English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The 1VP-B balun (passive transformer) is designed to transmit a video signal from an unbalanced (75 ohm) video output to an unbalanced (75 ohm) video input, via a twisted pair of UTP, FTP, or STP cable, using one device on each end of the transmission line.
• Transmission of video signal via a twisted-pair cable
• PAL (CVBS): max transmission distance of 400 m,
• HD-TVI, AHD:max transmission distance of 200 m (720p) or 150 m (1080p),
• HD-CVI: max transmission distance of 200 m.
• PAL (CVBS): max transmission distance of 400 m,
• HD-TVI, AHD:max transmission distance of 200 m (720p) or 150 m (1080p),
• HD-CVI: max transmission distance of 200 m.
The 1VP-A balun (passive transformer) is designed to transmit video signal from an unbalanced (75 ohm) output to an unbalanced (75 ohm) video input, via a twisted pair of UTP, FTP, or STP cable...
The Etrix 1VP-D transformer has a BNC connector attached with a flexible cable, which ensures free positioning of the BNC end. The UTP cable is connected to a crimp connector.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP terminal connector
• BNC 75 connector placed on cable
• UTP terminal connector
The Etrix 1VP-C transformer has a BNC connector attached with a flexible cable, which ensures free positioning of the BNC end.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP screw-connector
• BNC 75 connector placed on cable
• UTP screw-connector
The ETRIX 1VAP transformer has a connector with a flexible cable BNC plug and a 2.1/5.5 socket and plug.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP RJ-45-connector
• BNC 75 connector placed on cable
• UTP RJ-45-connector
The USB extension adapter is used to connect peripheral devices to a computer or other host device with Universal Serial Bus interface with the help of a Cat5/Cat5E/Cat6 patch cable (not included). The kit consists of two units, one with USB plug type A male, the second with USB plug type A female. ...
• Can be useful in many systems
• Allows remote operation of various devices with USB port
• Range up to 50 m
• Allows remote operation of various devices with USB port
• Range up to 50 m
USB extender using UTP cable is used to connect devices with an universal serial bus.
• Allows remote operation of distant devices
• Maximum range 150 m
• Maximum range 150 m
The RV-1/2P-UHD multiplexer is designed to split signals from two sources without any loss of quality of the signal.
• Signal splitting from 1 to 2 outputs
• Input splitting configuration with jumpers
• Input splitting configuration with jumpers
The VHD-15 amplifier/repeater is designed to amplify high resolution AHD, HD-CVI or HD-TVI video signal transmitted over a long distance via a twisted-pair (UTP) or coaxial cable.
A single device compensates the attenuation of about 150 m UTP cable or 300-500 m coaxial cable (depending on the type ...
• Standard:AHD - 4 Mpx, HD-CVI - 1080p, HD-TVI - 5 Mpx, CVBS - PAL / NTSC
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
AXON PoE Multi NetProtector is designed for surge protection of devices connected to Ethernet 10/100 Mb/s networks, such as network interface cards, hubs, switches, routers etc.
• Protection of LAN segment, including PoE solutions
• Protection of IP CCTV equipment
• Protection for all four paths (pairs)
• Threshold voltages adjusted to the function of a pair (data transmission or PoE)
• For 10/100 Mbps Ethernet networks
• Protection of IP CCTV equipment
• Protection for all four paths (pairs)
• Threshold voltages adjusted to the function of a pair (data transmission or PoE)
• For 10/100 Mbps Ethernet networks
