EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Video surveillance is one of the basic forms of protecting property. Nowadays, however, new generations of cameras and recorders allow the use of CCTV systems also in other situations. Appropriate cameras and software with image analysis functions connected to other systems allow the automation of several processes and, thanks to artificial intelligence, the identification of people and vehicles.
The CCTV cameras include IP cameras and analog CVI cameras, TVI and AHD cameras, among others. The IP cameras typically operate in an IP network and are connected via switches to the NVRs. The transmission medium here is typically a twisted-pair cable. Analog cameras are usually connected directly to the DVR via coaxial cables or, when using transformers, via twisted-pair.
In addition to cameras and DVRs, the range of products offered by our CCTV range includes all components that make up a CCTV system, such as: coaxial cables and twisted-pair cables, disks, monitors, transformers and power supplies.
The CCTV cameras include IP cameras and analog CVI cameras, TVI and AHD cameras, among others. The IP cameras typically operate in an IP network and are connected via switches to the NVRs. The transmission medium here is typically a twisted-pair cable. Analog cameras are usually connected directly to the DVR via coaxial cables or, when using transformers, via twisted-pair.
In addition to cameras and DVRs, the range of products offered by our CCTV range includes all components that make up a CCTV system, such as: coaxial cables and twisted-pair cables, disks, monitors, transformers and power supplies.
DS-2CD3143G2-ISU is an IP ceiling camera from Hikvision's Ultra(SmartIP) series.
• Sensor 1/3" Progressive Scan CMOS
• Resolution 4 MP – 2688x1520 @ 25 fps
• Fixed lens 2.8 mm (F1.6)/103°
• Uniform illumination at night with EXIR technology: SmartIR up to 40 m
• Video compression H.265+/H.265/H.264+/H.264/MJPEG
• AcuSense technology (false alarm filter, object classification: human, vehicle)
• Intelligent image analysis VCA based on object classification detection
• Support for microSD cards up to 512 GB
• Three streams supported
• Image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
• Regions of interest ROI: 5
• ANR function
• Applications: HikCentral, iVMS-4200, Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Support for: ONVIF, ONVIF, SDK, ISUP
• Built-in microphone
• Audio in/out: 1/1
• Alarm in/out: 1/1
• Protection degree: IP67, IK10
• 12 VDC or PoE (802.3af) power supply
• Resolution 4 MP – 2688x1520 @ 25 fps
• Fixed lens 2.8 mm (F1.6)/103°
• Uniform illumination at night with EXIR technology: SmartIR up to 40 m
• Video compression H.265+/H.265/H.264+/H.264/MJPEG
• AcuSense technology (false alarm filter, object classification: human, vehicle)
• Intelligent image analysis VCA based on object classification detection
• Support for microSD cards up to 512 GB
• Three streams supported
• Image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
• Regions of interest ROI: 5
• ANR function
• Applications: HikCentral, iVMS-4200, Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Support for: ONVIF, ONVIF, SDK, ISUP
• Built-in microphone
• Audio in/out: 1/1
• Alarm in/out: 1/1
• Protection degree: IP67, IK10
• 12 VDC or PoE (802.3af) power supply
The Hikvision DS-2CD6825G0/C-IS is an IP camera with intelligent image analysis designed to control the flow of people in real time.
• Image resolution 2 MP
• High counting accuracy
• Two 2 mm fixed lenses
• Built-in IR LEDs with up to 6 m range
• Two independent video streams
• Audio interface: 1 input/1 output, built-in microphone
• Alarm interface: 1 input/1 output
• 12 VDC, PoE (802.3af), 8 W power supply
• Manually or automatically generated of daily, monthly and yearly statistics
• Possible integration with external software via ISAPI (e.g. to access the statistics)
• High counting accuracy
• Two 2 mm fixed lenses
• Built-in IR LEDs with up to 6 m range
• Two independent video streams
• Audio interface: 1 input/1 output, built-in microphone
• Alarm interface: 1 input/1 output
• 12 VDC, PoE (802.3af), 8 W power supply
• Manually or automatically generated of daily, monthly and yearly statistics
• Possible integration with external software via ISAPI (e.g. to access the statistics)
Tubular IP Camera: Hikvision DS-2CD3043G2-IU (4 MP, 12 mm, 0.005 lx, IR up to 40 m, Audio, AcuSense)
DS-2CD3043G2-IU is an IP dome camera from Hikvision's Ultra(SmartIP) series.
• Sensor 1/3" Progressive Scan CMOS
• Resolution 4 MP – 2688x1520 @ 25 fps
• Fixed lens 2.8 mm (F1.6)/103°
• Uniform illumination at night with EXIR technology: SmartIR up to 40 m
• Video compression H.265+/H.265/H.264+/H.264/MJPEG
• AcuSense technology (false alarm filter, object classification: human, vehicle)
• Intelligent image analysis VCA based on object classification detection
• Support for microSD cards up to 512 GB
• Three streams supported
• Image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
• Regions of interest ROI: 5
• ANR function
• Applications: HikCentral, iVMS-4200, Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Support for: ONVIF, ISAPI, SDK, ISUP
• Built-in microphone
• Protection rating: IP67
• 12 VDC or PoE (802.3af) power supply
• Resolution 4 MP – 2688x1520 @ 25 fps
• Fixed lens 2.8 mm (F1.6)/103°
• Uniform illumination at night with EXIR technology: SmartIR up to 40 m
• Video compression H.265+/H.265/H.264+/H.264/MJPEG
• AcuSense technology (false alarm filter, object classification: human, vehicle)
• Intelligent image analysis VCA based on object classification detection
• Support for microSD cards up to 512 GB
• Three streams supported
• Image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
• Regions of interest ROI: 5
• ANR function
• Applications: HikCentral, iVMS-4200, Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Support for: ONVIF, ISAPI, SDK, ISUP
• Built-in microphone
• Protection rating: IP67
• 12 VDC or PoE (802.3af) power supply
4 MP camera with fixed-focus, wide-angle lens in a robust metal housing. Built-in microphone.
• 4 MP (2K) resolution
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• Built-in microphone and SD card slot
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• Built-in microphone and SD card slot
4 MP camera with fixed-focus, wide-angle lens in a robust metal housing. Built-in microphone.
• 4 MP (2K) resolution
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• Built-in microphone and SD card slot
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• Built-in microphone and SD card slot
4 MP camera with a motozoom lens in a robust metal housing. Built-in microphone.
• 4 MP (2K) resolution
• Three video streams
• Motozoom lens (2.7-13.5 mm)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 40 m
• Built-in microphone and SD card slot
• Three video streams
• Motozoom lens (2.7-13.5 mm)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 40 m
• Built-in microphone and SD card slot
4 MP camera with fixed-focus, wide-angle lens in a robust metal housing.
• 4 MP (2K) resolution
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• SD card slot
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• SD card slot
Bullet IP Camera: Sunell SN-IPR8140BYBN-B (dark) (4 MP, 2.8 mm, 0.03 lx IR up to 30 m, H.264, black)
4 MP camera with fixed-focus, wide-angle lens in a robust metal housing.
• 4 MP (2K) resolution
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• SD card slot
• Three video streams
• Wide angle of view (2.8 mm lens)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 30 m
• SD card slot
4 MP camera with a motozoom lens in a robust metal housing.
• 4 MP (2K) resolution
• Three video streams
• Motozoom lens (2.7-13.5 mm)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 40 m
• SD card slot
• Three video streams
• Motozoom lens (2.7-13.5 mm)
• Intelligent motion detection (human and vehicle detection)
• Intelligent image analysis: trespassing, crossing a line, crossing two lines, loitering, driving against traffic, face detection, human silhouette detection, vehicle detection
• Infrared illuminator with a range of up to 40 m
• SD card slot
Quad-system (HD-TVI, HD-CVI, AHD, CVBS) dome camera with 2 Mpix resolution and built-in microphone. Hybrid illuminator.
• Camera resolution of 2 Mpix (1920 x 1080p) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity: 0.01 lux
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 20 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Internal
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity: 0.01 lux
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 20 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Internal
Multi-system dome camera (HD-TVI, HD-CVI, AHD, CVBS), 2 MP resolution with built-in microphone. Hybrid illuminator.
• 2 MP resolution (1920 x 1080p) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• Hybrid illuminator with smart switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• Hybrid illuminator with smart switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
Quad-system dome camera (HD-TVI, HD-CVI, AHD, CVBS) with 2 Mpix resolution from the ColorVu series with built-in microphone. Hybrid illuminator.
• Camera resolution of 2 Mpix (1920 x 1080p) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity: 0.0005 lux, ColorVu technology
• Lens: 2.8 mm F1.0
• WDR 130 dB, 3D DNR
• Hybrid illuminator with intelligent switching (IR up to 20 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Tight (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity: 0.0005 lux, ColorVu technology
• Lens: 2.8 mm F1.0
• WDR 130 dB, 3D DNR
• Hybrid illuminator with intelligent switching (IR up to 20 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Tight (IP67 rated) housing
Quad-system dome camera (HD-TVI, HD-CVI, AHD, CVBS) with 2 Mpix resolution from the ColorVu series with built-in microphone. Hybrid illuminator.
• Camera resolution of 2 Mpix (1920 x 1080p) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity: 0.0005 lux, ColorVu technology
• Lens: 2.8 mm F1.0
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Tight (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity: 0.0005 lux, ColorVu technology
• Lens: 2.8 mm F1.0
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Tight (IP67 rated) housing
Multi-system dome camera (HD-TVI, HD-CVI, AHD, CVBS), 5 MP (3K) resolution with built-in microphone. Hybrid illuminator.
• 5 MP resolution (1960 x 1665, 3K, 16:9 aspect ratio) at 20 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• Hybrid illuminator with smart switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• Hybrid illuminator with smart switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
Multi-system dome camera (HD-TVI, HD-CVI, AHD, CVBS), 5 MP resolution with built-in microphone. Hybrid illuminator.
• 5 MP resolution (1960 x 1665, 3K, 16:9 aspect ratio) at 20 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• Hybrid illuminator with smart switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• Hybrid illuminator with smart switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) indoor 5 MP dome camera with a built-in microphone. Hybrid illuminator.
• Camera resolution of 5 MP (1960 × 1665, 3K, 16:9) at 20 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 20m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 20m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
A four-system (HD-TVI, HD-CVI, AHD, CVBS) dome amera with 8 MP (4K) resolution. Hybrid illuminator.
• Camera resolution of 8 MP (4K) (3840 × 2160) at 12.5 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4-system (HD-TVI, HD-CVI, AHD, CVBS) 5 MP dome camera with high sensitivity. Hybrid illuminator. PoC function.
• Camera resolution of 5 MP (1960 × 1665, 3K, 16:9) at 20 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.0005 lx, ColorVu technology
• Lens: 2.8 mm F1.0
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.0005 lx, ColorVu technology
• Lens: 2.8 mm F1.0
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 2 MP tubular camera with a built-in microphone. Hybrid illuminator. Plastic housing.
• Camera resolution of 2 MP (1920 × 1080) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 25 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 25 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 2 MP tubular camera with a built-in microphone. Hybrid illuminator.
• Camera resolution of 2 MP (1920 × 1080) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 2 MP tubular camera with a built-in microphone. Powerfull hybrid illuminator.
• Camera resolution of 2 MP (1920 × 1080) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 5 MP tubular camera (3K) with a built-in microphone. Hybrid illuminator. Plastic housing.
• Camera resolution of 5 MP (1960 × 1665, 3K, 16:9) at 20 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 25 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 25 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 5 MP tubular camera (3K) with a built-in microphone. Hybrid illuminator
• Camera resolution of 5 MP (1960 × 1665, 3K, 16:9) at 20 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 5 MP tubular camera with a built-in microphone. Powerfull hybrid illuminator.
• Camera resolution of 5 MP (1960 × 1665, 3K, 16:9) at 20 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone to transmit audio and video over common cable
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Multi-system dome camera (HD-TVI, HD-CVI, AHD, CVBS), 2 MP resolution with built-in microphone. Hybrid illuminator.
• 2 MP resolution (1920 x 1080p) at 25 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.0005 lx, ColorVu technology
• 2.8 mm lens, F1.0
• Hybrid illuminator with smart switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standards
• Sensitivity 0.0005 lx, ColorVu technology
• 2.8 mm lens, F1.0
• Hybrid illuminator with smart switching (IR up to 40 m, white light up to 40 m)
• Built-in microphone - audio and video transmission via common cable
• Mechanical infrared filter (ICR)
• Sealed (IP67 rated) housing
5 Mpix (3K) horn camera with ColorVu technology and PoC function. Hybrid illuminator.
• 5 Mpix resolution (1960 x 1665, 3K, 16:9 aspect ratio) at 20 fps.
• Output signal in HD-TVI standard
• Sensitivity: 0.0005 lux, ColorVu technology
• Lens: 2.8 mm F1.0
• Hybrid illuminator with intelligent switching (IR up to 20 m, white light up to 20 m)
• Mechanical infrared filter (ICR)
• Tight (IP67 rated) housing
• Output signal in HD-TVI standard
• Sensitivity: 0.0005 lux, ColorVu technology
• Lens: 2.8 mm F1.0
• Hybrid illuminator with intelligent switching (IR up to 20 m, white light up to 20 m)
• Mechanical infrared filter (ICR)
• Tight (IP67 rated) housing
A four-system (HD-TVI, HD-CVI, AHD, CVBS) tube amera with 8 MP (4K) resolution. Hybrid illuminator.
• Camera resolution of 8 MP (4K) (3840 × 2160) at 12.5 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Mechanical IR filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS
• Sensitivity: 0.01 lx
• Lens: 2.8 mm
• Hybrid illuminator with intelligent switching (IR up to 30 m, white light up to 20 m)
• Mechanical IR filter (ICR)
• Sealed (IP67 rated) housing
5 Mpix (3K) horn camera with ColorVu technology and PoC function. Hybrid illuminator.
• Camera resolution of 5 MP (1960 × 1665, 3K, 16:9) at 20 fps
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.0005 lx, ColorVu technology
• Lens: 2.8 mm F1.0
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
• Output signal in HD-TVI, AHD, HD-CVI, CVBS standard
• Sensitivity: 0.0005 lx, ColorVu technology
• Lens: 2.8 mm F1.0
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Mechanical IR cut filter (ICR)
• Sealed (IP67 rated) housing
Hikvision DS-2CE76H0T-ITMF four-system dome camera (HD-TVI, HD-CVI, AHD ,CVBS) with 5 MP resolution. IR up to 30m.
• Image resolution: 5 MP (2560 x 1944) at 20 fps
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS
• Sensitivity: 0.01 lx
• 2.8 lens
• OSD menu controlled from DVR via the signal cable
• Mechanically switching IR filter (ICR)
• Weather-proof housing (IP67)
• Smart IR illuminator (EXIR 2.0) with range up to 30 m
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS
• Sensitivity: 0.01 lx
• 2.8 lens
• OSD menu controlled from DVR via the signal cable
• Mechanically switching IR filter (ICR)
• Weather-proof housing (IP67)
• Smart IR illuminator (EXIR 2.0) with range up to 30 m
Hikvision DS-2CE78H8T-IT3F four-system dome camera (HD-TVI, HD-CVI, AHD ,CVBS) with 5 MP resolution. IR up to 60 m.
• Image resolution: 5 MP (2560 x 1944) at 20 fps
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS
• Sensitivity: 0.003 lx
• 2.8 lens
• WDR: 130 dB
• OSD menu controlled from DVR via the signal cable
• Mechanically switching IR filter (ICR)
• Weather-proof housing (IP67)
• Smart IR illuminator (EXIR 2.0) with range up to 60 m
• Selectable video standard: HD-TVI, AHD, HD-CVI or CVBS
• Sensitivity: 0.003 lx
• 2.8 lens
• WDR: 130 dB
• OSD menu controlled from DVR via the signal cable
• Mechanically switching IR filter (ICR)
• Weather-proof housing (IP67)
• Smart IR illuminator (EXIR 2.0) with range up to 60 m
The Hikvision DS-2CE16D0T-IRF M75459 camera can be used in video surveillance systems based on various types of DVRs. The user can select the required video standard from among HD-TVI, HD-CVI, AHD, or the legacy CVBS (ANALOG). The choice of the standard is made by an appropriate setting of the switc...
Copy of camera M75458, only focal length changed from 3.6 to 2.8 mm
4 in 1 (HD-TVI, HD-CVI, AHD, CVBS) 2MP dome camera with a built-in microphone. IR up to 30 m.
• Camera resolution 2 MP (1920 x 1080p) at 25 fps
• Built-in microphone - transmission of audio and video over common cable
• Output signal in HD-TVI, AHD, HD-CVI or CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• OSD menu control via DVR using signal cable
• Mechanical IR cut filter
• Tight housing (IP67)
• Smart IR illuminator with range up to 30 m (EXIR 2.0)
• Built-in microphone - transmission of audio and video over common cable
• Output signal in HD-TVI, AHD, HD-CVI or CVBS standards
• Sensitivity 0.01 lx
• 2.8 mm lens
• OSD menu control via DVR using signal cable
• Mechanical IR cut filter
• Tight housing (IP67)
• Smart IR illuminator with range up to 30 m (EXIR 2.0)
Hikvision DS-7732NI-M4 is a modern 32-channel IP recorder, recording image from IP cameras with a resolution of 32 MP.
• Recording at up to 32 MP
• Supports up to 16 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 1 x VGA
• Independent HDMI 2/VGA outputs
• BNC output
• Maximum input/output data stream – 256/256 Mbps
• Supports 4 SATA III drives up to 16 TB (64 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+)
• Function support: ANR, POS (cash register integration)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 1 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via cloud P2P
• Supports up to 16 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 1 x VGA
• Independent HDMI 2/VGA outputs
• BNC output
• Maximum input/output data stream – 256/256 Mbps
• Supports 4 SATA III drives up to 16 TB (64 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+)
• Function support: ANR, POS (cash register integration)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 1 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via cloud P2P
Hikvision DS-7732NI-M4 is a modern 32-channel IP recorder, recording image from IP cameras with a resolution of 32 MP.
• Recording at up to 32 MP
• Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 1 x VGA
• Independent HDMI 2/VGA outputs
• BNC output
• Maximum input/output data stream – 320/400 Mbps
• Supports 4 SATA III drives up to 16 TB (64 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+)
• Function support: ANR, POS (cash register integration)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 1 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via cloud P2P
• Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 1 x VGA
• Independent HDMI 2/VGA outputs
• BNC output
• Maximum input/output data stream – 320/400 Mbps
• Supports 4 SATA III drives up to 16 TB (64 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+)
• Function support: ANR, POS (cash register integration)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 1 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via cloud P2P
The Hikvision DS-9632NI-I8 is a state-of-the-art 32-channel IP NVR that allows recording video from IP cameras of up to 32 MP resolution.
• Recording at up to 32 MP
• Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Maximum input / output bandwidth – 320/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per drive)
• Support for 8 SATA III drives up to 16 TB
• Disk cloning support for eSATA drive
• Support for cameras with built-in VCA analytics
• Support for cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via cloud P2P
• Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Maximum input / output bandwidth – 320/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per drive)
• Support for 8 SATA III drives up to 16 TB
• Disk cloning support for eSATA drive
• Support for cameras with built-in VCA analytics
• Support for cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via cloud P2P
Hikvision DS-9664NI-M8 is a modern 64-channel IP recorder, recording image from IP cameras with a resolution of 32 MP.
• Recording at up to 32 MP
• Supports up to 64 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Independent outputs HDMI1/HDMI2, VGA1/VGA2 (parallel HDMI1/VGA1 and HDMI2/VGA2)
• BNC output,
• Maximum input/output bandwidth – 400/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per disk)
• Supports 8 SATA III drives up to 16 TB (128 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for a PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via P2P cloud
• Supports up to 64 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Independent outputs HDMI1/HDMI2, VGA1/VGA2 (parallel HDMI1/VGA1 and HDMI2/VGA2)
• BNC output,
• Maximum input/output bandwidth – 400/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per disk)
• Supports 8 SATA III drives up to 16 TB (128 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for a PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via P2P cloud
Hikvision DS-9664NI-M16 is a modern 64-channel IP recorder, recording image from IP cameras with a resolution of 32 MP.
• Recording at up to 32 MP
• Supports up to 64 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Independent outputs HDMI1/HDMI2, VGA1/VGA2 (parallel HDMI1/VGA1 and HDMI2/VGA2)
• BNC output,
• Maximum input/output bandwidth – 400/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per disk)
• Supports 16 SATA III drives up to 16 TB (256 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via cloud P2P
• Supports up to 64 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Independent outputs HDMI1/HDMI2, VGA1/VGA2 (parallel HDMI1/VGA1 and HDMI2/VGA2)
• BNC output,
• Maximum input/output bandwidth – 400/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per disk)
• Supports 16 SATA III drives up to 16 TB (256 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via cloud P2P
Network recorder from the Eko series with support for AI camera functions, compact metal housing.
• Recording in resolution up to 4K (12 MP)
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 40 Mbps
• Supports up to 4 Sunell or other manufacturers' IP cameras via Onvif
• 1 slot for SATA drive up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 100 Mbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 40 Mbps
• Supports up to 4 Sunell or other manufacturers' IP cameras via Onvif
• 1 slot for SATA drive up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 100 Mbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
Network recorder from the Eko series with support for AI camera functions, compact metal housing.
• Recording in resolution up to 4K (12 MP)
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 56 Mbps
• Supports up to 4 Sunell or other manufacturers' IP cameras via Onvif
• 1 slot for SATA drive up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 100 Mbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 56 Mbps
• Supports up to 4 Sunell or other manufacturers' IP cameras via Onvif
• 1 slot for SATA drive up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 100 Mbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
Network recorder from the Eko series with support for AI camera functions, compact metal housing.
• Recording in resolution up to 4K (12 MP)
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 112 Mbps
• Supports up to16 Sunell or other manufacturers' IP cameras via Onvif
• 2 slots for SATA drives up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 1 Gbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 112 Mbps
• Supports up to16 Sunell or other manufacturers' IP cameras via Onvif
• 2 slots for SATA drives up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 1 Gbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
4-channel multi-system DVR for cameras up to 2 MP with storage on built-in eSSD.
• Supports 4 HD-TVI, HD-CVI, AHD cameras in 1080p, 720p at 15 fps or CVBS
• Motion detection 2.0 on 2 channels
• Support for 1 IP camera
• Built-in 512 GB eSSD
• Motion detection 2.0 on 2 channels
• Support for 1 IP camera
• Built-in 512 GB eSSD
8-channel Hikvision DVR for up to 8 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP). Plastic housing.
• HD-TVI signal recording with 8 MP resolution at 8 fps, 5 MP at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
• AcuSense video analytics based on Deep Learning in 4 channels
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 Mpix, Hikvision brand or others via Onvif)
• Possible to replace analog channels via IP in 1:1 ratio
• Extended IP camera support mode (Enhanced IP – excludes VCA analysis)
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• AcuSense video analytics based on Deep Learning in 4 channels
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 Mpix, Hikvision brand or others via Onvif)
• Possible to replace analog channels via IP in 1:1 ratio
• Extended IP camera support mode (Enhanced IP – excludes VCA analysis)
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
8-channel Hikvision DVR for up to 2 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP). Plastic housing.
• Supports 8 HD-TVI, AHD cameras in 1080p, 720p at 15 fps or CVBS
• Supports 2 IP cameras in standard mode, possibility to replace analog channels by IP in 1:1 ratio
• Extended IP camera support mode (Enhanced IP – interferes with VCA functions): 4 IP channels (12 when analog channels are disabled)
• H.265 and H.265+
• Supports 2 IP cameras in standard mode, possibility to replace analog channels by IP in 1:1 ratio
• Extended IP camera support mode (Enhanced IP – interferes with VCA functions): 4 IP channels (12 when analog channels are disabled)
• H.265 and H.265+
4-channel Hikvision DVR for up to 2 MP cameras with 2 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (4 channels) or perimeter protection (8 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (4 channels) or perimeter protection (8 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
8-channel Hikvision DVR for up to 2 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (4 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (4 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
8-channel Hikvision DVR for up to 2 MP cameras with 8 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
4-channel Hikvision DVR for up to 5 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording at 8 Mpix at 8 fps (1 channel only), 5 Mpix (3K) at 12 fps, 3 Mpix at 18 fps, 1080p and lower at 25 fps
• Supports HD-TVI, AHD or CVBS and IP cameras (max. 8 Mpix, Hikvision brand or other via Onvif)
• Possibility of replacing analogue channels with IP in a 1:1 ratio.
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• Implementation of AI functions: motion detection 2.0 (4 channels) or perimeter protection (4 channels) or face detection and recognition (2 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Supports HD-TVI, AHD or CVBS and IP cameras (max. 8 Mpix, Hikvision brand or other via Onvif)
• Possibility of replacing analogue channels with IP in a 1:1 ratio.
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• Implementation of AI functions: motion detection 2.0 (4 channels) or perimeter protection (4 channels) or face detection and recognition (2 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
8-channel Hikvision DVR for up to 8 MP cameras with 8 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 8 MP resolution at 8 fps, 5 MP (3K) at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
16-channel Hikvision DVR for up to 8 MP cameras with 8 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 8 MP resolution at 8 fps, 5 MP (3K) at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
Connection cable 1 m for mobile recorders terminated with a socket and M12 plug.
• Length: 1 m
• Joint: M12
• Joint: M12
A 3 m connecting cable for mobile DVRs, terminated with a M12 socket and plug.
• Length 3 m
• Connector M12
• Connector M12
A 5 m connecting cable for mobile DVRs, terminated with a M12 socket and plug.
• Length 5 m
• M12 connectors
• M12 connectors
A 10 m connecting cable for mobile DVRs, terminated with a M12 socket and plug.
• Length 10 m
• M12 connectors
• M12 connectors
Additional drive bay for a 2.5" HDD/SSD, intended for Protect DVR.
PROTECT LED KL-1 control panel is used as a monitor of the operating status of a PROTECT mobile DVR and as IR remote control extender.
• Monitoring of mobile recorder operation
• IR extender function
• 6 indicator LEDs
• 4 m cable
• IR extender function
• 6 indicator LEDs
• 4 m cable
Connection cable for connecting a camera (with BNC plug) to a mobile recorder equipped with an M12 connector. Allows the transmission of video, power and audio signals.
• M12 connector compatibility - fits mobile DVRs with M12 sockets
• Video and power transmission - allows simultaneous transmission of video, audio and power to the camera
• BNC, RCA, DC 2.1/5.5 connectors
• Video and power transmission - allows simultaneous transmission of video, audio and power to the camera
• BNC, RCA, DC 2.1/5.5 connectors
Outdoor dome camera designed for vehicle video surveillance systems. The 1080p image in AHD standard is compatible with Protect DVRs.
• Compact dimensions for aesthetically pleasing installation inside the vehicle
• AHD signal with 720p resolution
• StarLight sensor with a sensitivity of 0.01 lux
• IP68 rating
• AHD signal with 720p resolution
• StarLight sensor with a sensitivity of 0.01 lux
• IP68 rating
Mobile 4-channel DVR for HDD/SDD recording with a resolution of 1080p. 8 alarm inputs allow integration with sensors. H.265 video compression.
• Maximum recording resolution of 1080p at 25 fps
• Supports 4 channels of AHD (1080p or lower) or CVBS (960H or lower) and IP cameras (up to 1080p, 1 RJ-45 connector)
• Possibility to record to a 2.5" HDD / SSD of up to 2 TB (1 slot)
• Possible to copy recordings to SD card or memory stick (1 USB 3.0 slot on front)
• Automatic heating of the HDD slot allows recording to start at a temperature of -40°C
• Vibration and shock-absorbing design of electronics and drives in compliance with military standard MIL-STD-810G
• Wide operating temperature range -40°C to 80°C
• Built-in 3-axis G-sensor overload sensor
• Built-in 3-axis gyroscope
• GPS module with external antenna
• Power supply for 4 x AHD cameras
• Power supply back-up - the DVR continues to record after a short power failure (up to 8 s)
• Automatic recording after power connection
• Supports 4 channels of AHD (1080p or lower) or CVBS (960H or lower) and IP cameras (up to 1080p, 1 RJ-45 connector)
• Possibility to record to a 2.5" HDD / SSD of up to 2 TB (1 slot)
• Possible to copy recordings to SD card or memory stick (1 USB 3.0 slot on front)
• Automatic heating of the HDD slot allows recording to start at a temperature of -40°C
• Vibration and shock-absorbing design of electronics and drives in compliance with military standard MIL-STD-810G
• Wide operating temperature range -40°C to 80°C
• Built-in 3-axis G-sensor overload sensor
• Built-in 3-axis gyroscope
• GPS module with external antenna
• Power supply for 4 x AHD cameras
• Power supply back-up - the DVR continues to record after a short power failure (up to 8 s)
• Automatic recording after power connection
Mobile 4-channel DVR for HDD/SDD recording with a resolution of 1080p. 8 alarm inputs allow integration with sensors. H.265 compression, WiFi module.
• Maximum recording resolution of 1080p at 25 fps
• Supports 4 channels AHD (1080p or lower) or CVBS (960H or lower) and an IP camera (up to 1080p, 1 RJ-45 connector)
• Recording to 2.5" HDD/SSD with up to 2 TB capacity (1 slot)
• Possibility to copy recordings to an SD card or a flash drive (1 USB 3.0 slot in the front)
• Built-in dual-band WiFi module (2.4 and 5 GHz) for automatic data synchronization
• Automatic HDD slot heating to start recording at temperatures from -40°C
• Vibration and shock absorbing design of electronics and drives according to military standard MIL-STD- 810G
• Wide operating temperature range -40°C to 80°C
• Built-in 3-axis G overload sensor
• Built-in 3-axis gyroscope
• GPS module with an external antenna
• Power supply for 4 x AHD cameras
• Power supply backup – the DVR continues to record after a short power failure (up to 8 s)
• Automatic recording after power supply is connected
• Supports 4 channels AHD (1080p or lower) or CVBS (960H or lower) and an IP camera (up to 1080p, 1 RJ-45 connector)
• Recording to 2.5" HDD/SSD with up to 2 TB capacity (1 slot)
• Possibility to copy recordings to an SD card or a flash drive (1 USB 3.0 slot in the front)
• Built-in dual-band WiFi module (2.4 and 5 GHz) for automatic data synchronization
• Automatic HDD slot heating to start recording at temperatures from -40°C
• Vibration and shock absorbing design of electronics and drives according to military standard MIL-STD- 810G
• Wide operating temperature range -40°C to 80°C
• Built-in 3-axis G overload sensor
• Built-in 3-axis gyroscope
• GPS module with an external antenna
• Power supply for 4 x AHD cameras
• Power supply backup – the DVR continues to record after a short power failure (up to 8 s)
• Automatic recording after power supply is connected
Outdoor dome camera designed for vehicle video surveillance systems. The 1080p image in AHD standard is compatible with Protect DVRs.
• Compact dimensions for aesthetically pleasing installation inside the vehicle
• AHD signal with 1080p resolution
• StarLight sensor with a sensitivity of 0.01 lux
• IP68 rating
• AHD signal with 1080p resolution
• StarLight sensor with a sensitivity of 0.01 lux
• IP68 rating
Mobile 4-channel DVR for SD SDD recording with a resolution of 1080p. 8 alarm inputs allow integration with sensors. H.265 video compression.
• Recording of video and audio of 4 1080p AHD (1080p or lower) or CVBS (960H or lower) cameras at 25 fps
• Recording - 2 SD card slots up to 512 GB each
• Built-in GPS module with external antenna
• Built-in 3-axis G-sensor overload sensor
• Built-in 3-axis gyroscope
• Wide operating temperature range -40°C to 80°C
• Power supply back-up - the recorder continues to record after a short power failure (up to 8 s)
• Automatic recording after connecting power (turning the ignition key)
• Recording - 2 SD card slots up to 512 GB each
• Built-in GPS module with external antenna
• Built-in 3-axis G-sensor overload sensor
• Built-in 3-axis gyroscope
• Wide operating temperature range -40°C to 80°C
• Power supply back-up - the recorder continues to record after a short power failure (up to 8 s)
• Automatic recording after connecting power (turning the ignition key)
Four-channel mobile recorder recording to SD disks with 1080p quality. 8 alarm inputs allow for integration with sensors. H.265 compression, 4G LTE module.
• Recording image and sound of 4 cameras 1080p AHD (1080p or lower) or CVBS (960H or lower) at 25 fps
• Recording - 2 slots for SD cards with a capacity of up to 512 GB each
• Built-in 4G LTE communication module - SIM card slot and antenna
• Built-in GPS module with external antenna
• Built-in 3-axis G-sensor
• Built-in 3-axis gyroscope
• Wide operating temperature range -40°C to 80°C
• Power backup - the recorder continues to record image after a short power failure (up to 8 s)
• Automatic recording after connecting the power supply (turning the ignition)
• Recording - 2 slots for SD cards with a capacity of up to 512 GB each
• Built-in 4G LTE communication module - SIM card slot and antenna
• Built-in GPS module with external antenna
• Built-in 3-axis G-sensor
• Built-in 3-axis gyroscope
• Wide operating temperature range -40°C to 80°C
• Power backup - the recorder continues to record image after a short power failure (up to 8 s)
• Automatic recording after connecting the power supply (turning the ignition)
Outdoor dome camera designed for vehicle video surveillance systems. The 1080p image in the AHD standard is compatible with the Protect 804 DVR.
• Camera designed for outdoor installation, IP69 rating
• AHD signal with 1080p resolution
• StarLight image sensor with 0.001 lx sensitivity in black and white mode
• AHD signal with 1080p resolution
• StarLight image sensor with 0.001 lx sensitivity in black and white mode
Indoor camera designed for vehicle video surveillance systems. The 1080p image in AHD standard is compatible with Protect DVRs.
• 2 AHD cameras on StarLight sensor with 0.01 lux sensitivity and 1080p resolution.
• Easy installation with self-adhesive tape and the ability to adapt to the installation site with an articulating bracket
• Built-in microphone assigned to rear camera
• Easy installation with self-adhesive tape and the ability to adapt to the installation site with an articulating bracket
• Built-in microphone assigned to rear camera
The DS-QAZ1307G1T-E is a tube IP speaker from Hikvision used for surveillance systems.
• Power rating: 7 W
• Impedance: 8 ohm
• Built-in 2 electret microphones
• Audio functions: AEC, AGC, ANS, DRC
• Audio format support: MP3, WAV
• EMMC 4 GB drive (1 GB for audio files)
• Speech synthesizer: English
• Transmission type: live, scheduled, alarm
• Power output: 12 VDC, 25 mA max.
• Alarm input: 1
• Power supply: PoE (802.3af)
• Protection rating: IP67
• Impedance: 8 ohm
• Built-in 2 electret microphones
• Audio functions: AEC, AGC, ANS, DRC
• Audio format support: MP3, WAV
• EMMC 4 GB drive (1 GB for audio files)
• Speech synthesizer: English
• Transmission type: live, scheduled, alarm
• Power output: 12 VDC, 25 mA max.
• Alarm input: 1
• Power supply: PoE (802.3af)
• Protection rating: IP67
The DS-QAZ1325G1T is a tube IP speaker from Hikvision used for surveillance systems.
• Power rating: 25 W
• Impedance: 8 ohm
• Built-in 2 electret microphones
• Audio functions: AEC, AGC, ANS, DRC
• Audio format support: MP3, WAV
• EMMC 4 GB drive (1 GB for audio files)
• Speech synthesizer: English
• Transmission type: live, scheduled, alarm
• Power output: 12 VDC, 25 mA max.
• Power supply: 24 VDC
• Protection rating: IP67
• Impedance: 8 ohm
• Built-in 2 electret microphones
• Audio functions: AEC, AGC, ANS, DRC
• Audio format support: MP3, WAV
• EMMC 4 GB drive (1 GB for audio files)
• Speech synthesizer: English
• Transmission type: live, scheduled, alarm
• Power output: 12 VDC, 25 mA max.
• Power supply: 24 VDC
• Protection rating: IP67
Power adapter with 5 VDC voltage and 2 A current output, equipped with USB type A connector.
• Output voltage 5 VDC
• Output current 2 A
• USB type A port
• Color: black
• Output current 2 A
• USB type A port
• Color: black
The cable is used to connect the device to the mains. An example of its use would be the power supply of a computer.
• Length: 1.5 m
• IEC320 connector
• IEC320 connector
The cable is used to extend the power cable from the computer's power supply.
• Length: 1.5 m
• IEC C13, IEC C14 connectors
• IEC C13, IEC C14 connectors
The YDY cable consists of three copper conductors insulated from each other with plastic.
• Number of conductors: 3
• Core diameter: 2.5 mm²
• Type: YDY
• Length 100 m
• Core diameter: 2.5 mm²
• Type: YDY
• Length 100 m
YKY cable is one type of electrical conductor used in low-voltage electrical systems.
• Number of conductors: 3
• Core diameter: 2.5 mm²
• Type: YKY
• Length: per metre
• Application: outdoor
• Core diameter: 2.5 mm²
• Type: YKY
• Length: per metre
• Application: outdoor
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 2-wire, through version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 2-wire, through version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 2-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 2-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 3-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 3-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 5-wire version
• Installation of wires from 0.14 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 5-wire version
• Installation of wires from 0.14 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
The UY2 double quick-connector (Scotchlok) allows wires to be connected without stripping the insulation.
Designed for low-voltage copper cables.
Designed for low-voltage copper cables.
• Connection of 2 cable conductors
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
A set of active converters for Ethernet and PoE transmission over coaxial cable, 1 channel 100 Mbps, PoE IN 802.3at/af or Passive (xCOAX3-SW), PoE OUT Passive up to 500 m.
• Transmission range via coaxial cable up to 500 m at 100 Mbps
• Interference immunity and watchdog function in COAX path
• Power supply from 802.3at/af PoE switch or PoE PASSIVE switch
• Power supply capability for 802.3at/af PoE or PoE PASSIVE receivers
up to 30 W total power across the entire power path
• Very low power consumption - 1.35 W total path
• Small module size
• Clear optical indication of power and data transmission status
• Easy and quick start-up without configuring parameters
• Interference immunity and watchdog function in COAX path
• Power supply from 802.3at/af PoE switch or PoE PASSIVE switch
• Power supply capability for 802.3at/af PoE or PoE PASSIVE receivers
up to 30 W total power across the entire power path
• Very low power consumption - 1.35 W total path
• Small module size
• Clear optical indication of power and data transmission status
• Easy and quick start-up without configuring parameters
The ETH10-2wire-SET is a set of active converters designed for Ethernet data and PoE power transmission, using only 2 wires.
• A set of converters for Ethernet data and PoE power transmission using 2 wires (e.g. one pair of UTP cable)
• Enables installation of cameras or other IP PoE devices in places where it is difficult or uneconomic to replace the existing wiring
• Power from any PoE switch or 10...56 V
• Maximum transmission range is 1000 m, depending on the type, length and cross-section of the cables
• Small size allows easy installation in small spaces, such as in an installation box
• Enables installation of cameras or other IP PoE devices in places where it is difficult or uneconomic to replace the existing wiring
• Power from any PoE switch or 10...56 V
• Maximum transmission range is 1000 m, depending on the type, length and cross-section of the cables
• Small size allows easy installation in small spaces, such as in an installation box
The active converter kit allows Ethernet data and PoE power to be transmitted over a single pair of cables. Ideal when replacing cabling is not possible or cost-effective.
• Ethernet transmission over any 2 wires of cable
• Transmission of 100 Mbps up to 300 m and 10 Mbps up to 800 m (UTP cable)
• Power supply possible from PoE switch in 802.3af, 802.3at standard or PoE Passive (PoE IN port)
• Clear indication of operation, bandwidth and transmission status
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 1.35 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Transmission of 100 Mbps up to 300 m and 10 Mbps up to 800 m (UTP cable)
• Power supply possible from PoE switch in 802.3af, 802.3at standard or PoE Passive (PoE IN port)
• Clear indication of operation, bandwidth and transmission status
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 1.35 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
A compact Gigabit Ethernet-SFP converter with a wide supply voltage range of 12-58 V.
• 10/100/1000 autonegotiation on LAN port + PoE
• Power supply via screw connector (Vin) wide input voltage range
• Easy and quick commissioning without configuring parameters
• Very low power consumption (< 1.5 W)
• Small module size
• Power supply via screw connector (Vin) wide input voltage range
• Easy and quick commissioning without configuring parameters
• Very low power consumption (< 1.5 W)
• Small module size
LZ-1 is a passive device distributing power from a single power supply source.
• Number of outputs: 8 (terminal strips)
• Number of inputs: 1 Socket 5.5/2.1
• Maximum supply current: 2,5 A
• Maximum voltage: 24 V
• Number of inputs: 1 Socket 5.5/2.1
• Maximum supply current: 2,5 A
• Maximum voltage: 24 V
The LZ-6 is a simple splitter allowing several devices to be powered from a single higher power supply. The connector splits the power supply into 6 outputs.
• Number of outputs: 6 (terminal strips)
• Number of inputs: 2 5.5/2.1 sockets, terminal blocks
• Maximum supply current: 6 A
• Maximum voltage: 24 V
• Number of inputs: 2 5.5/2.1 sockets, terminal blocks
• Maximum supply current: 6 A
• Maximum voltage: 24 V
The LZ-8/POL is a simple splitter allowing several devices to be powered from a single higher power supply. The connector splits the power supply into 8 outputs.
• Number of outputs: 8 (terminal strips)
• Number of inputs: 2 5.5/2.1 sockets, terminal blocks
• Maximum supply current: 5,6 A
• Maximum voltage: 24 V
• Number of inputs: 2 5.5/2.1 sockets, terminal blocks
• Maximum supply current: 5,6 A
• Maximum voltage: 24 V
Power supply with DC 5.5/2.1 connector (polarity “+” inside) for use with devices powered by 12 VDC and maximum current consumption of 1 A.
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 1 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 1 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
Power supply with DC 5.5/2.1 connector (polarity “+” inside) for use with devices powered by 12 VDC and maximum current consumption of 2 A.
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 2 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 2 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
Power supply with a DC 5.5/2.1 plug (polarity "+" inside) for use with devices supplied with 12 V DC and a maximum current consumption of 3 A.
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 3 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 3 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
Power supply with a DC 5.5/2.1 plug (polarity "+" inside) for use with devices supplied with DC 12 V and a maximum current consumption of 5 A.
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 5 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 5 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with current consumption not exceeding 1A. It is suitable for the majority of CCTV cameras.
• Power supply dedicated for CCTV cameras
• 12 VDC output
• Max load: 1 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
• 12 VDC output
• Max load: 1 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
The 12 V/1.5 A PROTEC switched-mode power supply in an aesthetically pleasing splash-proof housing is suitable for external wall mounting.
• Power supply dedicated for CCTV cameras
• 12 V output voltage
• Maximum output current 1.5 A
• Output: 2.1/5.5 mm plug on cable
• Splash-proof housing for outdoor mounting under canopy
• IP53 rating
• The video cable connection can also be hidden under the cover
• 12 V output voltage
• Maximum output current 1.5 A
• Output: 2.1/5.5 mm plug on cable
• Splash-proof housing for outdoor mounting under canopy
• IP53 rating
• The video cable connection can also be hidden under the cover
Switched-mode power supply designed to power 5 VDC electronic devices equipped with 2.1/5.5 socket ("+" in the midpoint), with current consumption not exceeding 2 A.
• AC input voltage 100-240 V
• Stabilised output voltage 5 V
• Output power 11.5 W
• Current capacity 2.3 A
• Plug 2.1/5.5 on cable
• Stabilised output voltage 5 V
• Output power 11.5 W
• Current capacity 2.3 A
• Plug 2.1/5.5 on cable
Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with total current consumption not exceeding 2 A.
• AC/DC adapter dedicated for CCTV cameras
• Output voltage: 12 VDC
• Max. output current: 2 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
• Output voltage: 12 VDC
• Max. output current: 2 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
Power supply in a sealed IP67 housing with a DC 5.5/2.1 plug (polarity “+” inside).
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 1.5 A
• Protection rating IP67
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 1.5 A
• Protection rating IP67
• Overcurrent protection
• Surge protection
• Short-circuit protection
Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with current total consumption not exceeding 5 A. It is suitable for the majority of CCTV cameras.
• AC/DC adapter dedicated for CCTV systems
• 12 VDC output
• Current capacity: 5 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
• 12 VDC output
• Current capacity: 5 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
The power supply unit is dedicated for supplying 12 VDC voltage to CCTV cameras (max total current: 1 A), from AC power network (90-264 VAC, 50-60 Hz).
PSC12015 power supply designed to supply 230 VAC power to cameras in a CCTV system requiring 12 VDC voltage.
• Power supply with 2.1/5.5 socket and cable connector for external mounting
• 12V output voltage
• Maximum output current 1.5 A
• Flush mount
• IP67
• Voltage 12 V
• 12V output voltage
• Maximum output current 1.5 A
• Flush mount
• IP67
• Voltage 12 V
The HPSDC-12V8X1A stabilised power supply is designed to supply CCTV equipment requiring a stabilised voltage of 12 V DC.
• Switching-mode power supply dedicated for CCTV cameras
• Output voltage 12 V (DC 12-15 V)
• Maximum output current 7 A
• 8 outputs with fuses of 1 A each
• Output voltage 12 V (DC 12-15 V)
• Maximum output current 7 A
• 8 outputs with fuses of 1 A each
This power supply is designed to supply CCTV devices requiring a stabilised voltage of 12 VDC.
• Power supply intended for CCTV cameras
• Pulse output voltage 12 V (DC 12 – 15 V)
• Maximum power 180 W
• 16 1 A outputs
• Pulse output voltage 12 V (DC 12 – 15 V)
• Maximum power 180 W
• 16 1 A outputs
The TRZ 80 V A /17 V /24 V /30 V series AC voltage transformer is designed to supply equipment requiring 17 V, 24 V, 30 V AC voltage.
• Power: 80 V
• Power: 230 V / 50 Hz / 0.4 A
• Output voltage: AC 17 V / 4.5 A or 24 V / 3.3 A or 30 V / 2.7 A
• Housing: PC/ABS, V-O, IP43
• Temperature fuse 130º
• Note: resin-filled transformer
• Power: 230 V / 50 Hz / 0.4 A
• Output voltage: AC 17 V / 4.5 A or 24 V / 3.3 A or 30 V / 2.7 A
• Housing: PC/ABS, V-O, IP43
• Temperature fuse 130º
• Note: resin-filled transformer
The PSCU04344SEP power supply is designed to solve the problem of long cable lengths (voltage drops).
• Power supply designed for CCTV cameras in case of long distances
• DC 34 V /4x1 A power output
• 4 independent, galvanically separated outputs protected by 1 A fuses
• LED optical indication
• DC 34 V /4x1 A power output
• 4 independent, galvanically separated outputs protected by 1 A fuses
• LED optical indication
The ZBF-12-4A-17 Ah buffer power supply is designed for uninterrupted supply to devices requiring stabilised voltage of 12 V DC (10-5-13.8 V).
• 9.5-13.8 V output voltage
• Separate battery charging path and consumer power path
• Battery charging current 1 A / 4 A, jumper selectable
• Dedicated battery 17 - 18 Ah
• High efficiency (74%)
• Separate battery charging path and consumer power path
• Battery charging current 1 A / 4 A, jumper selectable
• Dedicated battery 17 - 18 Ah
• High efficiency (74%)
Buffer power supply 13.8 V DC / 2.5 A, high efficiency, LED, space for 7 Ah battery, charge control and protection.
• Interruptible power supply DC 13.8 V 2A + 0.5 A charging
• Space for battery up to 7 Ah
• High efficiency (up to 90%)
• Charge and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
• Space for battery up to 7 Ah
• High efficiency (up to 90%)
• Charge and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
Buffer power supply 13.8 V DC / 3.5 A, high efficiency, LED, space for 7 Ah battery, charge control and protection.
• Interruptible DC 13.8 V 3 A +0.5 A charge battery slot up to 7 Ah
• Battery slot for up to 7 Ah battery
• High efficiency (up to 90%)
• Control of battery charging and maintenance
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
• Battery slot for up to 7 Ah battery
• High efficiency (up to 90%)
• Control of battery charging and maintenance
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
Buffer power supply 13.8 V DC / 3.5 A, high efficiency, LED, space for 17 Ah battery, charge control and protection.
• 13.8 V 3 A DC power supply + 0.5 A charging
• Battery storage capacity up to 17 Ah
• High efficiency (up to 90%)
• Charging and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
• Battery storage capacity up to 17 Ah
• High efficiency (up to 90%)
• Charging and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
Buffer power supply 13.8 V DC / 5.5 A, high efficiency, LED, space for 17 Ah battery, charge control and protection.
• Interruptible DC 13.8 V 4.5/4 A + 0.5/1 A charge
• Space for battery up to 17 Ah
• High efficiency (up to 90%)
• Charge and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
• Space for battery up to 17 Ah
• High efficiency (up to 90%)
• Charge and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
Buffer power supply 13.8 V DC / 7A, high efficiency, LED, space for 17 Ah battery, charge control and protection.
• Interruptible DC 13.8 V 6/5 A power supply + 1/2 A charging
• Space for batteries up to 17 Ah
• High efficiency (up to 90%)
• Charging and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
• Space for batteries up to 17 Ah
• High efficiency (up to 90%)
• Charging and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
Buffer power supply 13.8 V DC, 8×1 A, according to EN50131-6 and EN60839.
• High efficiency - up to 86%
• 8 x 1A outputs
• Battery charging current selectable via jumper
• Compliance with EN 50131-6:2017 for intrusion detection systems (IDS), in grades 1 and 2 and environmental class II
• Compliance with EN 60839-11-2:2015+AC:2015 for access control (KD) systems and environmental class I
• Protection of the battery against over-discharge (UVP)
• START function - manual activation of power supply from the battery
• LED visual indication
• Dynamic battery test
• Battery circuit continuity check
• 8 x 1A outputs
• Battery charging current selectable via jumper
• Compliance with EN 50131-6:2017 for intrusion detection systems (IDS), in grades 1 and 2 and environmental class II
• Compliance with EN 60839-11-2:2015+AC:2015 for access control (KD) systems and environmental class I
• Protection of the battery against over-discharge (UVP)
• START function - manual activation of power supply from the battery
• LED visual indication
• Dynamic battery test
• Battery circuit continuity check
Universal 12/24 V buffer module to ensure continuity of power supply to the vehicle's equipment and to protect the main battery from discharge.
• Possibility to build a buffer system in vehicle installations
• Maintains equipment in operation when the engine is switched off without the risk of discharging the main battery
• Automatic power supply detection minimising interference with the vehicle's electrical installation.
• Supports 12 V and 24 V systems
• Power output up to 140 W (for 24 V / 24 V configuration)
• Clear LED indication of operating mode and battery level
• Wide operating temperature range: -25°C to +65°C
• Maintains equipment in operation when the engine is switched off without the risk of discharging the main battery
• Automatic power supply detection minimising interference with the vehicle's electrical installation.
• Supports 12 V and 24 V systems
• Power output up to 140 W (for 24 V / 24 V configuration)
• Clear LED indication of operating mode and battery level
• Wide operating temperature range: -25°C to +65°C
The MWS 7.2-12 is a maintenance-free lead-acid (VRLA) battery.
• VLRA battery - maintenance free, no maintenance required such as topping up water, checking electrolyte
• Can operate in any position
• Long life
• Small size
• Slow self-discharge process
• Can operate in any position
• Long life
• Small size
• Slow self-discharge process
The Securbat CB 7-12 SB gel battery is a maintenance-free lead-acid (VRLA) battery.
• VLRA battery - maintenance free, no maintenance required such as topping up water and checking electrolyte
• Can operate in any position
• Long life
• Small size
• Slow self-discharge process
• Can operate in any position
• Long life
• Small size
• Slow self-discharge process
Alarmtec BP 7-12 is a maintenance-free valve-regulated lead-acid battery (VRLA).
• VLRA battery - maintenance free, no maintenance required such as topping up water and checking electrolyte
• Can operate in any position
• Life expectancy is 3 - 5 years
• Small size
• Slow self-discharge process
• Can operate in any position
• Life expectancy is 3 - 5 years
• Small size
• Slow self-discharge process
The Acumax AML 7-12 battery is made using modern AGM technology - the electrolyte is trapped in fibreglass separators.
• VLRA battery - maintenance free, no maintenance required such as topping up water and checking electrolyte
• Can operate in any position
• Life expectancy is 10-12 years
• Small size
• Slow self-discharge process
• Can operate in any position
• Life expectancy is 10-12 years
• Small size
• Slow self-discharge process
The MWS 18-12 battery is a maintenance-free lead-acid (VRLA) battery.
• VLRA battery - maintenance free, no maintenance required such as topping up water and checking electrolyte
• Can operate in any position
• Long life
• Small size
• Slow self-discharge process
• Can operate in any position
• Long life
• Small size
• Slow self-discharge process
The Securbat CB 17-12 SB rechargeable battery is a maintenance-free lead-acid battery (VRLA).
• VLRA battery - maintenance-free, does not require maintenance activities such as adding water, checking the electrolyte
• Can work in any position
• Long lasting service life
• Small size
• Slow self-discharge process
• Can work in any position
• Long lasting service life
• Small size
• Slow self-discharge process
Alarmtec BP 18-12 is a maintenance-free valve-regulated lead-acid battery (VRLA).
• VLRA battery - maintenance free, no maintenance required such as topping up water, checking electrolyte
• Can operate in any position
• Life expectancy is 3 - 5 years
• Small size
• Slow self-discharge process
• Can operate in any position
• Life expectancy is 3 - 5 years
• Small size
• Slow self-discharge process
The Acumax AML 18-12 battery is made using modern AGM technology - the electrolyte is trapped in fibreglass separators.
• VLRA battery - maintenance free, no maintenance required such as topping up water and checking electrolyte
• Can operate in any position
• Life expectancy is 10-12 years
• Small size
• Slow self-discharge process
• Can operate in any position
• Life expectancy is 10-12 years
• Small size
• Slow self-discharge process
SWS-60 PoE switch power supply system designed to supply PoE switches with 48 - 53 V DC, 60 W power.
• High efficiency: 90%
• Enclosure: metal, white color (RAL 9003)
• Removable universal mounting plate for quick installation and removal of PoE switches
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Surge protection
• Tamper protection (detection of opening the case)
• Enclosure: metal, white color (RAL 9003)
• Removable universal mounting plate for quick installation and removal of PoE switches
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Surge protection
• Tamper protection (detection of opening the case)
The SWB-60 buffer power supply system is designed for uninterruptible power supply of PoE switches with 52 VDC.
• High efficiency (83%)
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• START button to start the power supply from the battery
• Lightning indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection - protection against opening the housing, against reverse battery connection
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• START button to start the power supply from the battery
• Lightning indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection - protection against opening the housing, against reverse battery connection
The ULTIPOWER power supply is used to supply power to devices using PoE technology.
• Standard 802.3af
Powering devices via PoE
1x PoE port, 1x LAN port
PoE 802.3af standard - max. power 15.4 W
• Powering devices via PoE
• 1x PoE port, 1x LAN port
• PoE 802.3af standard - max. power 15.4 W
• 1x PoE port, 1x LAN port
• PoE 802.3af standard - max. power 15.4 W
The SWB-120 buffer power supply system is designed for uninterruptible power supply of PoE switches with 52 VDC.
• High efficiency (87%)
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• START button to start the power supply from the battery
• Lightning indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• START button to start the power supply from the battery
• Lightning indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection
SWS-150 PoE switch power supply system designed to supply PoE switches with 48 - 53 V DC, 150 W power.
• High efficiency: 85%
• Enclosure: metal, white color (RAL 9003)
• Removable universal mounting plate for quick installation and removal of PoE switches
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Tamper protection (detection of opening the case)
• Enclosure: metal, white color (RAL 9003)
• Removable universal mounting plate for quick installation and removal of PoE switches
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Tamper protection (detection of opening the case)
The ULTIPOWER power supply is used to supply power to devices using PoE technology.
• Standard 802.3at
A Power supply system for PoE switches with 120 W of power in an ABS enclosure with an IP56 rating.
• High efficiency: 85%
• ABS enclosure with IP56 rating
• Glands allow free cable routing
• Post mountable (requires OZB-4 adapter)
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Surge protection
• Tamper protection (enclosure opening detection)
• ABS enclosure with IP56 rating
• Glands allow free cable routing
• Post mountable (requires OZB-4 adapter)
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Surge protection
• Tamper protection (enclosure opening detection)
Buffer power supply system for uninterruptible power supply of PoE switches with 52 V housed in an IP44-rated ABS enclosure.
• High efficiency (83%)
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• ABS enclosure – IP44
• Fitted cable glands allow free cable routing
• Post mountable (requires OZB-4 adapter)
• Demountable universal mounting plate
• Start button to start the power supply from the battery
• Optical indication
• Battery over-discharge protection
• Short circuit protection (SCP), overload protection (OLP), over voltage protection (OVP, overvoltage protection, tamper protection
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• ABS enclosure – IP44
• Fitted cable glands allow free cable routing
• Post mountable (requires OZB-4 adapter)
• Demountable universal mounting plate
• Start button to start the power supply from the battery
• Optical indication
• Battery over-discharge protection
• Short circuit protection (SCP), overload protection (OLP), over voltage protection (OVP, overvoltage protection, tamper protection
• Standard 802.3af/at
• Ports 10/100/1000 Mbps
• Ports 10/100/1000 Mbps
The switched-mode power supply is designed to power 52 VDC electronic devices equipped with 2.1/5.5 sockets ("+" in the midpoint), with current consumption up to 1.15 A.
• Power output: 1.15 A/52 V DC
• Efficiency: 90%
• Energy class: V
• Protections: SCP, OLP
• Operation indication: LED
• Efficiency: 90%
• Energy class: V
• Protections: SCP, OLP
• Operation indication: LED
Equipped with a PoE adapter, the ULTIPOWER supply is dedicated for powering devices using PoE technology (max. power: 65 W).
• Maximum power 65 W
• Compatible with IEEE802.3at/af standard
• Compatible with IEEE802.3at/af standard
Gigabit PoE adapter with integrated voltage reduction converter. It enables devices with a nominal voltage of 12 V to be powered from a PoE 802.3af supply.
• Designed to work in 10/100/1000Mbps networks
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
Universal PoE adapter with integrated voltage-reducing adapter. Three different voltages can be obtained at the output: 5 V, 12 V or 24 V and PoE.
• Supports output voltages of 5 V, 12 V or 24 V via twisted pair
• Non-standard PoE configuration possible, e.g. 24 V PoE passive
• Power output up to 20 W
• High energy efficiency >90%
• Works in 10/100/1000 Mbps networks
• Full compatibility with 802.3af/at PoE switches
• Compact dimensions for installation in limited space (e.g. in the camera base, at the door station)
• Non-standard PoE configuration possible, e.g. 24 V PoE passive
• Power output up to 20 W
• High energy efficiency >90%
• Works in 10/100/1000 Mbps networks
• Full compatibility with 802.3af/at PoE switches
• Compact dimensions for installation in limited space (e.g. in the camera base, at the door station)
The device reduces the voltage on the DC plug to 12 V and simultaneously transfers PoE power to the RJ45 output.
• PoE voltage reduction from 48 V to 12 V – available at a DC plug (illuminator, microphone, heater)
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
The P-POE2 Splitter allows you to connect two devices with a single UTP cat. 5e twisted pair cable.
• Transmits power and data to two PoE IP cameras
• Uses UTP cat. 5e twisted pair cable
• Designed to work in 10/100 Mbps networks
• Uses UTP cat. 5e twisted pair cable
• Designed to work in 10/100 Mbps networks
Gigabit PoE splitter with 12 V output, compliant with 802.3af/at/bt, ideal for powering devices with power consumption of up to 40 W.
• Large range of output power up to 40 W
• Power supply to 12 V DVR via PoE 802.3bt or ATTE switch
• Power supply from PoE switch (802.3af/at/bt) or passive PoE (44-56 V)
• High energy efficiency of over 90%
• Suitable for 10/100/1000 Mbps networks
• Compact dimensions for installation in small enclosures
• Power supply to 12 V DVR via PoE 802.3bt or ATTE switch
• Power supply from PoE switch (802.3af/at/bt) or passive PoE (44-56 V)
• High energy efficiency of over 90%
• Suitable for 10/100/1000 Mbps networks
• Compact dimensions for installation in small enclosures
Gigabit PoE adapter with voltage reduction converter. The device enables power conversion from PoE 802.3af or PoE Passive (35...56 V) to PoE Passive 24 V.
• Power WiFi APs requiring 24 V PoE from any PoE switch.
• Designed to work in 10/100/1000Mbps networks
• Easy to implement and install power backup for access points using IPUPS kits
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
• Designed to work in 10/100/1000Mbps networks
• Easy to implement and install power backup for access points using IPUPS kits
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
The POE-802.3AF/C stabiliser allows cameras that do not support PoE to be powered by a device compliant with the 802.3af or 802.3at standards.
• Stabilizer changes 48 V POE voltage to 12 V for IP cameras powered by 12 V
The power supply is used to supply power to devices using PoE technology.
• 48 V output voltage
• Maximum output current 500 mA
• Maximum output current 500 mA
PoE switch with integrated power supply in a DIN4 housing for mounting on a TH35 rail. It allows up to 3 IP PoE devices to be powered.
• Powers up to 3 PoE 802.3af/at/bt60 receivers
• Up to 120 W total power from the power supply
• High module efficiency >90%
• Redundant power supply (ensures power continuity through a second module)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and power consumption
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Up to 120 W total power from the power supply
• High module efficiency >90%
• Redundant power supply (ensures power continuity through a second module)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and power consumption
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
The xPoE-4-11A-HS has been designed as LAN extender (repeater) and PoE power supply.
• Compact device size
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100 Mbps switch)
• Up to 40 W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5 W)
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100 Mbps switch)
• Up to 40 W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5 W)
3-port PoE switch 10/100 Mbps, extender (1xPoE IN 802.3at/af + 2xPoE OUT), PoE (max 40W), sequential start PoE OUT
• Miniature design for mounting in camera base
• Powered from another PoE switch supporting 802.3at, 802.3af or passive standard (PoE IN port)
• Power up to 2 PoE receivers 802. 3at/af or Passive (PoE OUT ports)
• Cascade power supply (one switch powers another)
• Strengthens and distributes network signal (fully functional 100 Mbps switch)
up to 40 W total power
• Easy and fast startup without configuration of parameters
• Wide operating temperature range
• Very low power consumption (< 0.5 W)
• Sequential start of PoE outputs
• Powered from another PoE switch supporting 802.3at, 802.3af or passive standard (PoE IN port)
• Power up to 2 PoE receivers 802. 3at/af or Passive (PoE OUT ports)
• Cascade power supply (one switch powers another)
• Strengthens and distributes network signal (fully functional 100 Mbps switch)
up to 40 W total power
• Easy and fast startup without configuration of parameters
• Wide operating temperature range
• Very low power consumption (< 0.5 W)
• Sequential start of PoE outputs
Switch for 5 IP cameras, in outdoor housing, 6-port 10/100 Mbps (5xPoE + 1xUplink), PoE power supply on 4 pairs, integrated power supply 55 V 90 W.
• Compact size
• Powering 5 PoE 802. 3at/af or PASSIVE receivers
• Power can be switched off on selected PoE ports
• Clear optical indication of power and data transmission status
• Up to 40 W power per single PoE port (total 90 W power budget)
• Easy and fast startup without having to configure parameters
• High efficiency of integrated power supply (>90%)
• Additional screw connector makes it easy to pick up 55 VDC power to other devices
• Scalability by attaching additional switches of xPoE/IP series and IPB/IPUPS
• Supply of cables can be hidden inside the enclosure
• Cable exit through 2x29 mm rubber glands installed in the enclosure
• Cables with crimped plugs (after cutting the plugs) can be inserted
• Power cable and 2 brackets included for enclosure installation without compromising the IP55 protection degree
• Powering 5 PoE 802. 3at/af or PASSIVE receivers
• Power can be switched off on selected PoE ports
• Clear optical indication of power and data transmission status
• Up to 40 W power per single PoE port (total 90 W power budget)
• Easy and fast startup without having to configure parameters
• High efficiency of integrated power supply (>90%)
• Additional screw connector makes it easy to pick up 55 VDC power to other devices
• Scalability by attaching additional switches of xPoE/IP series and IPB/IPUPS
• Supply of cables can be hidden inside the enclosure
• Cable exit through 2x29 mm rubber glands installed in the enclosure
• Cables with crimped plugs (after cutting the plugs) can be inserted
• Power cable and 2 brackets included for enclosure installation without compromising the IP55 protection degree
PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
PoE switch acting as LAN extender/repeater. Allows the connection of 3 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at, 802.3bt or PoE Passive (PoE IN port)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear operational and identification status indication
• Low power consumption (< 0.5 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear operational and identification status indication
• Low power consumption (< 0.5 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
Gigabit PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
Gigabit, 5-port PoE switch with LAN extender function, ideal for connecting multiple devices (e.g. IP cameras) via a single UTP cable.
• Can be powered from another PoE switch in 802.3af, 802.3at, 802.3bt60, 802.3bt90 or PoE Passive (PoE IN port) standards
• Increases and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 4 PoE 802.3af/at/bt60 receivers
• Up to 90 W total power when powered via UTP
• Throughput of the device at 1000 Mbps
• Clear operating and identification status indication
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Increases and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 4 PoE 802.3af/at/bt60 receivers
• Up to 90 W total power when powered via UTP
• Throughput of the device at 1000 Mbps
• Clear operating and identification status indication
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
The extender set extends the range of the LAN (PoE) on the UTP cable up to 800 m. It is applicable when the PoE switch-receiver distance exceeds 100 m.
• Power supply possible from PoE switch in 802.3af, 802.3at standard, or PoE Passive (PoE IN port)
• Power available to PoE receiver up to 800 m (10 Mbps)
• 100 Mbps available up to a maximum of 500 m
• Clear operating status and bandwidth indication
• Easy and quick start-up without configuring parameters
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Wide operating temperature range
• Power available to PoE receiver up to 800 m (10 Mbps)
• 100 Mbps available up to a maximum of 500 m
• Clear operating status and bandwidth indication
• Easy and quick start-up without configuring parameters
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Wide operating temperature range
PoE switch in IP68 casing acting as LAN extender/repeater. Allows the connection of 3 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at, 802.3bt or PoE Passive (PoE IN port)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered via UTP
• High IP protection (IP68)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and identification
• Low power consumption (< 0.5 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range (-25°C...+65°C)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered via UTP
• High IP protection (IP68)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and identification
• Low power consumption (< 0.5 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range (-25°C...+65°C)
The Power over Ethernet (PoE) adapter allows LAN devices to be powered via a 4-pair twisted pair cable (e.g. UTP).
• Fast Ethernet ports
The device allows 4 LAN devices to be powered via an Ethernet cable. The adapter is ideal for use with buffer power supplies.
The 4p MultiPoE adapter is a solution that makes it very easy to power up to 4 devices using twisted-pair cable.
• Four Fast Ethernet paths
The device allows 4 LAN devices to be powered via a twisted pair cable. The adapter is ideal for use with PoE devices.
• Four Gigabit Ethernet lanes
The device allows 8 LAN devices to be powered via a twisted pair cable. The adapter is ideal for use with PoE devices.
• Eight Gigabit Ethernet lanes
The MikroTik RBGPOE is a PoE adapter for powering RouterBOARDs via a Gigabit Ethernet port.
• Gigabit Ethernet port
• Power supply voltage - 18 - 57 VDC
• Output voltage - 18 - 57 VDC
• Power supply voltage - 18 - 57 VDC
• Output voltage - 18 - 57 VDC
Switch-mode power supply 24 V DC/1 A integrated in the PoE injector. For supplying e.g. the RouterBoard.
• 230 V AC / 24 V DC 1 A
The power supply is used to supply power to network devices, control systems and automation equipment for which stabilised DC voltage is required.
• 85...264 V AC or 120...373 V DC / 21.6...28.8 V DC 4.5 A
The MDR-60-48 switched-mode power supply has been specially designed to power industrial switches.
• 100...240 V AC / 48 V DC 1.25 A
• DIN rail mounting
• DIN rail mounting
The MDR-100-48 switched-mode power supply has been specially designed for powering industrial switches, control systems and automation equipment.
• 100...240 VAC/48 VDC, 2 A
• DIN rail mounting
• DIN rail mounting
The CyberPower OR600ELCDRM1U provides home users, office users and industrial installations with back-up power.
• Automatic Voltage Voltage Regulation AVR
• Full digital control based on microprocessor technology
• Depth: 235 mm
• 6 power outputs
• GreenPower UPS technology
• 19" rack mountable
• Power 600 V A
• Programmed protection against excessive drop and rise of mains voltage
• Equipment protection against EMI, RFI
• Telephone/DSL line surge protection
• End of life schedule
• Full digital control based on microprocessor technology
• Depth: 235 mm
• 6 power outputs
• GreenPower UPS technology
• 19" rack mountable
• Power 600 V A
• Programmed protection against excessive drop and rise of mains voltage
• Equipment protection against EMI, RFI
• Telephone/DSL line surge protection
• End of life schedule
Uninterruptible power supply dedicated to home, office and industrial uses. Built with a full sine wave online architecture.
• Top quality branded Green Cell UPS
• Accumulators that guarantee long backup time, high durability and safety
• Modern control software for easy, fast and intuitive operation of the unit
• Power: 1000 V A (900 W)
• Topology: online
• Battery: 2 x 12 V 9 Ah batteries - battery run time at 100% load 3-5 min.
• Battery life: 5 years
• 6 power outputs
• Full sinusoidal output voltage
• Alarm with beep when mains power is not available, battery is low, overload or on system failure
• Replaceable batteries
• Mains protection
• LCD status display
• Cold start function
• USB connectivity port
• Management software
• Rack-mountable
• Accumulators that guarantee long backup time, high durability and safety
• Modern control software for easy, fast and intuitive operation of the unit
• Power: 1000 V A (900 W)
• Topology: online
• Battery: 2 x 12 V 9 Ah batteries - battery run time at 100% load 3-5 min.
• Battery life: 5 years
• 6 power outputs
• Full sinusoidal output voltage
• Alarm with beep when mains power is not available, battery is low, overload or on system failure
• Replaceable batteries
• Mains protection
• LCD status display
• Cold start function
• USB connectivity port
• Management software
• Rack-mountable
The OR1000 UPS provides uninterrupted power supply for servers, network equipment, etc. with 100 V A.
• Automatic voltage regulation of the input voltage AVR
• Full digital control based on microprocessor technology
• 6 power outputs
• GreenPower UPS technology
• 19" rack mountable
• Power of 1000 V A
• Programmable protection against excessive drop and rise of mains voltage
• Equipment protection against EMI, RFI
• Telephone/DSL line surge protection
• Termination schedule
• Full digital control based on microprocessor technology
• 6 power outputs
• GreenPower UPS technology
• 19" rack mountable
• Power of 1000 V A
• Programmable protection against excessive drop and rise of mains voltage
• Equipment protection against EMI, RFI
• Telephone/DSL line surge protection
• Termination schedule
The OR1500ERM1U UPS provides uninterrupted power supply for servers, network equipment, etc. with a capacity of 1500 VA.
• Automatic Voltage Voltage Regulation AVR
• Full digital control based on microprocessor technology.
• 6 power outputs
• 19" rack mountable
• Power 1000 VA
• GreenPower UPS technology
• Power Management software included
• Programmable protection against excessive drop and rise of mains voltage
• Equipment protection against EMI, RFI
• Telephone/DSL line surge protection
• End of life schedule
• Full digital control based on microprocessor technology.
• 6 power outputs
• 19" rack mountable
• Power 1000 VA
• GreenPower UPS technology
• Power Management software included
• Programmable protection against excessive drop and rise of mains voltage
• Equipment protection against EMI, RFI
• Telephone/DSL line surge protection
• End of life schedule
The PR1500ERT2U UPS provides an uninterrupted power supply for servers, network equipment, etc. with 1500 V A.
• Line-interactive UPS technology - full sine wave output
• Automatic voltage regulation AVR
• Energy Saving Technology
• Compatible with active PFC
• Hot-swap battery replacement, even during operation
• 10 power outputs
• 19" rack mountable
• Power of 1500 V A
• Programmable overvoltage and undervoltage protection
• Interference and surge protection
• EMI and RFI filtering
• LCD status display USB connectivity port
• Serial communication port
• Emergency shutdown (EPO) port
• PowerPanel management software
• SNMP / HTTP remote management (optional)
• Rack/Tower mounting system adaptation
• Automatic voltage regulation AVR
• Energy Saving Technology
• Compatible with active PFC
• Hot-swap battery replacement, even during operation
• 10 power outputs
• 19" rack mountable
• Power of 1500 V A
• Programmable overvoltage and undervoltage protection
• Interference and surge protection
• EMI and RFI filtering
• LCD status display USB connectivity port
• Serial communication port
• Emergency shutdown (EPO) port
• PowerPanel management software
• SNMP / HTTP remote management (optional)
• Rack/Tower mounting system adaptation
Uninterruptible power supply dedicated to home, office and small installations. Built with the line-interactive architecture.
• Top quality branded Green Cell UPS
• Accumulators that guarantee long backup time, high durability and safety
• Modern control software for easy, fast and intuitive operation of the unit
• Power: 600 V A (360 W)
• Topology: Line-Interactive AVR
• Battery: 1 x 12 V/7 Ah
• Battery life: 5 years
• LCD status display
• Cold start function
• USB connection port
• Accumulators that guarantee long backup time, high durability and safety
• Modern control software for easy, fast and intuitive operation of the unit
• Power: 600 V A (360 W)
• Topology: Line-Interactive AVR
• Battery: 1 x 12 V/7 Ah
• Battery life: 5 years
• LCD status display
• Cold start function
• USB connection port
The UT850EG(FR) UPS is designed to provide uninterruptible power supply for electrical equipment. It is built in line-interactive architecture.
• Automatic Voltage Regulating Output (AVR)
• 3 power outputs
• 650 VA power output
• Configurable alarm with sound when the power supply is in emergency mode
• LEDs to indicate operating status
• Overload protection
• Interference and surge protection
• Protection for telephone, fax, modem, DSL, network
• 3 power outputs
• 650 VA power output
• Configurable alarm with sound when the power supply is in emergency mode
• LEDs to indicate operating status
• Overload protection
• Interference and surge protection
• Protection for telephone, fax, modem, DSL, network
The UPS CP900EPFCLCD N9724 power supply unit is recommended for use with DVRs/NVRs, computers and other devices equipped with power supplies with active PFC function.
• Outputs with pure sine wave
• Automatic Voltage Regulation (AVR)
• 3 UPS outputs
• GreenPower UPS technology
• PowerPanel Personal Edition software
• Protection of powered devices from EMI, RFI
• USB port for communication with PC
• Automatic restart and recharging
• Multifunctional LCD display
• Automatic Voltage Regulation (AVR)
• 3 UPS outputs
• GreenPower UPS technology
• PowerPanel Personal Edition software
• Protection of powered devices from EMI, RFI
• USB port for communication with PC
• Automatic restart and recharging
• Multifunctional LCD display
The CyberPower BU650E-FR provides an uninterrupted power supply for servers, network equipment, etc. with 650 V A.
• Automatic Voltage Regulated Output (AVR)
• 3 power outputs
• 650 VA output power
• Simulated sinusoidal output voltage
• Alarm with acoustic signal when power supply operates in emergency mode
• Overload protection
• Interference and surge protection
• 3 power outputs
• 650 VA output power
• Simulated sinusoidal output voltage
• Alarm with acoustic signal when power supply operates in emergency mode
• Overload protection
• Interference and surge protection
Compact UPS 600 VA/360 W with AVR and 12 V/7 Ah battery.
• Topology: Line-Interactive, approximated sine wave
• Power: 600 VA / 360 W
• Input voltage: 140 V ... 290 V AC
• 2 CEE 7/3 (Schuko) power outputs
• Battery: 12 V / 7 Ah (replaceable)
• AVR technology - automatic voltage stabilisation
• Automatic restart after mains power is restored
• Protection: overvoltage, overload, over-discharge protection.
• Operating status indication: LEDs, acoustic signalling
• Switchover time: <10 ms
• Low noise and compact design
• Ideal for CCTV systems, computers and network equipment
• Power: 600 VA / 360 W
• Input voltage: 140 V ... 290 V AC
• 2 CEE 7/3 (Schuko) power outputs
• Battery: 12 V / 7 Ah (replaceable)
• AVR technology - automatic voltage stabilisation
• Automatic restart after mains power is restored
• Protection: overvoltage, overload, over-discharge protection.
• Operating status indication: LEDs, acoustic signalling
• Switchover time: <10 ms
• Low noise and compact design
• Ideal for CCTV systems, computers and network equipment
Compact UPS 1000 VA/600 W with AVR and 12 V/9 Ah battery.
• Topology: Line-Interactive, approximated sine wave
• Power: 1000 VA / 600 W
• Input voltage: 140 V ... 290 V AC
• 2 CEE 7/3 (Schuko) power outputs
• Battery: 12 V / 9 Ah (replaceable)
• AVR technology - automatic voltage stabilisation
• Automatic restart after mains power is restored
• Protection: overvoltage, overload, over-discharge protection.
• Operating status indication: LEDs, acoustic signalling
• Switchover time: <10 ms
• Low noise and compact design
• Ideal for CCTV systems, computers and network equipment
• Power: 1000 VA / 600 W
• Input voltage: 140 V ... 290 V AC
• 2 CEE 7/3 (Schuko) power outputs
• Battery: 12 V / 9 Ah (replaceable)
• AVR technology - automatic voltage stabilisation
• Automatic restart after mains power is restored
• Protection: overvoltage, overload, over-discharge protection.
• Operating status indication: LEDs, acoustic signalling
• Switchover time: <10 ms
• Low noise and compact design
• Ideal for CCTV systems, computers and network equipment
Compact UPS 2000 VA/1200 W with AVR and two 12 V/9 Ah batteries.
• Topology: Line-Interactive, approximated sine wave
• Power: 2000 VA / 1200 W
• Input voltage: 140 V ... 290 V AC
• 4 CEE 7/3 (Schuko) power outlets
• Battery: 2 x 12 V / 9 Ah (interchangeable)
• AVR technology - automatic voltage stabilisation
• Automatic restart after mains power is restored
• Protection: overvoltage, overload, over-discharge protection.
• Operating status indication: LEDs, acoustic signalling
• Switchover time: <10 ms
• Low noise and compact design
• USB communication port
• Ideal for CCTV systems, computers and network devices
• Power: 2000 VA / 1200 W
• Input voltage: 140 V ... 290 V AC
• 4 CEE 7/3 (Schuko) power outlets
• Battery: 2 x 12 V / 9 Ah (interchangeable)
• AVR technology - automatic voltage stabilisation
• Automatic restart after mains power is restored
• Protection: overvoltage, overload, over-discharge protection.
• Operating status indication: LEDs, acoustic signalling
• Switchover time: <10 ms
• Low noise and compact design
• USB communication port
• Ideal for CCTV systems, computers and network devices
Compact UPS 3000 VA/1800 W with AVR and four 12 V/9 Ah batteries.
• Topology: Line-Interactive, approximated sine wave
• Power: 3000 VA / 1800 W
• Input voltage: 140 V ... 290 V AC
• 4 CEE 7/3 (Schuko) power outlets
• Battery: 4 x 12 V / 9 Ah (interchangeable)
• AVR technology - automatic voltage stabilisation
• Automatic restart after mains power is restored
• Protection: overvoltage, overload, over-discharge protection.
• Operating status indication: LEDs, acoustic signalling
• Switchover time: <10 ms
• Low noise and compact design
• USB communication port
• Ideal for CCTV systems, computers and network devices
• Power: 3000 VA / 1800 W
• Input voltage: 140 V ... 290 V AC
• 4 CEE 7/3 (Schuko) power outlets
• Battery: 4 x 12 V / 9 Ah (interchangeable)
• AVR technology - automatic voltage stabilisation
• Automatic restart after mains power is restored
• Protection: overvoltage, overload, over-discharge protection.
• Operating status indication: LEDs, acoustic signalling
• Switchover time: <10 ms
• Low noise and compact design
• USB communication port
• Ideal for CCTV systems, computers and network devices
The MikroTik RB260GS 5-port gigabit switch is equipped with an SFP port. The device runs on MikroTik's SwOS operating system.
• Number of Ethernet ports: 5 (5xGE)
• Number of SFP ports: 1x1000 Mbps
• WiFi: none
• Operating system: Mikrotik
• Device type: Switch
• Number of SFP ports: 1x1000 Mbps
• WiFi: none
• Operating system: Mikrotik
• Device type: Switch
Desktop switch for smooth network transmission. It enables connections at a speed of 10/100/1000 Mbps.
• Number of 10/100 Mbps Ethernet ports: 0
• Number of 10/100/1000 Mbps Ethernet ports: 5
• SFP port count: 0
• Number of 10/100/1000 Mbps Ethernet ports: 5
• SFP port count: 0
Desktop switch for smooth network transmission. It enables connections at a speed of 10/100/1000 Mbps.
• Number of 10/100 Mbps Ethernet ports: 0
• Number of 10/100/1000 Mbps Ethernet ports: 8
• SFP port count: 0
• Number of 10/100/1000 Mbps Ethernet ports: 8
• SFP port count: 0
ULTIPOWER PoE switches are industrial type devices. They are designed for installations where there is increased dust, high or low temperatures.
• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Total of five 10/100 Mbps ports
• Four PoE 802.3af/at ports
• Two SFP 100 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30...65℃
• Operating humidity range: 5%...95%
• Functions: Extend, VLAN, PoE Auto Check
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Total of five 10/100 Mbps ports
• Four PoE 802.3af/at ports
• Two SFP 100 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30...65℃
• Operating humidity range: 5%...95%
• Functions: Extend, VLAN, PoE Auto Check
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device enabling smooth data transmission in 10/100/1000 Mbps Ethernet networks.
• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Ethernet ports: 8x FastEthernet 10/100 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s
• PoE ports: 6x 802.3at/af + 2x 802.3at/af HiPoE 90W
• Two SFP 1000 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30℃...65℃
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Ethernet ports: 8x FastEthernet 10/100 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s
• PoE ports: 6x 802.3at/af + 2x 802.3at/af HiPoE 90W
• Two SFP 1000 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30℃...65℃
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial type device. It is designed for installations where there is increased dust, high or low temperatures.
• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Power consumption without PoE load: <5 W
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s (PD port)
• PoE ports: 4 802.3af/at
• Fibre optic transmission: 2x SFP 1000 Mbps
• ESD protection: 6 kV
• Operating temperature range: -30°C...65°C
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
• Power supply option via UTP/FTP cable through the PD port (max. 60 W)
• Input supply voltage: 48-57 VDC
• Power consumption without PoE load: <5 W
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s (PD port)
• PoE ports: 4 802.3af/at
• Fibre optic transmission: 2x SFP 1000 Mbps
• ESD protection: 6 kV
• Operating temperature range: -30°C...65°C
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
• Power supply option via UTP/FTP cable through the PD port (max. 60 W)
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: without PoE load: <5 W
• Ethernet ports: 1x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 1
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: without PoE load: <5 W
• Ethernet ports: 1x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 1
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres with high or low temperatures.
• Protection degree: IP40
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: without PoE load: <5 W
• Ethernet ports: 2x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 2
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against ESD: 6 kV
• Operating temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: without PoE load: <5 W
• Ethernet ports: 2x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 2
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against ESD: 6 kV
• Operating temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial type device. It is designed for installations where there is increased dust, high or low temperatures.
• Protection degree: IP40
• Power supply: PoE 802.3at (1 port)
• Energy consumption: <5 W (without PoE)
• Ethernet ports: 2x GigabitEthernet 10/100/1000 Mbps
• PoE ports: PD port: 802.3at, PoE 802.3af/at
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -40...75℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Power supply: PoE 802.3at (1 port)
• Energy consumption: <5 W (without PoE)
• Ethernet ports: 2x GigabitEthernet 10/100/1000 Mbps
• PoE ports: PD port: 802.3at, PoE 802.3af/at
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -40...75℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
Industrial PoE Switch: PoE ULTIPOWER 341SFP 4xGE(2x PoE 802.3bt/at/af 90W, 2x PoE 802.3af/at), 1xSFP
The ULTIPOWER PoE switch is an industrial type device. It is designed for installations where there is increased dust, high or low temperatures.
• Protection degree: IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: < 5 W (without PoE)
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4: 2x 802.3af/at, 2x 802.3bt/at/af
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -30...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: < 5 W (without PoE)
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4: 2x 802.3af/at, 2x 802.3bt/at/af
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -30...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40
• Power supply: 48...57 VDC
• Power consumption: < 5 W (without PoE)
• Ethernet ports: 5x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4: 4 802.3af/at
• Protected against ESD: 6 kV
• Operating ambient temperature range: -30...65°C
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Power supply: 48...57 VDC
• Power consumption: < 5 W (without PoE)
• Ethernet ports: 5x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4: 4 802.3af/at
• Protected against ESD: 6 kV
• Operating ambient temperature range: -30...65°C
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40 ingress protection level
• Input supply voltage: 12-60 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: < 5 W (without PoE)
• Ethernet ports: 8x Fast Ethernet 10/100 Mbps
• Protection against ESD: 6 kV
• Operating temperature range: -35...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 12-60 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: < 5 W (without PoE)
• Ethernet ports: 8x Fast Ethernet 10/100 Mbps
• Protection against ESD: 6 kV
• Operating temperature range: -35...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial type device. It is designed for installations where there is increased dust, high or low temperatures.
• Protection degree: IP40 ingress protection level
• Input supply voltage: 12-60 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <5 W
• Ethernet ports: 5x GigabitEthernet 10/100/1000 Mbps
• Protection against ESD: 6 kV
• Operating temperature range: -30...65°C
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 12-60 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <5 W
• Ethernet ports: 5x GigabitEthernet 10/100/1000 Mbps
• Protection against ESD: 6 kV
• Operating temperature range: -30...65°C
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switches are industrial devices. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40
• Managed switch
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <20 W (without PoE)
• Ethernet ports: 12x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 12
• Fiber optic transmission: 4x SFP 1000 Mbps
• Protection against electrostatic discharge: 8 kV
• Operating ambient temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Managed switch
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <20 W (without PoE)
• Ethernet ports: 12x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 12
• Fiber optic transmission: 4x SFP 1000 Mbps
• Protection against electrostatic discharge: 8 kV
• Operating ambient temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
ULTIPOWER PoE Switches are industrial-type devices. It is designed for installations where there is increased dust, high or low temperatures.
• Protection degree: IP40
• Managed switch
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <20 W (without PoE)
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against electrostatic discharge: 8 kV
• Operating ambient temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Managed switch
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <20 W (without PoE)
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against electrostatic discharge: 8 kV
• Operating ambient temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af/at standard and supplies them with power.
• Small switch with PoE function
• Six 10/100 Mbps ports
• Four PoE IEEE802.3af/at ports
• Single PoE port transfers up to 30 W
• Maximum total power of powered devices 65 W
• Supports MAC address auto-learning and auto-aging (1K array size)
• LEDs indicating connection status, speed, activity and power supply
• Extended function for powering twisted-pair devices up to 250 m
• Six 10/100 Mbps ports
• Four PoE IEEE802.3af/at ports
• Single PoE port transfers up to 30 W
• Maximum total power of powered devices 65 W
• Supports MAC address auto-learning and auto-aging (1K array size)
• LEDs indicating connection status, speed, activity and power supply
• Extended function for powering twisted-pair devices up to 250 m
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af/at standard and supplies them with power.
• 6 x RJ45 10/100 Mb/s ports (4 x PoE included)
• Up to 30 W PoE power supply through 1 port
• Power supply in compliance to IEEE802.3af/at
• Max total load: 65 W
• Up to 30 W PoE power supply through 1 port
• Power supply in compliance to IEEE802.3af/at
• Max total load: 65 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af standard and supplies them with power.
• 5 RJ-45 10/100 Mbps ports including 4x PoE
• PoE power supply of up to 15 W per PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 62 W
• PoE power supply of up to 15 W per PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 62 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af standard and supplies them with power.
• Nine 10/100 Mbps RJ-45 ports including 4 x PoE
• PoE power supply up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 62 W
• PoE power supply up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 62 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af standard and supplies them with power.
• 9 RJ-45 10/100 Mbps ports
• 8 ports with PoE function
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 124 W
• 8 ports with PoE function
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 124 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af standard and supplies them with power.
• 8 RJ-45 10/100 Mbps ports including 8x PoE
• 2 RJ-45 10/100/1000 Mbps ports
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 124 W
• 2 RJ-45 10/100/1000 Mbps ports
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 124 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af/at standard and supplies them with power.
• 4 RJ-45 10/100 Mbps ports including 4x PoE
• 1 RJ-45 10/100/1000 Mbps port
• 1 SFP port
• PoE power supply of up to 30 W for each PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 65 W
• 1 RJ-45 10/100/1000 Mbps port
• 1 SFP port
• PoE power supply of up to 30 W for each PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 65 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af/at standard and supplies them with power.
• 10 RJ-45 10/100 Mbps ports including 8x PoE
• PoE power supply of up to 30 W per PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 110 W
• PoE power supply of up to 30 W per PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 110 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af/at standard and supplies them with power.
• 8 RJ-45 10/100 Mbps ports including 8x PoE
• 2 RJ-45 10/100/1000 Mbps ports
• PoE power supply of up to 30 W for each PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 120 W
• 2 RJ-45 10/100/1000 Mbps ports
• PoE power supply of up to 30 W for each PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 120 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating in 802.3af and supplies them with power.
• 16 RJ-45 10/100 Mbps ports including 16x PoE
• 2 RJ-45 10/100/1000 Mbps ports
• 2 SFP ports
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 250 W
• 2 RJ-45 10/100/1000 Mbps ports
• 2 SFP ports
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 250 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating in 802.3af and supplies them with power.
• 24 RJ-45 10/100 Mbps ports including 24x PoE
• 2 RJ-45 10/100/1000 Mbps ports
• 2 SFP ports
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 370 W
• 2 RJ-45 10/100/1000 Mbps ports
• 2 SFP ports
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 370 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under 802.3at and supplies them with power.
• 5 RJ-45 10/100 Mbps ports including 4x PoE
• PoE power supply of up to 30 W per PoE port
• Power supply compliant with IEEE802.3at standard
• Power budget: 120 W
• PoE power supply of up to 30 W per PoE port
• Power supply compliant with IEEE802.3at standard
• Power budget: 120 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af standard and supplies them with power.
• Eight 10/100/1000 Mbps PoE ports including 8x PoE
• PoE power supply up to 30 W per each PoE port
• Power supply compliant with IEEE802.3at
• Power budget: 125 W
• PoE power supply up to 30 W per each PoE port
• Power supply compliant with IEEE802.3at
• Power budget: 125 W
The ULTIPOWER PoE switches are industrial devices. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Power supply: 100...240 V AC
• Energy consumption: < 15 W (without PoE)
• Ethernet ports: 8x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 8 (6x 802.3af/at, 2x 802.3af/at/bt)
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -10...50℃
• Permissible ambient humidity: 5...95%
• Energy consumption: < 15 W (without PoE)
• Ethernet ports: 8x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 8 (6x 802.3af/at, 2x 802.3af/at/bt)
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -10...50℃
• Permissible ambient humidity: 5...95%
![Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [100 m]](https://www.dipolnet.com/img/thumbnails/e1005_100+.jpg/3485ddf65185708132bcd177ab8bdd94.jpg)
TRISET 302 Eca Tri-shield type in PVC jacket intended for the construction of TV/SAT systems. Fire reaction class in accordance with CPR - Eca.
• Conforms to class A+ standard
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [250 m]](https://www.dipolnet.com/img/thumbnails/e1005_250+.jpg/f551947d3c11807563d82b17a636d7cd.jpg)
TRISET 302 Eca Tri-shield type made in PVC jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Eca.
• Conforms to class A+ standard
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipolnet.com/img/thumbnails/e1005_500+.jpg/2c64860f51cff4dcded36ce1f3dbeaeb.jpg)
TRISET 302 Eca Tri-shield type made in PVC jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Eca.
• Compliant with class A+ standard
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Dca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipolnet.com/img/thumbnails/e1006_500+.jpg/e99b5303bd58db2e71d6f663ec303518.jpg)
TRISET 302 Dca, Tri-shield type, made with LSZH jacket, intended for the construction of RTV/SAT installations. Reaction to fire class according to CPR - Dca-s2, d1, a1.
• Compliant with the class A+ standard
• Flammability class Dca-s2, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Dca-s2, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 B2ca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipolnet.com/img/thumbnails/e1007_500+.jpg/dbcf7cbabe1881edb010590046b3e334.jpg)
TRISET 302 B2ca, Tri-shield type, made with LSZH jacket, intended for the construction of RTV/SAT installations. Reaction to fire class according to CPR - B2ca-s1a, d1, a1.
• Compliant with the class A+ standard
• Flammability class B2ca-s1a, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class B2ca-s1a, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Fca class A+ 1.02/4.6/7.0 110 dB [100 m]](https://www.dipolnet.com/img/thumbnails/e1008_100+.jpg/b86956f9c39f6480aa44d79932f2a4a2.jpg)
TRISET 302 Fca Tri-shield type, external made in PE jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant with class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Fca class A+ 1.02/4.6/7.0 110 dB [250 m]](https://www.dipolnet.com/img/thumbnails/e1008_250+.jpg/753ed42ed78da9dd670a0377e49b1f70.jpg)
TRISET 302 Fca Tri-shield type, external made in PE jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant with class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Fca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipolnet.com/img/thumbnails/e1008_500+.jpg/8bce782df80cc7d49b4dcb3f97ca1df6.jpg)
TRISET 302 Fca Tri-shield type, external made in PE casing intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant to class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PE sheath
• Outdoor cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A+++
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PE sheath
• Outdoor cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A+++
• Min. 77% braid coverage
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [1 m]](https://www.dipolnet.com/img/thumbnails/e1015+++.jpg/0d08ac94851f35a0e1e5b02f5f7afe44.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1.13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• Sold per meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1.13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• Sold per meters
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 [100 m]](https://www.dipol.com.pl/img/thumbnails/e1015_100+.jpg/2e94b5d9ca3b921cde798644fb9d48d5.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1.13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 100 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1.13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 100 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [200 m]](https://www.dipolnet.com/img/thumbnails/e1015_200+.jpg/7d2b29aae19d7398dd79d3c23fff19fe.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 200 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 200 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1015_500+.jpg/5cbcfe3443448c1c49311d7f0f0c1713.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 500 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 500 meters
![Coaxial cable (75 ohm, class A+): TRISET PLUS Dca LSZH<br>1,13/4,8/6,8 110 dB [100 m]](https://www.dipolnet.ro/img/thumbnails/e1016_100+.jpg/2eedcd00a5cb9c30d78c338d11e8dae0.jpg)
High quality TRISET PLUS coaxial cable is dedicated for individual and community antenna systems. Complies with A+ class requirements.
• Complies with A+ class requirements
• Reaction to fire class compliant with CPR - Dca-s2, d1, a1
• Triple shield Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath
• Passed IEC 68-2-3 Steady State Damp Heat test
• 1.13 mm copper core
• Low loss
• Excellent impedance matching
• High screening efficiency - meeting the class A++ requirements in most of the range
• 81% braid coverage
• 5-year warranty
• Reaction to fire class compliant with CPR - Dca-s2, d1, a1
• Triple shield Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath
• Passed IEC 68-2-3 Steady State Damp Heat test
• 1.13 mm copper core
• Low loss
• Excellent impedance matching
• High screening efficiency - meeting the class A++ requirements in most of the range
• 81% braid coverage
• 5-year warranty
![Coaxial cable (75 ohm, class A+): TRISET PLUS Dca LSZH<br>1,13/4,8/6,8 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1016_500+.jpg/99096c8956274c118003137e395dd9ab.jpg)
High quality TRISET PLUS coaxial cable is dedicated for individual and community antenna systems. Complies with A+ class requirements.
• Conforms to Class A+ standard
• Reaction to fire class in accordance with CPR - Dca-s2, d1, a1
• Made in LSZH jacket (LS0H) - halogen-free insulation
• Triple screen - first Al/PET/SY foil bonded to dielectric + 81% braid + second Al/PET foil bonded to jacket
• Conforms to IEC68-2 part 3 accelerated ageing standard
• Copper core 1.13 mm
• Low attenuation
• Excellent fit
• High screening efficiency - fulfils class A+++ requirement in most of the range
• 81% braid coverage
• 5 year warranty
• Reaction to fire class in accordance with CPR - Dca-s2, d1, a1
• Made in LSZH jacket (LS0H) - halogen-free insulation
• Triple screen - first Al/PET/SY foil bonded to dielectric + 81% braid + second Al/PET foil bonded to jacket
• Conforms to IEC68-2 part 3 accelerated ageing standard
• Copper core 1.13 mm
• Low attenuation
• Excellent fit
• High screening efficiency - fulfils class A+++ requirement in most of the range
• 81% braid coverage
• 5 year warranty
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1 m]](https://www.dipol.com.pl/img/thumbnails/e1017+++++.jpg/782994682fbddbafd1bb9347813dd94e.jpg)
High-quality TV/satellite coax (A-class, 16.65 dB/100 m at 860 MHz) in PE sheath, gel-filled. For outdoor applications.
• Suitable for all types of installations - especially for terrestrial and satellite TV networks
• PE-coated outer cable
• Resistant to UV radiation
• Gel to hinder the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1,13 mm
• 81% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• Sale by the metre
• PE-coated outer cable
• Resistant to UV radiation
• Gel to hinder the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1,13 mm
• 81% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• Sale by the metre
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [100 m]](https://www.dipol.com.pl/img/thumbnails/e1017_100+.jpg/c61841699c220bcc8e47b237c6988d24.jpg)
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 100 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 100 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [200 m]](https://www.dipol.com.pl/img/thumbnails/e1017_200+.jpg/c9c81b6521075a285f88726b86d7ebb1.jpg)
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 200 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 200 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1017_500+.jpg/be4b32041c6ba5e4995497236dd2560c.jpg)
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 500 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 500 meters
![Coaxial Cable (75 ohm, class A++): TRISET B2CA 120 dB 1.05/4.6/6.9 [1 m]](https://www.ostelsat.hu/img/thumbnails/e1020_1+.jpg/fd33a05505d1af3532b6403cb0144100.jpg)
TRISET B2CA is suitable for MATV/SMATV antenna systems in public buildings. Reaction to fire class acc. to CPR - B2ca-s1a,d1,a1.
• Compliant with class A+++ standard
• Braided 82% tinned copper
• 10 dB higher interference suppression compared to class A+
• Tin-plated copper braid resistant to oxidation
• Copper core 1.05 mm
• Low attenuation
• High screening efficiency
• 82% braid coverage
• 10-year warranty
• LSOH-coated cable
• CPR-compliant reaction to fire class - B2ca-s1a,d1,a1
• Braided 82% tinned copper
• 10 dB higher interference suppression compared to class A+
• Tin-plated copper braid resistant to oxidation
• Copper core 1.05 mm
• Low attenuation
• High screening efficiency
• 82% braid coverage
• 10-year warranty
• LSOH-coated cable
• CPR-compliant reaction to fire class - B2ca-s1a,d1,a1
![TRISET B2CA LSZH 75 ohm coaxial cable class A++ 1.05/4.6/6.9 120 dB [500 m].](https://www.dipol.com.pl/img/thumbnails/e1020_500+.jpg/783223e5fce8cf9a0a929918207856a6.jpg)
TRISET B2CA is suitable for MATV/SMATV antenna systems in public buildings. Reaction to fire class acc. to CPR - B2ca-s1a,d1,a1.
• Complies with Class A++ standard
• Braid coverage 82% - tinned copper
• Interference attenuation 10 dB higher than Class A+
• Copper tinned braid resistant to oxidation
• Complies with requirements of MTBiGM regulation
• Copper core 1,05 mm
• Low attenuation
• High shielding effectiveness
• 82% braid coverage
• 10 year warranty
• SoH coated cable
• Fire response class in accordance with CPR - B2ca-s1a,d1,a1
• Braid coverage 82% - tinned copper
• Interference attenuation 10 dB higher than Class A+
• Copper tinned braid resistant to oxidation
• Complies with requirements of MTBiGM regulation
• Copper core 1,05 mm
• Low attenuation
• High shielding effectiveness
• 82% braid coverage
• 10 year warranty
• SoH coated cable
• Fire response class in accordance with CPR - B2ca-s1a,d1,a1
![Coaxial Cable (75 ohm): Triset-11 PE 1.63/7.2/10.2, 100 dB (Fca, class A, gel-filled) [100 m]](https://www.dipol.com.pl/img/thumbnails/e1025_100+.jpg/5529721acf4446b7459fa06d9274e37c.jpg)
TRISET-11 PE (outdoor) double-shielded coaxial cable type RG11 with the internal conductor made of copper wire with a diameter 1.65 mm.
• Bus cable
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 100 metres
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 100 metres
![Coaxial Cable (75 ohm): Triset-11 PE 1.65/7.2/10, 100 dB (Fca, class A, gel-filled) [300 m]](https://www.dipol.com.pl/img/thumbnails/e1025_300+.jpg/88c4672880815cdc20e35a3da5c0543a.jpg)
TRISET-11 PE (outdoor) double-shielded coaxial cable type RG11 with the internal conductor made of copper wire with a diameter 1.65 mm.
• Bus cable
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 300 metres
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 300 metres
![Coaxial Cable (75 ohm): TRISET-11 HF 1.65/7.2/10 [200 m] (class A+, halogen-free)](https://www.dipol.es/img/thumbnails/e1027_200+.jpg/94ffd0895050e944df71237466f764eb.jpg)
RG-11/TRISET-11 HF (halogen-free insulation) designed for the construction of RTV/SAT installations. It does not spread flame, smoke emission is very low and emitted gases are not corrosive.
• Bus cable
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath.
• CPR class: Cca
• 200 metres
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath.
• CPR class: Cca
• 200 metres
![Coaxial Cable (75 ohm, class A): TRISET-11 Cca LSZH 1.63/7.2/10.2 100 dB [300 m]](https://www.dipol.es/img/thumbnails/e1027_300+.jpg/93c52370aa00b0dab11bf791e03341b8.jpg)
TRISET-11 HF (halogen-free insulation) dedicated to SMATV systems. It does not spread flame, smoke emission is very low and the released gases are not corrosive.
• Bus cable
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Cca
• 300 metres
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Cca
• 300 metres
NETSET U/UTP Category 5e twisted pair cable is the top quality twisted pair designed for professional indoor systems.
• Type of cable: U/UTP
• Category 5e
• Flammability class: B2ca
• Application: indoor
• PVC coating
• Wire diameter 0.49 mm (24 AWG)
• Carton 305 m
• Category 5e
• Flammability class: B2ca
• Application: indoor
• PVC coating
• Wire diameter 0.49 mm (24 AWG)
• Carton 305 m
![CAT 5e UTP Cable: NETSET U/UTP 5e [1 m], indoor](https://www.dipolnet.com/img/thumbnails/e1408_1+.jpg/a630cf52df7a992e9e56e9545070da55.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 5e
• Application: indoor
• PVC sheath
• Conductor diameter 0.5 mm (24 AWG)
• Cable sold by metre
• Category 5e
• Application: indoor
• PVC sheath
• Conductor diameter 0.5 mm (24 AWG)
• Cable sold by metre
![CAT 5e UTP Cable: NETSET BOX U/UTP 5e [305 m], indoor](https://www.dipolnet.cz/img/thumbnails/e1408_305+.jpg/188e1484f397d90baef9c211d5b16e6f.jpg)
The NETSET BOX U/UTP CAT 5e cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).
• Cable type: U/UTP
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![Cat 5 UTP Cable: NETSET BOX U/UTP 5e (indoor) [500 m]](https://www.dipol.com.pl/img/thumbnails/e1408_500+.jpg/ac61ede939e81b2f87ddd78f10793c3f.jpg)
The NETSET BOX U/UTP CAT 5e cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).
• Cat 5e cable for indoor applications
• Parameters far exceeding the requirements for Category 5+ twisted pair cables
• Solid wires of 0.50 mm diameter (24 AWG)
• High quality confirmed by tests conducted by National Institute of Telecommunications in Warsaw, Poland
• Parameters far exceeding the requirements for Category 5+ twisted pair cables
• Solid wires of 0.50 mm diameter (24 AWG)
• High quality confirmed by tests conducted by National Institute of Telecommunications in Warsaw, Poland
![Twisted-pair cable: NETSET Lite U/UTP 5e [305 m], Cu, 0.45 mm](https://www.dipol.com.pl/img/thumbnails/e1409_305+++.jpg/51f1525c68566f19e91c8bac34aa0d83.jpg)
The NETSET Lite U/UTP Category 5e twisted pair cable is dedicated for building simple network systems.
• Cable type: U/UTP
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.45 mm
• Core material: copper
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.45 mm
• Core material: copper
![Cat. 5e UTP Cable: NETSET U/UTP 5e <br>(outdoor - gel-filled, black) [1 m]](https://www.dipolnet.com/img/thumbnails/e1410_1+.jpg/a4a81cb97d9b1d5e5946fd9b4574e645.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 5e
• Application: outdoor, gel-filled
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
• Category 5e
• Application: outdoor, gel-filled
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
![CAT 5e UTP Cable: NETSET BOX U/UTP 5e <br>(outdoor - gel-filled, black) [305 m]](https://www.dipolnet.cz/img/thumbnails/e1410_305+.jpg/275219395bf9beba159cefa36587df33.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP, gel-filled
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![Cat. 5e UTP Cable: NETSET U/UTP PE (outdoor) [1 m]](https://www.dipolnet.com/img/thumbnails/e1412_1+.jpg/5d0f0016367a10aea3405e28c052ce9a.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
![NETSET BOX U/UTP PE 5e black cable, outdoor twisted pair, flammability class Fca [305 m]](https://www.dipol.com.pl/img/thumbnails/e1412_305+.jpg/d3aa6bfff64795aad29b313689bcbf7c.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![CAT 5e UTP Cable: NETSET BOX U/UTP 5e [305 m] (indoor, Dca-s1,d2,a1)](https://www.dipolnet.cz/img/thumbnails/e1414_305+.jpg/4d076eb9744a66af90621126e87e298f.jpg)
NETSET U/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 5e
• Application: indoor
• LSZH sheath
• Flammability class Dca-s1,d2,a1
• Conductor diameter 0.49 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: indoor
• LSZH sheath
• Flammability class Dca-s1,d2,a1
• Conductor diameter 0.49 mm (24 AWG)
• Carton 305 m
![NETSET U/FTP 5e shielded twisted-pair cable, indoor use [1 m]](https://www.dipolnet.ro/img/thumbnails/e1515_1+.jpg/52a026ed24d4b3e3ecf959462a2b40e4.jpg)
The NETSET F/UTP CAT 5e is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: F/UTP
• Category 5e
• Applications: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Sold by the meter
• Category 5e
• Applications: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Sold by the meter
![CAT 5e FTP Shielded Cable: NETSET BOX F/UTP 5e [305 m], indoor](https://www.dipolnet.ro/img/thumbnails/e1515_305+.jpg/38b1eca8e5019a9912871f4792ea3eb6.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair cable designed for professional installations inside buildings.
• Cable type: F/UTP
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![Cat. 5e Shielded Cable: NETSET BOX F/UTP 5e [1 m], outdoor](https://www.dipolnet.cz/img/thumbnails/e1517_305+++.jpg/1aa3e823056582cd075b41a79e0c0c9e.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
![Cat. 5e Shielded Cable: NETSET BOX F/UTP 5e [305 m], outdoor](https://www.dipolnet.cz/img/thumbnails/e1517_305+.jpg/37e76cbe392c50176ed00ff2a4cf3aed.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![Cat. 5e Shielded Cable: NETSET F/UTP 5e [1 m] (PE, outdoor, with messenger wire)](https://www.dipolnet.cz/img/thumbnails/e1519_500+++.jpg/05dca64684c703a8274f325fedb068fa.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP with carrier wire
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.51 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.51 mm (24 AWG)
• Carton 305 m
![Cat. 5e shielded Cable: NETSET F/UTP 5e [500 m] (PE, outdoor, with messenger wire)](https://www.dipolnet.cz/img/thumbnails/e1519_500+.jpg/c005d32963d41cc29dd07c0696405e51.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP with carrier wire
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.51 mm (24 AWG)
• Spool 500 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.51 mm (24 AWG)
• Spool 500 m
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• Carton 305 m
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• Carton 305 m
![Cat. 6 Cable: NETSET BOX U/UTP 6 (indoor) [1 m]](https://www.dipolnet.cz/img/thumbnails/e1608_305+++.jpg/df36ca01f208b728c876d1154dcafe64.jpg)
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Conductor diameter 0.54 mm (23 AWG)
• Cable sold by the metre
• Category 6
• Application: indoor
• PVC sheath
• Conductor diameter 0.54 mm (23 AWG)
• Cable sold by the metre
![Cat. 6 UTP Cable: NETSET BOX U/UTP 6 (indoor) [305 m]](https://www.dipolnet.cz/img/thumbnails/e1608_305+.jpg/d1a0d00fd9618ca3e12077288aa2d562.jpg)
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• Carton 305 m
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• Carton 305 m
![NETSET BOX U/UTP cat. 6 indoor twisted pair cable [500 m]](https://www.dipolnet.cz/img/thumbnails/e1608_500+.jpg/0191b99ee18f6499036eb5832bf992d2.jpg)
NETSET U/UTP Category 6 twisted pair cable is the top quality twisted pair designed for professional indoor systems.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• 500 m drum
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• 500 m drum
![NETSET U/UTP PE category 6 black cable, outdoor twisted pair, flammability class Fca [1 m]](https://www.dipolnet.cz/img/thumbnails/e1610_305+.jpg/9596ddb9259eead966140be128aa123f.jpg)
NETSET U/UTP category 6 twisted pair cable is the highest quality twisted pair cable designed for professional outdoor installations.
• Cable type: U/UTP
• Category 6
• Application: outdoor
• LDPE sheath
• Core diameter 0.54 mm (23 AWG)
• Category 6
• Application: outdoor
• LDPE sheath
• Core diameter 0.54 mm (23 AWG)
![Cat. 6 UTP Cable: NETSET BOX U/UTP PE (outdoor) [305 m]](https://www.dipolnet.cz/img/thumbnails/e1610_305+++.jpg/462a3bd430375fca07c11dc68d1359d2.jpg)
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair cable designed for professional outdoor installations.
• Cable type: U/UTP
• Category 6
• Application: outdoor
• LDPE sheath
• Core diameter 0.54 mm (23 AWG)
• Box 305 m
• Category 6
• Application: outdoor
• LDPE sheath
• Core diameter 0.54 mm (23 AWG)
• Box 305 m
NETSET U/UTP category 6 gel-filled twisted pair is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
NETSET U/UTP category 6 gel-filled twisted pair is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
![Cat. 6 UTP Cable: NETSET F/UTP LSZH Dca s2 d2 a1 [500 m]](https://www.dipolnet.cz/img/thumbnails/e1612_500+.jpg/c4ffafed0bf27b8f5a4f11a67beaa7b1.jpg)
The NETSET F/UTP CAT 6 is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: F/UTP
• Category 6
• Applications: indoors
• LSZH sheath
• Reaction to fire: Dca-s2,d2,a1
• Conductor diameter 0.51 mm (24 AWG)
• 500 m spool
• Category 6
• Applications: indoors
• LSZH sheath
• Reaction to fire: Dca-s2,d2,a1
• Conductor diameter 0.51 mm (24 AWG)
• 500 m spool
NETSET F/UTP category 6 gel-filled twisted pair is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
NETSET F/UTP category 6 gel-filled twisted pair is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
![Cat. 6 UTP Cable: NETSET BOX U/UTP CAT 6 [305 m] (indoor, Dca-s2,d2,a1)](https://www.dipolnet.cz/img/thumbnails/e1614_305+.jpg/4aae5c80332300ae7bcfd56aabe1c59c.jpg)
The NETSET cable comes from the latest generation of UTP twisted pair cables. Its external diameter has been reduced to 5.9 mm, which considerably facilitates insertion of the cable into ducts and pipes. Special insulation material makes it easier to attach RJ-45 connectors.
• Cable type: U/UTP
• Category 6
• Application: indoor
• LSZH sheath
• Flammability class Dca-s2,d2,a1
• Conductor diameter 0,54 mm (24 AWG)
• Carton 305 m
• Category 6
• Application: indoor
• LSZH sheath
• Flammability class Dca-s2,d2,a1
• Conductor diameter 0,54 mm (24 AWG)
• Carton 305 m
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 6
• Uses: indoors
• LSZH sheath
• Fire class B2ca-s1a-d1-a1
• Conductor diameter 0.55 mm (24 AWG)
• Category 6
• Uses: indoors
• LSZH sheath
• Fire class B2ca-s1a-d1-a1
• Conductor diameter 0.55 mm (24 AWG)
NETSET U/FTP Category 6A twisted pair cable is the highest quality twisted pair cable designed for professional indoor installations.
• Cable type: U/FTP
• Category 6A
• Application: interior
• Flammability class B2ca s1a,d1,a1
• Conductor diameter 0.57 mm (23 AWG)
• Roll of 500 m
• Category 6A
• Application: interior
• Flammability class B2ca s1a,d1,a1
• Conductor diameter 0.57 mm (23 AWG)
• Roll of 500 m
The NETSET U/UTP cat. 6A is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: U/UTP
• Category 6A
• Uses: indoors
• Fire class B2ca s1a, d1, a1
• Conductor diameter 0.565 mm
• 500-metre reel
• Category 6A
• Uses: indoors
• Fire class B2ca s1a, d1, a1
• Conductor diameter 0.565 mm
• 500-metre reel
![Cat. 7 S/FTP Shielded Cable: NETSET BOX S/FTP CAT 7 [500 m] (indoor, Cca s1a d1 a1)](https://www.dipolnet.cz/img/thumbnails/e1626_500+.jpg/a28d2045190b2c3ef5e50643e9693a48.jpg)
NETSET S/FTP category 7 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: S/FTP
• Category 7
• Application: indoor
• LSZH sheath
• Conductor diameter 0,56 mm
• Roll of 500 m
• Category 7
• Application: indoor
• LSZH sheath
• Conductor diameter 0,56 mm
• Roll of 500 m
![CCTV Cable: CAMSET/YAR 75-0.59/3.7+2*0.50 (2 power wires up to 230 VAC) [100 m]](https://www.dipolnet.com/img/thumbnails/m5995_100+.jpg/ca3e147173863fc35b13aa7ca0dcdc04.jpg)
CAMSET/YAR M5995 is a high quality CCTV cable used for transmitting baseband video and supplying power to cameras or other CCTV devices. Its copper conductors ensure low resistance and attenuation.
• Version of RG-59 cable for CCTV systems
• Dedicated for indoor applications
• Two power wires up to 230 VAC
• Copper core and braid of the coaxial cable
• Thorough tests of the final product
• 6-year quality guarantee
• Meter marking
• Dedicated for indoor applications
• Two power wires up to 230 VAC
• Copper core and braid of the coaxial cable
• Thorough tests of the final product
• 6-year quality guarantee
• Meter marking
Allows ATTE modules and extenders to be mounted on a standard TH35 DIN rail.
• Allows ATTE modules and extenders to be mounted on a standard DIN rail
Mounting and connection box designed for Sunell cameras. Allows the camera to be mounted, hiding connection cables and additional accessories.
• Mounting and connection box for Sunell cameras
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
Mounting and connection box designed for Sunell cameras. Allows the camera to be mounted, hiding connection cables and additional accessories.
• Mounting and connection box for Sunell cameras
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
Mounting and connection box designed for Sunell cameras. Allows the camera to be mounted, hiding connection cables and additional accessories.
• Mounting and connection box for Sunell cameras
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
Mounting and connection box designed for Sunell cameras. Allows the camera to be mounted, hiding connection cables and additional accessories.
• Mounting and connection box for Sunell cameras
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
Mounting and connection box designed for Sunell cameras. Allows the camera to be mounted, hiding connection cables and additional accessories.
• Mounting and connection box for Sunell cameras
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
• Mounting: wall, ceiling (flat surface)
• Capacity: 3 kg
• Protection degree: IP66
Mount with a pole adapter, designed for mounting cameras on a pole with a diameter of 130-152 mm.
• Load capacity: 4 kg
• Pole diameter: 80-150 mm
• Material of construction: steel and aluminium
• Pole diameter: 80-150 mm
• Material of construction: steel and aluminium
The DS-1661ZJ bracket is designed for HIKVISION cameras. It is made of aluminum alloy and is used for mounting of PTZ cameras on the ceiling.
• Color: white
• Ceiling mount
• Made of aluminum alloy
• Application: indoor and outdoor
• Compatibility: Hikvision PTZ cameras (except DS-2AE-714)
• Dimensions: dia. 116.5 x 200 mm
• Maximum load: 30 kg
• Weight: 0.94 kg
• Ceiling mount
• Made of aluminum alloy
• Application: indoor and outdoor
• Compatibility: Hikvision PTZ cameras (except DS-2AE-714)
• Dimensions: dia. 116.5 x 200 mm
• Maximum load: 30 kg
• Weight: 0.94 kg
The DS-1271ZJ-140 ceiling mount is designed for HIKVISION cameras. Made of aluminium alloy, it allows the dome camera to be mounted on the ceiling.
• Color: white
• Ceiling mounting
• Construction: aluminum alloy
• Maximum load: 4.5 kg
• Dimensions: 150 x 565 mm
• Weight: 1.63 kg
• Ceiling mounting
• Construction: aluminum alloy
• Maximum load: 4.5 kg
• Dimensions: 150 x 565 mm
• Weight: 1.63 kg
The DS-1271ZJ-120 ceiling mount is designed for HIKVISION cameras. Made of aluminium alloy, it allows the dome camera to be mounted on the ceiling.
• Colour: white
• Ceiling installation
• Made of: aluminium alloy
• Dimensions: 150 x 573 mm
• Maximum load: 4.5 kg
• Mass: 1.4 kg
• Ceiling installation
• Made of: aluminium alloy
• Dimensions: 150 x 573 mm
• Maximum load: 4.5 kg
• Mass: 1.4 kg
The DS-1259ZJ mounting and connection box is designed for HIKVISION ceiling cameras. It allows you to mount the camera at an angle and hide the connections.
• Colour: white
• Ceiling-mounted
• Execution: ABS + PC
• Dimensions: Φ111 × 39 m
• Mass: 0.1 kg
• Ceiling-mounted
• Execution: ABS + PC
• Dimensions: Φ111 × 39 m
• Mass: 0.1 kg
The DS-1281ZJ-M junction box is designed for mounting ceiling HIKVISION cameras. It enables the installer to mount the camera at an angle and hide connections.
• Colour: white
• Ceiling installation
• Made of aluminium alloy
• Dimensions: Φ157 × 165 x 60 m
• Mass: 0.7 kg
• Ceiling installation
• Made of aluminium alloy
• Dimensions: Φ157 × 165 x 60 m
• Mass: 0.7 kg
The DS-1258ZJ wall mount is made of plastic and is designed for HIKVISION DS-2CD21xx series cameras.
• Large amount of space in the middle of the holder allows cable connections to be concealed with ease
• Made of plastic
• Maximum load capacity: 1 kg
• Made of plastic
• Maximum load capacity: 1 kg
The DS-1273ZJ-140 wall mount is designed for HIKVISION ceiling cameras.
• Colour: white
• Wall-mounted
• Made of: aluminium alloy
• Dimensions: Φ140 × 183.5 × 232 mm
• Maximum load: 4.5 kg
• Mass: 0.71 kg
• Wall-mounted
• Made of: aluminium alloy
• Dimensions: Φ140 × 183.5 × 232 mm
• Maximum load: 4.5 kg
• Mass: 0.71 kg
The DS-1272ZJ-110 TRS wall mount is designed for HIKVISION cameras.
• Colour: white
• Wall-mounted
• Construction: aluminium alloy
• Allows the dome camera to be mounted on the wall and hide cable connections.
• Maximum load: 4.5 kg
• Wall-mounted
• Construction: aluminium alloy
• Allows the dome camera to be mounted on the wall and hide cable connections.
• Maximum load: 4.5 kg
The DS-1272ZJ-110 wall mount is designed for HIKVISION cameras. It allows you to mount the dome camera on the wall and hide the cable connections.
• Colour: white
• Wall-mounted
• Construction: aluminium alloy
• Allows the dome camera to be mounted on the wall and hide cable connections.
• Maximum load: 4.5 kg
• Wall-mounted
• Construction: aluminium alloy
• Allows the dome camera to be mounted on the wall and hide cable connections.
• Maximum load: 4.5 kg
The DS-1272ZJ-110 black wall mount is designed for HIKVISION cameras.
• Color: black
• Wall mounting
• Material: aluminum alloy
• For wall mounting of a dome camera and hiding cable connections
• Maximum load: 4.5 kg
• Wall mounting
• Material: aluminum alloy
• For wall mounting of a dome camera and hiding cable connections
• Maximum load: 4.5 kg
The DS-1272ZJ-120 wall mount is designed for HIKVISION cameras.
• Colour: white
• Wall-mounted
• Made of: aluminium alloy
• Dimensions: 120 x 122 x 173 mm
• Maximum load: 4.5 kg
• Mass: 0.75 kg
• Wall-mounted
• Made of: aluminium alloy
• Dimensions: 120 x 122 x 173 mm
• Maximum load: 4.5 kg
• Mass: 0.75 kg
The DS-1273ZJ-130-TRL wall mount is designed for HIKVISION cameras.
• Colour: white
• Wall-mounted
• Made of: aluminium alloy
• Dimensions: 132 x 183 x 228 mm
• Maximum load: 4.5 kg
• Mass: 1.32 kg
• Wall-mounted
• Made of: aluminium alloy
• Dimensions: 132 x 183 x 228 mm
• Maximum load: 4.5 kg
• Mass: 1.32 kg
The DS-1473ZJ-155B M51391 wall mount is designed for HIKVISION cameras. It is made of aluminum alloy and is used for mounting of dome cameras on the wall.
• Color: white
• Wall mounting
• Made of aluminum alloy
• Dimensions: Dia. 155 x 243 300
• Maximum load: 3 kg
• Water resistant design
• Wall mounting
• Made of aluminum alloy
• Dimensions: Dia. 155 x 243 300
• Maximum load: 3 kg
• Water resistant design
![Corner camera mount Marathon MN-40C [galvanized]](https://www.dipolnet.cz/img/thumbnails/m5140c+.jpg/ed829a50f8558f0fe72174d525303a77.jpg)
Universal bracket used to mount one camera on the corner of a building.
• Corner installation
• Possibility to pass wires
• Possibility to pass wires
The DS-1476ZJ-SUS mount allows corner installation of Hikvision cameras, with a maximum camera weight of 10 kg.
• Colour: white
• Corner installation
• Made of: stainless steel
• Dimensions: 250 x 126 x 105 mm
• Mass: 2.22 kg
• Corner installation
• Made of: stainless steel
• Dimensions: 250 x 126 x 105 mm
• Mass: 2.22 kg
The DS-1276ZJ-SUS mount allows for corner installation of Hikvision cameras, with a maximum camera weight of 10 kg.
• Color: white
• Corner mounting
• Construction: stainless steel
• Dimensions: 126 x 105 x 250 mm
• Weight: 2.4 kg
• Corner mounting
• Construction: stainless steel
• Dimensions: 126 x 105 x 250 mm
• Weight: 2.4 kg
The DS-1275ZJ-S-SUS mount allows you to install Hikvision cameras on poles 67-127 mm in diameter, with a maximum camera weight of 10 kg.
• Color: white
• Pole mounting
• Construction: stainless steel
• Dimensions: 144 x 132 x 44 mm
• Weight: 0.8 kg
• Pole mounting
• Construction: stainless steel
• Dimensions: 144 x 132 x 44 mm
• Weight: 0.8 kg
The DS-1275ZJ-SUS mount allows Hikvision cameras to be installed on a pole with a diameter of 67-127 mm, with a maximum camera weight of 10 kg.
• Color: white
• Mounted on a pole
• Made of: stainless steel
• Dimensions: 127 x 46 x 250 mm
• Mass: 1.7 kg
• Mounted on a pole
• Made of: stainless steel
• Dimensions: 127 x 46 x 250 mm
• Mass: 1.7 kg
The DS-1475ZJ-SUS bracket allows Hikvision cameras to be installed on a pole with a diameter of 67-127 mm, with a maximum camera weight of 10 kg.
• Colour: white
• Mounting: on a pole
• Made of: stainless steel
• Dimensions: 250 x 127 x 46 mm
• Mass: 1.7 kg
• Mounting: on a pole
• Made of: stainless steel
• Dimensions: 250 x 127 x 46 mm
• Mass: 1.7 kg
The DS-1604ZJ-BOX is a wall mount with mounting box, made of aluminium alloy. The bracket is designed for mounting Hikvision PTZ cameras.
• Color: white
• Wall-mounted
• Material: aluminum alloy
• Maximum load: 10 kg
• Dimensions: 395 x 281 x 170 mm
• Weight: 2.15 kg
• Wall-mounted
• Material: aluminum alloy
• Maximum load: 10 kg
• Dimensions: 395 x 281 x 170 mm
• Weight: 2.15 kg
Brackets dedicated to the installation of 1U high, 380 mm deep DS-76xx and DS-72xx series recorders in 19" RACK cabinets.
• For mounting DS-76xx and DS-72xx series DVRs with a height of 1U, depth of 380 mm in 19" RACK cabinets
• Mounts are suitable for 8 - 32 channel recorders supporting 2 hard drives
• Mounts are suitable for 8 - 32 channel recorders supporting 2 hard drives
![Marathon MK-61B bracket for mounting cameras on masts/posts with diameter of 30 to 105 mm [black].](https://www.dipolnet.cz/img/thumbnails/m5173b+.jpg/25ed41be859259d463343cec0282486b.jpg)
Universal bracket for mounting one or two cameras on masts or poles.
![Marathon MK-61C bracket for mounting cameras on masts/posts with diameter of 30 to 105 mm [galvanized].](https://www.dipolnet.cz/img/thumbnails/m5173c+.jpg/462ecf09091431b65c699f334500c3d8.jpg)
Universal bracket for mounting one or two cameras on masts or poles.
![Marathon MK-61W bracket for mounting cameras on masts/posts with diameter of 30 to 105 mm [white]](https://www.dipolnet.cz/img/thumbnails/m5173w+.jpg/d0f43ed03c2d054c221816b135b29a00.jpg)
Universal bracket for mounting one or two cameras on masts or poles.
The OR-150/T bracket is used to mount cameras on a mast or lamppost with a diameter of 70 to 280 mm. It is made of powder-coated steel.
• For mounting cameras on a mast or lamppost with a diameter of 70 to 280 mm
• Made of powder-coated steel
• Permits the installation of one camera with rectangular mounting screw spacing
• Made of powder-coated steel
• Permits the installation of one camera with rectangular mounting screw spacing
The clamp with mounting plate is designed for mounting the hermetic enclosure on elements such as poles, masts and structural components.
• Allows Pulsar power supplies to be mounted on poles, masts, etc.
The housing is used to protect the recorder from unauthorised access or theft.
• Application: digital CCTV DVRs
• Dimensions of DVR space: W1=375, H1=335, D1=95 [mm, +/-2]
• Tamper protection: tamper – opening of the housing and optional detachment from the wall
• Surface-mounted, lockable
• Vertical DVR mounting
• Dimensions of DVR space: W1=375, H1=335, D1=95 [mm, +/-2]
• Tamper protection: tamper – opening of the housing and optional detachment from the wall
• Surface-mounted, lockable
• Vertical DVR mounting
The housing is used to protect the recorder from unauthorised access or theft.
• Application: CCTV digital recorders
• Dimensions of DVR space: W1=375, H1=335, D1=95 [mm, +/-2]
• Protection against tampering: tamper - opening the housing and optionally tearing it off the wall
• Surface-mounted enclosure, lockable
• Recorder mounting in vertical position
• Dimensions of DVR space: W1=375, H1=335, D1=95 [mm, +/-2]
• Protection against tampering: tamper - opening the housing and optionally tearing it off the wall
• Surface-mounted enclosure, lockable
• Recorder mounting in vertical position
The housing is used to protect the recorder from unauthorised access or theft.
• Application: CCTV digital recorders
• Dimensions of DVR space: W1=470, H1=485, D1=95 [mm, +/-2]
• Protection against tampering: tamper - opening the housing and optionally tearing it off the wall
• Surface-mounted enclosure, lockable
• Recorder mounting in vertical position
• Dimensions of DVR space: W1=470, H1=485, D1=95 [mm, +/-2]
• Protection against tampering: tamper - opening the housing and optionally tearing it off the wall
• Surface-mounted enclosure, lockable
• Recorder mounting in vertical position
The housing is used to protect the recorder from unauthorised access or theft.
• Application: CCTV digital recorders
• Dimensions of DVR space: W2=355, H2=90, D1=235 [mm, +/-2]
• Protection against tampering: tamper - opening the housing and optionally tearing it off the wall
• Surface-mounted enclosure, lockable
• Horizontal installation of the recorder
• Dimensions of DVR space: W2=355, H2=90, D1=235 [mm, +/-2]
• Protection against tampering: tamper - opening the housing and optionally tearing it off the wall
• Surface-mounted enclosure, lockable
• Horizontal installation of the recorder
The housing is used to protect the recorder from unauthorised access or theft.
• Application: CCTV digital recorders
• Dimensions of DVR space: W2=355, H2=90, D1=360 [mm, +/-2]
• Protection against tampering: tamper - opening the casing and optionally tearing it off the wall
• Surface-mounted enclosure, lockable
• Horizontal installation of the recorder
• Dimensions of DVR space: W2=355, H2=90, D1=360 [mm, +/-2]
• Protection against tampering: tamper - opening the casing and optionally tearing it off the wall
• Surface-mounted enclosure, lockable
• Horizontal installation of the recorder
The housing is used to protect the recorder from unauthorised access or theft.
• Application: CCTV digital recorders
• Dimensions of DVR space: W2=455, H2=90, D1=325 [mm, +/-2]
• Protection against tampering: tamper - opening the housing and optionally tearing it off the wall
• Surface-mounted enclosure, lockable
• Horizontal installation of the recorder
• Dimensions of DVR space: W2=455, H2=90, D1=325 [mm, +/-2]
• Protection against tampering: tamper - opening the housing and optionally tearing it off the wall
• Surface-mounted enclosure, lockable
• Horizontal installation of the recorder
The housing is used to protect the recorder from unauthorised access or theft.
• Application: CCTV digital recorders
• Dimensions of DVR space: W2=505, H2=115, D1=505 [mm, +/-2]
• Protection against tampering: tamper - opening the housing and optionally tearing it off the wall
• Surface-mounted enclosure, lockable
• Horizontal installation of the recorder
• Dimensions of DVR space: W2=505, H2=115, D1=505 [mm, +/-2]
• Protection against tampering: tamper - opening the housing and optionally tearing it off the wall
• Surface-mounted enclosure, lockable
• Horizontal installation of the recorder
Suspension bracket for housing AW0445 / AW0447.
The AWO483 enclosure suspension bracket allows the enclosure to be securely mounted under a shelf, countertop or ceiling.
The AWO471 enclosure suspension bracket allows the enclosure to be securely mounted under a shelf, countertop or ceiling.
The DS-1260ZJ mounting and connection box is designed for HIKVISION DS-2CD26xxF-I series cameras.
• Colour: white
• Wall or ceiling mounted
• Made of aluminium alloy
• Allows to hide cable connections
• Wall or ceiling mounted
• Made of aluminium alloy
• Allows to hide cable connections
The DS-1260ZJ mounting and connection box (black) is designed for HIKVISION DS-2CD26xxF-I series cameras.
• Black colour
• Wall or ceiling mounting
• Made: aluminum alloy
• Allows you to hide cable connections
• Wall or ceiling mounting
• Made: aluminum alloy
• Allows you to hide cable connections
The DS-1280ZJ-DM18 mounting and connection box is designed for HIKVISION DS-2CD21xx series cameras.
• Colour: white
• Wall or ceiling mounted
• Made of aluminium alloy
• Allows to hide cable connections
• Wall or ceiling mounted
• Made of aluminium alloy
• Allows to hide cable connections
The DS-1280ZJ-DM18 junction box is designed for HIKVISION DS-2CD21xx series cameras.
• Black junction box for DS-2CD21xx series cameras
• Material: aluminum alloy
• Maximum load: 4.5 kg
• Material: aluminum alloy
• Maximum load: 4.5 kg
The DS-1280ZJ-DM21 mounting and connection box is designed for HIKVISION dome cameras.
• Colour: white
• Wall or ceiling mounted
• Made of aluminium alloy
• Allows to hide cable connections
• Wall or ceiling mounted
• Made of aluminium alloy
• Allows to hide cable connections
The DS-1280ZJ-DM46 (black) junction box is designed for HIKVISION dome cameras.
• Color: black
• Wall or ceiling mounting
• Material: aluminum alloy
• Covers cable connections
• Wall or ceiling mounting
• Material: aluminum alloy
• Covers cable connections
The DS-1280ZJ-DM8 junction box is designed for HIKVISION DS-2CD23x3G2 series dome cameras.
• Material: aluminum alloy
• Mounting: flat surface
• Waterproof design
• Maximum load capacity: 1 kg
• Mounting: flat surface
• Waterproof design
• Maximum load capacity: 1 kg
The DS-1280ZJ-DM8 (black) junction box is designed for HIKVISION DS-2CD23x3G2 series dome cameras.
• Material: aluminium alloy
• Mounting: flat surface
• Waterproof design
• Colour: black
• Maximum load capacity: 1 kg
• Mounting: flat surface
• Waterproof design
• Colour: black
• Maximum load capacity: 1 kg
The DS-1280ZJ-PT6 mounting and connection box is designed for Hikvision dome cameras.
• Color: white
• Wall or ceiling mounting
• Material: aluminum alloy
• Covers cable connections
• Wall or ceiling mounting
• Material: aluminum alloy
• Covers cable connections
The DS-1280ZJ-S installation box has been designed for HIKVISION compact IP cameras.
• Colour: white
• Wall or ceiling mounted
• Made of aluminium alloy
• Allows to hide cable connections
• Wall or ceiling mounted
• Made of aluminium alloy
• Allows to hide cable connections
The DS-1280ZJ-M mounting and connection box is designed for HIKVISION dome cameras. Made of metal.
• Colour: white
• Wall or ceiling mounted
• Made of aluminium alloy
• Allows to hide cable connections
• Wall or ceiling mounted
• Made of aluminium alloy
• Allows to hide cable connections
The DS-1280ZJ-XS mounting and connection box is designed for HIKVISION compact and dome cameras. Made of metal.
• Colour: white
• Wall or ceiling mounted
• Made of aluminium alloy
• Allows to hide cable connections
• Wall or ceiling mounted
• Made of aluminium alloy
• Allows to hide cable connections
The DS-1280ZJ-XS mounting and connection box black is designed for HIKVISION compact and dome cameras.
• Mass: 0.3 kg
• Maximum load capacity: 4.5 kg
• Dimensions: Φ100 x 43.2 x 129 mm
• Maximum load capacity: 4.5 kg
• Dimensions: Φ100 x 43.2 x 129 mm
The DS-1280ZJ-S mounting and connection box (black) is designed for HIKVISION IP and HD-TVI cameras. Made of metal, it allows to hide cable connections, video transformers, etc. Weight 0.5 kg, maximum load capacity 4.5 kg. Can be mounted outdoors.
• Type of goods: junction and mounting box
• Colour: black
• Material: aluminium alloy
• Mounting: wall, ceiling
• Maximum load: 4.5 kg
• Colour: black
• Material: aluminium alloy
• Mounting: wall, ceiling
• Maximum load: 4.5 kg
The installation box 150x110x700 mm is made of plastic. It is used to protect electronic devices.
• The box is designed for protecting electronic devices and cable connections in installations
• IP56 protection class
• Mounting the cover on steel screws
• Can be purchased with a dedicated mounting plate
• IP56 protection class
• Mounting the cover on steel screws
• Can be purchased with a dedicated mounting plate
The M5734 installation box is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
• Designed for protection of electronic devices and cable connectors
• Dimensions: 190x140x70 mm
• IP rating: IP56
• Cover fixing with steel screws
• Dedicated chassis available
• Dimensions: 190x140x70 mm
• IP rating: IP56
• Cover fixing with steel screws
• Dedicated chassis available
The M5736 installation box (240x190x90 mm) is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
• The box is designed for protecting electronic devices and cable connections in installations
• IP56 protection class
• Mounting the cover on steel screws
• Can be purchased with a dedicated mounting plate
• IP56 protection class
• Mounting the cover on steel screws
• Can be purchased with a dedicated mounting plate
The installation box 240x190x125 mm is made of plastic.
• Dedicated for low-voltage installations
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x125 mm
• Optional accessories: chassis, cable fittings/glands
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x125 mm
• Optional accessories: chassis, cable fittings/glands
The Alubox 140x115x60 mm M5742 box is an electrical installation box made of aluminium. It owes its high IP66 protection class to the gasket.
• Hermetic box made of aluminium
• IP66 protection class
• EPDM rubber seal
• Dimensions: 140x115x60 mm
• Possibility to purchase dedicated accessories
• IP66 protection class
• EPDM rubber seal
• Dimensions: 140x115x60 mm
• Possibility to purchase dedicated accessories
Pole adaptor for the attachment of ABOX-CA1 outdoor enclosures.
• Provides the ability to mount the APT-4-11-CA switch on a pole
The DS-D5022F2-1V2S is a Hikvision-branded monitor designed for use in 24/7 continuous CCTV monitoring systems.
• Screen type: VA with E-LED backlight
• Resolution: Full HD (1920 x 1080)
• Low blue light technology
• Screen diagonal: 21.45"
• Response time: 8 ms
• Contrast: 4000:1
• Brightness: 250 cd/m²
• Viewing angles (horizontal/vertical): 178°/178°
• Inputs: 1 x HDMI, 1 x VGA
• Audio input
• Built-in 2 speakers (4 W)
• Very sleek housing including frame
• Mounting: stand or VESA standard (75 x 75 mm)
• Resolution: Full HD (1920 x 1080)
• Low blue light technology
• Screen diagonal: 21.45"
• Response time: 8 ms
• Contrast: 4000:1
• Brightness: 250 cd/m²
• Viewing angles (horizontal/vertical): 178°/178°
• Inputs: 1 x HDMI, 1 x VGA
• Audio input
• Built-in 2 speakers (4 W)
• Very sleek housing including frame
• Mounting: stand or VESA standard (75 x 75 mm)
The DS-D5024F2-BV2S is a Hikvision-branded monitor designed for use in 24/7 continuous CCTV monitoring systems.
• Screen type: VA with E-LED backlight
• Resolution: Full HD (1920 x 1080)
• Low blue light technology
• Screen diagonal: 23.8"
• Response time: 7 ms
• Contrast: 4000:1
• Brightness: 250 cd/m²
• Viewing angles (horizontal/vertical): 178°/178°
• Inputs: 1 x HDMI, 1 x VGA
• Audio input
• Built in speaker
• Very sleek housing including frame
• Mounting: stand or VESA standard (75 x 75 mm)
• Resolution: Full HD (1920 x 1080)
• Low blue light technology
• Screen diagonal: 23.8"
• Response time: 7 ms
• Contrast: 4000:1
• Brightness: 250 cd/m²
• Viewing angles (horizontal/vertical): 178°/178°
• Inputs: 1 x HDMI, 1 x VGA
• Audio input
• Built in speaker
• Very sleek housing including frame
• Mounting: stand or VESA standard (75 x 75 mm)
Universal monitor suitable for use 12/ 7 in surveillance systems. IPS screen with 1920 × 1080 resolution with E-LED backlight.
• Monitor for 24/7 operation
• Wide viewing angle vertically and horizontally
• Elegant design - frameless housing
• Wide viewing angle vertically and horizontally
• Elegant design - frameless housing
The Hikvision DS-D5043UC monitor is designed for 24/7 operation in CCTV surveillance systems.
• Screen diagonal: 42.5"
• D-LED backlight technology with 4k (3840 × 2160) resolution.
• Viewing angles: horizontal: 178°
• Working time: 24/7
• Response time: 8 ms
• Interfaces: 2 × HDMI 2.0, 1 × VGA, 1 × LAN, 1 × RS232, 1 × audio input, 1 × audio output, 1 × USB3.0, 1 × USB 2.0
• Built in speaker: 2 × 8 W
• Selectable signal source
• Contrast: 1200:1
• Brightness: 400 cd/m²
• Mounting on the wall in VESA 200 or VESA 400 standard
• D-LED backlight technology with 4k (3840 × 2160) resolution.
• Viewing angles: horizontal: 178°
• Working time: 24/7
• Response time: 8 ms
• Interfaces: 2 × HDMI 2.0, 1 × VGA, 1 × LAN, 1 × RS232, 1 × audio input, 1 × audio output, 1 × USB3.0, 1 × USB 2.0
• Built in speaker: 2 × 8 W
• Selectable signal source
• Contrast: 1200:1
• Brightness: 400 cd/m²
• Mounting on the wall in VESA 200 or VESA 400 standard
Universal tool to facilitate the implementation, configuration and maintenance of CCTV systems and computer networks.
• Scratch-resistant 7" IPS touchscreen display with high brightness for operation even in sunlight
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A
The FS8114 tester is used for measuring cable continuity, measuring cable length and measuring the distance to cable damage.
• Cable types tested: UTP/STP cat. 5, 5e, 6, 7, telephone, coaxial
• Cable length measurement
• Measurement frequency: 130 kHz
• Measurement method: capacitive
• Maximum length: 2000 m
• Minimum length: 1 m
• "Find port" – quick search of the port in a network device
• Searching and testing cables in PoE mode (passive PoE)
• Pair integrity test
• Measuring voltages on individual conductors (POE)
• Transmitter voltage protection: 60 VAC / 48 VDC
• Auto-OFF function
• Battery discharge indicator
• Record of measurement results in the device memory
• Built-in visual fault locator (VFL) for optical cables
• Power: 9 V battery (included)
• Cable length measurement
• Measurement frequency: 130 kHz
• Measurement method: capacitive
• Maximum length: 2000 m
• Minimum length: 1 m
• "Find port" – quick search of the port in a network device
• Searching and testing cables in PoE mode (passive PoE)
• Pair integrity test
• Measuring voltages on individual conductors (POE)
• Transmitter voltage protection: 60 VAC / 48 VDC
• Auto-OFF function
• Battery discharge indicator
• Record of measurement results in the device memory
• Built-in visual fault locator (VFL) for optical cables
• Power: 9 V battery (included)
The FS8117 cable tester allows to test UTP/STP cables: cable quality, attenuation, length, distance to failure, short-circuit, improperly crimped connectors, Ping test, correct connection to the router, PoE voltage test, scan of active IPs in the network. Precision inductive probe – high power pair ...
• Tested cable types: CAT 5, 5e, 6, 7 twisted pair (UTP/STP), telephone, coaxial
• Cable length testing
• Function - "find port" quick port search on network devices
• Cable search and testing in PoE mode (passive PoE)
• Pair integrity test
• PoE wire voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Recording of measurement results in the device memory
• "Find port" function - quick port search in network devices
• PING test
• IP Scan
• Quick identification of the connected network port
• Cable length testing
• Function - "find port" quick port search on network devices
• Cable search and testing in PoE mode (passive PoE)
• Pair integrity test
• PoE wire voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Recording of measurement results in the device memory
• "Find port" function - quick port search in network devices
• PING test
• IP Scan
• Quick identification of the connected network port
Terminators enable detection and testing of 8 wires (ID2-ID9). They work with FORSCHER FS8117 N7051 meter.
• Number of terminators: 8
• Cable types tested: twisted pair cat. 5, 5e, 6, 7 (UTP/STP)
• Identification of specific twisted pair cable
• Cable types tested: twisted pair cat. 5, 5e, 6, 7 (UTP/STP)
• Identification of specific twisted pair cable
The tester is used to measure the continuity of the cabling. The device is equipped with a terminator.
• LAN cable continuity testing
• UTP, FTP and telephone cables
• RJ45 and RJ11 connectors
• UTP, FTP and telephone cables
• RJ45 and RJ11 connectors
Western Digital's PURPLE series hard drives are designed for use in 24x7 video surveillance systems.
• Capacity: 1 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
SkyHawk™ drives are built for surveillance systems. Optimised for network recorders, they are designed for 24/7 operation.
• Capacity: 1 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
The Western Digital hard drives from PURPLE series have been purpose-built for surveillance video systems operating in 24/7 mode.
• Capacity: 2 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
SkyHawk™ drives are built for surveillance systems. Optimised for network recorders, they are designed for 24/7 operation.
Western Digital's PURPLE series hard drives are designed for use in 24x7 video surveillance systems.
• Capacity: 4 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
SkyHawk™ drives are built for surveillance systems. Optimised for network recorders, they are designed for 24/7 operation.
• Capacity: 4 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
Western Digital's PURPLE series hard drives are designed for use in 24x7 video surveillance systems.
• Capacity: 6 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
SkyHawk™ drives are built for surveillance systems. Optimised for network recorders, they are designed for 24/7 operation.
• Capacity: 6 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
Western Digital's PURPLE series hard drives are designed for use in 24x7 video surveillance systems.
• Capacity: 8 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
SkyHawk™ drives are built for surveillance systems. Optimised for network recorders, they are designed for 24/7 operation.
• Capacity: 8 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
SkyHawk™ drives are built for surveillance systems. Optimised for network recorders, they are designed for 24/7 operation.
• Capacity: 10 TB
• Interface: SATA III
• Dedicated for CCTV applications
• Interface: SATA III
• Dedicated for CCTV applications
Drive designed for monitoring systems. Optimised for network recorders, suitable for 24/7 operation.
• Capacity: 16 TB
• Interface: SATA III
• Dedicated drive for CCTV
• Interface: SATA III
• Dedicated drive for CCTV
Western Digital's PURPLE series hard drives are designed for use in 24x7 video surveillance systems.
• Capacity: 10 TB
• Interface: SATA III
• Dedicated for CCTV applications
• Interface: SATA III
• Dedicated for CCTV applications
Western Digital's PURPLE series hard drives are designed for use in 24x7 video surveillance systems.
• Capacity: 12 TB
• Interface: SATA III
• Dedicated for CCTV applications
• Interface: SATA III
• Dedicated for CCTV applications
MicroSDHC(Secure Digital High Capacity) cards are microSD cards with increased capacity. However, they have the disadvantage of lower data transfer speeds.
• Capacity: 64 GB
• MicroSDXC card
• MicroSDXC card
Dahua memory cards are manufactured using the highest quality NAND FLASH components.
• Capacity: 64 GB
• Class10 U3
• Class10 U3
MicroSDHC(Secure Digital High Capacity) cards are microSD cards with increased capacity. However, they have the disadvantage of lower data transfer speeds.
• Capacity: 128 GB
• MicroSDXC card
• MicroSDXC card
Dahua memory cards are manufactured using the highest quality NAND FLASH components.
• Capacity: 128 GB
• Class10 U3
• Class10 U3
GOODRAM memory cards are manufactured with the highest quality NAND FLASH components.
• Capacity: 256 GB
• Class 10
• SD adapter
• Class 10
• SD adapter
Etrix coaxial cable with molded BNC connectors 0.5 m.
• For connection in CCTV systems
• Length: 0.5 m
• Inner conductor and screening made of copper
• Inner conductor diameter: 0.5 mm
• Length: 0.5 m
• Inner conductor and screening made of copper
• Inner conductor diameter: 0.5 mm
Cable length: 0.8 m. This patch cable is recommended for applications in CCTV systems e.g. for connection of cameras to DVRs.
• Cable for CCTV system connections
• Length 0.8 m
• Length 0.8 m
Power cable 1.5 m with DC 2.1/5.5 plug.
• Length: 1.5 m
• Flooded connector
• Flooded connector
S-55 quick-release coupling to a standard DC 2.1/5.5 camera power socket.
• DC 2.1/5.5 mm connector
• Screw cable terminals
• Maximum voltage: 24 V DC
• Screw cable terminals
• Maximum voltage: 24 V DC
Quick-connect socket G-55 connects a two-wire power cable to allow a standard DC connection (2.1/5.5).
• DC 2.1/5.5 mm socket
• Screw cable terminals
• Max. voltage 24 VDC
• Screw cable terminals
• Max. voltage 24 VDC
The RCA-BNC adapter is used e.g. for connecting the AUDIO output of a DVR (BNC) to an audio amplifier etc. with RCA input, via a typical RCA-RCA patch cable.
• RCA to BNC plug transition
This adapter is used in audio channels, e.g. to connect AUDIO output of a DVR (BNC), via a coaxial cable, to an audio amplifier with RCA input.
• RCA connector to BNC socket
The monolithic, nickel-plated brass F-connector is designed for RG-59 type cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family
The monolithic nickel-plated brass BNC connector is designed for RG-59/CAMSET cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
The monolithic nickel-plated brass BNC connector is designed for RG-6 cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
The monolithic nickel-plated brass BNC connector is designed for TRISET cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
The monolithic angle compression connector, made of nickel-plated brass, is designed for RG-59 type cables.
• Connector type: BNC compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
The monolithic angle compression connector, made of nickel-plated brass, is designed for RG-6 type cables.
• Connector type: BNC compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
F socket to BNC connector. Carefully selected materials, excellent manufacturing accuracy ensure fast and secure assembly (no connection clearances).
• F-socket to BNC connector
• Material: nickel-plated brass
• Contact pin: gold-plated brass
• Material: nickel-plated brass
• Contact pin: gold-plated brass
BNC 75 plug crimped for RG-59.
• Connector type: BNC crimped
• Crimping tool required
• Crimping tool required
BNC 75 plug crimped suitable for the RG-6 cable.
• It allows you to terminate an RG-6 cable with a BNC plug
• It requires the use of a crimping tool
• It requires the use of a crimping tool
The BNC socket to BNC socket adapter enables the connection of two plugs of this type.
• It allows you to connect two BNC plugs
Keystone connector with two BNC sockets. Allows two sections of coaxial cable, terminated with BNC connectors on both sides, to be connected together.
• Connector type: BNC
The SC simplex keystone adapter, allows a single SC simplex adapter to be fitted into patch panels and sockets designed for mounting keystone modules.
• Dedicated for SC connectors
AXON NetProtector is a multi-channel device designed to provide surge protection for devices connected to a 10/100/1000 Mbps Ethernet network.
• Socket type: RJ-45
• Number of tracks: 4
• Protected cable conductors: 1, 2, 3, 4, 5, 6, 7, 8
• Dimensions: 166x49x30 mm
• PoE power supply
• Number of tracks: 4
• Protected cable conductors: 1, 2, 3, 4, 5, 6, 7, 8
• Dimensions: 166x49x30 mm
• PoE power supply
AXON PRO Video IP Protector 4 PoE+ is a four-channel surge protection device for CCTV systems.
• Socket type: RJ45
• Number of paths: 4
• Protected cable wires: 1,2,3,4,5,6,7,8
• Dimensions: 167x50x32 mm
• Pass-through for PoE supply
• Number of paths: 4
• Protected cable wires: 1,2,3,4,5,6,7,8
• Dimensions: 167x50x32 mm
• Pass-through for PoE supply
The Etrix 1VP-B is designed for single-source video transmission via twisted-pair cable.
• Transmission of video signal via a twisted-pair cable
• PAL (CVBS): max. transmission distance of 400 m
• HD-TVI, AHD: max. transmission distance of 200 m (720p) or 150 m (1080p)
• HD-CVI: max. transmission distance of 200 m
• PAL (CVBS): max. transmission distance of 400 m
• HD-TVI, AHD: max. transmission distance of 200 m (720p) or 150 m (1080p)
• HD-CVI: max. transmission distance of 200 m
The Etrix 1VP-D transformer has a BNC connector attached with a flexible cable, which ensures free positioning of the BNC end. The UTP cable is connected to a crimp connector.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP terminal connector
• BNC 75 connector placed on cable
• UTP terminal connector
The Etrix 1VP-C transformer has a BNC connector attached with a flexible cable, which ensures free positioning of the BNC end.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP screw-connector
• BNC 75 connector placed on cable
• UTP screw-connector
The ETRIX 1VAP transformer has a connector with a flexible cable BNC plug and a 2.1/5.5 socket and plug.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP RJ-45-connector
• BNC 75 connector placed on cable
• UTP RJ-45-connector
The UTP USB extender is used to connect devices using the universal serial bus.
• Allows remote operation of remote devices
• Maximum range 50 m
• Maximum range 50 m
USB extender using UTP cable is used to connect devices with an universal serial bus.
• Allows remote operation of distant devices
• Maximum range 150 m
• Maximum range 150 m
The RV-1/2P-UHD multiplexer is designed to split signals from two sources without any loss of quality of the signal.
• Signal splitting from 1 to 2 outputs
• Input splitting configuration with jumpers
• Input splitting configuration with jumpers
D-SEP/HD is a 1-channel galvanic separator for signals transmitted via 75 ohm coaxial cable.
• Isolation between individual installation points, such as cameras and DVRs
• Protection against the effects of potential differences
• CVBS, AHD, HD-CVI and HD-TVI signals up to 8 MPix
• Protection against the effects of potential differences
• CVBS, AHD, HD-CVI and HD-TVI signals up to 8 MPix
The VHD-15 repeater is designed to amplify video signals transmitted via twisted-pair or coaxial cable.
• Standard: AHD - 4 Mpx, HD-CVI - 1080p, HD-TVI - 5 Mpx, CVBS - PAL / NTSC
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
The ML517 power adapter allows the user to power a Hikvision DVR with 4-pin power socket from a suitable power supply unit with 2.1/5.5 plug.
• Operating voltage: 30 VDC
• Maximum current: 5.0 A
• Plug type – socket: JACK 2.1/5.5 (male)
• Plug type – plug: DIN4 (male)
• Cable length: 10 cm
• Maximum current: 5.0 A
• Plug type – socket: JACK 2.1/5.5 (male)
• Plug type – plug: DIN4 (male)
• Cable length: 10 cm
Audio module designed for cameras. It has adjustable gain.
• Power supply: 12 V
• Current consumption: 5 mA
• Gain adjustment: 1x-500x
• Cable length with microphone: 100 mm
• Current consumption: 5 mA
• Gain adjustment: 1x-500x
• Cable length with microphone: 100 mm
The MP-6/D microphone is designed for listening to ambient sounds.
• Power supply: 12 V
• Current consumption: 5 mA
• Frequency response up to 20 kHz
• Metal housing
• Current consumption: 5 mA
• Frequency response up to 20 kHz
• Metal housing
• Format: A4
• Material: PVC
• Material: PVC
A3 PVC warning board
• A3 size
• Material: PVC
• Material: PVC
A set of stickers consisting of one large one measuring 300 x 100 mm and two small ones measuring 150 x 50 mm.
• A set of stickers to mark the monitored site
A set of three stickers (300x100 mm and two 150x50 mm) to be put under glass panes.
• A set of stickers to mark the monitored site
The device lessens the risk of damage caused by surges in power lines to TV, stereo, computer or other electronic equipment.
• Number of sockets: 7
• Dimensions: 370x65x44 mm
• Rated load current (total): 10 A
• Dimensions: 370x65x44 mm
• Rated load current (total): 10 A
The device reduces the risk of damage to the computer, TV, radio caused by a power surge.
• Number of sockets: 8
• Dimensions: 445x54x55 mm
• Maximum total output current: 10 A
• Dimensions: 445x54x55 mm
• Maximum total output current: 10 A
The device reduces the risk of damage to the equipment caused by overvoltage in the mains. The Acar 504 WF has an anti-interference filter.
• Number of sockets: 5
• Anti-interference filter
• Dimensions: 385x59x55 mm
• Rated load current (total): 10 A
• Anti-interference filter
• Dimensions: 385x59x55 mm
• Rated load current (total): 10 A
The DS-KIS602(B) is a complete Hikvision IP video intercom kit that can form the basis for further expansion.
• DS-KD8003-IME1(B) door/gate station main module
• DS-KD-ACW1 1-module surface-mounted housing
• DS-KH6320-WTE1 internal station (monitor)
• 4 x PoE DS-3E0105P-E/M switch
• 16 GB microSD card
• DS-KD-ACW1 1-module surface-mounted housing
• DS-KH6320-WTE1 internal station (monitor)
• 4 x PoE DS-3E0105P-E/M switch
• 16 GB microSD card
DS-KIS604-S(C) is a complete IP Villa 2 gen. Hikvision video intercom kit dedicated to Villa type systems.
• DS-KV8113-WME1(C)/Surface door/gate station main module
• DS-KH6320-WTE1 internal station
• 4 x PoE DS-3E0105P-E/M(B) switch
• MicroSD (16 GB) card
• DS-KH6320-WTE1 internal station
• 4 x PoE DS-3E0105P-E/M(B) switch
• MicroSD (16 GB) card
DS-KIS702Y is a 2-wire video intercom kit from Hikvision.
• DS-KD8003Y-IME2 G73646 door station main module – 1
• DS-KD-ACW1 Hikvision 1-module surface-mounted housing G74351 – 1
• DS-KH6320Y-WTE2 G74019 indoor station – 1
• Audio, video, power distributor DS-KAD704Y – 1
• Power supply DS-KAW30-2N – 1
• MicroSD card (16 GB) – 1
• DS-KD-ACW1 Hikvision 1-module surface-mounted housing G74351 – 1
• DS-KH6320Y-WTE2 G74019 indoor station – 1
• Audio, video, power distributor DS-KAD704Y – 1
• Power supply DS-KAW30-2N – 1
• MicroSD card (16 GB) – 1
The DS-KIS703Y-P is a complete 2-Wire Hikvision 2nd generation video intercom kit.
• 1-subscriber door/gate station
• Fisheye color camera: 2 MP+++ (140° (H)/85° (V))
• Built-in speaker and microphone
• Built-in infrared illuminator IR+++ up to 3 m
• 2 relay outputs for control
• 12 V/0.5 A output DC for powering the electric door strike
• Built-in nameplate with LED backlight
• 2 alarm inputs (for output button or a reed switch
• Image functions: WRD
• Configuration from the monitor
• 24V DC power supply from the monitor via 2-Wire bus
• Mounting: surface and flush
• Protection rating: IP65
• Power consumption: < 10 W
• Dimensions: 169 × 110 × 32
• Fisheye color camera: 2 MP+++ (140° (H)/85° (V))
• Built-in speaker and microphone
• Built-in infrared illuminator IR+++ up to 3 m
• 2 relay outputs for control
• 12 V/0.5 A output DC for powering the electric door strike
• Built-in nameplate with LED backlight
• 2 alarm inputs (for output button or a reed switch
• Image functions: WRD
• Configuration from the monitor
• 24V DC power supply from the monitor via 2-Wire bus
• Mounting: surface and flush
• Protection rating: IP65
• Power consumption: < 10 W
• Dimensions: 169 × 110 × 32
DS-KD8003Y-IME2 is Hikvision's second-generation video door station master module, dedicated to Hikvision 2-Wire operation.
• Fisheye color camera: 2 MP (146° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 relay outputs for control (30 V, 2 A)
• Built-in nameplate holder with 1 button and LED backlight
• 4 alarm inputs
• Image functions: BLC, DNR, WRD
• Compatible with DS-KD-XXX series frames
• Maximum expansion up to 8 modules
• Support for up to 500 indoor stations
• Remote operation via Hik-Connect app (video door monitor required)
• Output to electric door strike power supply: 12 VDC/0.5 A
• Configuration via iVMS-4200 (v3)
• Communication bus: 2-Wire
• Power and communication using G74824 DS-KAD706Y – 24 VDC
• Functionality of 2nd generation IP video door entry system
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 relay outputs for control (30 V, 2 A)
• Built-in nameplate holder with 1 button and LED backlight
• 4 alarm inputs
• Image functions: BLC, DNR, WRD
• Compatible with DS-KD-XXX series frames
• Maximum expansion up to 8 modules
• Support for up to 500 indoor stations
• Remote operation via Hik-Connect app (video door monitor required)
• Output to electric door strike power supply: 12 VDC/0.5 A
• Configuration via iVMS-4200 (v3)
• Communication bus: 2-Wire
• Power and communication using G74824 DS-KAD706Y – 24 VDC
• Functionality of 2nd generation IP video door entry system
DS-KD-BK is an empty blank module, designed to work with the second generation Hikvision IP video intercom system.
• Other devices can be mounted inside the module
• Mounting in DS-KD-ACF and DS-KD-ACW frames
• Mounting in DS-KD-ACF and DS-KD-ACW frames
The DS-KH8350-WTE1/EU is a state-of-the-art touchscreen monitor designed to support second-generation Hikvision IP video door entry systems.
• 7" colour IPS touchscreen with a resolution of 1024 x 600 px
• Provides a thin aluminium frame and tempered glass
• Built-in speakers and microphone
• Perception of images from the door station and IP cameras (Hikvision, Onvif)
• Access and remote opening via iVMS-4200, Hik-Connect softwar
• Additional functions: intercom, recording of photos and voice messages
• Picture capture while the tenant is away
• Built-in memory: 256 MB
• Supports microSD cards up to 32 GB
• 8 inputs and 2 alarm outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• DC 12 V or PoE (802.3af) power supply
• Winner of the Red Dot Design Award 2017
• Provides a thin aluminium frame and tempered glass
• Built-in speakers and microphone
• Perception of images from the door station and IP cameras (Hikvision, Onvif)
• Access and remote opening via iVMS-4200, Hik-Connect softwar
• Additional functions: intercom, recording of photos and voice messages
• Picture capture while the tenant is away
• Built-in memory: 256 MB
• Supports microSD cards up to 32 GB
• 8 inputs and 2 alarm outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• DC 12 V or PoE (802.3af) power supply
• Winner of the Red Dot Design Award 2017
The DS-KH8380-WTE1 is an advanced monitor designed to support second-generation Hikvision IP video door entry systems.
• 7" TFT LCD colour touch screen with a resolution of 1024 x 600 px
• Operation via graphical user interface UI v2.0
• Built-in speakers and microphone
• Viewing of images from door stations and IP cameras
• Supported compression: H.265, H.264
• Clear sound thanks to echo and noise suppression
• Management via iVMS-4200
• Access and remote opening with iVMS-4200, Hik-Connect software
• Additional functions: intercom, recording of pictures and voice messages
• Recording of photos while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 4 relay outputs (max. 30 V/DC, 1 A)
• Power output: 12 V/DC, 0.5 A
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply: 12 V/DC or PoE (802.3af)
• Operation via graphical user interface UI v2.0
• Built-in speakers and microphone
• Viewing of images from door stations and IP cameras
• Supported compression: H.265, H.264
• Clear sound thanks to echo and noise suppression
• Management via iVMS-4200
• Access and remote opening with iVMS-4200, Hik-Connect software
• Additional functions: intercom, recording of pictures and voice messages
• Recording of photos while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 4 relay outputs (max. 30 V/DC, 1 A)
• Power output: 12 V/DC, 0.5 A
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply: 12 V/DC or PoE (802.3af)
The DS-KH9510-WTE1(B) is a state-of-the-art touchscreen monitor with Android operating system for Hikvision's 2nd generation IP video door entry systems.
• Compatible with 2nd generation IP video intercom system
• Operating system: Android
• 10.1" color TFT LCD display with a resolution 1024 x 600 p
• Operated via graphical interface UI v2.0
• Built-in speakers and microphone
• Viewing of video from door station and IP cameras
• Clear sound due to echo and noise cancellation
• Management via iVMS-4200
• Access and remote opening via iVMS-4200, Hik-Connect software
• Integration with other Hikvision devices via pre-installed Hik-Connect application
• Possibility to install 2 additional applications
• Additional features: intercom, recording of photos and voice messages
• Capturing photos during the tenant absence
• Built-in memory: 8 GB Emmc
• MicroSD slot (for future applications, currently not supported)
• 8 alarm inputs and 2 relay outputs
• Built-in Wi-Fi module 2.4 GHz (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
• Operating system: Android
• 10.1" color TFT LCD display with a resolution 1024 x 600 p
• Operated via graphical interface UI v2.0
• Built-in speakers and microphone
• Viewing of video from door station and IP cameras
• Clear sound due to echo and noise cancellation
• Management via iVMS-4200
• Access and remote opening via iVMS-4200, Hik-Connect software
• Integration with other Hikvision devices via pre-installed Hik-Connect application
• Possibility to install 2 additional applications
• Additional features: intercom, recording of photos and voice messages
• Capturing photos during the tenant absence
• Built-in memory: 8 GB Emmc
• MicroSD slot (for future applications, currently not supported)
• 8 alarm inputs and 2 relay outputs
• Built-in Wi-Fi module 2.4 GHz (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
DS-KH6320Y-WTE2 is a modern touch monitor designed to control Hikvision second-generation video intercom systems in the 2-Wire standard.
• 7" TFT LCD colour touch screen with a resolution of 1024 x 600 px
• Operation via graphical user interface UI v2.0
• Built-in speakers and microphone
• Viewing of images from the door station and IP cameras
• Clear sound thanks to echo and noise suppression
• Configuration via iVMS-4200 (v3)
• Operation, access via the cloud with iVMS-4200, Hik-Connect applications
• Additional functions: intercom, recording of photos and voice messages
• Picture capture while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 2 relay outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Power and communication using G74824 DS-KAD706Y - DC 24 V
• Functionality of IP video intercom 2nd generation
• Operation via graphical user interface UI v2.0
• Built-in speakers and microphone
• Viewing of images from the door station and IP cameras
• Clear sound thanks to echo and noise suppression
• Configuration via iVMS-4200 (v3)
• Operation, access via the cloud with iVMS-4200, Hik-Connect applications
• Additional functions: intercom, recording of photos and voice messages
• Picture capture while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 2 relay outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Power and communication using G74824 DS-KAD706Y - DC 24 V
• Functionality of IP video intercom 2nd generation
DS-KH6320Y-WTE2 is a modern touch monitor designed to control Hikvision second-generation video intercom systems in the 2-Wire standard.
• 7” color TFT LCD display with resolution of 1024 x 600 pixels
• Indoor station controlled with UI v2.0 GUI
• Built-in speakers and microphone
• Monitoring video from door/gate station and other IP cameras
• Clear sound thanks to echo and noise cancellation
• Configuration via iVMS-4200 (v3)
• Management and control via iVMS-4200 (v3) app and cloud service
• Additional functions: intercom, voice messages, saving images
• Capturing photos during the tenant absence
• Built-in memory: 128 MB
• Support for microSD cards up to 128GB
• 8 alarm inputs
• 2 relay outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Power and communication via G74824 DS-KAD706Y – 24 VDC
• 2nd-generation IP video phone/intercom functionality
• Indoor station controlled with UI v2.0 GUI
• Built-in speakers and microphone
• Monitoring video from door/gate station and other IP cameras
• Clear sound thanks to echo and noise cancellation
• Configuration via iVMS-4200 (v3)
• Management and control via iVMS-4200 (v3) app and cloud service
• Additional functions: intercom, voice messages, saving images
• Capturing photos during the tenant absence
• Built-in memory: 128 MB
• Support for microSD cards up to 128GB
• 8 alarm inputs
• 2 relay outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Power and communication via G74824 DS-KAD706Y – 24 VDC
• 2nd-generation IP video phone/intercom functionality
DS-KAD706Y is an audio, video and power distributor dedicated to work with Hikvision 2nd generation video door entry system in 2-wire system.
• Audio, video and power distributor for Hikvision 2nd generation 2-wire video door entry system
• 6 x 2-Wire interface (CH1-CH6 power supply for monitors, including CH6 power supply for door station)
• 2 x 2-Wire interface (cascade communication using DS-KAD706Y-S)
• 1 x RJ-45 10/100 Base-T (LAN connection)
• 24 VDC power supply (no power supply included)
• 6 x 2-Wire interface (CH1-CH6 power supply for monitors, including CH6 power supply for door station)
• 2 x 2-Wire interface (cascade communication using DS-KAD706Y-S)
• 1 x RJ-45 10/100 Base-T (LAN connection)
• 24 VDC power supply (no power supply included)
The set provides an excellent representation of the monitored scene and can record images at up to 4 Mpix resolution.
• 4 Sunell SN-IPR8140HCBN-B K1621 IP cameras
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
The set provides an excellent representation of the monitored scene and allows recording images with a resolution of up to 4 MP.
• 4 Sunell SN-IPR8140BYBN-B K1654 IP cameras
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
The set provides an excellent representation of the monitored scene and allows for image recording at up to 4 Mpix resolution.
• 4 Sunell SN-IPR8140BYBN-B K1654B(dark) IP cameras
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1 TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
• Sunell SN-NVR3804E1-J (III) K26304 IP recorder
• Seagate SkyHawk ST1000VX013 1 TB M89268 hard drive
• ULTIPOWER 0054af N29980 PoE switch
