EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Power adapter with 5 VDC voltage and 2 A current output, equipped with USB type A connector.
• Output voltage 5 VDC
• Output current 2 A
• USB type A port
• Color: black
• Output current 2 A
• USB type A port
• Color: black
Power supply with DC 5.5/2.1 connector (polarity “+” inside) for use with devices powered by 12 VDC and maximum current consumption of 1 A.
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 1 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 1 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
Power supply with DC 5.5/2.1 connector (polarity “+” inside) for use with devices powered by 12 VDC and maximum current consumption of 2 A.
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 2 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 2 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
Power supply with a DC 5.5/2.1 plug (polarity "+" inside) for use with devices supplied with 12 V DC and a maximum current consumption of 3 A.
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 3 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 3 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
Power supply with a DC 5.5/2.1 plug (polarity "+" inside) for use with devices supplied with DC 12 V and a maximum current consumption of 5 A.
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 5 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 5 A
• Overcurrent protection
• Surge protection
• Short-circuit protection
Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with current consumption not exceeding 1A. It is suitable for the majority of CCTV cameras.
• Power supply dedicated for CCTV cameras
• 12 VDC output
• Max load: 1 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
• 12 VDC output
• Max load: 1 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
Power supply with a DC 5.5/2.1 plug (polarity "+" inside) for use with devices supplied with DC 5 V and a maximum current consumption of 1.2 A.
• Small dimensions
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant
• High power output
• No-load power consumption less than 100 mW
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant
• High power output
• No-load power consumption less than 100 mW
Power supply with a DC 5.5/2.1 plug (polarity "+" inside) for use with devices supplied with DC 5 V and a maximum current consumption of 2 A.
• Small dimensions
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant
• High power output
• No-load power consumption less than 100 mW
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant
• High power output
• No-load power consumption less than 100 mW
High-quality plug-in power supply with microUSB port, 15 W.
• Small dimensions
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant
• High power output
• No-load power consumption less than 100 mW
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant
• High power output
• No-load power consumption less than 100 mW
High-quality plug-in power supply with USB-C port with 15 W.
• Small dimensions
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant.
• High power output
• No-load power consumption less than 100 mW
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant.
• High power output
• No-load power consumption less than 100 mW
The 12 V/1.5 A PROTEC switched-mode power supply in an aesthetically pleasing splash-proof housing is suitable for external wall mounting.
• Power supply dedicated for CCTV cameras
• 12 V output voltage
• Maximum output current 1.5 A
• Output: 2.1/5.5 mm plug on cable
• Splash-proof housing for outdoor mounting under canopy
• IP53 rating
• The video cable connection can also be hidden under the cover
• 12 V output voltage
• Maximum output current 1.5 A
• Output: 2.1/5.5 mm plug on cable
• Splash-proof housing for outdoor mounting under canopy
• IP53 rating
• The video cable connection can also be hidden under the cover
Switched-mode power supply designed to power 5 VDC electronic devices equipped with 2.1/5.5 socket ("+" in the midpoint), with current consumption not exceeding 2 A.
• AC input voltage 100-240 V
• Stabilised output voltage 5 V
• Output power 11.5 W
• Current capacity 2.3 A
• Plug 2.1/5.5 on cable
• Stabilised output voltage 5 V
• Output power 11.5 W
• Current capacity 2.3 A
• Plug 2.1/5.5 on cable
Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with total current consumption not exceeding 2 A.
• AC/DC adapter dedicated for CCTV cameras
• Output voltage: 12 VDC
• Max. output current: 2 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
• Output voltage: 12 VDC
• Max. output current: 2 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
Power supply in a sealed IP67 housing with a DC 5.5/2.1 plug (polarity “+” inside).
• Power supply designed for CCTV cameras
• Output voltage: 12 V
• Maximum output current: 1.5 A
• Protection rating IP67
• Overcurrent protection
• Surge protection
• Short-circuit protection
• Output voltage: 12 V
• Maximum output current: 1.5 A
• Protection rating IP67
• Overcurrent protection
• Surge protection
• Short-circuit protection
Small, powerful 12V/0.5A plug-in power supply for universal applications with full protection and 5-year warranty.
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant.
• High power output
• No-load power consumption less than 100 mW
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant.
• High power output
• No-load power consumption less than 100 mW
Small and powerful 12V/1.5A plug-in power supply for universal applications with full protection and 5-year warranty.
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant.
• High power output
• No-load power consumption less than 100 mW
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant.
• High power output
• No-load power consumption less than 100 mW
Small, powerful 12V/2A plug-in power supply for universal applications with full protection and 5-year warranty.
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant.
• High power output
• No-load power consumption less than 100 mW
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant.
• High power output
• No-load power consumption less than 100 mW
Power supply with a DC 5.5/2.1 plug (polarity "+" inside) for use with devices supplied with 12 V DC and a maximum current consumption of 7.5 A.
• Compact, lightweight design
• No-load power consumption less than 150 mW
• 12 V output voltage
• Maximum output current 7.5 A
• Efficiency 88%
• Over-current protection
• Over-current protection
• Short-circuit protection
• No-load power consumption less than 150 mW
• 12 V output voltage
• Maximum output current 7.5 A
• Efficiency 88%
• Over-current protection
• Over-current protection
• Short-circuit protection
Small, powerful 24V/0.5A plug-in power supply for universal applications with full protection and 5-year warranty.
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant.
• High power output
• No-load power consumption less than 100 mW
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant.
• High power output
• No-load power consumption less than 100 mW
A compact, powerful 24V/1A plug-in power supply for universal applications, with full protection and a 5-year warranty.
• Compact, lightweight design
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant.
• High power output
• No-load power consumption less than 100 mW
• Reliable and efficient
• Energy Star Compliance Level VI and ErP Ecodesign compliant.
• High power output
• No-load power consumption less than 100 mW
Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with current total consumption not exceeding 5 A. It is suitable for the majority of CCTV cameras.
• AC/DC adapter dedicated for CCTV systems
• 12 VDC output
• Current capacity: 5 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
• 12 VDC output
• Current capacity: 5 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
The power supply unit is dedicated for supplying 12 VDC voltage to CCTV cameras (max total current: 1 A), from AC power network (90-264 VAC, 50-60 Hz).
PSC12015 power supply designed to supply 230 VAC power to cameras in a CCTV system requiring 12 VDC voltage.
• Power supply with 2.1/5.5 socket and cable connector for external mounting
• 12V output voltage
• Maximum output current 1.5 A
• Flush mount
• IP67
• Voltage 12 V
• 12V output voltage
• Maximum output current 1.5 A
• Flush mount
• IP67
• Voltage 12 V
The HPSDC-12V8X1A stabilised power supply is designed to supply CCTV equipment requiring a stabilised voltage of 12 V DC.
• Switching-mode power supply dedicated for CCTV cameras
• Output voltage 12 V (DC 12-15 V)
• Maximum output current 7 A
• 8 outputs with fuses of 1 A each
• Output voltage 12 V (DC 12-15 V)
• Maximum output current 7 A
• 8 outputs with fuses of 1 A each
This power supply is designed to supply CCTV devices requiring a stabilised voltage of 12 VDC.
• Power supply intended for CCTV cameras
• Pulse output voltage 12 V (DC 12 – 15 V)
• Maximum power 180 W
• 16 1 A outputs
• Pulse output voltage 12 V (DC 12 – 15 V)
• Maximum power 180 W
• 16 1 A outputs
The TRZ 80 V A /17 V /24 V /30 V series AC voltage transformer is designed to supply equipment requiring 17 V, 24 V, 30 V AC voltage.
• Power: 80 V
• Power: 230 V / 50 Hz / 0.4 A
• Output voltage: AC 17 V / 4.5 A or 24 V / 3.3 A or 30 V / 2.7 A
• Housing: PC/ABS, V-O, IP43
• Temperature fuse 130º
• Note: resin-filled transformer
• Power: 230 V / 50 Hz / 0.4 A
• Output voltage: AC 17 V / 4.5 A or 24 V / 3.3 A or 30 V / 2.7 A
• Housing: PC/ABS, V-O, IP43
• Temperature fuse 130º
• Note: resin-filled transformer
The PSCU04344SEP power supply is designed to solve the problem of long cable lengths (voltage drops).
• Power supply designed for CCTV cameras in case of long distances
• DC 34 V /4x1 A power output
• 4 independent, galvanically separated outputs protected by 1 A fuses
• LED optical indication
• DC 34 V /4x1 A power output
• 4 independent, galvanically separated outputs protected by 1 A fuses
• LED optical indication
Universal, compact 12 W plug-in power supply with adjustable voltage of 3-12 V, stable and reliable, with overload protection.
• Small dimensions
• Compact, lightweight design
• Reliable and efficient
• High power output
• Universal
• Compact, lightweight design
• Reliable and efficient
• High power output
• Universal
Universal, compact 12 W plug-in power supply with adjustable voltage of 3-12 V, stable and reliable, with overload protection.
• Small dimensions
• Compact, lightweight design
• Reliable and efficient
• High power output
• Versatile
• Compact, lightweight design
• Reliable and efficient
• High power output
• Versatile
Industrial switching power supply 15 W, 12 V with DIN rail mounting: high efficiency, stable and continuous operation, full protection, voltage regulation.
• Small dimensions
• Adjustable output voltage 11-13 V via potentiometer
• LED indicator
• Based on high quality electronic components
• Comprehensively protected
• Low surge current
• Perforated housing
• Adjustable output voltage 11-13 V via potentiometer
• LED indicator
• Based on high quality electronic components
• Comprehensively protected
• Low surge current
• Perforated housing
Industrial switch-mode power supply 24 W, 12 V with DIN rail mounting: high efficiency, stable and continuous operation, full protection, voltage regulation.
• Small dimensions
• Adjustable output voltage 11.4-12.6V via potentiometer
• LED indicator
• Based on high quality electronic components
• Comprehensively protected
• Low surge current
• Perforated housing
• Adjustable output voltage 11.4-12.6V via potentiometer
• LED indicator
• Based on high quality electronic components
• Comprehensively protected
• Low surge current
• Perforated housing
24 W, 24 V industrial switching power supply with DIN rail mounting: high efficiency, stable and continuous operation, full protection, voltage regulation.
• Small dimensions
• Adjustable output voltage of 23-25V by potentiometer
• LED indicator
• Based on high quality electronic components
• Comprehensively protected
• Low surge current
• Perforated housing
• Adjustable output voltage of 23-25V by potentiometer
• LED indicator
• Based on high quality electronic components
• Comprehensively protected
• Low surge current
• Perforated housing
Industrial switch-mode power supply 54 W with DIN rail mounting: high efficiency, stable and continuous operation, full protection, adjustable output voltage.
• Small dimensions
• High power output
• Based on high-end electronic components
• Comprehensively protected
• Low surge current
• Trimmer
• Perforated housing
• LED indicator
• Double output terminals
• High power output
• Based on high-end electronic components
• Comprehensively protected
• Low surge current
• Trimmer
• Perforated housing
• LED indicator
• Double output terminals
60 W, 24 V industrial switching power supply with DIN rail mounting: high efficiency, stable and continuous operation, full protection, voltage regulation.
• Small dimensions
• High power output
• Based on high-end electronic components
• Comprehensively protected
• Low surge current
• Trimmer
• Perforated housing
• LED indicator
• Double output terminals
• High power output
• Based on high-end electronic components
• Comprehensively protected
• Low surge current
• Trimmer
• Perforated housing
• LED indicator
• Double output terminals
A leak-proof, 6 W power supply with very small dimensions.
• Small dimensions
• IP67 enclosure
• Reliable and efficient
• High efficiency
• Compliant with standards
• Safe source of energy
• Easy to install
• IP67 enclosure
• Reliable and efficient
• High efficiency
• Compliant with standards
• Safe source of energy
• Easy to install
A sealed box power supply with 30W and very small dimensions.
• Small dimensions
• IP67 enclosure
• Reliable and efficient
• High efficiency
• Compliant with standards
• Safe source of energy
• Easy to install
• IP67 enclosure
• Reliable and efficient
• High efficiency
• Compliant with standards
• Safe source of energy
• Easy to install
The ZBF-12-4A-17 Ah buffer power supply is designed for uninterrupted supply to devices requiring stabilised voltage of 12 V DC (10-5-13.8 V).
• 9.5-13.8 V output voltage
• Separate battery charging path and consumer power path
• Battery charging current 1 A / 4 A, jumper selectable
• Dedicated battery 17 - 18 Ah
• High efficiency (74%)
• Separate battery charging path and consumer power path
• Battery charging current 1 A / 4 A, jumper selectable
• Dedicated battery 17 - 18 Ah
• High efficiency (74%)
Buffer power supply 13.8 V DC / 2.5 A, high efficiency, LED, space for 7 Ah battery, charge control and protection.
• Interruptible power supply DC 13.8 V 2A + 0.5 A charging
• Space for battery up to 7 Ah
• High efficiency (up to 90%)
• Charge and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
• Space for battery up to 7 Ah
• High efficiency (up to 90%)
• Charge and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
Buffer power supply 13.8 V DC / 3.5 A, high efficiency, LED, space for 7 Ah battery, charge control and protection.
• Interruptible DC 13.8 V 3 A +0.5 A charge battery slot up to 7 Ah
• Battery slot for up to 7 Ah battery
• High efficiency (up to 90%)
• Control of battery charging and maintenance
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
• Battery slot for up to 7 Ah battery
• High efficiency (up to 90%)
• Control of battery charging and maintenance
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
Buffer power supply 13.8 V DC / 3.5 A, high efficiency, LED, space for 17 Ah battery, charge control and protection.
• 13.8 V 3 A DC power supply + 0.5 A charging
• Battery storage capacity up to 17 Ah
• High efficiency (up to 90%)
• Charging and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
• Battery storage capacity up to 17 Ah
• High efficiency (up to 90%)
• Charging and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
Buffer power supply 13.8 V DC / 5.5 A, high efficiency, LED, space for 17 Ah battery, charge control and protection.
• Interruptible DC 13.8 V 4.5/4 A + 0.5/1 A charge
• Space for battery up to 17 Ah
• High efficiency (up to 90%)
• Charge and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
• Space for battery up to 17 Ah
• High efficiency (up to 90%)
• Charge and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
Buffer power supply 13.8 V DC / 7A, high efficiency, LED, space for 17 Ah battery, charge control and protection.
• Interruptible DC 13.8 V 6/5 A power supply + 1/2 A charging
• Space for batteries up to 17 Ah
• High efficiency (up to 90%)
• Charging and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
• Space for batteries up to 17 Ah
• High efficiency (up to 90%)
• Charging and battery maintenance monitoring
• Jumper selectable battery charging current (models with selectable charging current)
• LED visual indication
Buffer power supply 13.8 V DC, 8×1 A, according to EN50131-6 and EN60839.
• High efficiency - up to 86%
• 8 x 1A outputs
• Battery charging current selectable via jumper
• Compliance with EN 50131-6:2017 for intrusion detection systems (IDS), in grades 1 and 2 and environmental class II
• Compliance with EN 60839-11-2:2015+AC:2015 for access control (KD) systems and environmental class I
• Protection of the battery against over-discharge (UVP)
• START function - manual activation of power supply from the battery
• LED visual indication
• Dynamic battery test
• Battery circuit continuity check
• 8 x 1A outputs
• Battery charging current selectable via jumper
• Compliance with EN 50131-6:2017 for intrusion detection systems (IDS), in grades 1 and 2 and environmental class II
• Compliance with EN 60839-11-2:2015+AC:2015 for access control (KD) systems and environmental class I
• Protection of the battery against over-discharge (UVP)
• START function - manual activation of power supply from the battery
• LED visual indication
• Dynamic battery test
• Battery circuit continuity check
Universal 12/24 V buffer module to ensure continuity of power supply to the vehicle's equipment and to protect the main battery from discharge.
• Possibility to build a buffer system in vehicle installations
• Maintains equipment in operation when the engine is switched off without the risk of discharging the main battery
• Automatic power supply detection minimising interference with the vehicle's electrical installation.
• Supports 12 V and 24 V systems
• Power output up to 140 W (for 24 V / 24 V configuration)
• Clear LED indication of operating mode and battery level
• Wide operating temperature range: -25°C to +65°C
• Maintains equipment in operation when the engine is switched off without the risk of discharging the main battery
• Automatic power supply detection minimising interference with the vehicle's electrical installation.
• Supports 12 V and 24 V systems
• Power output up to 140 W (for 24 V / 24 V configuration)
• Clear LED indication of operating mode and battery level
• Wide operating temperature range: -25°C to +65°C
SWS-60 PoE switch power supply system designed to supply PoE switches with 48 - 53 V DC, 60 W power.
• High efficiency: 90%
• Enclosure: metal, white color (RAL 9003)
• Removable universal mounting plate for quick installation and removal of PoE switches
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Surge protection
• Tamper protection (detection of opening the case)
• Enclosure: metal, white color (RAL 9003)
• Removable universal mounting plate for quick installation and removal of PoE switches
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Surge protection
• Tamper protection (detection of opening the case)
The SWB-60 buffer power supply system is designed for uninterruptible power supply of PoE switches with 52 VDC.
• High efficiency (83%)
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• START button to start the power supply from the battery
• Lightning indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection - protection against opening the housing, against reverse battery connection
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• START button to start the power supply from the battery
• Lightning indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection - protection against opening the housing, against reverse battery connection
The ULTIPOWER power supply is used to supply power to devices using PoE technology.
• Standard 802.3af
Powering devices via PoE
1x PoE port, 1x LAN port
PoE 802.3af standard - max. power 15.4 W
• Powering devices via PoE
• 1x PoE port, 1x LAN port
• PoE 802.3af standard - max. power 15.4 W
• 1x PoE port, 1x LAN port
• PoE 802.3af standard - max. power 15.4 W
The SWB-120 buffer power supply system is designed for uninterruptible power supply of PoE switches with 52 VDC.
• High efficiency (87%)
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• START button to start the power supply from the battery
• Lightning indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• Metal housing in white (RAL 9003)
• Demountable universal mounting plate
• START button to start the power supply from the battery
• Lightning indication
• Short-circuit (SCP), overload (OLP), overvoltage (OVP), overvoltage (OVP, overvoltage), tamper protection
SWS-150 PoE switch power supply system designed to supply PoE switches with 48 - 53 V DC, 150 W power.
• High efficiency: 85%
• Enclosure: metal, white color (RAL 9003)
• Removable universal mounting plate for quick installation and removal of PoE switches
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Tamper protection (detection of opening the case)
• Enclosure: metal, white color (RAL 9003)
• Removable universal mounting plate for quick installation and removal of PoE switches
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Tamper protection (detection of opening the case)
The ULTIPOWER power supply is used to supply power to devices using PoE technology.
• Standard 802.3at
A Power supply system for PoE switches with 120 W of power in an ABS enclosure with an IP56 rating.
• High efficiency: 85%
• ABS enclosure with IP56 rating
• Glands allow free cable routing
• Post mountable (requires OZB-4 adapter)
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Surge protection
• Tamper protection (enclosure opening detection)
• ABS enclosure with IP56 rating
• Glands allow free cable routing
• Post mountable (requires OZB-4 adapter)
• Short-circuit protection (SCP)
• Overload protection (OLP)
• Overvoltage protection (OVP)
• Surge protection
• Tamper protection (enclosure opening detection)
Buffer power supply system for uninterruptible power supply of PoE switches with 52 V housed in an IP44-rated ABS enclosure.
• High efficiency (83%)
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• ABS enclosure – IP44
• Fitted cable glands allow free cable routing
• Post mountable (requires OZB-4 adapter)
• Demountable universal mounting plate
• Start button to start the power supply from the battery
• Optical indication
• Battery over-discharge protection
• Short circuit protection (SCP), overload protection (OLP), over voltage protection (OVP, overvoltage protection, tamper protection
• Battery charging and maintenance control
• Built-in DC/DC converter reducing system cost and stabilizing output voltage, regardless of battery charge
• Battery over-discharge protection
• Battery charging current: 0.5 A
• ABS enclosure – IP44
• Fitted cable glands allow free cable routing
• Post mountable (requires OZB-4 adapter)
• Demountable universal mounting plate
• Start button to start the power supply from the battery
• Optical indication
• Battery over-discharge protection
• Short circuit protection (SCP), overload protection (OLP), over voltage protection (OVP, overvoltage protection, tamper protection
• Standard 802.3af/at
• Ports 10/100/1000 Mbps
• Ports 10/100/1000 Mbps
The switched-mode power supply is designed to power 52 VDC electronic devices equipped with 2.1/5.5 sockets ("+" in the midpoint), with current consumption up to 1.15 A.
• Power output: 1.15 A/52 V DC
• Efficiency: 90%
• Energy class: V
• Protections: SCP, OLP
• Operation indication: LED
• Efficiency: 90%
• Energy class: V
• Protections: SCP, OLP
• Operation indication: LED
Equipped with a PoE adapter, the ULTIPOWER supply is dedicated for powering devices using PoE technology (max. power: 65 W).
• Maximum power 65 W
• Compatible with IEEE802.3at/af standard
• Compatible with IEEE802.3at/af standard
The power supply is used to supply power to devices using PoE technology.
• 48 V output voltage
• Maximum output current 500 mA
• Maximum output current 500 mA
Switch-mode power supply 24 V DC/1 A integrated in the PoE injector. For supplying e.g. the RouterBoard.
• 230 V AC / 24 V DC 1 A
The power supply is used to supply power to network devices, control systems and automation equipment for which stabilised DC voltage is required.
• 85...264 V AC or 120...373 V DC / 21.6...28.8 V DC 4.5 A
The MDR-60-48 switched-mode power supply has been specially designed to power industrial switches.
• 100...240 V AC / 48 V DC 1.25 A
• DIN rail mounting
• DIN rail mounting
The MDR-100-48 switched-mode power supply has been specially designed for powering industrial switches, control systems and automation equipment.
• 100...240 VAC/48 VDC, 2 A
• DIN rail mounting
• DIN rail mounting
