EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The Dahua CS4010-8ET2GT-110 is a compact, managed Layer 2 switch with PoE support, designed for use in IP surveillance systems and small to medium-sized computer networks.
• 8 × 10/100 Mb/s RJ45 PoE ports
• 2 × 10/100/1000 Mb/s RJ45 uplink ports
• PoE power budget: 110 W
• Hi-PoE: 60 W on 2 ports; ports 3–8 support PoE+ up to 30 W
• Local management (web interface), mobile app and DoLynk Care cloud
• Extend mode – PoE transmission up to 250 m (10 Mb/s)
• PoE Watchdog function automatically restarts unresponsive PoE devices
• Support for VLAN, Port Isolation, Port Mirroring, LLDP and protection against network loops
• Metal housing suitable for desktop or wall mounting.
• 2 × 10/100/1000 Mb/s RJ45 uplink ports
• PoE power budget: 110 W
• Hi-PoE: 60 W on 2 ports; ports 3–8 support PoE+ up to 30 W
• Local management (web interface), mobile app and DoLynk Care cloud
• Extend mode – PoE transmission up to 250 m (10 Mb/s)
• PoE Watchdog function automatically restarts unresponsive PoE devices
• Support for VLAN, Port Isolation, Port Mirroring, LLDP and protection against network loops
• Metal housing suitable for desktop or wall mounting.
The Dahua CS4010-8ET2GT-60 is a compact, managed Layer 2 switch with PoE support, designed for use in IP surveillance systems and small to medium-sized computer networks.
• 8 × 10/100 Mb/s RJ45 PoE ports
• 2 × 10/100/1000 Mb/s RJ45 uplink ports
• PoE power budget: 60 W
• Hi-PoE 60 W on port 1; ports 2–8 support PoE+ up to 30 W
• Local management (web interface), mobile app and DoLynk Care cloud
• Extend mode – PoE transmission up to 250 m (10 Mb/s)
• PoE Watchdog function that automatically restarts unresponsive PoE devices
• Support for VLAN, Port Isolation, Port Mirroring, LLDP and protection against network loops
• Metal housing suitable for desk or wall mounting.
• 2 × 10/100/1000 Mb/s RJ45 uplink ports
• PoE power budget: 60 W
• Hi-PoE 60 W on port 1; ports 2–8 support PoE+ up to 30 W
• Local management (web interface), mobile app and DoLynk Care cloud
• Extend mode – PoE transmission up to 250 m (10 Mb/s)
• PoE Watchdog function that automatically restarts unresponsive PoE devices
• Support for VLAN, Port Isolation, Port Mirroring, LLDP and protection against network loops
• Metal housing suitable for desk or wall mounting.
The Dahua CS4006-4ET2GT-60 is a compact, managed Layer 2 switch with PoE support, designed for use in small-scale IP surveillance systems and computer networks.
• 4 × 10/100 Mb/s RJ45 PoE ports
• 2 × 10/100/1000 Mb/s RJ45 uplink ports
• PoE power budget: 60 W
• Hi-PoE: 60 W on port 1, up to 30 W on other ports
• Local management (Web), mobile app and DoLynk Care cloud
• Extend mode – PoE transmission up to 250 m (10 Mb/s)
• PoE Watchdog function that automatically restarts frozen PoE devices
• Support for VLAN, LLDP, Port Isolation, Port Mirroring and protection against network loops
• Metal housing suitable for desk or wall mounting
• 2 × 10/100/1000 Mb/s RJ45 uplink ports
• PoE power budget: 60 W
• Hi-PoE: 60 W on port 1, up to 30 W on other ports
• Local management (Web), mobile app and DoLynk Care cloud
• Extend mode – PoE transmission up to 250 m (10 Mb/s)
• PoE Watchdog function that automatically restarts frozen PoE devices
• Support for VLAN, LLDP, Port Isolation, Port Mirroring and protection against network loops
• Metal housing suitable for desk or wall mounting
The Dahua CS4006-4ET2GT-36 is a compact, managed Layer 2 switch with PoE support, designed for use in small-scale IP surveillance systems and computer networks.
• 4 × 10/100 Mb/s RJ45 PoE ports (IEEE 802.3af/at)
• 2 × 10/100/1000 Mb/s RJ45 uplink ports
• PoE power budget 36 W, up to 30 W per port
• Local management via web interface and remote management via the DoLynk Care cloud
• Extend mode – PoE transmission up to 250 m (10 Mb/s)
• PoE Watchdog function that automatically restarts unresponsive PoE devices
• Support for IEEE 802.1Q VLAN, LLDP, Port Isolation, Port Mirroring and Loop Prevention
• Metal housing suitable for desktop or wall mounting
• 2 × 10/100/1000 Mb/s RJ45 uplink ports
• PoE power budget 36 W, up to 30 W per port
• Local management via web interface and remote management via the DoLynk Care cloud
• Extend mode – PoE transmission up to 250 m (10 Mb/s)
• PoE Watchdog function that automatically restarts unresponsive PoE devices
• Support for IEEE 802.1Q VLAN, LLDP, Port Isolation, Port Mirroring and Loop Prevention
• Metal housing suitable for desktop or wall mounting
A 5-megapixel four-system (HD-CVI, HD-TVI, AHD, CVBS) bullet camera with a built-in microphone. Hybrid illuminator.
• Camera resolution: 5 Mpix at 25 fps
• Aspect ratio: 16:9
• HD-CVI output signal, switchable to CVBS, AHD or HD-TVI via DIP switches on the cable
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Lens: 2.8 mm
• OSD menu control via the signal cable
• Built-in microphone
• Waterproof (IP67-rated) housing
• Aspect ratio: 16:9
• HD-CVI output signal, switchable to CVBS, AHD or HD-TVI via DIP switches on the cable
• Hybrid illuminator with intelligent switching (IR up to 40 m, white light up to 40 m)
• Lens: 2.8 mm
• OSD menu control via the signal cable
• Built-in microphone
• Waterproof (IP67-rated) housing
A compact 2000 VA/1200 W UPS with AVR and two 12 V/9 Ah batteries.
• Topology: Line-Interactive, approximated sine wave
• Power: 2000 VA / 1200 W
• Input voltage: 170 V … 280 V AC
• 4 CEE 7/3 (Schuko)
• Battery: 2 x 12 V / 9 Ah (replaceable)
• AVR technology – automatic voltage regulation
• Automatic restart upon restoration of mains power
• Protections: surge protection, overload protection, overcharge protection
• Operating status indicators: LEDs, audible alarm
• Switchover time: 4–8 ms
• Low noise level and compact design
• Ideal for CCTV systems, computers and network devices
• Power: 2000 VA / 1200 W
• Input voltage: 170 V … 280 V AC
• 4 CEE 7/3 (Schuko)
• Battery: 2 x 12 V / 9 Ah (replaceable)
• AVR technology – automatic voltage regulation
• Automatic restart upon restoration of mains power
• Protections: surge protection, overload protection, overcharge protection
• Operating status indicators: LEDs, audible alarm
• Switchover time: 4–8 ms
• Low noise level and compact design
• Ideal for CCTV systems, computers and network devices
WizSense 6 MPix domecamera with a 2.8 mm lens, intelligent motion detection and image analysis with person/vehicle filtering. Built-in microphone.
• Resolution: 6 MPix – 3288 × 1850 at 25 fps
• 2.8 mm fixed-focal-length lens
• Starlight technology – high sensitivity: 0.005 lx
• Hybrid illuminator with intelligent switching, featuring 2 Multi-core Light LEDs (white light and infrared illuminators) with a range of up to 30 m
• 4 illuminator operating modes (IR only, LED only, Smart – IR + LED, schedule)
• Full-colour – colour images around the clock
• Image functions: 3D-DNR, WDR, BLC, HLC
• Motion detection systems, privacy zones
• Smart events: line-crossing detection and motion detection within a zone (entry and exit)
• SMD4.0 smart motion detection (Smart Motion Detection 4.0)
• RTMP protocol, allowing audio and video streams to be sent directly to popular streaming platforms such as YouTube, Vimeo and Twitch
• 1 IN / 1 OUT audio connector for connecting a microphone / speaker
• Waterproof housing (IP67)
• Recording to a microSD card
• Power supply: 12 V DC or PoE (802.3af)
• 2.8 mm fixed-focal-length lens
• Starlight technology – high sensitivity: 0.005 lx
• Hybrid illuminator with intelligent switching, featuring 2 Multi-core Light LEDs (white light and infrared illuminators) with a range of up to 30 m
• 4 illuminator operating modes (IR only, LED only, Smart – IR + LED, schedule)
• Full-colour – colour images around the clock
• Image functions: 3D-DNR, WDR, BLC, HLC
• Motion detection systems, privacy zones
• Smart events: line-crossing detection and motion detection within a zone (entry and exit)
• SMD4.0 smart motion detection (Smart Motion Detection 4.0)
• RTMP protocol, allowing audio and video streams to be sent directly to popular streaming platforms such as YouTube, Vimeo and Twitch
• 1 IN / 1 OUT audio connector for connecting a microphone / speaker
• Waterproof housing (IP67)
• Recording to a microSD card
• Power supply: 12 V DC or PoE (802.3af)
The KTW02 kit enables you to set up an IP-based video intercom system.
• VTO2311R-WP gate station main unit
• VTH2621G-WP indoor unit
• 12V/2A DC power supply – 2 units
• VTH2621G-WP indoor unit
• 12V/2A DC power supply – 2 units
An IP camera from the budget-friendly Entry 6 Mpix range. It features the SMD+ intelligent motion detection system and a hybrid illuminator.
• 6 MPix resolution
• 2.8 mm fixed-focus lens
• Hybrid illuminator with intelligent switching and 1 Multi-core Light LED
• Full-colour – colour images 24 hours a day
• SMD+ (Smart Motion Detection+) intelligent motion detection
• Built-in microphone
• Image functions: D-WDR, 3D-DNR, BLC, HLC, corridor mode
• 2.8 mm fixed-focus lens
• Hybrid illuminator with intelligent switching and 1 Multi-core Light LED
• Full-colour – colour images 24 hours a day
• SMD+ (Smart Motion Detection+) intelligent motion detection
• Built-in microphone
• Image functions: D-WDR, 3D-DNR, BLC, HLC, corridor mode
A compact 1000 VA/600 W UPS with AVR and a 12 V/9 Ah battery.
• Topology: Line-Interactive, approximated sine wave
• Power: 1000 VA / 600 W
• Input voltage: 170 V ... 280 V AC
• 2 CEE 7/3 (Schuko)
• Battery: 12 V / 9 Ah (replaceable)
• AVR technology – automatic voltage regulation
• Automatic restart upon restoration of mains power
• Protections: surge protection, overload protection, overcharge protection
• Operating status indicators: LEDs, audible alarm
• Switchover time: 4–8 ms
• Low noise level and compact design
• Ideal for CCTV systems, computers and network devices
• Power: 1000 VA / 600 W
• Input voltage: 170 V ... 280 V AC
• 2 CEE 7/3 (Schuko)
• Battery: 12 V / 9 Ah (replaceable)
• AVR technology – automatic voltage regulation
• Automatic restart upon restoration of mains power
• Protections: surge protection, overload protection, overcharge protection
• Operating status indicators: LEDs, audible alarm
• Switchover time: 4–8 ms
• Low noise level and compact design
• Ideal for CCTV systems, computers and network devices
