English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
A set of active converters for Ethernet and PoE transmission over coaxial cable, 1 channel 100 Mbps, PoE IN 802.3at/af or Passive (xCOAX3-SW), PoE OUT Passive up to 500 m.
• Transmission range over coaxial cable up to 500 m at 100 Mbps
• Noise immunity and watchdog function in COAX path
• Power supply from switch PoE 802.3at/af or PoE PASSIVE
• Power supply to receiver PoE 802. 3at/af or PoE PASSIVE receivers
up to 30 W total power in the whole power path
• Very low power consumption – 1,35 W for the entire path
• Compact modules
• Clear, optical indication of power and data transmission status
• Easy and quick startup without configuration of parameters
• Noise immunity and watchdog function in COAX path
• Power supply from switch PoE 802.3at/af or PoE PASSIVE
• Power supply to receiver PoE 802. 3at/af or PoE PASSIVE receivers
up to 30 W total power in the whole power path
• Very low power consumption – 1,35 W for the entire path
• Compact modules
• Clear, optical indication of power and data transmission status
• Easy and quick startup without configuration of parameters
ETH10-2wire-SET is a set of active converters designed for Ethernet data and PoE power transmission using only 2 wires.
• A set of converters for Ethernet data and PoE power transmission using 2 wires (e.g. one pair of UTP cable)
• Enables installation of cameras or other IP PoE devices in places where it is difficult or uneconomic to replace the existing wiring
• Power from any PoE switch or 10. ..56 V
• Maximum transmission range is 1000 m, depending on the type, length and cross-section of the cables
• Small size allows easy installation in small spaces, such as in an installation box.
• Enables installation of cameras or other IP PoE devices in places where it is difficult or uneconomic to replace the existing wiring
• Power from any PoE switch or 10. ..56 V
• Maximum transmission range is 1000 m, depending on the type, length and cross-section of the cables
• Small size allows easy installation in small spaces, such as in an installation box.
The device reduces the voltage at a DC plug to 12 V and simultaneously transfers the PoE power supply to the RJ45 output.
• PoE voltage reduction from 48V to 12V – available at a DC plug (illuminator, microphone, heater)
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
The P-POE2 Splitter allows you to connect two devices with a single UTP Cat. 5e twisted pair cable.
• Transmits power and data to two PoE IP cameras
• Uses UTP cat. 5e twisted pair cable
• Designed to work in 10/100 Mbps networks
• Uses UTP cat. 5e twisted pair cable
• Designed to work in 10/100 Mbps networks
The POE-802.3AF/C M1896 DC-DC converter provides power supply to 12 VDC devices (typically IP CCTV cameras without PoE option), converted from any PoE source (802.3af or 802.3at) distributing 44-57 VDC voltage.
The Power over Ethernet (PoE) adapter transmits power to LAN devices via quadded twisted pair cables (e.g. UTP). The application of the PoE injector is a very convenient solution e.g. when there is a need of providing power to an outdoor Access Point from a power supply located indoors.
The set includes two passive PoE devices. They are equipped with RJ-45 and 2.1/5.5mm (power) connectors, and prepared for work with majority of popular WLAN devices
The device can transmit power via Ethernet cables to 4 LAN PoE devices. It is usually used with a buffer power supply (maximum voltage 57 VDC). The injector has 2.1/5.5 DC power socket input for the power supply and a LED signaling its operation.
The adapter enables the user to power 4 network devices via Ethernet cable. The device has DC jack power input (2.1/5.5) that should be connected to a suitable DC power supply with sufficient current capacity, or the power can be distributed to PoE output ports from the LAN1 PoE in/out port (set wit...
The Gigabit Active PoE Adapter can inject power to four LAN devices via twisted-pair cable (e.g. UTP). The power injector is perfectly suited for use with devices requiring PoE supply in the 802.3af or 802.3at standard. It has a DC power socket (2.1/5.5) for connecting an external power supply, e.g....
