The Signal NT-48 is a professional, multi-function tester designed for the installation, diagnosis and maintenance of telecommunications and IT cabling. The device combines the functions of a cable tester, cable locator, cable length measurer, Ethernet port locator and PoE tester.
• Digital cable location
• Support for UTP and STP cables
• RJ45 cable pin sequence test
• Open circuit detection
• Short circuit detection between wires
• Detection of incorrectly crossed wires
• RJ45 connector crimping check
• Cable length measurement using the TDR method
• Measurement of the length of individual pairs
• Switch or router port location
• 100 Mb/s / 1 Gb/s connection recognition
• PoE power diagnostics
• PoE voltage measurement
• Identification of pairs used for power supply
• Determination of power polarity
• Measurement of PoE power whilst under load
• Non-contact voltage detection (NCV)
• Distinguishing between live and neutral wires
• LED torch
• Support for UTP and STP cables
• RJ45 cable pin sequence test
• Open circuit detection
• Short circuit detection between wires
• Detection of incorrectly crossed wires
• RJ45 connector crimping check
• Cable length measurement using the TDR method
• Measurement of the length of individual pairs
• Switch or router port location
• 100 Mb/s / 1 Gb/s connection recognition
• PoE power diagnostics
• PoE voltage measurement
• Identification of pairs used for power supply
• Determination of power polarity
• Measurement of PoE power whilst under load
• Non-contact voltage detection (NCV)
• Distinguishing between live and neutral wires
• LED torch
A multifunctional service monitor for CCTV system installers. 7" touchscreen, compatible with all major standards.
• 7" IPS touchscreen
• 15 physical function buttons
• Support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI, CVBS, SDI
• Built-in Wi-Fi module (2.4 GHz, 5.8 GHz)
• HDMI input and output
• High-capacity 37 Wh battery providing approx. 8 hours of operation
• Video, audio, data, network, Wi-Fi and PoE signal tester
• TDR reflectometer (locates breaks in UTP cables)
• Fibre optic tester: optical power meter (OPM) and VFL (visual fault locator)
• UTP cable tester
• Digital multimeter (measures voltage, current, resistance, capacitance)
• RS-485 data analysis
• Built-in internal memory: 11 GB, supports microSD cards up to 32 GB
• Built-in torch (1 LED – 35 lm)
• Power output: DC 12 V / 2 A, PoE (802.3af/at), DC 5 V / 2 A (USB)
• 15 physical function buttons
• Support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI, CVBS, SDI
• Built-in Wi-Fi module (2.4 GHz, 5.8 GHz)
• HDMI input and output
• High-capacity 37 Wh battery providing approx. 8 hours of operation
• Video, audio, data, network, Wi-Fi and PoE signal tester
• TDR reflectometer (locates breaks in UTP cables)
• Fibre optic tester: optical power meter (OPM) and VFL (visual fault locator)
• UTP cable tester
• Digital multimeter (measures voltage, current, resistance, capacitance)
• RS-485 data analysis
• Built-in internal memory: 11 GB, supports microSD cards up to 32 GB
• Built-in torch (1 LED – 35 lm)
• Power output: DC 12 V / 2 A, PoE (802.3af/at), DC 5 V / 2 A (USB)



