EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The cable is used to connect the device to the mains. An example of its use would be the power supply of a computer.
• Length: 1.5 m
• IEC320 connector
• IEC320 connector
The cable is used to extend the power cable from the computer's power supply.
• Length: 1.5 m
• IEC C13, IEC C14 connectors
• IEC C13, IEC C14 connectors
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 2-wire, through version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 2-wire, through version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 2-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 2-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 3-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 3-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 5-wire version
• Installation of wires from 0.14 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 5-wire version
• Installation of wires from 0.14 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
The UY2 double quick-connector (Scotchlok) allows wires to be connected without stripping the insulation.
Designed for low-voltage copper cables.
Designed for low-voltage copper cables.
• Connection of 2 cable conductors
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
LZ-1 is a passive device distributing power from a single power supply source.
• Number of outputs: 8 (terminal strips)
• Number of inputs: 1 Socket 5.5/2.1
• Maximum supply current: 2,5 A
• Maximum voltage: 24 V
• Number of inputs: 1 Socket 5.5/2.1
• Maximum supply current: 2,5 A
• Maximum voltage: 24 V
The LZ-6 is a simple splitter allowing several devices to be powered from a single higher power supply. The connector splits the power supply into 6 outputs.
• Number of outputs: 6 (terminal strips)
• Number of inputs: 2 5.5/2.1 sockets, terminal blocks
• Maximum supply current: 6 A
• Maximum voltage: 24 V
• Number of inputs: 2 5.5/2.1 sockets, terminal blocks
• Maximum supply current: 6 A
• Maximum voltage: 24 V
The LZ-8/POL is a simple splitter allowing several devices to be powered from a single higher power supply. The connector splits the power supply into 8 outputs.
• Number of outputs: 8 (terminal strips)
• Number of inputs: 2 5.5/2.1 sockets, terminal blocks
• Maximum supply current: 5,6 A
• Maximum voltage: 24 V
• Number of inputs: 2 5.5/2.1 sockets, terminal blocks
• Maximum supply current: 5,6 A
• Maximum voltage: 24 V
