VDC, 2 A
• DIN rail mounting
• DIN rail mounting
CyberPower OR600ELCDRM1U provides home, office and industrial users with back-up power and protects electronic devices against overvoltages, voltage surges, undervoltages and other power supply problems.
Uninterruptible power supply dedicated to home, office and industrial uses. Built with a full sine wave online architecture.
• Finest quality branded Green Cell UPS,
• Batteries which ensure long backup time, high durability and safety level,
• Advanced control software for easy, quick and intuitive user experience,
• Power output: 1000 VA (900 W),
• Topology: Online,
• Battery: 2 x 12V 9Ah battery - battery backup time at 100% load 3-5 min,
• Battery life: 5 years,
• 6 supply outputs,
• Full sine wave output voltage,
• Audible alarm to indicate power failure, low battery, overload or system failure,
• Replaceable batteries,
• Network protection,
• LCD status display,
• Cold start functionality,
• USB communication port,
• Control software,
• RACK mounting possible.
• Batteries which ensure long backup time, high durability and safety level,
• Advanced control software for easy, quick and intuitive user experience,
• Power output: 1000 VA (900 W),
• Topology: Online,
• Battery: 2 x 12V 9Ah battery - battery backup time at 100% load 3-5 min,
• Battery life: 5 years,
• 6 supply outputs,
• Full sine wave output voltage,
• Audible alarm to indicate power failure, low battery, overload or system failure,
• Replaceable batteries,
• Network protection,
• LCD status display,
• Cold start functionality,
• USB communication port,
• Control software,
• RACK mounting possible.
The CyberPower OR1000 UPS provides uninterrupted power supply for servers, network equipment, video surveillance workstations/NVRs/DVRs and other highly important systems.
The OR1500ERM1U UPS provides uninterrupted power supply for servers, network equipment, etc. with a capacity of 1500 VA.
• Automatic input voltage regulation AVR
• Full digital control based on microprocessor technology
• 6 power outputs
• 19" rackmount
• Power 1000 VA
• GreenPower UPS technology
• Power Management software included
• Programmed protection against overvoltage and undervoltage on mains
• EMI, RFI protection for equipment
• Telephone/DSL line surge protection
• End of Power Schedule
• Full digital control based on microprocessor technology
• 6 power outputs
• 19" rackmount
• Power 1000 VA
• GreenPower UPS technology
• Power Management software included
• Programmed protection against overvoltage and undervoltage on mains
• EMI, RFI protection for equipment
• Telephone/DSL line surge protection
• End of Power Schedule
The CyberPower PR1500ERT2U UPS provides advanced power protection for devices such as servers of high importance, telecom and VoIP equipment, and other mission-critical hardware. Line-interactive UPS topology with AVR (Automatic Voltage Regulation) stabilizes irregular AC input voltage and ensures s...
• Line-interactive topology with pure sine wave at the output
• Automatic Voltage Regulation (AVR)
• Energy Saving technology
• Active PFC power source compatibility
• User-replaceable hot-swap batteries
• 10 AC power outlets
• Programmable brownout and over voltage protection
• Protection against surges and power spikes
• EMI, RFI noise reduction
• LCDPort display of USB communication status
• Serial communication port
• Emergency Power Off (EPO) port
• PowerPanel management software
• Optional SNMP / HTTP remote management (requires additional adapter)
• Rack/tower mounting alternatives
• Automatic Voltage Regulation (AVR)
• Energy Saving technology
• Active PFC power source compatibility
• User-replaceable hot-swap batteries
• 10 AC power outlets
• Programmable brownout and over voltage protection
• Protection against surges and power spikes
• EMI, RFI noise reduction
• LCDPort display of USB communication status
• Serial communication port
• Emergency Power Off (EPO) port
• PowerPanel management software
• Optional SNMP / HTTP remote management (requires additional adapter)
• Rack/tower mounting alternatives
Uninterruptible power supply dedicated to home, office and small installations. Built with the line-interactive architecture.
• Finest quality branded Green Cell UPS,
• Batteries which ensure long backup time, high durability and safety level,
• Advanced control software for easy, quick and intuitive user experience,
• Power output: 600VA (360W),
• Topology: Line-Interactive AVR,
• Battery: 1 x 12V/7Ah,
• Battery life: 5 years,
• LCD status display,
• Cold start functionality,
• USB communication port.
• Batteries which ensure long backup time, high durability and safety level,
• Advanced control software for easy, quick and intuitive user experience,
• Power output: 600VA (360W),
• Topology: Line-Interactive AVR,
• Battery: 1 x 12V/7Ah,
• Battery life: 5 years,
• LCD status display,
• Cold start functionality,
• USB communication port.
The CyberPower UT850EG(FR) UPS provides uninterrupted power supply for computer equipment and other important components of home/SOHO systems. The device uses line-interactive architecture with automatic voltage regulation (AVR) and simulated sine wave output. The UPS is equipped with three AC outle...
The UPS CP900EPFCLCD N9724 power supply unit is recommended for use with DVRs/NVRs, computers and other devices equipped with power supplies with active PFC function.
• Outputs with pure sine wave
• Automatic Voltage Regulation (AVR)
• 3 UPS outputs
• GreenPower UPS technology
• PowerPanel Personal Edition software
• Protection of powered devices from EMI, RFI
• USB port for communication with PC
• Automatic restart and recharging
• Multifunctional LCD display
• Automatic Voltage Regulation (AVR)
• 3 UPS outputs
• GreenPower UPS technology
• PowerPanel Personal Edition software
• Protection of powered devices from EMI, RFI
• USB port for communication with PC
• Automatic restart and recharging
• Multifunctional LCD display
CyberPower BU650E-FR provides home, office and industrial users with back-up power and protects electronic devices against overvoltages, voltage surges, undervoltages and other power supply problems.
MikroTik RB260GS is a 5-port gigabit switch for use in small computer networks. The switch is also equipped with SFP port. The device runs MikroTik SwOS.
The xPoE-4-11A-HS has been designed as LAN extender (repeater) and PoE power supply.
• Compact device size
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100Mbps switch)
• Up to 40W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5W)
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100Mbps switch)
• Up to 40W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5W)
3-port PoE switch 10/100Mbps, extender (1xPoE IN 802.3at/af + 2xPoE OUT), PoE (max 40W), sequential start PoE OUT
• Miniature design for mounting in camera base
• Powered from another PoE switch supporting 802.3at, 802.3af or Passive standard (PoE IN port)
• Power up to 2 PoE receivers 802. 3at/af or Passive (PoE OUT ports)
• Cascade power supply (one switch powers another)
• Strengthens and distributes network signal (fully functional 100Mbps switch)
up to 40W total power
• Easy and fast startup without configuration of parameters
• Wide operating temperature range
• Very low power consumption (< 0.5 W)
• Sequential start of PoE outputs
• Powered from another PoE switch supporting 802.3at, 802.3af or Passive standard (PoE IN port)
• Power up to 2 PoE receivers 802. 3at/af or Passive (PoE OUT ports)
• Cascade power supply (one switch powers another)
• Strengthens and distributes network signal (fully functional 100Mbps switch)
up to 40W total power
• Easy and fast startup without configuration of parameters
• Wide operating temperature range
• Very low power consumption (< 0.5 W)
• Sequential start of PoE outputs
Switch for 5 IP cameras, in outdoor housing, 6-port 10/100Mbps (5xPoE + 1xUplink), PoE power supply on 4 pairs, integrated power supply 55V 90 W.
• Compact size
• Powering 5 PoE 802. 3at/af or PASSIVE receivers
• Power can be switched off on selected PoE ports
• Clear optical indication of power and data transmission status
• Up to 40 W power per single PoE port (total 90W power budget)
• Easy and fast startup without having to configure parameters
• High efficiency of integrated power supply (>90%)
• Additional screw connector makes it easy to pick up 55 VDC power to other devices
• Scalability by attaching additional switches of xPoE/IP series and IPB/IPUPS
• Supply of cables can be hidden inside the enclosure
• Cable exit through 2x29 mm rubber glands installed in the enclosure
• Cables with crimped plugs (after cutting the plugs) can be inserted
• Power cable and 2 brackets included for enclosure installation without compromising the IP55 protection degree
• Powering 5 PoE 802. 3at/af or PASSIVE receivers
• Power can be switched off on selected PoE ports
• Clear optical indication of power and data transmission status
• Up to 40 W power per single PoE port (total 90W power budget)
• Easy and fast startup without having to configure parameters
• High efficiency of integrated power supply (>90%)
• Additional screw connector makes it easy to pick up 55 VDC power to other devices
• Scalability by attaching additional switches of xPoE/IP series and IPB/IPUPS
• Supply of cables can be hidden inside the enclosure
• Cable exit through 2x29 mm rubber glands installed in the enclosure
• Cables with crimped plugs (after cutting the plugs) can be inserted
• Power cable and 2 brackets included for enclosure installation without compromising the IP55 protection degree
PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
PoE switch acting as LAN extender/repeater. Allows the connection of 3 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at, 802.3bt or PoE Passive (PoE IN port)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear operational and identification status indication
• Low power consumption (< 0.5 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear operational and identification status indication
• Low power consumption (< 0.5 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
Gigabit PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
Gigabit, 5-port PoE switch with LAN extender function, ideal for connecting multiple devices (e.g. IP cameras) via a single UTP cable.
• Can be powered from another PoE switch in 802.3af, 802.3at, 802.3bt60, 802.3bt90 or PoE Passive (PoE IN port) standards
• Increases and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 4 PoE 802.3af/at/bt60 receivers
• Up to 90 W total power when powered via UTP
• Throughput of the device at 1000 Mbps
• Clear operating and identification status indication
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Increases and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 4 PoE 802.3af/at/bt60 receivers
• Up to 90 W total power when powered via UTP
• Throughput of the device at 1000 Mbps
• Clear operating and identification status indication
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
The extender set extends the range of the LAN (PoE) on the UTP cable up to 800 m. It is applicable when the PoE switch-receiver distance exceeds 100 m.
• Power supply possible from PoE switch in 802.3af, 802.3at standard, or PoE Passive (PoE IN port)
• Power available to PoE receiver up to 800 m (10 Mbps)
• 100 Mbps available up to a maximum of 500 m
• Clear operating status and bandwidth indication
• Easy and quick start-up without configuring parameters
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Wide operating temperature range
• Power available to PoE receiver up to 800 m (10 Mbps)
• 100 Mbps available up to a maximum of 500 m
• Clear operating status and bandwidth indication
• Easy and quick start-up without configuring parameters
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Wide operating temperature range
The Mercusys MS105G 5-port Gigabit switch finds widespread use in small computer networks. Its Auto MDI/MDIX function allows the installer to stop worrying about the problem of "straightforward" or "crossover" cables.
The Mercusys MS108G 8-port Gigabit switch finds widespread use in small computer networks. Its Auto MDI/MDIX function allows the installer to stop worrying about the problem of "straightforward" or "crossover" cables.
The ULTIPOWER PoE switch is an industrial device enabling smooth data transmission in 10/100 Mbps Ethernet networks. Its five RJ45 ports support auto-negotiation function, four of them can provide power over Ethernet (PoE function). The switch automatically detects PD devices compliant with IEEE 802...
• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Total of five 10/100 Mbps ports
• Four PoE 802.3af/at ports
• Two SFP 100 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30...65℃
• Operating humidity range: 5%...95%
• Functions: Extend, VLAN, PoE Auto Check
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Total of five 10/100 Mbps ports
• Four PoE 802.3af/at ports
• Two SFP 100 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30...65℃
• Operating humidity range: 5%...95%
• Functions: Extend, VLAN, PoE Auto Check
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device enabling smooth data transmission in 10/100/1000 Mbps Ethernet networks.
• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Ethernet ports: 8x FastEthernet 10/100 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s
• PoE ports: 6x 802.3at/af + 2x 802.3at/af HiPoE 90W
• Two SFP 1000 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30℃...65℃
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Ethernet ports: 8x FastEthernet 10/100 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s
• PoE ports: 6x 802.3at/af + 2x 802.3at/af HiPoE 90W
• Two SFP 1000 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30℃...65℃
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device. It is dedicated to systems exposed to intense dusting, high or low temperature.
• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Power consumption without PoE load: <5 W
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s (PD port)
• PoE ports: 4 802.3af/at
• Fibre optic transmission: 2x SFP 1000 Mbps
• ESD protection: 6 kV
• Operating temperature range: -30℃...65℃
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
• Power supply option via UTP/FTP cable through the PD port (max 60 W)
• Input supply voltage: 48-57 VDC
• Power consumption without PoE load: <5 W
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s (PD port)
• PoE ports: 4 802.3af/at
• Fibre optic transmission: 2x SFP 1000 Mbps
• ESD protection: 6 kV
• Operating temperature range: -30℃...65℃
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
• Power supply option via UTP/FTP cable through the PD port (max 60 W)
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: without PoE load: <5 W
• Ethernet ports: 1x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 1
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6kV
• Operating temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: without PoE load: <5 W
• Ethernet ports: 1x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 1
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6kV
• Operating temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres with high or low temperatures.
• Protection degree: IP40
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: without PoE load: <5 W
• Ethernet ports: 2x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 2
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against ESD: 6kV
• Operating temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: without PoE load: <5 W
• Ethernet ports: 2x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 2
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against ESD: 6kV
• Operating temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40
• Power supply: PoE 802.3at (1 port)
• Energy consumption: <5 W (without PoE)
• Ethernet ports: 2x GigabitEthernet 10/100/1000 Mbps
• PoE ports: PD port: 802.3at, PoE 802.3af/at
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -40...75℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Power supply: PoE 802.3at (1 port)
• Energy consumption: <5 W (without PoE)
• Ethernet ports: 2x GigabitEthernet 10/100/1000 Mbps
• PoE ports: PD port: 802.3at, PoE 802.3af/at
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -40...75℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
Industrial PoE Switch: PoE ULTIPOWER 341SFP 4xGE(2x PoE 802.3bt/at/af 90W, 2x PoE 802.3af/at), 1xSFP
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: < 5W (without PoE)
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4: 2x 802.3af/at, 2x 802.3bt/at/af,
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -30...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: < 5W (without PoE)
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4: 2x 802.3af/at, 2x 802.3bt/at/af,
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -30...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40
• Power supply: 48...57 VDC,
• Power consumption: < 5W (without PoE),
• Ethernet ports: 5x GigabitEthernet 10/100/1000 Mbps,
• PoE ports: 4: 4 802.3af/at
• Protected against ESD: 6 kV,
• Operating ambient temperature range: -30...65℃,
• Permissible ambient humidity: 5...95%,
• DIN rail mounting option.
• Power supply: 48...57 VDC,
• Power consumption: < 5W (without PoE),
• Ethernet ports: 5x GigabitEthernet 10/100/1000 Mbps,
• PoE ports: 4: 4 802.3af/at
• Protected against ESD: 6 kV,
• Operating ambient temperature range: -30...65℃,
• Permissible ambient humidity: 5...95%,
• DIN rail mounting option.
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40 ingress protection level
• Input supply voltage: 12-60 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: < 5W (without PoE)
• Ethernet ports: 8x Fast Ethernet 10/100/ Mbps,
• Protection against ESD: 6kV
• Operating temperature range: -35...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 12-60 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: < 5W (without PoE)
• Ethernet ports: 8x Fast Ethernet 10/100/ Mbps,
• Protection against ESD: 6kV
• Operating temperature range: -35...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40 ingress protection level
• Input supply voltage: 12-60 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <5W (
• Ethernet ports: 5x GigabitEthernet 10/100/1000 Mbps
• Protection against ESD: 6kV
• Operating temperature range: -30...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 12-60 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <5W (
• Ethernet ports: 5x GigabitEthernet 10/100/1000 Mbps
• Protection against ESD: 6kV
• Operating temperature range: -30...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switches are industrial devices. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40
• Managed switch
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <20 W (without PoE)
• Ethernet ports: 12x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 12
• Fiber optic transmission: 4x SFP 1000 Mbps
• Protection against electrostatic discharge: 8 kV
• Operating ambient temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Managed switch
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <20 W (without PoE)
• Ethernet ports: 12x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 12
• Fiber optic transmission: 4x SFP 1000 Mbps
• Protection against electrostatic discharge: 8 kV
• Operating ambient temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switches are industrial devices. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40
• Managed switch
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <20 W (without PoE)
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against electrostatic discharge: 8 kV
• Operating ambient temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Managed switch
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <20 W (without PoE)
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against electrostatic discharge: 8 kV
• Operating ambient temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER 0064afat PoE switch is a desktop device enabling smooth data transmission in 10/100 Mbps Ethernet networks. Its six RJ45 ports support auto-negotiation function, four of them provide power over Ethernet (PoE function). The switch automatically detects PD devices compliant with IEEE 802...
• New! Small switch with PoE
• Total of six 10/100 Mbps ports
• Four PoE IEEE802.3af/at ports
• Max capacity of each PoE port: 30 W
• Max total load: 65 W
• Support for auto-learning and auto-aging of MAC addresses (1 K table)
• LED indicators providing information on status/speed/activity/PoE
• Extended mode allowing for connecting PoE devices over distances up to 250 m
• Total of six 10/100 Mbps ports
• Four PoE IEEE802.3af/at ports
• Max capacity of each PoE port: 30 W
• Max total load: 65 W
• Support for auto-learning and auto-aging of MAC addresses (1 K table)
• LED indicators providing information on status/speed/activity/PoE
• Extended mode allowing for connecting PoE devices over distances up to 250 m
The ULTIPOWER PRO0064afat PoE switch is a desktop device enabling smooth data transmission in 10/100 Mbps Ethernet networks. Its six RJ45 ports support auto-negotiation function, four of them provide power over Ethernet (PoE function). The switch automatically detects PD devices compliant with IEEE ...
• 6 x RJ45 10/100 Mb/s ports (4 x PoE included)
• Up to 30 W PoE power supply through 1 port
• Power supply in compliance to IEEE802.3af/at
• Max total load: 65 W
• Up to 30 W PoE power supply through 1 port
• Power supply in compliance to IEEE802.3af/at
• Max total load: 65 W
The PoE switch is a desktop device enabling smooth data transmission in 10/100 Mbps Ethernet networks. Its five RJ45 ports support auto-negotiation function, four of them provide power over Ethernet (PoE function). The switch automatically detects PD devices compliant with IEEE 802.3af standard and ...
• PoE switch ideal for IP CCTV systems
• Five 10/100 Mbps ports
• Four PoE ports
• Max capacity of each PoE port: 15.4 W
• Support for (PD) PoE devices compliant with IEEE802.3af standard
• LED indicators providing information on status/speed/activity/PoE
• Five 10/100 Mbps ports
• Four PoE ports
• Max capacity of each PoE port: 15.4 W
• Support for (PD) PoE devices compliant with IEEE802.3af standard
• LED indicators providing information on status/speed/activity/PoE
The PoE switch enables smooth data transmission. It automatically detects PD devices compliant with IEEE 802.3af standard and provides them with power supply.
• 9 10/100 Mbps RJ-45 ports including 4 x PoE
• PoE power supply up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 62 W
• PoE power supply up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 62 W
The ULTIPOWER 0098af PoE switch is a desktop device enabling smooth data transmission in 10/100 Mbps Ethernet networks. Its nine RJ45 ports support auto-negotiation function, eight of them provide power over Ethernet (PoE function). The switch automatically detects PD devices compliant with IEEE 802...
• Network switch and PoE power supply in one device,
• Nine 10/100 Mbps ports,
• Eight PoE ports,
• Max capacity of each PoE port: 15.4 W
• IEEE802.3af compatible,
• Support for auto-learning and auto-aging, 1k MAC address entries,
• LED indicators providing information on status.
• Nine 10/100 Mbps ports,
• Eight PoE ports,
• Max capacity of each PoE port: 15.4 W
• IEEE802.3af compatible,
• Support for auto-learning and auto-aging, 1k MAC address entries,
• LED indicators providing information on status.
The ULTIPOWER 0288af PoE switch ensures smooth connectivity in 10/100/1000 Mbps Ethernet networks. It has 8x RJ45 10/100 Mbps PoE ports supporting Auto-Negotiation function, RJ45 1000 Mbps port for connecting to access network and 2x SFP 1000 Mbps slots for SFP modules allowing for integration with ...
• PoE switch ideal for IP CCTV systems
• 8x RJ45 10/100 Mbps PoE ports
• 1x RJ45 1000 Mbps port, 2x SFP 1000 Mbps slots
• Max capacity of each PoE port: 15.4 W
• Compliant with IEEE802.3af standard
• 8x RJ45 10/100 Mbps PoE ports
• 1x RJ45 1000 Mbps port, 2x SFP 1000 Mbps slots
• Max capacity of each PoE port: 15.4 W
• Compliant with IEEE802.3af standard
The ULTIPOWER 0154afat PoE switch ensures smooth connectivity in 10/100/1000 Mbps Ethernet networks. It has four RJ45 10/100 Mbps PoE ports supporting Auto-Negotiation function, RJ45 1000 Mbps uplink port for connecting to access network, and SFP 1000 Mbps port for SFP module that will allow for int...
• 1x RJ45 1000 Mbps port (uplink)
• 1x SFP 1000 Mbps slot
• 4x RJ45 10/100 Mbps PoE ports
• Support for PoE powered devices (PD) compliant with IEEE 802.3af/at standard
• Max capacity of each PoE port: 30 W
• Max total PoE load: 65 W
• Support for auto-learning and auto-aging of MAC addresses (1K table)
• LED indicators providing information on status/speed/activity/PoE
• 1x SFP 1000 Mbps slot
• 4x RJ45 10/100 Mbps PoE ports
• Support for PoE powered devices (PD) compliant with IEEE 802.3af/at standard
• Max capacity of each PoE port: 30 W
• Max total PoE load: 65 W
• Support for auto-learning and auto-aging of MAC addresses (1K table)
• LED indicators providing information on status/speed/activity/PoE
The ULTIPOWER 00108afat PoE switch is a desktop device enabling smooth data transmission in 10/100 Mbps Ethernet networks. Its ten RJ45 ports support auto-negotiation function, eight of them provide power over Ethernet (PoE function). The switch automatically detects PD devices compliant with IEEE 8...
{{
• Total of ten 10/100 Mbps ports
• Eight PoE ports (each of them ensuring communication and power supply for a network device via a single UTP cable)
• No need for installation or configuration
• Max capacity of each PoE port: 30 W
Max total load: 110 W
• Support for PoE devices compliant with IEEE802.3af/at standard
• Support for auto-learning and auto-aging of MAC addresses (1 K table)
• LED indicators providing information on status/speed/activity/PoE
• Extended mode allowing for connecting PoE devices over distances up to 250 m
}}
• Total of ten 10/100 Mbps ports
• Eight PoE ports (each of them ensuring communication and power supply for a network device via a single UTP cable)
• No need for installation or configuration
• Max capacity of each PoE port: 30 W
Max total load: 110 W
• Support for PoE devices compliant with IEEE802.3af/at standard
• Support for auto-learning and auto-aging of MAC addresses (1 K table)
• LED indicators providing information on status/speed/activity/PoE
• Extended mode allowing for connecting PoE devices over distances up to 250 m
}}
The ULTIPOWER PRO0208afat PoE switch is a desktop device enabling smooth data transmission in Ethernet networks. Its all RJ45 ports support auto-negotiation function, eight of them (10/100 Mbps) can provide power over Ethernet (PoE function), the other two ports support 10/100/1000 Mbps data rates.
• Two10/100/1000 Mbps ports
• Eight 10/100 Mbps PoE ports
• Max capacity of each PoE port: 30 W
• Max total load: 120 W
• Support for PoE devices compliant with IEEE802.3af/at standard
• Extended mode and PoE Auto Check function
• Eight 10/100 Mbps PoE ports
• Max capacity of each PoE port: 30 W
• Max total load: 120 W
• Support for PoE devices compliant with IEEE802.3af/at standard
• Extended mode and PoE Auto Check function
The ULTIPOWER 2216af PoE manageable switch ensures smooth connectivity in 10/100/1000 Mbps Ethernet networks. It has 19-inch rack-mountable housing, 16x RJ45 10/100 Mbps PoE ports, 2x RJ45 1000 Mbps ports and 2x SFP 1000 Mbps ports (COMBO mode). The 16 PoE ports automatically detect PD devices comp...
The ULTIPOWER 2216af PoE manageable switch ensures smooth connectivity in 10/100/1000 Mbps Ethernet networks. It has 19-inch rack-mountable housing, 24x RJ45 10/100 Mbps PoE ports, 2x RJ45 1000 Mbps ports and 2x SFP 1000 Mbps ports (COMBO mode). The 24 PoE ports automatically detect PD devices comp...
• 24x RJ45 10/100 Mbps PoE ports
• Compliance with IEEE802.3af
• 2x RJ45 1000 Mbps ports
• 2x SFP 1000 Mbps ports
• Manageable switch supporting VLANs
• Compliance with IEEE802.3af
• 2x RJ45 1000 Mbps ports
• 2x SFP 1000 Mbps ports
• Manageable switch supporting VLANs
The ULTIPOWER 0054at PoE switch is a desktop device enabling smooth data transmission in 10/100 Mbps Ethernet networks. Its five RJ45 ports support auto-negotiation function, four of them provide power over Ethernet (PoE function). The switch automatically detects PD devices compliant with IEEE 802....
• Total of five 10/100 Mbps ports, 4x PoE ports included
• Max capacity of each PoE port: 25.5 W
• Support for (PD) PoE devices compliant with IEEE802.3at standard
• Power budget: 120 W
• Max capacity of each PoE port: 25.5 W
• Support for (PD) PoE devices compliant with IEEE802.3at standard
• Power budget: 120 W
Gigabit PoE switch is a device enabling smooth data transmission in networks. The switch automatically detects PD devices compliant with IEEE 802.3af standard and provides them with power supply.
• Eight 10/100/1000 Mbps PoE ports including 8x PoE
• PoE power supply up to 30 W per each PoE port
• Power supply compliant with IEEE802.3at
• Power budget: 125 W
• PoE power supply up to 30 W per each PoE port
• Power supply compliant with IEEE802.3at
• Power budget: 125 W
The ULTIPOWER PoE switches are industrial devices. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Power supply: 100...240 V AC
• Energy consumption: < 15W (without PoE)
• Ethernet ports: 8x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 8 (6x 802.3af/at, 2x 802.3af/at/bt)
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -10...50℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Energy consumption: < 15W (without PoE)
• Ethernet ports: 8x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 8 (6x 802.3af/at, 2x 802.3af/at/bt)
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -10...50℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
![Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [100 m]](https://www.dipol.com.pl/img/thumbnails/e1005_100+.jpg/3485ddf65185708132bcd177ab8bdd94.jpg)
TRISET 302 Eca Tri-shield type in PVC jacket intended for the construction of TV/SAT systems. Fire reaction class in accordance with CPR - Eca.
• Compliant with class A+ standard
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• PVC jacket
• Low attenuation
• Excellent matching
• High screening efficiency – in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• PVC jacket
• Low attenuation
• Excellent matching
• High screening efficiency – in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [250 m]](https://www.dipol.pt/img/thumbnails/e1005_250+.jpg/f551947d3c11807563d82b17a636d7cd.jpg)
TRISET 302 Eca Tri-shield type made in PVC jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Eca.
• Compliant with class A+ standard
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipol.pt/img/thumbnails/e1005_500+.jpg/2c64860f51cff4dcded36ce1f3dbeaeb.jpg)
TRISET 302 Eca Tri-shield type made in PVC jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Eca.
• Compliant with class A+ standard
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Dca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipol.pt/img/thumbnails/e1006_500+.jpg/e99b5303bd58db2e71d6f663ec303518.jpg)
TRISET 302 Dca, Tri-shield type, made with LSZH jacket, intended for the construction of RTV/SAT installations. Reaction to fire class according to CPR - Dca-s2, d1, a1.
• Compliant with the class A+ standard
• Flammability class Dca-s2, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Dca-s2, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 B2ca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1007_500+.jpg/dbcf7cbabe1881edb010590046b3e334.jpg)
TRISET 302 B2ca, Tri-shield type, made with LSZH jacket, intended for the construction of RTV/SAT installations. Reaction to fire class according to CPR - B2ca-s1a, d1, a1.
• Compliant with the class A+ standard
• Flammability class B2ca-s1a, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class B2ca-s1a, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Fca class A+ 1.02/4.6/7.0 110 dB [100 m]](https://www.dipol.com.pl/img/thumbnails/e1008_100+.jpg/b86956f9c39f6480aa44d79932f2a4a2.jpg)
TRISET 302 Fca Tri-shield type, external made in PE jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant with class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Fca class A+ 1.02/4.6/7.0 110 dB [250 m]](https://www.dipol.com.pl/img/thumbnails/e1008_250+.jpg/753ed42ed78da9dd670a0377e49b1f70.jpg)
TRISET 302 Fca Tri-shield type, external made in PE jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant with class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Fca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1008_500+.jpg/8bce782df80cc7d49b4dcb3f97ca1df6.jpg)
TRISET 302 Fca Tri-shield type, external made in PE casing intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant to class A+ standard
• Flammability class Fca
• Copper core 1,02 mm
• Conductor of tri-shield construction
• Made in PE sheath
• Outdoor cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A+++
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1,02 mm
• Conductor of tri-shield construction
• Made in PE sheath
• Outdoor cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A+++
• Min. 77% braid coverage
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [1 m]](https://www.dipolnet.com/img/thumbnails/e1015+++.jpg/0d08ac94851f35a0e1e5b02f5f7afe44.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• Sold per meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• Sold per meters
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 [100 m]](https://www.dipolnet.com/img/thumbnails/e1015_100+.jpg/2e94b5d9ca3b921cde798644fb9d48d5.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 100 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 100 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [200 m]](https://www.dipolnet.com/img/thumbnails/e1015_200+.jpg/7d2b29aae19d7398dd79d3c23fff19fe.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 200 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 200 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1015_500+.jpg/5cbcfe3443448c1c49311d7f0f0c1713.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 500 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 500 meters
![Coaxial cable (75 ohm, class A+): TRISET PLUS Dca LSZH<br>1,13/4,8/6,8 110 dB [100 m]](https://www.dipolnet.com/img/thumbnails/e1016_100+.jpg/2eedcd00a5cb9c30d78c338d11e8dae0.jpg)
High quality TRISET PLUS coaxial cable is dedicated for individual and community antenna systems. Complies with A+ class requirements.
• Complies with A+ class requirements
• Reaction to fire class compliant with CPR - Dca-s2, d1, a1
• Triple shield Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath
• Passed IEC 68-2-3 Steady State Damp Heat test
• 1.13 mm copper core
• Low loss
• Excellent impedance matching
• High screening efficiency - meeting the class A++ requirements in most of the range
• 81% braid coverage
• 5-year warranty
• Reaction to fire class compliant with CPR - Dca-s2, d1, a1
• Triple shield Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath
• Passed IEC 68-2-3 Steady State Damp Heat test
• 1.13 mm copper core
• Low loss
• Excellent impedance matching
• High screening efficiency - meeting the class A++ requirements in most of the range
• 81% braid coverage
• 5-year warranty
![Coaxial cable (75 ohm, class A+): TRISET PLUS Dca LSZH<br>1,13/4,8/6,8 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1016_500+.jpg/99096c8956274c118003137e395dd9ab.jpg)
High quality TRISET PLUS coaxial cable is dedicated for individual and community antenna systems. Complies with A+ class requirements.
• Conforms to Class A+ standard
• Reaction to fire class in accordance with CPR - Dca-s2, d1, a1
• Made in LSZH jacket (LS0H) - halogen-free insulation
• Triple screen - first Al/PET/SY foil bonded to dielectric + 81% braid + second Al/PET foil bonded to jacket
• Conforms to IEC68-2 part 3 accelerated ageing standard
• Copper core 1.13 mm
• Low attenuation
• Excellent fit
• High screening efficiency - fulfils class A+++ requirement in most of the range
• 81% braid coverage
• 5 year warranty
• Reaction to fire class in accordance with CPR - Dca-s2, d1, a1
• Made in LSZH jacket (LS0H) - halogen-free insulation
• Triple screen - first Al/PET/SY foil bonded to dielectric + 81% braid + second Al/PET foil bonded to jacket
• Conforms to IEC68-2 part 3 accelerated ageing standard
• Copper core 1.13 mm
• Low attenuation
• Excellent fit
• High screening efficiency - fulfils class A+++ requirement in most of the range
• 81% braid coverage
• 5 year warranty
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1 m]](https://www.dipol.pt/img/thumbnails/e1017+++++.jpg/782994682fbddbafd1bb9347813dd94e.jpg)
High-quality TV/satellite coax (A-class, 16.65 dB/100 m at 860 MHz) in PE sheath, gel-filled. For outdoor applications.
• Suitable for all types of installations - especially for terrestrial and satellite TV networks
• PE-coated outer cable
• Resistant to UV radiation
• Gel to hinder the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1,13 mm
• 81% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• Sale by the metre
• PE-coated outer cable
• Resistant to UV radiation
• Gel to hinder the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1,13 mm
• 81% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• Sale by the metre
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [100 m]](https://www.dipolnet.com/img/thumbnails/e1017_100+.jpg/c61841699c220bcc8e47b237c6988d24.jpg)
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 100 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 100 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [200 m]](https://www.dipolnet.com/img/thumbnails/e1017_200+.jpg/c9c81b6521075a285f88726b86d7ebb1.jpg)
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 200 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 200 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1017_500+.jpg/be4b32041c6ba5e4995497236dd2560c.jpg)
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 500 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 500 meters
![Coaxial Cable (75 ohm, class A++): TRISET B2CA 120 dB 1.05/4.6/6.9 [1 m]](https://www.dipol.com.pl/img/thumbnails/e1020_1+.jpg/fd33a05505d1af3532b6403cb0144100.jpg)
TRISET B2CA is suitable for MATV/SMATV antenna systems in public buildings. Reaction to fire class acc. to CPR - B2ca-s1a,d1,a1.
• Compliant with class A+++ standard
• Braided 82% tinned copper
• 10 dB higher interference suppression compared to class A+
• Tin-plated copper braid resistant to oxidation
• Copper core 1.05 mm
• Low attenuation
• High screening efficiency
• 82% braid coverage
• 10-year warranty
• LSOH-coated cable
• CPR-compliant reaction to fire class - B2ca-s1a,d1,a1
• Braided 82% tinned copper
• 10 dB higher interference suppression compared to class A+
• Tin-plated copper braid resistant to oxidation
• Copper core 1.05 mm
• Low attenuation
• High screening efficiency
• 82% braid coverage
• 10-year warranty
• LSOH-coated cable
• CPR-compliant reaction to fire class - B2ca-s1a,d1,a1
![TRISET B2CA LSZH 75 ohm coaxial cable class A++ 1.05/4.6/6.9 120 dB [500 m].](https://www.dipol.com.pl/img/thumbnails/e1020_500+.jpg/783223e5fce8cf9a0a929918207856a6.jpg)
TRISET B2CA is suitable for MATV/SMATV antenna systems in public buildings. Reaction to fire class acc. to CPR - B2ca-s1a,d1,a1.
• Complies with Class A++ standard
• Braid coverage 82% - tinned copper
• Interference attenuation 10 dB higher than Class A+
• Copper tinned braid resistant to oxidation
• Complies with requirements of MTBiGM regulation
• Copper core 1,05 mm
• Low attenuation
• High shielding effectiveness
• 82% braid coverage
• 10 year warranty
• SoH coated cable
• Fire response class in accordance with CPR - B2ca-s1a,d1,a1
• Braid coverage 82% - tinned copper
• Interference attenuation 10 dB higher than Class A+
• Copper tinned braid resistant to oxidation
• Complies with requirements of MTBiGM regulation
• Copper core 1,05 mm
• Low attenuation
• High shielding effectiveness
• 82% braid coverage
• 10 year warranty
• SoH coated cable
• Fire response class in accordance with CPR - B2ca-s1a,d1,a1
![Coaxial Cable (75 ohm): Triset-11 PE 1.63/7.2/10.2, 100 dB (Fca, class A, gel-filled) [100 m]](https://www.dipol.com.pl/img/thumbnails/e1025_100+.jpg/5529721acf4446b7459fa06d9274e37c.jpg)
TRISET-11 PE (outdoor) double-shielded coaxial cable type RG11 with the internal conductor made of copper wire with a diameter 1.65 mm.
• Bus cable
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 100 metres
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 100 metres
![Coaxial Cable (75 ohm): Triset-11 PE 1.65/7.2/10, 100 dB (Fca, class A, gel-filled) [300 m]](https://www.dipolnet.com/img/thumbnails/e1025_300+.jpg/88c4672880815cdc20e35a3da5c0543a.jpg)
TRISET-11 PE (outdoor) double-shielded coaxial cable type RG11 with the internal conductor made of copper wire with a diameter 1.65 mm.
• Bus cable
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 300 metres
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 300 metres
![Coaxial Cable (75 ohm): TRISET-11 HF 1.65/7.2/10 [200 m] (class A+, halogen-free)](https://www.dipolnet.ro/img/thumbnails/e1027_200+.jpg/94ffd0895050e944df71237466f764eb.jpg)
RG-11/TRISET-11 HF (halogen-free insulation) designed for the construction of RTV/SAT installations. It does not spread flame, smoke emission is very low and emitted gases are not corrosive.
• Bus cable
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath.
• CPR class: Cca
• 200 metres
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath.
• CPR class: Cca
• 200 metres
![Coaxial Cable (75 ohm, class A): TRISET-11 Cca LSZH 1.63/7.2/10.2 100 dB [300 m]](https://www.dipolnet.ro/img/thumbnails/e1027_300+.jpg/93c52370aa00b0dab11bf791e03341b8.jpg)
TRISET-11 HF (halogen-free insulation) dedicated to SMATV systems. It does not spread flame, smoke emission is very low and the released gases are not corrosive.
• Bus cable
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Cca
• 300 metres
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Cca
• 300 metres
NETSET U/UTP Category 5e twisted pair cable is the top quality twisted pair designed for professional indoor systems.
• Type of cable: U/UTP
• Category 5e
• Flammability class: B2ca
• Application: indoor
• PVC coating
• Wire diameter 0.49 mm (24 AWG)
• Carton 305 m
• Category 5e
• Flammability class: B2ca
• Application: indoor
• PVC coating
• Wire diameter 0.49 mm (24 AWG)
• Carton 305 m
![CAT 5e UTP Cable: NETSET U/UTP 5e [1m], indoor](https://www.dipolnet.com/img/thumbnails/e1408_1+.jpg/a630cf52df7a992e9e56e9545070da55.jpg)
NETSET U/UTP cat 5e E1408 is a top quality indoor UTP cable (twisted-pair cable) designed for use in computer networks.
Key features of NETSET UTP cat 5e E1408:
- top quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
- preliminary quality control of materia...
![CAT 5e UTP Cable: NETSET BOX U/UTP 5e [305m], indoor](https://www.dipolnet.com/img/thumbnails/e1408_305+.jpg/188e1484f397d90baef9c211d5b16e6f.jpg)
The NETSET BOX U/UTP CAT 5e cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).
• Cat.5e cable for indoor use
• Parameters far exceeding the requirements for Category 5+ twisted pair cables
• Solid wires of 0.50 mm diameter (24 AWG),
• Thoroughly tested by a national laboratory and notified body
• Easy application - unreel box, meter markings
• 15-year quality guarantee
• Parameters far exceeding the requirements for Category 5+ twisted pair cables
• Solid wires of 0.50 mm diameter (24 AWG),
• Thoroughly tested by a national laboratory and notified body
• Easy application - unreel box, meter markings
• 15-year quality guarantee
![Cat 5 UTP Cable: NETSET BOX U/UTP 5e (indoor) [500m]](https://www.dipol.com.pl/img/thumbnails/e1408_500+.jpg/ac61ede939e81b2f87ddd78f10793c3f.jpg)
The NETSET BOX U/UTP CAT 5e cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).
• Cat 5e cable for indoor applications
• Parameters far exceeding the requirements for Category 5+ twisted pair cables
• Solid wires of 0.50 mm diameter (24 AWG),
• High quality confirmed by tests conducted by National Institute of Telecommunications in Warsaw, Poland
• Parameters far exceeding the requirements for Category 5+ twisted pair cables
• Solid wires of 0.50 mm diameter (24 AWG),
• High quality confirmed by tests conducted by National Institute of Telecommunications in Warsaw, Poland
![Twisted-pair cable: NETSET Lite U/UTP 5e [305m], Cu, 0.45 mm.](https://www.dipolnet.com/img/thumbnails/e1409_305+++.jpg/51f1525c68566f19e91c8bac34aa0d83.jpg)
The NETSET Lite U/UTP Category 5e twisted pair cable is dedicated for building simple network systems.
• Cable type: U/UTP
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.45 mm
• Core material: copper
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.45 mm
• Core material: copper
![Cat 5e UTP Cable: NETSET U/UTP 5e <br>(outdoor - gel-filled, black) [1m]](https://www.dipolnet.com/img/thumbnails/e1410_1+.jpg/a4a81cb97d9b1d5e5946fd9b4574e645.jpg)
NETSET UTPw 5e E1410 is a top quality outdoor UTP cable (twisted-pair cable) designed for use in computer networks.
Main features:
- highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee;
- preliminary quality control of materials and thorough tests of t...
![CAT 5e UTP Cable: NETSET BOX U/UTP 5e <br>(outdoor - gel-filled, black) [305m]](https://www.dipol.com.pl/img/thumbnails/e1410_305+.jpg/275219395bf9beba159cefa36587df33.jpg)
NETSET BOX UTPw 5e E1410 is a top quality outdoor UTP cable (twisted-pair cable) designed for use in computer networks.
Main features:
- highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee;
- preliminary quality control of materials and thorough tests ...
• Can be installed in damp conditions
• Pairs twisted together in gel
• Jacket made of black PE (polyethylene)
• 305 meters, packed in pull box
• 15-year warranty
• Pairs twisted together in gel
• Jacket made of black PE (polyethylene)
• 305 meters, packed in pull box
• 15-year warranty
![Cat 5e UTP Cable: NETSET U/UTP PE (outdoor) [1m]](https://www.dipol.com.pl/img/thumbnails/e1412_1+.jpg/5d0f0016367a10aea3405e28c052ce9a.jpg)
NETSET UTP PE 5e E1412 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the ground. H...
![CAT 5e UTP Cable: NETSET BOX U/UTP PE (outdoor) [305 m]](https://www.dipol.com.pl/img/thumbnails/e1412_305+.jpg/d3aa6bfff64795aad29b313689bcbf7c.jpg)
NETSET BOX UTP PE 5e E1412 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the groun...
• Hose for outdoor use, without gel
• PE coating resistant to UV radiation
• Quality confirmed by tests at the Central Research Laboratory of the Communications Institute in Warsaw
• 305 m self-expanding carton
• 15 year warranty
• PE coating resistant to UV radiation
• Quality confirmed by tests at the Central Research Laboratory of the Communications Institute in Warsaw
• 305 m self-expanding carton
• 15 year warranty
![CAT 5e UTP Cable: NETSET BOX U/UTP 5e [305m] (indoor, Dca-s1,d2,a1)](https://www.dipol.sk/img/thumbnails/e1414_305+.jpg/4d076eb9744a66af90621126e87e298f.jpg)
The NETSET BOX U/UTP CAT 5e cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).
{{
• highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee
• reaction to fire: Dca-s1,d2,a1
• preliminary quality control of materials and thorough tests of the final product
• meter markers, deviation less than 0.5%
• solid wires of 0.49 mm diameter (24 AWG)
• wire insulation made of homogeneous, colored HDPE; outer diameter: 0.87 mm
• sheath made of LSZH material, diameter of 5 mm
• packed in 305-meter self dispensing box
• highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee
• reaction to fire: Dca-s1,d2,a1
• preliminary quality control of materials and thorough tests of the final product
• meter markers, deviation less than 0.5%
• solid wires of 0.49 mm diameter (24 AWG)
• wire insulation made of homogeneous, colored HDPE; outer diameter: 0.87 mm
• sheath made of LSZH material, diameter of 5 mm
• packed in 305-meter self dispensing box
![NETSET U/FTP 5e shielded twisted-pair cable, indoor use [1m]](https://www.dipolnet.ro/img/thumbnails/e1515_1+.jpg/52a026ed24d4b3e3ecf959462a2b40e4.jpg)
The NETSET F/UTP CAT 5e is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: F/UTP
• Category 5e
• Applications: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Sold by the meter
• Category 5e
• Applications: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Sold by the meter
![CAT 5e FTP Shielded Cable: NETSET BOX F/UTP 5e [305m], indoor](https://www.dipolnet.ro/img/thumbnails/e1515_305+.jpg/38b1eca8e5019a9912871f4792ea3eb6.jpg)
NETSET FTP 5e E1515_305 is a top quality indoor FTP cable (twisted-pair cable) designed for use in computer networks.
Distinguishing features:
- highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
- preliminary quality control of materials and thoroug...
• Top quality shielded indoor FTP cable
• Insulated wires twisted in pairs, protected with polyester foil
• Shielding layer made of aluminum foil
• Sheath made of PVC, of 6.3 mm diameter
• Highest-quality materials
• Supplied in 305 m cable reel box
• 15-year quality guarantee
• Insulated wires twisted in pairs, protected with polyester foil
• Shielding layer made of aluminum foil
• Sheath made of PVC, of 6.3 mm diameter
• Highest-quality materials
• Supplied in 305 m cable reel box
• 15-year quality guarantee
![Cat5e Shielded Cable: NETSET BOX F/UTP 5e [1m], outdoor](https://www.dipol.sk/img/thumbnails/e1517_305+++.jpg/1aa3e823056582cd075b41a79e0c0c9e.jpg)
NETSET BOX F/UTP 5e E1517_1 is a top quality cat. 5e outdoor cable (foil-shielded twisted-pair cable) designed for use in professional computer networks outside buildings. The shielding layer made of aluminum foil allows to minimize crosstalk and interference with the external environment. The sheat...
![Cat5e Shielded Cable: NETSET BOX F/UTP 5e [305m], outdoor](https://www.dipol.sk/img/thumbnails/e1517_305+.jpg/37e76cbe392c50176ed00ff2a4cf3aed.jpg)
• Screened Cat.5e FTP cable for outdoor use
• Black PE sheath resistant to UV radiation and humidity
• All wires protected with polyester foil and shielded with aluminum foil
• Parameters confirmed by the tests performed in Telecommunications Equipment Testing Laboratory of the National Institute of Telecommunications in Warsaw, Poland
• Sold in 305 m unreel box
• 15-year quality guarantee
• Black PE sheath resistant to UV radiation and humidity
• All wires protected with polyester foil and shielded with aluminum foil
• Parameters confirmed by the tests performed in Telecommunications Equipment Testing Laboratory of the National Institute of Telecommunications in Warsaw, Poland
• Sold in 305 m unreel box
• 15-year quality guarantee
![Cat5e Shielded Cable: NETSET F/UTP 5e [1m] (PE, outdoor, with messenger wire)](https://www.dipol.com.pl/img/thumbnails/e1519_500+++.jpg/05dca64684c703a8274f325fedb068fa.jpg)
NETSET F/UTP 5e E1519_1 is a top quality cat. 5e outdoor cable (foil-shielded twisted-pair cable) designed for use in professional computer networks outside buildings. The shielding layer made of aluminum foil minimizes crosstalk and interference with the external environment. The cable is intended ...
• highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
• parameters far exceeding the requirements for Category 5e twisted pair cables,
• preliminary quality control of materials and thorough tests of the final product,
• solid wires of 0.5 mm diameter (24 AWG),
• wire insulation made of homogeneous, colored PE; outer diameter: 1.0 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
• insulated wires twisted in pairs, protected with polyester foil,
• aluminum shielding layer and grounding wire,
• sheath made of black PE of 6.4 mm external diameter,
• meter markers - length error less than 0.5%,
• messenger wire diameter: 1.2 mm.
• parameters far exceeding the requirements for Category 5e twisted pair cables,
• preliminary quality control of materials and thorough tests of the final product,
• solid wires of 0.5 mm diameter (24 AWG),
• wire insulation made of homogeneous, colored PE; outer diameter: 1.0 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
• insulated wires twisted in pairs, protected with polyester foil,
• aluminum shielding layer and grounding wire,
• sheath made of black PE of 6.4 mm external diameter,
• meter markers - length error less than 0.5%,
• messenger wire diameter: 1.2 mm.
![Cat5e Shielded Cable: NETSET F/UTP 5e [500m] (PE, outdoor, with messenger wire)](https://www.dipol.com.pl/img/thumbnails/e1519_500+.jpg/c005d32963d41cc29dd07c0696405e51.jpg)
NETSET F/UTP 5e E1519_500 is a top quality cat. 5e outdoor cable (foil-shielded twisted-pair cable) designed for use in professional computer networks outside buildings. The shielding layer made of aluminum foil minimizes crosstalk and interference with the external environment. The cable is intende...
![CAT 6 Cable: NETSET BOX U/UTP 6 (indoor) [1m]](https://www.dipol.com.pl/img/thumbnails/e1608_305+++.jpg/df36ca01f208b728c876d1154dcafe64.jpg)
NETSET BOX U/UTP E1608 is the highest-quality twisted pair cable designed for data transmission systems inside buildings (LANs, structural cabling etc). Its outer diameter has been reduced to 6.0 mm, which considerably facilitates installation of the data cable in trays and pipes. Special insulation...
![CAT 6 UTP Cable: NETSET BOX U/UTP 6 (indoor) [305m]](https://www.dipolnet.com/img/thumbnails/e1608_305+.jpg/d1a0d00fd9618ca3e12077288aa2d562.jpg)
NETSET BOX U/UTP E1608 is the highest-quality twisted pair cable designed for data transmission systems inside buildings (LANs, structural cabling etc). Its outer diameter has been reduced to 6.0 mm, which considerably facilitates installation of the data cable in trays and pipes. Special insulation...
• High quality UTP Cat. 6 cable for indoor use
• PVC sheath
• Thoroughly tested by a national laboratory and notified body
• Easy application - unreel box, meter markings
• 15-year quality guarantee
• PVC sheath
• Thoroughly tested by a national laboratory and notified body
• Easy application - unreel box, meter markings
• 15-year quality guarantee
![NETSET BOX U/UTP Cat. 6 indoor twisted pair cable [500m]](https://www.dipolnet.ro/img/thumbnails/e1608_500+.jpg/0191b99ee18f6499036eb5832bf992d2.jpg)
NETSET U/UTP Category 6 twisted pair cable is the top quality twisted pair designed for professional indoor systems.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• 500 m drum
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• 500 m drum
![CAT 6 UTP Cable: NETSET BOX U/UTP PE (outdoor) [1m]](https://www.dipolnet.com/img/thumbnails/e1610_305+.jpg/9596ddb9259eead966140be128aa123f.jpg)
NETSET BOX U/UTP PE Cat. 6 E1610 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors.
![CAT 6 UTP Cable: NETSET BOX U/UTP PE (outdoor) [305m]](https://www.dipol.com.pl/img/thumbnails/e1610_305+++.jpg/462a3bd430375fca07c11dc68d1359d2.jpg)
NETSET BOX U/UTP PE Cat. 6 E1610 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the...
• highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
• preliminary quality control of materials and thorough tests of the final product
• meter markers, length error less than 0.5%,
• solid wires of 0.54 mm diameter (24 AWG),
• wire insulation made of homogeneous, colored PE; outer diameter: 0.94 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
• insulated wires twisted in pairs of 2.02 mm diameter,
• sheath made of black PE, outer diameter of 6.0 mm.
• preliminary quality control of materials and thorough tests of the final product
• meter markers, length error less than 0.5%,
• solid wires of 0.54 mm diameter (24 AWG),
• wire insulation made of homogeneous, colored PE; outer diameter: 0.94 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
• insulated wires twisted in pairs of 2.02 mm diameter,
• sheath made of black PE, outer diameter of 6.0 mm.
The NETSET U/UTP cat. 6 gel filled is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: U/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
The NETSET U/UTP cat. 6 gel filled is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: U/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
![Cat 6 UTP Cable: NETSET F/UTP LSZH Dca s2 d2 a1 [500m]](https://www.dipolnet.com/img/thumbnails/e1612_500+.jpg/c4ffafed0bf27b8f5a4f11a67beaa7b1.jpg)
The NETSET F/UTP CAT 6 is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: F/UTP
• Category 6
• Applications: indoors
• LSZH sheath
• Reaction to fire: Dca-s2,d2,a1
• Conductor diameter 0.51 mm (24 AWG)
• 500 m spool
• Category 6
• Applications: indoors
• LSZH sheath
• Reaction to fire: Dca-s2,d2,a1
• Conductor diameter 0.51 mm (24 AWG)
• 500 m spool
The NETSET F/UTP cat. 6 gel-filled is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: F/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
The NETSET F/UTP cat. 6 gel-filled is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: F/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
![CAT 6 UTP Cable: NETSET BOX U/UTP CAT 6 [305m] (indoor, Dca-s2,d2,a1)](https://www.dipol.com.pl/img/thumbnails/e1614_305+.jpg/4aae5c80332300ae7bcfd56aabe1c59c.jpg)
The NETSET cable comes from the latest generation of UTP twisted pair cables. Its external diameter has been reduced to 5.9 mm, which considerably facilitates insertion of the cable into ducts and pipes. Special insulation material makes it easier to attach RJ-45 connectors.
• highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee
• reaction to fire: Dca-s2,d2,a1+
• parameters far exceeding the requirements for Category 6 twisted pair cables
• preliminary quality control of materials and thorough tests of the final product
• meter markers, deviation less than 0.5%
• solid wires of 0.54 mm diameter
• wire insulation made of homogeneous, colored HDPE; outer diameter: 0.97 mm
• external diameter of 5.9 mm
• packed in 305-meter self dispensing box.
• reaction to fire: Dca-s2,d2,a1+
• parameters far exceeding the requirements for Category 6 twisted pair cables
• preliminary quality control of materials and thorough tests of the final product
• meter markers, deviation less than 0.5%
• solid wires of 0.54 mm diameter
• wire insulation made of homogeneous, colored HDPE; outer diameter: 0.97 mm
• external diameter of 5.9 mm
• packed in 305-meter self dispensing box.
The NETSET U/UTP cat. 6 is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: U/UTP
• Category 6
• Uses: indoors
• LSZH sheath
• Fire class B2ca-s1a-d1-a1
• Conductor diameter 0.55 mm (24 AWG)
• Category 6
• Uses: indoors
• LSZH sheath
• Fire class B2ca-s1a-d1-a1
• Conductor diameter 0.55 mm (24 AWG)
NETSET U/FTP Category 6A twisted pair cable is the highest quality twisted pair cable designed for professional indoor installations.
• Cable type: U/FTP
• Category 6A
• Application: interior
• Flammability class B2ca s1a,d1,a1
• Conductor diameter 0.57 mm (23 AWG)
• Roll of 500 m
• Category 6A
• Application: interior
• Flammability class B2ca s1a,d1,a1
• Conductor diameter 0.57 mm (23 AWG)
• Roll of 500 m
The NETSET U/UTP cat. 6A is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: U/UTP
• Category 6A
• Uses: indoors
• Fire class B2ca s1a, d1, a1
• Conductor diameter 0.565 mm•
• 500-metre reel
• Category 6A
• Uses: indoors
• Fire class B2ca s1a, d1, a1
• Conductor diameter 0.565 mm•
• 500-metre reel
![CAT 7 S/FTP Shielded Cable: NETSET BOX S/FTP CAT 7 [500m] (indoor, Cca s1a d1 a1)](https://www.dipol.com.pl/img/thumbnails/e1626_500+.jpg/a28d2045190b2c3ef5e50643e9693a48.jpg)
The CAT 7 NETSET S/FTP shielded cable is a high-quality cable designed for professional indoor data transmission systems. Made of braid and foil, the shielding allows to minimize crosstalk and interference with the external environment.
• highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
• parameters far exceeding the requirements for Category 7 twisted pair cables
• preliminary quality control of raw materials and thorough tests of the final product,
• meter markers,
• solid wires, 0.56 mm in diameter (23 AWG),
• wire insulation made of skin-foam-skin PE; diameter: 0.56 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
• insulated, screened wires twisted in pairs,
• sheath made of LSZH, 7.6 mm external diameter,
• meter markers - length error less than 0.5%.
• parameters far exceeding the requirements for Category 7 twisted pair cables
• preliminary quality control of raw materials and thorough tests of the final product,
• meter markers,
• solid wires, 0.56 mm in diameter (23 AWG),
• wire insulation made of skin-foam-skin PE; diameter: 0.56 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
• insulated, screened wires twisted in pairs,
• sheath made of LSZH, 7.6 mm external diameter,
• meter markers - length error less than 0.5%.
![CCTV Cable: CAMSET/YAR 75-0.59/3.7+2*0.50 (2 power wires up to 230 VAC) [100 m]](https://www.dipol.com.pl/img/thumbnails/m5995_100+.jpg/ca3e147173863fc35b13aa7ca0dcdc04.jpg)
CAMSET/YAR M5995 is a high quality CCTV cable used for transmitting baseband video and supplying power to cameras or other CCTV devices. Its copper conductors ensure low resistance and attenuation.
• Version of RG-59 cable for CCTV systems
• Dedicated for indoor applications
• Two power wires up to 230 VAC
• Copper core and braid of the coaxial cable
• Thorough tests of the final product
• 6-year quality guarantee
• Meter marking
• Dedicated for indoor applications
• Two power wires up to 230 VAC
• Copper core and braid of the coaxial cable
• Thorough tests of the final product
• 6-year quality guarantee
• Meter marking
Junction box dedicated for Sunell cameras. Allows camera mounting, hiding connection cables and additional accessories.
• Mounting and connection box for Sunell cameras
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
Junction box dedicated for Sunell cameras. Allows camera mounting, hiding connection cables and additional accessories.
• Mounting and connection box for Sunell cameras
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
Junction box dedicated for Sunell cameras. Allows camera mounting, hiding connection cables and additional accessories.
• Mounting and connection box for Sunell cameras
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
Junction box dedicated for Sunell cameras. Allows camera mounting, hiding connection cables and additional accessories.
• Mounting and connection box for Sunell cameras
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
Junction box dedicated for Sunell cameras. Allows camera mounting, hiding connection cables and additional accessories.
• Mounting and connection box for Sunell cameras
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66,
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66,
Mount with a pole adapter, designed for mounting cameras on a pole with a diameter of 130-152 mm.
• Load capacity: 4 kg
• Pole diameter: 80-150 mm
• Material of construction: steel and aluminium
• Pole diameter: 80-150 mm
• Material of construction: steel and aluminium
The DS-1661ZJ bracket is designed for HIKVISION cameras. It is made of aluminum alloy and is used for mounting of PTZ cameras on the ceiling.
• Color: white
• Ceiling mount
• Made of aluminum alloy
• Application: indoor and outdoor
• Compatibility: Hikvision PTZ cameras (except DS-2AE-714)
• Dimensions: dia. 116.5 x 200 mm
• Maximum load: 30 kg
• Weight: 0.94 kg
• Ceiling mount
• Made of aluminum alloy
• Application: indoor and outdoor
• Compatibility: Hikvision PTZ cameras (except DS-2AE-714)
• Dimensions: dia. 116.5 x 200 mm
• Maximum load: 30 kg
• Weight: 0.94 kg
The DS-1271ZJ-140 ceiling mount is designed for HIKVISION cameras. Made of aluminum alloy, it allows to mount the dome camera on the ceiling.
• Color: white
• Ceiling mounting
• Construction: aluminum alloy
• Maximum load: 4.5 kg
• Dimensions: 150 x 565 mm
• Weight: 1.63 kg
• Ceiling mounting
• Construction: aluminum alloy
• Maximum load: 4.5 kg
• Dimensions: 150 x 565 mm
• Weight: 1.63 kg
Hikvision DS-1271ZJ-120 ceiling mount, made of aluminum alloy, has been designed for dome cameras of that manufacturer.
The DS-1259ZJ junction box is designed for mounting ceiling HIKVISION cameras. It enables the installer to mount the camera at an angle and hide connections. The box is dedicated for cameras from the DS-2CD21XX series.
The DS-1281ZJ-M junction box is designed for mounting ceiling HIKVISION cameras. It enables the installer to mount the camera at an angle and hide connections.
DS-1258ZJ wall mount made of plastics has been designed for HIKVISION cameras of DS-2CD21xx series. A large space inside the bracket allows for placing connections there.
The DS-1250ZJ protective shade has been designed for use with dome cameras mounted on walls. The plastic shade additionally protects the camera against precipitation and dirt.
The DS-1273ZJ-140 wall mount is designed for HIKVISION ceiling cameras.
• Color: white
• Wall mounting
• Made of aluminum alloy
• Dimensions: Φ140 × 183.5 × 232 mm
• • Maximum load: 4.5 kg
• Weight: 0.71 kg
• Wall mounting
• Made of aluminum alloy
• Dimensions: Φ140 × 183.5 × 232 mm
• • Maximum load: 4.5 kg
• Weight: 0.71 kg
The DS-1272ZJ-110 TRS M5134 wall bracket has been designed for HIKVISION dome/ceiling cameras. A large space inside is usually used for placing cable connections. The mount is made of aluminum.
The DS-1273ZJ-135 M5135 wall bracket has been designed for HIKVISION cameras of DS-2CD21xx series. A large space inside is usually used for placing cable connections. The mount is made of aluminum. Dimensions: 120 ×122 ×169 mm.
The DS-1272ZJ-110 black wall mount is designed for HIKVISION cameras.
• Color: black
• Wall mounting
• Material: aluminum alloy
• For wall mounting of a dome camera and hiding cable connections
• Maximum load: 4.5 kg
• Wall mounting
• Material: aluminum alloy
• For wall mounting of a dome camera and hiding cable connections
• Maximum load: 4.5 kg
Metal bracket designed for mounting Hikvision CCTV cameras on walls. The DS-1272ZJ-120 mount made of aluminum alloy is suitable for dome cameras and protects cable connections.
Metal bracket designed for mounting Hikvision CCTV cameras on walls. The DS-1273ZJ-130-TRL mount made of aluminum alloy is suitable for dome cameras and protects cable connections.
The DS-1473ZJ-155B M51391 wall mount is designed for HIKVISION cameras. It is made of aluminum alloy and is used for mounting of dome cameras on the wall.
• Color: white
• Wall mounting
• Made of aluminum alloy
• Dimensions: Dia. 155 x 243 300
• Maximum load: 3 kg
• Water resistant design
• Wall mounting
• Made of aluminum alloy
• Dimensions: Dia. 155 x 243 300
• Maximum load: 3 kg
• Water resistant design
![Corner camera mount Marathon MN-40C [galvanized]](https://www.ostelsat.hu/img/thumbnails/m5140c+.jpg/ed829a50f8558f0fe72174d525303a77.jpg)
Universal bracket used to mount one camera on the corner of a building.
• Corner installation
• Possibility to pass wires
• Possibility to pass wires
Metal mount designed for mounting Hikvision CCTV cameras (up to 10 kg) on corners.
The DS-1276ZJ-SUS mount allows for corner installation of Hikvision cameras, with a maximum camera weight of 10 kg.
• Color: white
• Corner mounting
• Construction: stainless steel
• Dimensions: 126 x 105 x 250 mm
• Weight: 2.4 kg
• Corner mounting
• Construction: stainless steel
• Dimensions: 126 x 105 x 250 mm
• Weight: 2.4 kg
The DS-1275ZJ-S-SUS mount allows you to install Hikvision cameras on poles 67-127 mm in diameter, with a maximum camera weight of 10 kg.
• Color: white
• Pole mounting
• Construction: stainless steel
• Dimensions: 144 x 132 x 44 mm
• Weight: 0.8 kg
• Pole mounting
• Construction: stainless steel
• Dimensions: 144 x 132 x 44 mm
• Weight: 0.8 kg
The DS-1275ZJ-SUS pole mount enables the installation of Hikvision CCTV cameras on poles with a diameter from 67 to 127 mm. The maximum load of the mount is 10 kg.
The DS-1475ZJ-SUS pole mount enables the installation of Hikvision CCTV cameras on poles with a diameter from 67 to 127 mm. The maximum load of the mount is 10 kg.
DS-1604ZJ-BOX is a wall bracket with mounting box made of aluminum alloy. The bracket is designed for mounting of Hikvision PTZ cameras.
• Color: white
• Wall-mounted
• Material: aluminum alloy
• Maximum load: 10 kg
• Dimensions: 395 x 281 x 170 mm
• Weight: 2.15 kg
• Wall-mounted
• Material: aluminum alloy
• Maximum load: 10 kg
• Dimensions: 395 x 281 x 170 mm
• Weight: 2.15 kg
RACK brackets dedicated for placing DVRs/NVRs from DS-76xx series DS-72xx with height 1U and 380 mm depth in 19" RACK cabinets. The brackets are suitable for the devices with 8 - 32 channels with one HDD or two HDDs. The set contains two brackets and mounting screws. Weight: 0.1 kg.
![Marathon MK-61B bracket for mounting cameras on masts/posts with diameter of 30 to 105 mm [black].](https://www.dipol.com.pl/img/thumbnails/m5173b+.jpg/25ed41be859259d463343cec0282486b.jpg)
Universal bracket for mounting one or two cameras on masts or poles.
![Marathon MK-61C bracket for mounting cameras on masts/posts with diameter of 30 to 105 mm [galvanized].](https://www.dipol.com.pl/img/thumbnails/m5173c+.jpg/462ecf09091431b65c699f334500c3d8.jpg)
Universal bracket for mounting one or two cameras on masts or poles.
![Marathon MK-61W bracket for mounting cameras on masts/posts with diameter of 30 to 105 mm [white]](https://www.dipol.com.pl/img/thumbnails/m5173w+.jpg/d0f43ed03c2d054c221816b135b29a00.jpg)
Universal bracket for mounting one or two cameras on masts or poles.
The OR-150/T M5181 powder-painted steel clamp allows for mounting a camera on a pole/post with a diameter from 70 to 280 mm. The clamp is fixed to the pole with steel strips (1 meter long) and is suitable for cameras with four mounting holes (large adjustment range).
The clamp with a mounting plate is designed for mounting sealed enclosures on elements such as poles, towers and structural elements.
• It makes it possible to mount Pulsar power supplies on poles, towers, etc.
The housing is used to protect the DVR from unauthorized access or theft.
• Application: digital CCTV DVRs
• Dimensions of DVR space: W1=375, H1=335, D1=95 [mm, +/-2]
• Tamper protection: tamper – opening of the housing and optional detachment from the wall
• Surface-mounted, lockable
• Vertical DVR mounting.
• Dimensions of DVR space: W1=375, H1=335, D1=95 [mm, +/-2]
• Tamper protection: tamper – opening of the housing and optional detachment from the wall
• Surface-mounted, lockable
• Vertical DVR mounting.
The DS-1260ZJ junction box is designed for HIKVISION cameras of DS-2CD26xxF series and can hold video transformers/baluns, connections etc. Diameter: 89 mm, depth: 20 mm, weight: 1 kg.
The DS-1260ZJ mounting and connection box (black) is designed for use with HIKVISION cameras of the DS-2CD26xxF-I series.
• Black colour
• Wall or ceiling mounting
• Made: aluminum alloy
• Allows you to hide cable connections
• Wall or ceiling mounting
• Made: aluminum alloy
• Allows you to hide cable connections
DS-1280ZJ-DM junction box made of metal has been designed for HIKVISION cameras of DS-2CD21xx series. A large space inside the box allows for placing connections there.
The DS-1280ZJ-DM18 junction box is designed for HIKVISION DS-2CD21xx series cameras.
• Black junction box for DS-2CD21xx series cameras
• Material: aluminum alloy
• Maximum load: 4.5 kg
• Material: aluminum alloy
• Maximum load: 4.5 kg
The DS-1280ZJ-DM21 junction box is designed for HIKVISION dome cameras K1737, K1738 and can hold video transformers/baluns, connections etc. It also shelters them from adverse effects of the weather (IP66). Weight: 1 kg.
The DS-1280ZJ-DM46 (black) junction box is designed for HIKVISION dome cameras.
• Color: black
• Wall or ceiling mounting
• Material: aluminum alloy
• Covers cable connections
• Wall or ceiling mounting
• Material: aluminum alloy
• Covers cable connections
The DS-1280ZJ-DM8 junction box is designed for HIKVISION DS-2CD23x3G2 series dome cameras.
• Material: aluminum alloy
• Mounting: flat surface
• Waterproof design
• Maximum load capacity: 1 kg
• Mounting: flat surface
• Waterproof design
• Maximum load capacity: 1 kg
The DS-1280ZJ-DM8 (black) junction box is designed for HIKVISION DS-2CD23x3G2 series dome cameras.
• Material: aluminum alloy
• Mounting: flat surface
• Waterproof design
• Colour: black
• Maximum load capacity: 1 kg
• Mounting: flat surface
• Waterproof design
• Colour: black
• Maximum load capacity: 1 kg
The DS-1280ZJ-PT6 junction box is designed for HIKVISION dome cameras.
• Color: white
• Wall or ceiling mounting
• Material: aluminum alloy
• Covers cable connections
• Wall or ceiling mounting
• Material: aluminum alloy
• Covers cable connections
The DS-1280ZJ-S installation box has been designed for HIKVISION compact IP cameras.
The DS-1280ZJ-M junction box is designed for mounting dome/ceiling HIKVISION cameras. The box is made of metal and can hold video transformers/baluns, connections etc. It weights 0.6 kg and can carry load up to 4.5 kg. The box can be used outdoors.
The DS-1280ZJ-XS junction box is designed for mounting ceiling and compact (bullet) HIKVISION cameras. The box is made of metal and can hold video transformers/baluns, connections etc. It weights 0.3 kg and can carry load up to 4.5 kg. The box can be used outdoors.
The DS-1280ZJ-XS junction box is designed for mounting ceiling and compact (bullet) HIKVISION cameras. The box is made of metal and can hold video transformers/baluns, connections etc. It weights 0.3 kg and can carry load up to 4.5 kg. The box can be used outdoors. Dimensions: Φ100 x 43.2 x 129 mm.
The DS-1280ZJ-S (black) installation box has been designed for HIKVISION IP and HD-TVI cameras. The box made of metal holds the camera and protects cable connections, transformers etc. It can be installed indoors or outdoors. With the weight of 0.5 kg, the box can carry equipment with total weight ...
The M5732 installation box is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
The M5734 installation box is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
• Designed for protection of electronic devices and cable connectors
• Dimensions: 190x140x70 mm
• IP rating: IP56
• Cover fixing with steel screws
• Dedicated chassis available
• Dimensions: 190x140x70 mm
• IP rating: IP56
• Cover fixing with steel screws
• Dedicated chassis available
The M5736 installation box (240x190x90 mm) is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
• Dedicated for low-voltage installations
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x90 mm
• Optional accessories: chassis, cable fittings/glands
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x90 mm
• Optional accessories: chassis, cable fittings/glands
The M5738 installation box is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
• Dedicated for low-voltage installations
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x125 mm
• Optional accessories: chassis, cable fittings/glands
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x125 mm
• Optional accessories: chassis, cable fittings/glands
The M5742 installation box is made of aluminum and has very high IP66 rating. It is possible due to the seal made of EPDM rubber and placed in the cover.
• Weatherproof installation box made of aluminum
• Dimensions: 140x115x60 mm
• IP66 rating
• Seal made of EPDM rubber
• Dedicated accessories available
• Dimensions: 140x115x60 mm
• IP66 rating
• Seal made of EPDM rubber
• Dedicated accessories available
The DS-D5022F2-1V2S is a Hikvision-branded monitor designed for use in 24/7 continuous CCTV monitoring systems.
• Screen type: VA with E-LED backlight
• Resolution: Full HD (1920 x 1080)
• Low blue light technology
• Screen diagonal: 21.45"
• Response time: 8 ms
• Contrast: 4000:1
• Brightness: 250 cd/m²
• Viewing angles (horizontal/vertical): 178°/178°
• Inputs: 1 x HDMI, 1 x VGA
• Audio input
• Built-in 2 speakers (4 W)
• Very sleek housing including frame
• Mounting: stand or VESA standard (75 x 75 mm)
• Resolution: Full HD (1920 x 1080)
• Low blue light technology
• Screen diagonal: 21.45"
• Response time: 8 ms
• Contrast: 4000:1
• Brightness: 250 cd/m²
• Viewing angles (horizontal/vertical): 178°/178°
• Inputs: 1 x HDMI, 1 x VGA
• Audio input
• Built-in 2 speakers (4 W)
• Very sleek housing including frame
• Mounting: stand or VESA standard (75 x 75 mm)
The DS-D5024F2-BV2S is a Hikvision-branded monitor designed for use in 24/7 continuous CCTV monitoring systems.
• Screen type: VA with E-LED backlight
• Resolution: Full HD (1920 x 1080)
• Low blue light technology
• Screen diagonal: 23.8"
• Response time: 7 ms
• Contrast: 4000:1
• Brightness: 250 cd/m²
• Viewing angles (horizontal/vertical): 178°/178°
• Inputs: 1 x HDMI, 1 x VGA
• Audio input
• Built in speaker
• Very sleek housing including frame
• Mounting: stand or VESA standard (75 x 75 mm)
• Resolution: Full HD (1920 x 1080)
• Low blue light technology
• Screen diagonal: 23.8"
• Response time: 7 ms
• Contrast: 4000:1
• Brightness: 250 cd/m²
• Viewing angles (horizontal/vertical): 178°/178°
• Inputs: 1 x HDMI, 1 x VGA
• Audio input
• Built in speaker
• Very sleek housing including frame
• Mounting: stand or VESA standard (75 x 75 mm)
Universal monitor suitable for use 12/ 7 in surveillance systems. IPS screen with 1920 × 1080 resolution with E-LED backlight.
• Monitor for 24/7 operation
• Wide viewing angle vertically and horizontally
• Elegant design - frameless housing
• Wide viewing angle vertically and horizontally
• Elegant design - frameless housing
The Hikvision DS-D5043UC monitor is designed for 24/7 operation in CCTV surveillance systems.
• Screen diagonal: 42.5"
• D-LED backlight technology with 4k (3840 × 2160) resolution.
• Viewing angles: horizontal: 178°
• Working time: 24/7
• Response time: 8 ms
• Interfaces: 2 × HDMI 2.0, 1 × VGA, 1 × LAN, 1 × RS232, 1 × audio input, 1 × audio output, 1 × USB3.0, 1 × USB 2.0
• Built in speaker: 2 × 8 W
• Selectable signal source
• Contrast: 1200:1
• Brightness: 400 cd/m²
• Mounting on the wall in VESA 200 or VESA 400 standard
• D-LED backlight technology with 4k (3840 × 2160) resolution.
• Viewing angles: horizontal: 178°
• Working time: 24/7
• Response time: 8 ms
• Interfaces: 2 × HDMI 2.0, 1 × VGA, 1 × LAN, 1 × RS232, 1 × audio input, 1 × audio output, 1 × USB3.0, 1 × USB 2.0
• Built in speaker: 2 × 8 W
• Selectable signal source
• Contrast: 1200:1
• Brightness: 400 cd/m²
• Mounting on the wall in VESA 200 or VESA 400 standard
Universal tool to facilitate the implementation, configuration and maintenance of CCTV systems and computer networks.
• Scratch-resistant 7" IPS touchscreen display with high brightness for operation even in sunlight
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A
The FORSCHER FS8114 device is used to test cabling continuity, measure cable lengths and distances to faults. It can detect connection faults in UTP/STP network cables, telephone and coaxial cables. In addition, the FS8114 tester is equipped with an advanced locator of wire pairs. The operation is b...
• Cable types tested: UTP/STP cat. 5, 5e, 6, 7, telephone, coaxial
• Cable length measurement
• Measurement frequency: 130 kHz
• Measurement method: capacitive
• Maximum length: 2000 m
• Minimum length: 1 m
• "Find port" – quick search of the port in a network device
• Searching and testing cables in PoE mode (passive PoE)
• Pair integrity test
• Measuring voltages on individual conductors (POE)
• Transmitter voltage protection: 60 VAC / 48 VDC
• Auto-OFF function
• Battery discharge indicator
• Record of measurement results in the device memory
• Built-in visual fault locator (VFL) for optical cables
• Power: 9 V battery (included)
• Cable length measurement
• Measurement frequency: 130 kHz
• Measurement method: capacitive
• Maximum length: 2000 m
• Minimum length: 1 m
• "Find port" – quick search of the port in a network device
• Searching and testing cables in PoE mode (passive PoE)
• Pair integrity test
• Measuring voltages on individual conductors (POE)
• Transmitter voltage protection: 60 VAC / 48 VDC
• Auto-OFF function
• Battery discharge indicator
• Record of measurement results in the device memory
• Built-in visual fault locator (VFL) for optical cables
• Power: 9 V battery (included)
The FS8117 cable tester allows to test UTP/STP cables: cable quality, attenuation, length, distance to failure, short-circuit, improperly crimped connectors, Ping test, correct connection to the router, PoE voltage test, scan of active IPs in the network. Precision inductive probe – high power pair ...
• Cable types tested: Twisted Pair Cat. 5, 5e, 6, 7 (UTP/STP), telephone, coaxial
• Cable length testing
• ”Find port” function for quick search of ports in network devices
• Finding and testing cables in PoE mode (passive PoE)
• Pair integrity test
• PoE conductor voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Storage of measurement results in device memory
• PING test
• IP Scan
• Quick identification of connected network port
• Cable length testing
• ”Find port” function for quick search of ports in network devices
• Finding and testing cables in PoE mode (passive PoE)
• Pair integrity test
• PoE conductor voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Storage of measurement results in device memory
• PING test
• IP Scan
• Quick identification of connected network port
Terminators enable detection and testing of 8 wires (ID2-ID9). They work with FORSCHER FS8117 N7051 meter.
• Number of terminators: 8
• Cable types tested: Twisted Pair Cat. 5, 5e, 6, 7 (UTP/STP)
• Identification of specific twisted pair cable
• Cable types tested: Twisted Pair Cat. 5, 5e, 6, 7 (UTP/STP)
• Identification of specific twisted pair cable
The tester helps installers to build LAN or telephone systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The set consists of two parts - the master and remote part (terminator) - that are used at the opposite ends of the tested cable....
• Tests of LAN/phone cables continuity
• Suitable for UTP, FTP and phone cables
• RJ45 and RJ11 connectors
• Automatic or manual mode
• Suitable for UTP, FTP and phone cables
• RJ45 and RJ11 connectors
• Automatic or manual mode
PURPLE hard drives are designed for use in CCTV systems operating in 24/7 mode. The series offers superior performance, high capacity and long-term reliability. The drives can work non-stop in systems processing and recording audio and video, especially professional CCTV systems, on any platform (NA...
SkyHawk™ HDDs are designed for use in CCTV systems operating in 24/7 mode. The drives, with capacity up to 10 TB, can work non-stop in systems processing and recording audio and video, especially in NVRs and NAS systems. The SkyHawk hard drives with optimized ImagePerfect™ firmware minimize the risk...
The Western Digital hard drives from PURPLE series have been purpose-built for surveillance video systems operating in 24/7 mode.
• Capacity: 2 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
SkyHawk™ HDDs are designed for use in CCTV systems operating in 24/7 mode. The drives, with capacity up to 10 TB, can work non-stop in systems processing and recording audio and video, especially in NVRs and NAS systems. The SkyHawk hard drives with optimized ImagePerfect™ firmware minimize the risk...
PURPLE hard drives are designed for use in CCTV systems operating in 24/7 mode.
• Capacity: 4 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
SkyHawk™ HDDs are designed for use in CCTV systems operating in 24/7 mode. The drives, with capacity up to 10 TB, can work non-stop in systems processing and recording audio and video, especially in NVRs and NAS systems. The SkyHawk hard drives with optimized ImagePerfect™ firmware minimize the risk...
• Capacity: 4 TB
• Yearly workload limit: 180 TB
• 3-year limited warranty
• Solid construction suitable for operation in multi-disk arrays
• Yearly workload limit: 180 TB
• 3-year limited warranty
• Solid construction suitable for operation in multi-disk arrays
PURPLE hard drives are designed for use in CCTV systems operating in 24/7 mode. The series offers superior performance, high capacity and long-term reliability. The drives can work non-stop in systems processing and recording audio and video, especially professional CCTV systems, on any platform (NA...
SkyHawk™ HDDs are designed for use in CCTV systems operating in 24/7 mode. The drives, with capacity up to 10 TB, can work non-stop in systems processing and recording audio and video, especially in NVRs and NAS systems. The SkyHawk hard drives with optimized ImagePerfect™ firmware minimize the risk...
• Capacity: 6 TB
• Yearly workload limit: 180 TB
• 3-year limited warranty
• Solid construction suitable for operation in multi-disk arrays
• Yearly workload limit: 180 TB
• 3-year limited warranty
• Solid construction suitable for operation in multi-disk arrays
PURPLE hard drives are designed for use in video surveillance systems operating in 24/7 mode. The series offers superior performance, high capacity and long-term reliability. The drives can work non-stop in systems processing and recording audio and video, especially in professional CCTV systems, on...
SkyHawk™ HDDs are designed for use in CCTV systems operating in 24/7 mode. The drives, with capacity up to 10 TB, can work non-stop in systems processing and recording audio and video, especially in NVRs and NAS systems. The SkyHawk hard drives with optimized ImagePerfect™ firmware minimize the risk...
• Capacity: 8 TB
• Yearly workload limit: 180 TB
• 3-year limited warranty
• Solid construction suitable for operation in multi-disk arrays
• Yearly workload limit: 180 TB
• 3-year limited warranty
• Solid construction suitable for operation in multi-disk arrays
SkyHawk™ drives are built for surveillance systems. Optimised for network recorders, they are designed for 24/7 operation.
• Capacity: 10 TB
• Interface: SATA III
• dedicated for CCTV applications
• Interface: SATA III
• dedicated for CCTV applications
Drive designed for monitoring systems. Optimised for network recorders, suitable for 24/7 operation.
• Capacity: 16 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
PURPLE hard drives are designed for use in video surveillance systems operating in 24/7 mode.
• Capacity: 10 TB
• Interface: SATA III
• dedicated for CCTV applications
• Interface: SATA III
• dedicated for CCTV applications
PURPLE hard drives are designed for use in video surveillance systems operating in 24/7 mode.
• Capacity: 12 TB
• Interface: SATA III
• Dedicated for CCTV applications
• Interface: SATA III
• Dedicated for CCTV applications
GOODRAM memory cards are based on highest quality components - NAND flash memory chips coming from globally renowned manufacturers. Through the combination of components from reliable suppliers, modern production lines and extensive quality tests, the customer receives a high quality product at a re...
Dahua memory cards are manufactured using the highest quality NAND FLASH components.
• Capacity: 64 GB
• Class10 U3
• Class10 U3
GOODRAM memory cards are based on highest quality components - NAND flash memory chips coming from globally renowned manufacturers. Through the combination of components from reliable suppliers, modern production lines and extensive quality tests, the customer receives a high quality product at a re...
Dahua memory cards are manufactured using the highest quality NAND FLASH components.
• Capacity: 128 GB
• Class10 U3
• Class10 U3
GOODRAM memory cards are manufactured with the highest quality NAND FLASH components.
• Capacity: 256 GB
• Class 10
• SD adapter
• Class 10
• SD adapter
Coaxial patch cable with molded BNC connectors.
• For connection in CCTV systems
• Length: 0.5 m
• Inner conductor and screening made of copper
• Inner conductor diameter: 0.5 mm
• Length: 0.5 m
• Inner conductor and screening made of copper
• Inner conductor diameter: 0.5 mm
Cable length: 0.8 m. This patch cable is recommended for applications in CCTV systems e.g. for connection of cameras to DVRs.
• Cable for CCTV system connections
• Length 0.8 m
• Length 0.8 m
Very useful piece of equipment when installing devices with DC 2.1/5.5 power socket. The installer has to observe proper polarity (+/-). The cable is 1.5 m long.
Quick-connect plug S-55 connects a two-wire power cable to allow a standard DC connection (2.1/5.5, for CCTV cameras).
• An easy way to connect power supply to a CCTV camera
• DC plug 2.1/5.5 mm
• Screw cable terminals
• Max voltage: 24 VDC
• DC plug 2.1/5.5 mm
• Screw cable terminals
• Max voltage: 24 VDC
Quick-connect socket G-55 connects a two-wire power cable to allow a standard DC connection (2.1/5.5).
• DC 2.1/5.5 mm socket
• Screw cable terminals
• Max. voltage 24VDC
• Screw cable terminals
• Max. voltage 24VDC
The RCA-BNC adapter is used e.g. for connecting the AUDIO output of a DVR (BNC) to an audio amplifier etc. with RCA input, via a typical RCA-RCA patch cable.
This adapter is used in audio channels, e.g. to connect AUDIO output of a DVR (BNC), via a coaxial cable, to an audio amplifier with RCA input.
The F 59 MASTER E80322 male connector is manufactured exclusively for DIPOL. The features of the connector have been specially adjusted to the CAMSET (RG-59) cables.
• Dimensions suitable for CAMSET cables used e.g. in CCTV systems
• Simple and quick assembly (longitudinal compression)
• Waterproof termination of the cable and protection of a device's input (o-ring)
• Resistance to corrosion - non-ferrous metals
• Very low loss in the whole operating band
• Simple and quick assembly (longitudinal compression)
• Waterproof termination of the cable and protection of a device's input (o-ring)
• Resistance to corrosion - non-ferrous metals
• Very low loss in the whole operating band
The E8275 monolithic BNC connector is made of brass plated with nickel and is specially prepared for CAMSET/RG-59 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
• BNC Master connector for CCTV systems
• Wide operating band
• Matched to the cables of CAMSET family and RG-59 cables
• Very low loss in the whole operating band,
• Perfect matching to the transmission line within the whole operating band
• Many patented technologies
• Wide operating band
• Matched to the cables of CAMSET family and RG-59 cables
• Very low loss in the whole operating band,
• Perfect matching to the transmission line within the whole operating band
• Many patented technologies
The monolithic E8276 BNC connector is made of brass plated with nickel and is specially prepared for RG-6 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
The E8277 monolithic BNC connector is made of brass plated with nickel and is specially prepared for TRISET-113 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
The E8278 monolithic angular BNC connector is made of brass plated with nickel and is specially prepared for CAMSET/RG-59 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a lon...
• Perfectly matched to RG-59/CAMSET cables
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
The E8279 angular BNC connector is made of brass plated with nickel and is specially prepared for RG-6 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
• Perfectly matched to RG-6 cables
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
The E8284 F-female to BNC-male adapter is significantly different from the low-cost gear offered on the market. For a slightly higher price the user gets a brand product with defined characteristics. Carefully selected materials and excellent manufacturing accuracy ensure quick and reliable assembly...
BNC 75 plug crimped for RG-59.
• Connector type: BNC crimped
• Crimping tool required
• Crimping tool required
BNC 75 plug crimped suitable for the RG-6 cable.
• It allows you to terminate an RG-6 cable with a BNC plug
It requires the use of a crimping tool
It requires the use of a crimping tool
The BNC socket – BNC socket adapter allows you to connect two BNC plugs.
• It allows you to connect two BNC plugs
Keystone Simplex SC Adapter (SX) holds single SC simplex adapter in a patch panel or socket dedicated for keystone modules.
• Dedicated for SC connectors
AXON PoE Multi NetProtector is designed for surge protection of devices connected to Ethernet 10/100 Mb/s networks, such as network interface cards, hubs, switches, routers etc.
• Protection of LAN segment, including PoE solutions
• Protection of IP CCTV equipment
• Protection for all four paths (pairs)
• Threshold voltages adjusted to the function of a pair (data transmission or PoE)
• For 10/100 Mbps Ethernet networks
• Protection of IP CCTV equipment
• Protection for all four paths (pairs)
• Threshold voltages adjusted to the function of a pair (data transmission or PoE)
• For 10/100 Mbps Ethernet networks
AXON PRO Video IP Protector is four-channel surge protector of IP CCTV systems using Ethernet 10/100/1000 Mbps networks and PoE+ technology of remote power supply. The PoE+ technology allows for supplying power to devices with higher energy consumption, such as HD cameras.
• Socket type: RJ45
• Number of paths: 4
• Protected cable wires: 1,2,3,4,5,6,7,8
• Dimensions: 167x50x32 mm
• Pass-through for PoE supply
• Number of paths: 4
• Protected cable wires: 1,2,3,4,5,6,7,8
• Dimensions: 167x50x32 mm
• Pass-through for PoE supply
The 1VP-B balun (passive transformer) is designed to transmit a video signal from an unbalanced (75 ohm) video output to an unbalanced (75 ohm) video input, via a twisted pair of UTP, FTP, or STP cable, using one device on each end of the transmission line.
• Transmission of video signal via a twisted-pair cable
• PAL (CVBS): max transmission distance of 400 m,
• HD-TVI, AHD:max transmission distance of 200 m (720p) or 150 m (1080p),
• HD-CVI: max transmission distance of 200 m.
• PAL (CVBS): max transmission distance of 400 m,
• HD-TVI, AHD:max transmission distance of 200 m (720p) or 150 m (1080p),
• HD-CVI: max transmission distance of 200 m.
The 1VP-A balun (passive transformer) is designed to transmit video signal from an unbalanced (75 ohm) output to an unbalanced (75 ohm) video input, via a twisted pair of UTP, FTP, or STP cable...
The Etrix 1VP-D transformer has a BNC connector attached with a flexible cable, which ensures free positioning of the BNC end. The UTP cable is connected to a crimp connector.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP terminal connector
• BNC 75 connector placed on cable
• UTP terminal connector
The Etrix 1VP-C transformer has a BNC connector attached with a flexible cable, which ensures free positioning of the BNC end.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP screw-connector
• BNC 75 connector placed on cable
• UTP screw-connector
The ETRIX 1VAP transformer has a connector with a flexible cable BNC plug and a 2.1/5.5 socket and plug.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP RJ-45-connector
• BNC 75 connector placed on cable
• UTP RJ-45-connector
The USB extension adapter is used to connect peripheral devices to a computer or other host device with Universal Serial Bus interface with the help of a Cat5/Cat5E/Cat6 patch cable (not included). The kit consists of two units, one with USB plug type A male, the second with USB plug type A female. ...
• Can be useful in many systems
• Allows remote operation of various devices with USB port
• Range up to 50 m
• Allows remote operation of various devices with USB port
• Range up to 50 m
USB extender using UTP cable is used to connect devices with an universal serial bus.
• Allows remote operation of distant devices
• Maximum range 150 m
• Maximum range 150 m
The RV-1/2P-UHD multiplexer is designed to split signals from two sources without any loss of quality of the signal.
• Signal splitting from 1 to 2 outputs
• Input splitting configuration with jumpers
• Input splitting configuration with jumpers
D-SEP/HD is a 1-channel galvanic separator for signals transmitted via 75 ohm coaxial cable.
• Isolation between different points of the system, such as cameras and DVR
• Potential difference protection
• Signals in CVBS, AHD, HD-CVI and HD-TVI up to 8 MP.
• Potential difference protection
• Signals in CVBS, AHD, HD-CVI and HD-TVI up to 8 MP.
The VHD-15 amplifier/repeater is designed to amplify high resolution AHD, HD-CVI or HD-TVI video signal transmitted over a long distance via a twisted-pair (UTP) or coaxial cable.
A single device compensates the attenuation of about 150 m UTP cable or 300-500 m coaxial cable (depending on the type ...
• Standard:AHD - 4 Mpx, HD-CVI - 1080p, HD-TVI - 5 Mpx, CVBS - PAL / NTSC
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
The ML517 power adapter allows the user to power a Hikvision DVR with 4-pin power socket from a suitable power supply unit with 2.1/5.5 plug.
• Operating voltage: 30 VDC
• Maximum current: 5.0 A
• Plug type – socket: JACK 2.1/5.5 (male)
• Plug type – plug: DIN4 (male)
• Cable length: 10 cm
• Maximum current: 5.0 A
• Plug type – socket: JACK 2.1/5.5 (male)
• Plug type – plug: DIN4 (male)
• Cable length: 10 cm
The MP-6 / D microphone is designed for creating sound channel in various applications. The device has two outputs - the balanced (differential) output allows to transmit sound over longer distances via twisted pair cable, whereas unbalanced audio output can be used with coaxial cable, over shorter ...
A3 PVC warning board
• A3 size
• Material: PVC
• Material: PVC
A set of three stickers (300x100 mm and two 150 x 50 mm).
A set of three stickers (300x100 mm and two 150x50 mm) to be put under glass panes.
The device lessens the risk of damage caused by surges in power lines to TV, stereo, computer or other electronic equipment.
ACAR S8 FA RACK is designed for supplying power safely to up to eight devices mounted in a 19" rack cabinet. It provides protection against surges occurring in 230 VAC power line and has 8 outlets with grounding. The power strip is equipped with illuminated switch and automatic circuit breaker. The ...
• Number of sockets: 8
• Dimensions: 445x54x55 mm
• Maximum total output current: 10 A
• Dimensions: 445x54x55 mm
• Maximum total output current: 10 A
Acar 504 WF RACK is designed for supplying power safely to up to five devices mounted in a 19" rack cabinet. The device from Acar 504 series has 5 outlets with grounding that, thanks to application of quick varistors, ensure protection against surges occurring in 230 VAC power line. The power strip ...
• Five AC power outlets with grounding contact
• Power ON indicator (illuminated switch)
• Two fast fuses
• Quick varistors
• Efficient RFI filter
• Inflammable housing (self-extinguishing plastics)
• Ergonomic layout
• Hardware for mounting in a 19" rack cabinet
• Power ON indicator (illuminated switch)
• Two fast fuses
• Quick varistors
• Efficient RFI filter
• Inflammable housing (self-extinguishing plastics)
• Ergonomic layout
• Hardware for mounting in a 19" rack cabinet
DS-KV8113-WME1(C)/Surface is a 1-subscriber door/gate station dedicated for 2nd generation Hikvision IP video intercom systems.
• 1-subscriber door/gate station
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (124° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 1 button and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression,
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave door/gate stations can be added in the basic mode
• Possibility to create calling schedules
• Operated via iVMS-4200, web browsers, Hik-Connect
• Possibility to add directly to the Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (124° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 1 button and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression,
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave door/gate stations can be added in the basic mode
• Possibility to create calling schedules
• Operated via iVMS-4200, web browsers, Hik-Connect
• Possibility to add directly to the Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
DS-KV8413-WME1(C)/Surface is a 4-subscriber door/gate station dedicated for 2nd generation Hikvision IP video intercom systems.
• 4-subscriber door/gate station
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (124° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 4 buttons and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression,
• 4 alarm inputs
• Motion detection
• Surface mounted
• Remote control with Hik-Connect software (video intercom monitor required)
• Operated via iVMS-4200 and web browser
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (124° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 4 buttons and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression,
• 4 alarm inputs
• Motion detection
• Surface mounted
• Remote control with Hik-Connect software (video intercom monitor required)
• Operated via iVMS-4200 and web browser
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
DS-KD8003Y-IME2 is a Hikvision door station main module, part of the 2-Wire HD system (EY series).
• Compatible with EY series
• Possibility to install 0, 1 or 2 call buttons in main module
• Maximum expansion up to 8 modules
• Fisheye color camera: 2 MP (133° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 control outputs (1 x pulse 20 V/4 A, 1 x relay NO/NC 30 V/DC)
• 2 alarm inputs (exit button or reed switch)
• Image functions: WRD
• Support for up to 2000 users, 99 monitors, 16 slave stations
• Compatible with DS-KD-xxx series modules and DS-KD-ACFx and DS-KD-ACWx enclosures
• Power and communication via 2-Wire bus
• Capable of 12 VDC power
• Wifi interface (AP mode configuration only)
• Plug & Play connection (configuration on switches)
• Protection rating: IP65, IK08
• Possibility to install 0, 1 or 2 call buttons in main module
• Maximum expansion up to 8 modules
• Fisheye color camera: 2 MP (133° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 control outputs (1 x pulse 20 V/4 A, 1 x relay NO/NC 30 V/DC)
• 2 alarm inputs (exit button or reed switch)
• Image functions: WRD
• Support for up to 2000 users, 99 monitors, 16 slave stations
• Compatible with DS-KD-xxx series modules and DS-KD-ACFx and DS-KD-ACWx enclosures
• Power and communication via 2-Wire bus
• Capable of 12 VDC power
• Wifi interface (AP mode configuration only)
• Plug & Play connection (configuration on switches)
• Protection rating: IP65, IK08
DS-KH8350-WTE1 is a modern touch monitor dedicated for Hikvision IP video intercoms systems second generation. The monitor allows direct audio/video conversation with people at the door station and intercom communication between other monitors (indoor stations) installed in the system. This way, the...
The DS-KH8380-WTE1 is an advanced monitor designed to support second-generation Hikvision IP video door entry systems.
• 7" TFT LCD colour touch screen with a resolution of 1024 x 600 px
• Operation via graphical user interface UI v2.0
• Built-in speakers and microphone
• Viewing of images from door stations and IP cameras
• Supported compression: H.265, H.264
• Clear sound thanks to echo and noise suppression
• Management via iVMS-4200
• Access and remote opening with iVMS-4200, Hik-Connect software.
• Additional functions: intercom, recording of pictures and voice messages
• Recording of photos while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 4 relay outputs (max. 30 V/DC, 1 A)
• Power output: 12 V/DC, 0.5 A
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply: 12 V/DC or PoE (802.3af)
• Operation via graphical user interface UI v2.0
• Built-in speakers and microphone
• Viewing of images from door stations and IP cameras
• Supported compression: H.265, H.264
• Clear sound thanks to echo and noise suppression
• Management via iVMS-4200
• Access and remote opening with iVMS-4200, Hik-Connect software.
• Additional functions: intercom, recording of pictures and voice messages
• Recording of photos while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 4 relay outputs (max. 30 V/DC, 1 A)
• Power output: 12 V/DC, 0.5 A
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply: 12 V/DC or PoE (802.3af)
The DS-KH8381-WTE1 is an advanced touchscreen monitor designed to support second-generation Hikvision IP video door entry systems.
• 7" colour IPS touch screen with a resolution of 1024 x 600 px
• Operation via graphical user interface UI v2.0
• Physical button for easier door opening
• Built-in loudspeaker and microphone
• Viewing of images from door stations and IP cameras
• Supported compression: H.265, H.264
• Clear sound thanks to echo and noise suppression
• Management via iVMS-4200
• Access and remote opening with iVMS-4200, Hik-Connect software
• Additional functions: intercom, recording of pictures and voice messages
• Recording of photos while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 4 relay outputs (max. 30 V/DC, 1 A)
• Power output: 12 V/DC, 0.5 A
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply: 12 V/DC or PoE (802.3af)
• Operation via graphical user interface UI v2.0
• Physical button for easier door opening
• Built-in loudspeaker and microphone
• Viewing of images from door stations and IP cameras
• Supported compression: H.265, H.264
• Clear sound thanks to echo and noise suppression
• Management via iVMS-4200
• Access and remote opening with iVMS-4200, Hik-Connect software
• Additional functions: intercom, recording of pictures and voice messages
• Recording of photos while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 4 relay outputs (max. 30 V/DC, 1 A)
• Power output: 12 V/DC, 0.5 A
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply: 12 V/DC or PoE (802.3af)
DS-KH9310-WTE1 is a modern touch monitor with Android operating system dedicated for the Hikvision IP video intercoms systems II.
• Compatible with 2nd generation IP video intercom system
• Operating system: Android
• 7” color TFT LCD display with resolution of 1024 x 600 pixels
• Built-in speakers and microphone
• View video from door station and IP cameras
• Management with iVMS-4200
• Access and remote opening using iVMS-4200, Hik-Connect app
• Integration with other Hikvision devices via preloaded Hik-Connect application
• Possible to install 2 additional applications
• Additional functions: intercom, voice messages, saving images
• Capturing photos during the tenant absence
• Built-in memory: 4 GB Emmc
• 8 alarm inputs and 2 relay outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
• Operating system: Android
• 7” color TFT LCD display with resolution of 1024 x 600 pixels
• Built-in speakers and microphone
• View video from door station and IP cameras
• Management with iVMS-4200
• Access and remote opening using iVMS-4200, Hik-Connect app
• Integration with other Hikvision devices via preloaded Hik-Connect application
• Possible to install 2 additional applications
• Additional functions: intercom, voice messages, saving images
• Capturing photos during the tenant absence
• Built-in memory: 4 GB Emmc
• 8 alarm inputs and 2 relay outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
DS-KH9510-WTE1 is a modern touch monitor with Android operating system dedicated for the Hikvision IP video intercoms systems II.
• Compatible with 2nd generation IP video intercom system
• Operating system: Android,
• 10.1" color TFT LCD display with a resolution 1024 x 600 p,
• Operated via graphical interface UI v2.0,
• Built-in speakers and microphone,
• Viewing of video from door station and IP cameras,
• Clear sound due to echo and noise cancellation,
• Management via iVMS-4200,
• Access and remote opening via iVMS-4200, Hik-Connect software,
• Integration with other Hikvision devices via pre-installed Hik-Connect application,
• Possibility to install 2 additional applications,
• Additional features: intercom, recording of photos and voice messages,
• Capturing photos during the tenant absence,
• Built-in memory: 8 GB Emmc,
• microSD slot (for future applications, currently not supported)
• 8 alarm inputs and 2 relay outputs
• Built-in Wi-Fi module 2.4 GHz (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
• Operating system: Android,
• 10.1" color TFT LCD display with a resolution 1024 x 600 p,
• Operated via graphical interface UI v2.0,
• Built-in speakers and microphone,
• Viewing of video from door station and IP cameras,
• Clear sound due to echo and noise cancellation,
• Management via iVMS-4200,
• Access and remote opening via iVMS-4200, Hik-Connect software,
• Integration with other Hikvision devices via pre-installed Hik-Connect application,
• Possibility to install 2 additional applications,
• Additional features: intercom, recording of photos and voice messages,
• Capturing photos during the tenant absence,
• Built-in memory: 8 GB Emmc,
• microSD slot (for future applications, currently not supported)
• 8 alarm inputs and 2 relay outputs
• Built-in Wi-Fi module 2.4 GHz (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
The set provides an excellent representation of the monitored scene and allows recording images with a resolution of up to 4 MP
• 4 Sunell SN-IPR8140HCBN-B K1621 IP cameras
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
The set provides an excellent representation of the monitored scene and allows recording images with a resolution of up to 4 MP.
• 4 Sunell SN-IPR8140HCBN-B(dark) K1621B IP cameras
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
The set provides an excellent representation of the monitored scene and allows recording images with a resolution of up to 4 MP.
• 4 Sunell SN-IPR8140BYBN-B K1654 IP cameras
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
The set provides an excellent representation of the monitored scene and allows recording images with a resolution of up to 4 MP.
• 4 Sunell SN-IPR8140BYBN-B K1654B(dark) IP cameras
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
