EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The GSM taps are used to distribute the previously amplified GSM signal to the indoor antennas. Branch attenuation 8 dB.
• Transit attenuation <1.3 dB
• Branch attenuation 8 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
• Branch attenuation 8 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
The GSM taps are used to distribute the previously amplified GSM signal to the indoor antennas. Branch attenuation 5 dB.
• Transit attenuation <2.2 dB
• Branch attenuation 5 dB
• Inter output isolation >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
• Branch attenuation 5 dB
• Inter output isolation >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
The four-way GSM splitter is used to distribute the amplified signal to the indoor antennas. The splitter operates in the 800-2500 MHz band.
• Number of outputs: 4
• Bandwidth 800-2500 MHz
• Assurance: 6.6 dB
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• Assurance: 6.6 dB
• Connectors: N-sockets
Omnidirectional antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 7 dBi.
• Band 806-2500 MHz
• Gain 7 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• N-connector
• Gain 7 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• N-connector
Antenna for receiving and transmitting signals in the 698-2700 MHz band. It has a gain of 10 dBi.
• Bandwidth 698-2700 MHz
• Gain of 10 dBi
• VSWR <1.5
• Impedance 50 ohm
• Directional antenna
• N-connector
• Gain of 10 dBi
• VSWR <1.5
• Impedance 50 ohm
• Directional antenna
• N-connector
Antenna for receiving and transmitting signals in the 698-2700 MHz band. It has a gain of 9.5 dBi.
• Bandwidth 698-2700 MHz
• Gain 9.5 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• Cable 20 cm
• N connectors
• Gain 9.5 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• Cable 20 cm
• N connectors
Protector used to protect GSM amplifiers against surges.
• Maximum power 200 W
• VSWR <1.1
• 0.2 dB attenuation
• VSWR <1.1
• 0.2 dB attenuation
Omnidirectional antenna for receiving and transmitting signals in the 890-1990 MHz band. It has a gain of 5 dBi and is equipped with a 2.8 m cable terminated with an FME connector.
• Bandwidth 890-1990 MHz
• 5 dBi gain
• VSWR <2
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 2.8 m
• FME connector
• 5 dBi gain
• VSWR <2
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 2.8 m
• FME connector
The Signal GSM-1205 repeater is used to amplify the GSM signal and introduce it indoors. The amplification area is approximately 1,200 m².
• Band 880-915, 925-960 MHz (GSM+EGSM)
• Gain: 70/70 dB
• Maximum output power: 20 dBm
• Interior coverage area up to 1200 m²
• Automatic gain control (AGC, ALC)
• Manual gain control (MGC)
• Complies with ETSI standard 303 609-4
• Certified by the Institute of Communications
• Easy to install (Plug and Play)
• Gain: 70/70 dB
• Maximum output power: 20 dBm
• Interior coverage area up to 1200 m²
• Automatic gain control (AGC, ALC)
• Manual gain control (MGC)
• Complies with ETSI standard 303 609-4
• Certified by the Institute of Communications
• Easy to install (Plug and Play)
Signal GSM-305 A6765 repeater amplifies the GSM signal and distributes it inside buildings. The amplification coverage is approx. 300 sqm.
• Operating band 880-915, 925-960 MHz (GSM+EGSM)
• Gain: 60/60 dB
• Max. output power: 10 dBm
• Indoor coverage area up to 300 square meters
• AGC (ALC) - automatic gain/level control
• MGC - manual gain control
• Compliance with ETSI 303 609-4
• Easy installation (Plug and Play)
• Gain: 60/60 dB
• Max. output power: 10 dBm
• Indoor coverage area up to 300 square meters
• AGC (ALC) - automatic gain/level control
• MGC - manual gain control
• Compliance with ETSI 303 609-4
• Easy installation (Plug and Play)
