DC Power Cable (1.5 m, with 2.1/5.5 jack)
To cart Preview

DC Power Cable (1.5 m, with 2.1/5.5 jack)

Power cable 1.5 m with DC 2.1/5.5 plug.
• Length: 1.5 m
• Flooded connector
Code: E0695
€1.07
Available
Quick-connect Plug: S-55 DC 2.1/5.5
To cart Preview

Quick-connect Plug: S-55 DC 2.1/5.5

S-55 quick-release coupling to a standard DC 2.1/5.5 camera power socket.
• DC 2.1/5.5 mm connector
• Screw cable terminals
• Maximum voltage: 24 V DC
Code: E3511
€0.27
Available
Quick-connect Socket: G-55 DC 2.1/5.5
To cart Preview

Quick-connect Socket: G-55 DC 2.1/5.5

Quick-connect socket G-55 connects a two-wire power cable to allow a standard DC connection (2.1/5.5).
• DC 2.1/5.5 mm socket
• Screw cable terminals
• Max. voltage 24 VDC
Code: E3512
€0.34
Available
RCA-male to BNC-male Adapter
To cart Preview

RCA-male to BNC-male Adapter

The RCA-BNC adapter is used e.g. for connecting the AUDIO output of a DVR (BNC) to an audio amplifier etc. with RCA input, via a typical RCA-RCA patch cable.
• RCA to BNC plug transition
Code: E5109
€0.46
Available
RCA-male to BNC-female Adapter
To cart Preview

RCA-male to BNC-female Adapter

This adapter is used in audio channels, e.g. to connect AUDIO output of a DVR (BNC), via a coaxial cable, to an audio amplifier with RCA input.
• RCA connector to BNC socket
Code: E5110
€0.50
Available
F-connector MASTER F 59 (compressed on CAMSET/RG-59)
To cart Preview

F-connector MASTER F 59 (compressed on CAMSET/RG-59)

The monolithic, nickel-plated brass F-connector is designed for RG-59 type cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family
Code: E80322
€0.38
Available
BNC Connector MASTER BNC 59 (compressed on CAMSET/RG-59)
To cart Preview

BNC Connector MASTER BNC 59 (compressed on CAMSET/RG-59)

The monolithic nickel-plated brass BNC connector is designed for RG-59/CAMSET cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
Code: E8275
€0.87
Available
BNC Connector MASTER BNC 6 (compressed on RG-6)
To cart Preview

BNC Connector MASTER BNC 6 (compressed on RG-6)

The monolithic nickel-plated brass BNC connector is designed for RG-6 cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
Code: E8276
€0.89
Available
BNC Connector MASTER BNC 113 (compressed on Triset-113)
To cart Preview

BNC Connector MASTER BNC 113 (compressed on Triset-113)

The monolithic nickel-plated brass BNC connector is designed for TRISET cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
Code: E8277
€0.89
Available
Angular BNC Connector MASTER BNC 59 (compressed on CAMSET/RG-59)
To cart Preview

Angular BNC Connector MASTER BNC 59 (compressed on CAMSET/RG-59)

The monolithic angle compression connector, made of nickel-plated brass, is designed for RG-59 type cables.
• Connector type: BNC compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
Code: E8278
€1.15
Available