EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The eight-way splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the 670 - 3800 MHz band.
• Number of outputs: 8
• Bandwidth 670-3800 MHz
• Attenuation: 12 dB
• Connectors: N-sockets
• Bandwidth 670-3800 MHz
• Attenuation: 12 dB
• Connectors: N-sockets
Antenna for receiving and transmitting signals in the 698-2700 MHz band. Gain 9.5 dBi.
• Frequency range 698-2700 MHz
• Gain: 9.5 dBi
• VSWR <1.5
• Impedance 50 Ohm
• Directional antenna
• Cable length: 5 m
• SMA connectors
• Gain: 9.5 dBi
• VSWR <1.5
• Impedance 50 Ohm
• Directional antenna
• Cable length: 5 m
• SMA connectors
Antenna for receiving and transmitting signals in the 698-2700 MHz band. Gain 9.5 dBi.
• Frequency range 698-2700 MHz
• Gain: 9.5 dBi
• VSWR <1.5
• Impedance 50 Ohm
• Directional antenna
• Cable length: 10 m
• SMA connectors
• Gain: 9.5 dBi
• VSWR <1.5
• Impedance 50 Ohm
• Directional antenna
• Cable length: 10 m
• SMA connectors
The TRANS-DATA DZ7 DW4-A is an internal omnidirectional antenna designed to improve the 5G/LTE signal reception.
• Indoor, omnidirectional antenna
• Broadband 617-960, 1650-2700, 3300-4200, 4800-6000 MHz
• Gain 4-6 dBi
• Low VSWR <1.9
• Ideal for LTE/ 5G repeaters
• Broadband 617-960, 1650-2700, 3300-4200, 4800-6000 MHz
• Gain 4-6 dBi
• Low VSWR <1.9
• Ideal for LTE/ 5G repeaters
The DC 12 V WT48-1203000-T power adapter is designed to supply GDW series GSM amplifiers. It comes with a 2 m cable with a DIN4 plug.
• 100...230 V AC / 12 V DC 3 A
• 2 m cable
• DIN4 connector
• 2 m cable
• DIN4 connector
The Signal GDW-505 repeater amplifies GSM/3G/LTE signals inside buildings. The indoor coverage area is up to 500 sqm
• Operating band: GSM, LTE, DCS, 3G
• Gain: 60/65 dB
• Max. output power: 15 dBm
• Indoor coverage area up to 500 sqm
• Automatic gain/level control (AGC/ALC)
• Manual gain control (MGC)
• Meets the requirements of ETSI 303 609-4
• Easy installation (Plug and Play)
• Device status display
• Gain: 60/65 dB
• Max. output power: 15 dBm
• Indoor coverage area up to 500 sqm
• Automatic gain/level control (AGC/ALC)
• Manual gain control (MGC)
• Meets the requirements of ETSI 303 609-4
• Easy installation (Plug and Play)
• Device status display
The DC 9 V power supply is designed to supply power to GSM repeaters (A6765, A6775, A6785). It is equipped with a 1 m cable with a 2.1/5.5 mm plug.
• 100...230 V AC / 9 V DC 3 A
The antenna is used for receiving and transmitting signals in the 800-980 MHz band. It has a gain of 12.8 dBi and is equipped with a 10 m cable terminated with an N connector.
• Bandwidth 800-980 MHz
• Gain 12.8 dBi
• VSWR <1,8
• Impedance 50 Ω
• Directional antenna
• Cable 10 m
• N-connector
• Gain 12.8 dBi
• VSWR <1,8
• Impedance 50 Ω
• Directional antenna
• Cable 10 m
• N-connector
The antenna is used for receiving and transmitting signals in the 800-980 MHz band. It has a gain of 12 dBi.
• Bandwidth 800-980 MHz
• Gain 12.8 dBi
• VSWR <1,8
• Impedance 50 Ω
• Directional antenna
• Gain 12.8 dBi
• VSWR <1,8
• Impedance 50 Ω
• Directional antenna
The tap distributes amplified GSM/DSC/UMTS/LTE signals to indoor antennas A741001, A741002. Operating band: 800...2500 MHz; connectors: N-f.
• Breakthrough attenuation <1 dB
• Branch attenuation 12 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1.4
• Connectors: N-sockets
• Branch attenuation 12 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1.4
• Connectors: N-sockets
