EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 9.5 dBi.
• Band 806-2500 MHz
• Gain 9.5 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• Cable 20 cm
• N connectors
• Gain 9.5 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• Cable 20 cm
• N connectors
Antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 10 dBi.
• Band 806-2500 MHz
• 10 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• Directional antenna
• N-connector
• 10 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• Directional antenna
• N-connector
An omnidirectional antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 3 dBi and is equipped with a 15 cm cable terminated with an SMA R/P connector.
• Band 806-2500 MHz
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• SMA R/P connector
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• SMA R/P connector
An omnidirectional antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 3 dBi and is equipped with a 15 cm cable terminated with an N connector.
• Band 806-2500 MHz
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• N-connector
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• N-connector
The GSM three-way splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the 800-2500 MHz band.
• Number of outputs: 3
• Bandwidth 800-2500 MHz
• Assumption 5.5 dB
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• Assumption 5.5 dB
• Connectors: N-sockets
The two-way GSM splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the frequencies 800-2500 MHz.
• Number of outputs: 2
• Bandwidth 800-2500 MHz
• 3.5 dB attenuation
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• 3.5 dB attenuation
• Connectors: N-sockets
The antenna is used for receiving and transmitting signals in the 800-980 MHz band. It has a gain of 16.5 dBi and is equipped with a 10 m cable terminated with an N connector.
• Band 800-980 MHz
• Gain 16,5 dBi
• Impedance 50 Ω
• Directional antenna
• Cable 10 m
• N connector
• Gain 16,5 dBi
• Impedance 50 Ω
• Directional antenna
• Cable 10 m
• N connector
The antenna is used for receiving and transmitting signals in the 800-980 MHz band. It has a gain of 16.5 dBi.
• Band: 800-980 MHz
• Gain: 16,5 dBi
• Impedance: 50 Ω
• Directional antenna
• Gain: 16,5 dBi
• Impedance: 50 Ω
• Directional antenna
