English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The 1VP-B balun (passive transformer) is designed to transmit a video signal from an unbalanced (75 ohm) video output to an unbalanced (75 ohm) video input, via a twisted pair of UTP, FTP, or STP cable, using one device on each end of the transmission line.
• Transmission of video signal via a twisted-pair cable
• PAL (CVBS): max transmission distance of 400 m,
• HD-TVI, AHD:max transmission distance of 200 m (720p) or 150 m (1080p),
• HD-CVI: max transmission distance of 200 m.
• PAL (CVBS): max transmission distance of 400 m,
• HD-TVI, AHD:max transmission distance of 200 m (720p) or 150 m (1080p),
• HD-CVI: max transmission distance of 200 m.
The 1VP-A balun (passive transformer) is designed to transmit video signal from an unbalanced (75 ohm) output to an unbalanced (75 ohm) video input, via a twisted pair of UTP, FTP, or STP cable...
The Etrix 1VP-D transformer has a BNC connector attached with a flexible cable, which ensures free positioning of the BNC end. The UTP cable is connected to a crimp connector.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP terminal connector
• BNC 75 connector placed on cable
• UTP terminal connector
The Etrix 1VP-C transformer has a BNC connector attached with a flexible cable, which ensures free positioning of the BNC end.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP screw-connector
• BNC 75 connector placed on cable
• UTP screw-connector
The ETRIX 1VAP transformer has a connector with a flexible cable BNC plug and a 2.1/5.5 socket and plug.
• Transmission of video signal from 1 camera using UTP cable
• BNC 75 connector placed on cable
• UTP RJ-45-connector
• BNC 75 connector placed on cable
• UTP RJ-45-connector
The USB extension adapter is used to connect peripheral devices to a computer or other host device with Universal Serial Bus interface with the help of a Cat5/Cat5E/Cat6 patch cable (not included). The kit consists of two units, one with USB plug type A male, the second with USB plug type A female. ...
• Can be useful in many systems
• Allows remote operation of various devices with USB port
• Range up to 50 m
• Allows remote operation of various devices with USB port
• Range up to 50 m
USB extender using UTP cable is used to connect devices with an universal serial bus.
• Allows remote operation of distant devices
• Maximum range 150 m
• Maximum range 150 m
The RV-1/2P-UHD multiplexer is designed to split signals from two sources without any loss of quality of the signal.
• Signal splitting from 1 to 2 outputs
• Input splitting configuration with jumpers
• Input splitting configuration with jumpers
The VHD-15 amplifier/repeater is designed to amplify high resolution AHD, HD-CVI or HD-TVI video signal transmitted over a long distance via a twisted-pair (UTP) or coaxial cable.
A single device compensates the attenuation of about 150 m UTP cable or 300-500 m coaxial cable (depending on the type ...
• Standard:AHD - 4 Mpx, HD-CVI - 1080p, HD-TVI - 5 Mpx, CVBS - PAL / NTSC
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
AXON PoE Multi NetProtector is designed for surge protection of devices connected to Ethernet 10/100 Mb/s networks, such as network interface cards, hubs, switches, routers etc.
• Protection of LAN segment, including PoE solutions
• Protection of IP CCTV equipment
• Protection for all four paths (pairs)
• Threshold voltages adjusted to the function of a pair (data transmission or PoE)
• For 10/100 Mbps Ethernet networks
• Protection of IP CCTV equipment
• Protection for all four paths (pairs)
• Threshold voltages adjusted to the function of a pair (data transmission or PoE)
• For 10/100 Mbps Ethernet networks
AXON PRO Video IP Protector is four-channel surge protector of IP CCTV systems using Ethernet 10/100/1000 Mbps networks and PoE+ technology of remote power supply. The PoE+ technology allows for supplying power to devices with higher energy consumption, such as HD cameras.
• Socket type: RJ45
• Number of paths: 4
• Protected cable wires: 1,2,3,4,5,6,7,8
• Dimensions: 167x50x32 mm
• Pass-through for PoE supply
• Number of paths: 4
• Protected cable wires: 1,2,3,4,5,6,7,8
• Dimensions: 167x50x32 mm
• Pass-through for PoE supply
D-SEP/HD is a 1-channel galvanic separator for signals transmitted via 75 ohm coaxial cable.
• Isolation between different points of the system, such as cameras and DVR
• Potential difference protection
• Signals in CVBS, AHD, HD-CVI and HD-TVI up to 8 MP.
• Potential difference protection
• Signals in CVBS, AHD, HD-CVI and HD-TVI up to 8 MP.
The device lessens the risk of damage caused by surges in power lines to TV, stereo, computer or other electronic equipment.
ACAR S8 FA RACK is designed for supplying power safely to up to eight devices mounted in a 19" rack cabinet. It provides protection against surges occurring in 230 VAC power line and has 8 outlets with grounding. The power strip is equipped with illuminated switch and automatic circuit breaker. The ...
• Number of sockets: 8
• Dimensions: 445x54x55 mm
• Maximum total output current: 10 A
• Dimensions: 445x54x55 mm
• Maximum total output current: 10 A
Acar 504 WF RACK is designed for supplying power safely to up to five devices mounted in a 19" rack cabinet. The device from Acar 504 series has 5 outlets with grounding that, thanks to application of quick varistors, ensure protection against surges occurring in 230 VAC power line. The power strip ...
• Five AC power outlets with grounding contact
• Power ON indicator (illuminated switch)
• Two fast fuses
• Quick varistors
• Efficient RFI filter
• Inflammable housing (self-extinguishing plastics)
• Ergonomic layout
• Hardware for mounting in a 19" rack cabinet
• Power ON indicator (illuminated switch)
• Two fast fuses
• Quick varistors
• Efficient RFI filter
• Inflammable housing (self-extinguishing plastics)
• Ergonomic layout
• Hardware for mounting in a 19" rack cabinet
Very useful piece of equipment when installing devices with DC 2.1/5.5 power socket. The installer has to observe proper polarity (+/-). The cable is 1.5 m long.
Quick-connect plug S-55 connects a two-wire power cable to allow a standard DC connection (2.1/5.5, for CCTV cameras).
• An easy way to connect power supply to a CCTV camera
• DC plug 2.1/5.5 mm
• Screw cable terminals
• Max voltage: 24 VDC
• DC plug 2.1/5.5 mm
• Screw cable terminals
• Max voltage: 24 VDC
Quick-connect socket G-55 connects a two-wire power cable to allow a standard DC connection (2.1/5.5).
• DC 2.1/5.5 mm socket
• Screw cable terminals
• Max. voltage 24VDC
• Screw cable terminals
• Max. voltage 24VDC
The RCA-BNC adapter is used e.g. for connecting the AUDIO output of a DVR (BNC) to an audio amplifier etc. with RCA input, via a typical RCA-RCA patch cable.
This adapter is used in audio channels, e.g. to connect AUDIO output of a DVR (BNC), via a coaxial cable, to an audio amplifier with RCA input.
The F 59 MASTER E80322 male connector is manufactured exclusively for DIPOL. The features of the connector have been specially adjusted to the CAMSET (RG-59) cables.
• Dimensions suitable for CAMSET cables used e.g. in CCTV systems
• Simple and quick assembly (longitudinal compression)
• Waterproof termination of the cable and protection of a device's input (o-ring)
• Resistance to corrosion - non-ferrous metals
• Very low loss in the whole operating band
• Simple and quick assembly (longitudinal compression)
• Waterproof termination of the cable and protection of a device's input (o-ring)
• Resistance to corrosion - non-ferrous metals
• Very low loss in the whole operating band
The E8275 monolithic BNC connector is made of brass plated with nickel and is specially prepared for CAMSET/RG-59 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
• BNC Master connector for CCTV systems
• Wide operating band
• Matched to the cables of CAMSET family and RG-59 cables
• Very low loss in the whole operating band,
• Perfect matching to the transmission line within the whole operating band
• Many patented technologies
• Wide operating band
• Matched to the cables of CAMSET family and RG-59 cables
• Very low loss in the whole operating band,
• Perfect matching to the transmission line within the whole operating band
• Many patented technologies
The monolithic E8276 BNC connector is made of brass plated with nickel and is specially prepared for RG-6 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
The E8277 monolithic BNC connector is made of brass plated with nickel and is specially prepared for TRISET-113 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
The E8278 monolithic angular BNC connector is made of brass plated with nickel and is specially prepared for CAMSET/RG-59 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a lon...
• Perfectly matched to RG-59/CAMSET cables
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
The E8279 angular BNC connector is made of brass plated with nickel and is specially prepared for RG-6 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
• Perfectly matched to RG-6 cables
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
The E8284 F-female to BNC-male adapter is significantly different from the low-cost gear offered on the market. For a slightly higher price the user gets a brand product with defined characteristics. Carefully selected materials and excellent manufacturing accuracy ensure quick and reliable assembly...
Professional BNC connector.
Professional BNC connector.
Keystone Simplex SC Adapter (SX) holds single SC simplex adapter in a patch panel or socket dedicated for keystone modules.
• Dedicated for SC connectors
The ML517 power adapter allows the user to power a Hikvision DVR with 4-pin power socket from a suitable power supply unit with 2.1/5.5 plug.
The MP-6 / D microphone is designed for creating sound channel in various applications. The device has two outputs - the balanced (differential) output allows to transmit sound over longer distances via twisted pair cable, whereas unbalanced audio output can be used with coaxial cable, over shorter ...
The Hikvision DS-2FP2020 condenser microphone with built-in preamplifier is dedicated for use in CCTV systems. With omnidirectional characteristics and ambient noise cancellation technology, the pickup area is up to 70 m² and the high quality sound is clear and natural. The microphone has reverse p...
Coaxial patch cable with molded BNC connectors.
• For connection in CCTV systems
• Length: 0.5 m
• Inner conductor and screening made of copper
• Inner conductor diameter: 0.5 mm
• Length: 0.5 m
• Inner conductor and screening made of copper
• Inner conductor diameter: 0.5 mm
Cable length: 0.8 m. This patch cable is recommended for applications in CCTV systems e.g. for connection of cameras to DVRs.
• Cable for CCTV system connections
• Length 0.8 m
• Length 0.8 m
A 3 m connecting cable for mobile DVRs, terminated with a M12 socket and plug.
• Length 3m
• Connector M12
• Connector M12
A 5 m connecting cable for mobile DVRs, terminated with a M12 socket and plug.
• Length 5 m
• M12 connectors
• M12 connectors
A 10 m connecting cable for mobile DVRs, terminated with a M12 socket and plug.
• Length 10 m
• M12 connectors
• M12 connectors
A3 PVC warning board
• A3 size
• Material: PVC
• Material: PVC
A set of three stickers (300x100 mm and two 150 x 50 mm).
A set of three stickers (300x100 mm and two 150x50 mm) to be put under glass panes.
