Fiber optics is becoming a dominant transmission medium in many branches of telecommunications systems. They are increasingly used not only by telecommunication operators but also by TV/SAT++ and CCTV++ contractors.
In our fiber optic cables range we offer both single mode optical fibers and multimode optical fibers. Single mode fibers are used in all types of installations and will always be a good, future proof choice. Multimode fibers, due to their design, can be used in systems in difficult environmental conditions. The cables must be used with matching (fiber standard and connector type) pigtails, adapters and patchcords.
The fiber optic systems section also offers active devices for Ethernet transmission through the fiber optics: media converters and SFP modules.
Fiber optic splicers allow to quickly make fiber optic joints. The fiber optic splicing range, apart from fiber optic splicers also includes a number of accessories such as: strippers, cutters, blades and splice shields.
Signal Fire AI-9 is a splicer that has a built-in optical power meter and VFL visual fault locator.
• Built-in power meter and visual fault locator
• 6 motors responsible for positioning the fiber
• Positioning to the core or to the fiber sheath
• Auto mode
• Image magnification x300
• 4-core processor for speed
• Min. splicing time of 6 seconds
• Fast heating – it takes 15 s to splice a 40 mm splice sheath
• Configuration via phone app (Android/iOS)
• Large (5.1'') display with adjustable brightness
• Possibility to create welding reports via dedicated app (export to xls)
• Metal housing covered with rubber underneath
• About 240 welding and splicing cycles from one charge
• Battery charging time – about 3.5 h
• Vast set of accessories.
Code: L5875
€878.71
€1255.29
- 30%
Previous lowest price: €1141.41
Available

The Signal Fire S-06 L5882 fiber optic cleaver ensures maximum ease of use while maintaining the highest repeatability of cutting.
• Universal blade for cutting optical fibers
• Fibers in the coating from 250 μm to 900 μm
• Fibers in the 125 μm primary coating
• 3 mm flat cables/patch cables
• Cutting length: 10-20 mm
• Replaceable 16 position blade
Code: L5882
€142.35
Available

The blade is intended for the Signal Fire S-06 L5882 cleaver.
Code: L5883
€25.88
Available

Li-Ion rechargeable battery for Signal Fire AI-9 L5875 AI-8 L5870 and AI-7 L5880 fusion splicers. The 7800 mAh capacity of the fully charged battery allows for performing ca. 200 splices. The battery is easily replaceable by the user (no need to open the splicer).
Code: L5884
 
Ask for price

Set of electrodes for Signal Fire beginning with AI-7. The set enables the user to perform about 3000 splices. The replacement procedure is described in the user manuals of the splicers.
Code: L5885
€119.06
Available

Mechanical splices ULTIMODE FAST-MS1 are used for permanent connections of optical fibers without the need of employing traditional fusion splicers. Low loss at the level of 0.1 dB is obtained thanks to advanced positioning of the fiber end faces by V-shaped grooves.
• Mechanical splice for optical fibers with buffer coating diameters of 250 μm and 900 μm
• Suitable for single-mode and multimode optical fibers
• The time needed to perform the operation is about 60 seconds
• Low loss: approx. 0.15 dB
• The set consists of 5 pieces
Code: L5550
€8.15
Available

Heat-shrinkable tubing for 0.25 mm or 0.9 mm optical fibers, used for strengthening and protecting fusion splices.
Code: L5554
€0.09
Available

Heat-shrinkable tubing for 0.25 mm or 0.9 mm optical fibers, used for strengthening and protecting fusion splices.
Code: L5554_100
€5.44
Available

Heat-shrinkable tubing for 0.25 mm or 0.9 mm optical fibers, used for strengthening and protecting fusion splices.
Code: L5555
€0.09
Available

Heat-shrinkable tubing for 0.25 mm or 0.9 mm optical fibers, used for strengthening and protecting fusion splices.
Code: L5555_100
€5.28
Available