EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The TELCOLINE GFP-6R fibre-optic splice case is designed for connecting microtubes in micro-ducts. The unit has 6 circular ports for inserting microtubes, conduits, cable bundles, etc.
• Can be buried directly in the ground
• Material: ABS
• Number of ports: 6
• Range of diameters for inserted components: 10–48 mm
• Protection rating: IP67
• Material: ABS
• Number of ports: 6
• Range of diameters for inserted components: 10–48 mm
• Protection rating: IP67
The GRANDWAY FHO3100-D32 reflectometer is a device used to measure reflectance, estimate attenuation and analyse events in an optical transmission path.
• Wavelength 1310/1550 nm
• Dynamic range 32/30 dB
• 6.2-inch touchscreen
• Power meter, light source, VFL
• Capable of testing copper cabling
• Torch
• Can be operated via a smartphone or tablet
• Dynamic range 32/30 dB
• 6.2-inch touchscreen
• Power meter, light source, VFL
• Capable of testing copper cabling
• Torch
• Can be operated via a smartphone or tablet
The Signal Fire AI-12 is a fibre-optic splicer which, thanks to its advanced camera and optical system, enables the most precise positioning of optical fibres.
• 4-year warranty from an Authorised Distributor
• Advanced camera and optical system
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the fibre core or cladding
• Touchscreen
• Auto mode capability
• 320x image magnification
• 4-core processor ensuring fast performance
• Minimum fusion time of 6 seconds
• Fast heating element – sealing a 40 mm fusion sleeve takes 15 seconds
• Configuration via a mobile app (Android/iOS)
• Large (5.1-inch) display with adjustable brightness
• Ability to generate splicing reports using a dedicated app (export to XLS)
• Metal casing with rubberised underside
• Approximately 260 sealing and splicing cycles on a single charge
• Battery charging time – approximately 3.5 hours
• Extensive range of accessories
• Advanced camera and optical system
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the fibre core or cladding
• Touchscreen
• Auto mode capability
• 320x image magnification
• 4-core processor ensuring fast performance
• Minimum fusion time of 6 seconds
• Fast heating element – sealing a 40 mm fusion sleeve takes 15 seconds
• Configuration via a mobile app (Android/iOS)
• Large (5.1-inch) display with adjustable brightness
• Ability to generate splicing reports using a dedicated app (export to XLS)
• Metal casing with rubberised underside
• Approximately 260 sealing and splicing cycles on a single charge
• Battery charging time – approximately 3.5 hours
• Extensive range of accessories
The Signal Fire MC-16 is a multifunctional tool designed to work with optical fibres.
• Multifunctional tool to work with optical fibres
• Cleaving optical fibres before splicing
• Stripping of optical fibres from 900 μm and 250 μm sheaths
• Fibre cleaning
• Peeling of 2-3 mm patchcords
• Cutting of cables and their components with kevlar blades
• Cleaving optical fibres before splicing
• Stripping of optical fibres from 900 μm and 250 μm sheaths
• Fibre cleaning
• Peeling of 2-3 mm patchcords
• Cutting of cables and their components with kevlar blades
Signal Fire AI-9 is a splicer that has a built-in optical power meter and VFL visual fault locator.
• 4-year Authorised Distributor warranty
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the core or to the fibre jacket
• Touch screen
• Auto mode capability
• Image magnification x300
• 4-core processor for high speed operation
• Minimum welding time of 6 seconds
• Fast oven - welding a 40 mm weld sheath takes 15 seconds
• Configuration via phone app (Android/iOS)
• Large (5.1'') display with adjustable brightness
• Possibility to create welding reports with the dedicated application (export to xls)
• Metal casing with rubber coating underneath
• Approximately 240 welding and welding cycles per charge
• Battery charging time of approx. 3.5 h
• Comprehensive set of accessories
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the core or to the fibre jacket
• Touch screen
• Auto mode capability
• Image magnification x300
• 4-core processor for high speed operation
• Minimum welding time of 6 seconds
• Fast oven - welding a 40 mm weld sheath takes 15 seconds
• Configuration via phone app (Android/iOS)
• Large (5.1'') display with adjustable brightness
• Possibility to create welding reports with the dedicated application (export to xls)
• Metal casing with rubber coating underneath
• Approximately 240 welding and welding cycles per charge
• Battery charging time of approx. 3.5 h
• Comprehensive set of accessories
The REC-109 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 2xQUATRO + radio/DVB-T2.
• 2xQUATRO + radio/DVB-T2 type output
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
The TR-901 SIGNAL PRO optical transmitter is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 2xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (2 satellite positions) and radio/DVB-T2 signals
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
SIGNAL PRO optical transmitter TR-501 is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 1xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (1 satellite position) and radio/DVB-T2 signals
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
• Input type 1xQUATRO + radio/DVB-T2
• Compatible with QUAD or QUATRO converter
• Output power 4 x +3 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control stabilising signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-105 receivers
The REC-105 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 1xQUATRO + radio/DVB-T2.
• Output type 1xQUATRO + radio/DVB-T2
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-501 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1550-1570 nm
• Conversion of optical signal to full band 1x SAT IF (VL/VH/HL/HH) in QUATRO circuit and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
Optical splitter used to split an optical signal into 2 paths.
• Split signal into 2 tracks
• SC/APC sockets
• BOX type housing
• Attenuation max. 4,1 dB
• SC/APC sockets
• BOX type housing
• Attenuation max. 4,1 dB
Optical splitter used to split an optical signal into 3 paths.
• Signal division into 3 paths
• SC/APC sockets
• BOX type housing
• Attenuation max. 6,4 dB
• SC/APC sockets
• BOX type housing
• Attenuation max. 6,4 dB
Optical splitter used to split an optical signal into 4 paths.
• Split signal on 4 tracks
• SC/APC sockets
• BOX type housing
• Attenuation max. 7,4 dB
• SC/APC sockets
• BOX type housing
• Attenuation max. 7,4 dB
Optical splitter used to split an optical signal into 8 tracks.
• Signal division into 8 tracks
• SC/APC sockets
• BOX type housing
• Attenuation max. 10,5 dB
• SC/APC sockets
• BOX type housing
• Attenuation max. 10,5 dB
The fibre optic cable designed for installation directly into the ground. The cable has an HDPE sheath with high crush resistance (4000 N). Cables in this sheath are also characterised by resistance to low temperatures.
• 8 G.652D fibres
• HDPE sheath and construction allowing the cable to be laid directly in the ground
• Crush resistance 4000 N
• UV resistant
• Maximum tensile strength 1200 N
• 2 FRP rods
• Central tube filled with hydrophobic gel
• HDPE sheath and construction allowing the cable to be laid directly in the ground
• Crush resistance 4000 N
• UV resistant
• Maximum tensile strength 1200 N
• 2 FRP rods
• Central tube filled with hydrophobic gel
Knife designed for longitudinal cutting of round cables with a diameter of 4 to 6 mm. Particularly suitable for hard sheathed cables such as DAC cables. Will also work well for peeling ADSS cables, universal cables, etc.
• To remove outer jacket and sheath from cables
• Cable diameter: 4 - 6 mm
• Replaceable two blades
• High build quality (aluminium)
• Adjustment to cable diameter
• Adjustment to sheath thickness
• Cable diameter: 4 - 6 mm
• Replaceable two blades
• High build quality (aluminium)
• Adjustment to cable diameter
• Adjustment to sheath thickness
![Spare blades for NF-DAC5 tool [15 pcs]](https://www.dipol.com.pl/img/thumbnails/l5930+.jpg/090c282a30b0f36f5a0dabc4264c0933.jpg)
Spare blades for the NF-DAC5 tool.
• For the NF-DAC5 stripper
The Ultimode F125 is a tool designed for cleaning fibre optic connectors. Its design allows cleaning of both sockets and connectors.
• Cleaning of connector ferrules: LC, E2000
• Approximately 750 cleaning cycles
• Approximately 750 cleaning cycles
The Ultimode F250 is a tool designed for cleaning fibre optic connectors. Its design allows cleaning of both sockets and connectors.
• Cleaning of connector ferrules: SC, FC, ST
• Approximately 750 cleaning cycles
• Approximately 750 cleaning cycles
The ULTIMODE PC-3304D-3 patchcord is a section of multimode fibre optic cable with a length of 3 metres terminated with LC connectors.
The Sendun 9C+ fibre optic cutter is used in the preparation of fibres for thermal splicing. The robust design ensures high precision and repeatable cuts.
• Solid construction
• 24-position blade with auto-rotation mechanism
• Fibre cuttings bin
• Plastic case included
• 24-position blade with auto-rotation mechanism
• Fibre cuttings bin
• Plastic case included
Lithium-ion battery designed for the Sendun SD-9+ L5877 splicing machine. The battery capacity is 7200 mAh.
• Purpose - Senun SD-9+ splicer
• Capacity 7200 mAh
• LED charging indicator
• Capacity 7200 mAh
• LED charging indicator
A compact Gigabit Ethernet-SFP converter with a wide supply voltage range of 12-58 V.
• 10/100/1000 autonegotiation on LAN port + PoE
• Power supply via screw connector (Vin) wide input voltage range
• Easy and quick commissioning without configuring parameters
• Very low power consumption (< 1.5 W)
• Small module size
• Power supply via screw connector (Vin) wide input voltage range
• Easy and quick commissioning without configuring parameters
• Very low power consumption (< 1.5 W)
• Small module size
Optical fibre switch, designed to be mounted on a DIN rail (TH35, TS35, DIN-3), allowing up to 6 SC duplex adapters to be installed.
• DIN rail mounting (TH35)
• Space for 6 SC duplex adapters
• Supports 12 splices
• Colour: grey
• Space for 6 SC duplex adapters
• Supports 12 splices
• Colour: grey
OPTISteel 1U 12xSC simplex / LC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 12 or 24 fibre terminations.
• Front panel for 12 SC simplex / LC duplex adapters
• Material: 1 mm thick steel
• Powder coated (black colour)
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 12xSC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows the implementation of 24 fibre optic fibre terminations.
• Front panel for 12 SC duplex adapters
• Material: 1 mm thick steel
• Powder coated (black colour)
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 24xSC simplex / LC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 24 or 48 fibre terminations.
• Front panel for 24 SC simplex / LC duplex adapters
• Material: 1 mm thick steel
• Powder coated (black colour)
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 24xSC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 48 fibre terminations.
• Front panel for 24 SC duplex adapters
• Material: 1 mm thick steel
• Powder coated (black colour)
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 12xSC simplex / LC duplex drop-out fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 12 or 24 fibre terminations.
• Front panel for 12 SC simplex / LC duplex adapters
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 12xSC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows the implementation of 24 fibre optic fibre terminations.
• Front panel for 12 SC duplex adapters
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 24xSC simplex / LC duplex drop-out fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 24 or 48 fibre terminations.
• Front panel for 24 SC simplex / LC duplex adapters
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
