EN
PL
CZ
DE
IE
HU
PT
RO
SK
Universal tool to facilitate the implementation, configuration and maintenance of CCTV systems and computer networks.
• Scratch-resistant 7" IPS touchscreen display with high brightness for operation even in sunlight
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A
The FS8114 tester is used for measuring cable continuity, measuring cable length and measuring the distance to cable damage.
• Cable types tested: UTP/STP cat. 5, 5e, 6, 7, telephone, coaxial
• Cable length measurement
• Measurement frequency: 130 kHz
• Measurement method: capacitive
• Maximum length: 2000 m
• Minimum length: 1 m
• "Find port" – quick search of the port in a network device
• Searching and testing cables in PoE mode (passive PoE)
• Pair integrity test
• Measuring voltages on individual conductors (POE)
• Transmitter voltage protection: 60 VAC / 48 VDC
• Auto-OFF function
• Battery discharge indicator
• Record of measurement results in the device memory
• Built-in visual fault locator (VFL) for optical cables
• Power: 9 V battery (included)
• Cable length measurement
• Measurement frequency: 130 kHz
• Measurement method: capacitive
• Maximum length: 2000 m
• Minimum length: 1 m
• "Find port" – quick search of the port in a network device
• Searching and testing cables in PoE mode (passive PoE)
• Pair integrity test
• Measuring voltages on individual conductors (POE)
• Transmitter voltage protection: 60 VAC / 48 VDC
• Auto-OFF function
• Battery discharge indicator
• Record of measurement results in the device memory
• Built-in visual fault locator (VFL) for optical cables
• Power: 9 V battery (included)
The FS8117 cable tester allows to test UTP/STP cables: cable quality, attenuation, length, distance to failure, short-circuit, improperly crimped connectors, Ping test, correct connection to the router, PoE voltage test, scan of active IPs in the network. Precision inductive probe – high power pair ...
• Tested cable types: CAT 5, 5e, 6, 7 twisted pair (UTP/STP), telephone, coaxial
• Cable length testing
• Function - "find port" quick port search on network devices
• Cable search and testing in PoE mode (passive PoE)
• Pair integrity test
• PoE wire voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Recording of measurement results in the device memory
• "Find port" function - quick port search in network devices
• PING test
• IP Scan
• Quick identification of the connected network port
• Cable length testing
• Function - "find port" quick port search on network devices
• Cable search and testing in PoE mode (passive PoE)
• Pair integrity test
• PoE wire voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Recording of measurement results in the device memory
• "Find port" function - quick port search in network devices
• PING test
• IP Scan
• Quick identification of the connected network port
Terminators enable detection and testing of 8 wires (ID2-ID9). They work with FORSCHER FS8117 N7051 meter.
• Number of terminators: 8
• Cable types tested: Twisted Pair Cat. 5, 5e, 6, 7 (UTP/STP)
• Identification of specific twisted pair cable
• Cable types tested: Twisted Pair Cat. 5, 5e, 6, 7 (UTP/STP)
• Identification of specific twisted pair cable
The tester is used to measure the continuity of the cabling. The device is equipped with a terminator.
• LAN cable continuity testing
• UTP, FTP and telephone cables
• RJ45 and RJ11 connectors
• UTP, FTP and telephone cables
• RJ45 and RJ11 connectors
