English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
AXON PRO Video IP Protector is four-channel surge protector of IP CCTV systems using Ethernet 10/100/1000 Mbps networks and PoE+ technology of remote power supply. The PoE+ technology allows for supplying power to devices with higher energy consumption, such as HD cameras.
• Socket type: RJ45
• Number of paths: 4
• Protected cable wires: 1,2,3,4,5,6,7,8
• Dimensions: 167x50x32 mm
• Pass-through for PoE supply
• Number of paths: 4
• Protected cable wires: 1,2,3,4,5,6,7,8
• Dimensions: 167x50x32 mm
• Pass-through for PoE supply
D-SEP/HD is a 1-channel galvanic separator for signals transmitted via 75 ohm coaxial cable.
• Isolation between different points of the system, such as cameras and DVR
• Potential difference protection
• Signals in CVBS, AHD, HD-CVI and HD-TVI up to 8 MP.
• Potential difference protection
• Signals in CVBS, AHD, HD-CVI and HD-TVI up to 8 MP.
The device lessens the risk of damage caused by surges in power lines to TV, stereo, computer or other electronic equipment.
ACAR S8 FA RACK is designed for supplying power safely to up to eight devices mounted in a 19" rack cabinet. It provides protection against surges occurring in 230 VAC power line and has 8 outlets with grounding. The power strip is equipped with illuminated switch and automatic circuit breaker. The ...
• Number of sockets: 8
• Dimensions: 445x54x55 mm
• Maximum total output current: 10 A
• Dimensions: 445x54x55 mm
• Maximum total output current: 10 A
Acar 504 WF RACK is designed for supplying power safely to up to five devices mounted in a 19" rack cabinet. The device from Acar 504 series has 5 outlets with grounding that, thanks to application of quick varistors, ensure protection against surges occurring in 230 VAC power line. The power strip ...
• Five AC power outlets with grounding contact
• Power ON indicator (illuminated switch)
• Two fast fuses
• Quick varistors
• Efficient RFI filter
• Inflammable housing (self-extinguishing plastics)
• Ergonomic layout
• Hardware for mounting in a 19" rack cabinet
• Power ON indicator (illuminated switch)
• Two fast fuses
• Quick varistors
• Efficient RFI filter
• Inflammable housing (self-extinguishing plastics)
• Ergonomic layout
• Hardware for mounting in a 19" rack cabinet
Very useful piece of equipment when installing devices with DC 2.1/5.5 power socket. The installer has to observe proper polarity (+/-). The cable is 1.5 m long.
Quick-connect plug S-55 connects a two-wire power cable to allow a standard DC connection (2.1/5.5, for CCTV cameras).
• An easy way to connect power supply to a CCTV camera
• DC plug 2.1/5.5 mm
• Screw cable terminals
• Max voltage: 24 VDC
• DC plug 2.1/5.5 mm
• Screw cable terminals
• Max voltage: 24 VDC
Quick-connect socket G-55 connects a two-wire power cable to allow a standard DC connection (2.1/5.5).
• DC 2.1/5.5 mm socket
• Screw cable terminals
• Max. voltage 24VDC
• Screw cable terminals
• Max. voltage 24VDC
The RCA-BNC adapter is used e.g. for connecting the AUDIO output of a DVR (BNC) to an audio amplifier etc. with RCA input, via a typical RCA-RCA patch cable.
This adapter is used in audio channels, e.g. to connect AUDIO output of a DVR (BNC), via a coaxial cable, to an audio amplifier with RCA input.
