EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
An antenna for receiving and transmitting signals in the 800-3000 MHz band. It has a gain of 9 dBi and is equipped with a 10 m cable terminated with an SMA connector.
• 800-3000 MHz band
• 9 dBi gain
• VSWR <1.7
• Impedance 50 ohm
• Directional antenna
• Cable 10 m
• SMA connector angular
• 9 dBi gain
• VSWR <1.7
• Impedance 50 ohm
• Directional antenna
• Cable 10 m
• SMA connector angular
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-male - SMA-male
• Connector length: 0.5 m
• Connector length: 0.5 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-male - SMA-male
• Connector length: 1 m
• Connector length: 1 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-male- SMA-male
• Connector length: 2 m
• Connector length: 2 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-plug - N-plug
• Connector length: 15 m
• Connector length: 15 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-plug - N-plug
• Connector length: 1 m
• Connector length: 1 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• SMA - SMA connector
• Connector length 5 m
• Connector length 5 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• SMA connector - SMA socket
• Connector length 10 m
• Connector length 10 m
An antenna for receiving and transmitting signals in the 380-2700 MHz band. It has up to 7 dBi gain and is equipped with a 12 cm cable terminated with an N connector.
• External, panel, directional
• Zero-band: 380-698/698-960/1710-2700 MHz
• Working on networks: GSM, DCS, UMTS, WLAN, LTE
• Gain:
3 dBi ( 380-698 MHz)
4 dBi (698-960 MHz)
7dBi (1710-2700 MHz)
• Low VSWR <2.5
• 12 cm cable terminated with N socket
• Housing made of ABS plastic resistant to UV radiation and weather conditions
• Mast fitting with U-shaped fasteners
• Adjustable inclination of the antenna in relation to the mast 0-90^o^^
• Can be mounted to vertical and horizontal pipe
• Zero-band: 380-698/698-960/1710-2700 MHz
• Working on networks: GSM, DCS, UMTS, WLAN, LTE
• Gain:
3 dBi ( 380-698 MHz)
4 dBi (698-960 MHz)
7dBi (1710-2700 MHz)
• Low VSWR <2.5
• 12 cm cable terminated with N socket
• Housing made of ABS plastic resistant to UV radiation and weather conditions
• Mast fitting with U-shaped fasteners
• Adjustable inclination of the antenna in relation to the mast 0-90^o^^
• Can be mounted to vertical and horizontal pipe
Omnidirectional antenna for receiving and transmitting signals in the 450 MHz band. It has a gain of up to 3.6 dBi.
• Bandwidth 430-490 MHz
• Gain up to 3.6 dBi
• VSWR <2,5
• Impedance 50 Ω
• Omnidirectional antenna
• N-connectors
• Gain up to 3.6 dBi
• VSWR <2,5
• Impedance 50 Ω
• Omnidirectional antenna
• N-connectors
The eight-way splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the 670 - 3800 MHz band.
• Number of outputs: 8
• Bandwidth 670-3800 MHz
• Attenuation: 12 dB
• Connectors: N-sockets
• Bandwidth 670-3800 MHz
• Attenuation: 12 dB
• Connectors: N-sockets
Antenna for receiving and transmitting signals in the 698-2700 MHz band. Gain 9.5 dBi.
• Frequency range 698-2700 MHz
• Gain: 9.5 dBi
• VSWR <1.5
• Impedance 50 Ohm
• Directional antenna
• Cable length: 5 m
• SMA connectors
• Gain: 9.5 dBi
• VSWR <1.5
• Impedance 50 Ohm
• Directional antenna
• Cable length: 5 m
• SMA connectors
Precision pliers made of stainless steel for exceptionally accurate cutting of stranded cable conductors and more.
• Precision pliers made of stainless steel for cutting stranded copper conductors of max. fi Ø 1.3 mm or AWG 16
• Precision pliers made of stainless steel for extremely fine cutting of stranded wire conductors
• Sanded, extra sharp cutting edges for flat cutting
• Not intended for cutting steel wires
• Blades separately induction hardened
• Hinge with stainless steel rivet
• Spring to open and limit opening
• Colour: red
• Packaging: blister
• Arms length: 115 mm
• Slip-resistant handles
• Precision pliers made of stainless steel for extremely fine cutting of stranded wire conductors
• Sanded, extra sharp cutting edges for flat cutting
• Not intended for cutting steel wires
• Blades separately induction hardened
• Hinge with stainless steel rivet
• Spring to open and limit opening
• Colour: red
• Packaging: blister
• Arms length: 115 mm
• Slip-resistant handles
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Allows connection of external antenna to GPRS/UMTS/LTE modem
An antenna for receiving and transmitting signals in the 698-3800 MHz band. It has a gain of 9 dBi and is equipped with a 20 m cable terminated with an SMA connector.
• Band 698-3800 MHz
• Gain 9 dBi
• VSWR <1.83
• Impedance 50 Ω
• MIMO Directional Antenna
• 20 m Cable
• SMA Connectors
• Gain 9 dBi
• VSWR <1.83
• Impedance 50 Ω
• MIMO Directional Antenna
• 20 m Cable
• SMA Connectors
An antenna for receiving and transmitting signals in the 698-3800 MHz band. It has a gain of 9 dBi and is equipped with a 15 m cable terminated with an SMA connector.
• Band 698-3800 MHz
• Gain 9 dBi
• VSWR <1.83
• Impedance 50 Ω
• MIMO Directional Antenna
• 15 m cable
• SMA connectors
• Gain 9 dBi
• VSWR <1.83
• Impedance 50 Ω
• MIMO Directional Antenna
• 15 m cable
• SMA connectors
BNC connector designed for H155 coaxial cable with an impedance of 50 Ω.
• For H155 cable
• Impedance 50 ohms
• Impedance 50 ohms
![Antenna TRANS-DATA 5G KYZ 10/10 + 10 m cable + SMA [698-960, 1710-2700, 3300-3800 MHz]](https://www.dipol.com.pl/img/thumbnails/a741027_10+.jpg/23e1022d0a70db2f40008a8f70510d30.jpg)
Antenna for receiving and transmitting signals in the 698-3800 MHz band. It has 11 dBi gain and is equipped with a 10 m cable terminated with an SMA connector.
• Frequency range 698-3800 MHz
• Gain: 9,5 dBi (698-960 MHz), 10,5 dBi (1710-2700 MHz), 11 dBi (3300-3800 MHz)
• VSWR <1.9
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 10 m
• SMA connectors
• Gain: 9,5 dBi (698-960 MHz), 10,5 dBi (1710-2700 MHz), 11 dBi (3300-3800 MHz)
• VSWR <1.9
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 10 m
• SMA connectors
![Antenna TRANS-DATA LTE KYZ 10/10 + 5 m cable + SMA [698-960, 1710-2700 MHz]](https://www.dipol.com.pl/img/thumbnails/a741024_5+.jpg/779211fdd42643819c4d80763db0398c.jpg)
An antenna for receiving and transmitting signals in the 698-2700 MHz band. It has a gain of 10 dBi and is equipped with a 5 m cable terminated with an SMA connector.
• Frequency range 698-2700 MHz
• Gain: 10 dBi
• VSWR <2
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 5 m
• SMA connectors
• Gain: 10 dBi
• VSWR <2
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 5 m
• SMA connectors
Antenna for receiving and transmitting signals in the 698-2700 MHz band. Gain 9.5 dBi.
• Frequency range 698-2700 MHz
• Gain: 9.5 dBi
• VSWR <1.5
• Impedance 50 Ohm
• Directional antenna
• Cable length: 10 m
• SMA connectors
• Gain: 9.5 dBi
• VSWR <1.5
• Impedance 50 Ohm
• Directional antenna
• Cable length: 10 m
• SMA connectors
Antenna for receiving and transmitting signals in the 698-3800 MHz band. It has 11 dBi gain and is equipped with a 10 m cable terminated with an SMA connector.
• Frequency range 698-3800 MHz
• Gain: 9,5 dBi (698-960 MHz), 10,5 dBi (1710-2700 MHz),11 dBi (3300-3800 MHz)
• VSWR <1.9
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 5 m
• SMA connectors
• Gain: 9,5 dBi (698-960 MHz), 10,5 dBi (1710-2700 MHz),11 dBi (3300-3800 MHz)
• VSWR <1.9
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 5 m
• SMA connectors
![Antenna TRANS-DATA LTE KYZ 10/10 + 20 m cable + SMA [698-960, 1710-2700 MHz]](https://www.dipol.com.pl/img/thumbnails/a741024+.jpg/12f877def26a46ff8c0f1301832fe613.jpg)
Antenna for receiving and transmitting signals in the 698-2700 MHz band. It has 10 dBi gain and is equipped with a 10 m cable terminated with an SMA connector.
• Frequency range 698-2700 MHz
• Gain: 10 dBi
• VSWR <2
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 20 m
• SMA connectors
• Gain: 10 dBi
• VSWR <2
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 20 m
• SMA connectors
Antenna for receiving and transmitting signals in the 617-3800 MHz band. It has 9 dBi gain and is equipped with a 30 cm cable terminated with an N type connector
• Band: 617-3800 MHz
• Gain max. 9 dBi
• VSWR <2.0
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 30 cm
• N connector
• Gain max. 9 dBi
• VSWR <2.0
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 30 cm
• N connector
The TRANS-DATA DZ7 DW4-A is an internal omnidirectional antenna designed to improve the 5G/LTE signal reception.
• Indoor, omnidirectional antenna
• Broadband 617-960, 1650-2700, 3300-4200, 4800-6000 MHz
• Gain 4-6 dBi
• Low VSWR <1.9
• Ideal for LTE/ 5G repeaters
• Broadband 617-960, 1650-2700, 3300-4200, 4800-6000 MHz
• Gain 4-6 dBi
• Low VSWR <1.9
• Ideal for LTE/ 5G repeaters
1-metre long USB-C to micro USB cable for charging and data transfer between electronic devices.
• Length 1 m
• Connector A: USB-C
• Connector B: Micro USB
• USB 2.0 standard
• Connector A: USB-C
• Connector B: Micro USB
• USB 2.0 standard
Omnidirectional antenna for receiving and transmitting signals in the 617-4200 MHz band. Gain 5 dBi.
• Frequency range 617-4200 MHz
• Gain up to 5 dBi
• VSWR <2.5
• Impedance 50 ohm
• Omi directional antenna
• SMA connectors
• Gain up to 5 dBi
• VSWR <2.5
• Impedance 50 ohm
• Omi directional antenna
• SMA connectors
Omnidirectional antenna for receiving and transmitting signals in the 698-2700 MHz band. Gain 8 dBi.
• Frequency range 698-2700 MHz
• Gain: 8 dBi
• VSWR <2
• Impedance 50 Ω
• Omi directional antenna
• N connector
• Gain: 8 dBi
• VSWR <2
• Impedance 50 Ω
• Omi directional antenna
• N connector
The connector connects an external antenna to a GPRS/UMTS/LTE modem in order to amplify the signal from the mobile operator.
• Length 20 cm
• For connecting GPRS/UMTS/LT antennas
• For connecting GPRS/UMTS/LT antennas
