EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The AI-5 PRO is the entry-level model in Signal Fire's extensive range of splicing machines.
• 6 motors responsible for fibre positioning
• Positioning to the core or to the fibre cladding
• Auto mode possible
• Image magnification x300
• Min. splicing time 8 seconds
• Fast oven - it takes 18 s to heat and shrink a 40 mm splice protective sleeve
• Configuration via phone app (Android/iOS)
• Settable software lock of the splicer
• Large (5'') display with adjustable brightness
• Possibility to create splice reports with a dedicated application (export to xls)
• Metal casing with rubber coating underneath.
• LED lamp
• High-capacity (5200 mAh, approx. 160 splicing and heating cycles), replaceable battery
• Battery charging time of approx. 3 h
• Universal fibre holders
• Practical carrying case included
• Full set of accessories
• Positioning to the core or to the fibre cladding
• Auto mode possible
• Image magnification x300
• Min. splicing time 8 seconds
• Fast oven - it takes 18 s to heat and shrink a 40 mm splice protective sleeve
• Configuration via phone app (Android/iOS)
• Settable software lock of the splicer
• Large (5'') display with adjustable brightness
• Possibility to create splice reports with a dedicated application (export to xls)
• Metal casing with rubber coating underneath.
• LED lamp
• High-capacity (5200 mAh, approx. 160 splicing and heating cycles), replaceable battery
• Battery charging time of approx. 3 h
• Universal fibre holders
• Practical carrying case included
• Full set of accessories
Signal Fire AI-9 is a splicer that has a built-in optical power meter and VFL visual fault locator.
• 4-year Authorised Distributor warranty
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the core or to the fibre jacket
• Touch screen
• Auto mode capability
• Image magnification x300
• 4-core processor for high speed operation
• Minimum welding time of 6 seconds
• Fast oven - welding a 40 mm weld sheath takes 15 seconds
• Configuration via phone app (Android/iOS)
• Large (5.1'') display with adjustable brightness
• Possibility to create welding reports with the dedicated application (export to xls)
• Metal casing with rubber coating underneath
• Approximately 240 welding and welding cycles per charge
• Battery charging time of approx. 3.5 h
• Comprehensive set of accessories
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the core or to the fibre jacket
• Touch screen
• Auto mode capability
• Image magnification x300
• 4-core processor for high speed operation
• Minimum welding time of 6 seconds
• Fast oven - welding a 40 mm weld sheath takes 15 seconds
• Configuration via phone app (Android/iOS)
• Large (5.1'') display with adjustable brightness
• Possibility to create welding reports with the dedicated application (export to xls)
• Metal casing with rubber coating underneath
• Approximately 240 welding and welding cycles per charge
• Battery charging time of approx. 3.5 h
• Comprehensive set of accessories
The Signal Fire AI-12 is a fibre-optic splicer which, thanks to its advanced camera and optical system, enables the most precise positioning of optical fibres.
• 4-year warranty from an Authorised Distributor
• Advanced camera and optical system
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the fibre core or cladding
• Touchscreen
• Auto mode capability
• 320x image magnification
• 4-core processor ensuring fast performance
• Minimum fusion time of 6 seconds
• Fast heating element – sealing a 40 mm fusion sleeve takes 15 seconds
• Configuration via a mobile app (Android/iOS)
• Large (5.1-inch) display with adjustable brightness
• Ability to generate splicing reports using a dedicated app (export to XLS)
• Metal casing with rubberised underside
• Approximately 260 sealing and splicing cycles on a single charge
• Battery charging time – approximately 3.5 hours
• Extensive range of accessories
• Advanced camera and optical system
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the fibre core or cladding
• Touchscreen
• Auto mode capability
• 320x image magnification
• 4-core processor ensuring fast performance
• Minimum fusion time of 6 seconds
• Fast heating element – sealing a 40 mm fusion sleeve takes 15 seconds
• Configuration via a mobile app (Android/iOS)
• Large (5.1-inch) display with adjustable brightness
• Ability to generate splicing reports using a dedicated app (export to XLS)
• Metal casing with rubberised underside
• Approximately 260 sealing and splicing cycles on a single charge
• Battery charging time – approximately 3.5 hours
• Extensive range of accessories
The Sendun SD-9+ fibre optic splicer is designed for splicing optical fibres. It uses position-to-core technology with an auto-focus function.
• 4-year Authorised Distributor Warranty
• 6 motors for fibre positioning
• 4-core processor for speed of operation
• Positioning to the core or to the fibre jacket
• Can operate in Auto mode or one of 41 presets
• Built-in optical power meter and visual fault locator VFL
• Image magnification x380
• Motor speed
• Min. splicing time 5 seconds
• Min. time to weld 40 mm weld shield is 11 seconds
• 4.3'' touchscreen display
• 7200 mAh battery allowing an average of 320 welding + sealing cycles
• Electrode life of approx. 5,000 splices
• Universal fibre holders
• Practical, capacious case
• Rich set of accessories
• Guillotine with autorotation function
• Menu in English or Polish
• 6 motors for fibre positioning
• 4-core processor for speed of operation
• Positioning to the core or to the fibre jacket
• Can operate in Auto mode or one of 41 presets
• Built-in optical power meter and visual fault locator VFL
• Image magnification x380
• Motor speed
• Min. splicing time 5 seconds
• Min. time to weld 40 mm weld shield is 11 seconds
• 4.3'' touchscreen display
• 7200 mAh battery allowing an average of 320 welding + sealing cycles
• Electrode life of approx. 5,000 splices
• Universal fibre holders
• Practical, capacious case
• Rich set of accessories
• Guillotine with autorotation function
• Menu in English or Polish
The Signal Fire MC-16 is a multifunctional tool designed to work with optical fibres.
• Multifunctional tool to work with optical fibres
• Cleaving optical fibres before splicing
• Stripping of optical fibres from 900 μm and 250 μm sheaths
• Fibre cleaning
• Peeling of 2-3 mm patchcords
• Cutting of cables and their components with kevlar blades
• Cleaving optical fibres before splicing
• Stripping of optical fibres from 900 μm and 250 μm sheaths
• Fibre cleaning
• Peeling of 2-3 mm patchcords
• Cutting of cables and their components with kevlar blades
The F1-6000 cutter is designed for fast and accurate cutting of fibres with 125 µm jacket diameter and 250/900 µm coverage.
• Easy to use - no adjustment required
• Ceramic blade
• Graduated scale (2 to 20 mm)
• Ceramic blades designed for 6000 operations
• Ceramic blade
• Graduated scale (2 to 20 mm)
• Ceramic blades designed for 6000 operations
The Miller MSAT-5 stripper is a tool designed to make indentations in cable tubes and sheaths without disturbing the optical fibres.
• Applicable for tubes with five diameters, from 1.9 mm to 3.0 mm
• Safe for optical fibers
• Safe for optical fibers
Knife designed for longitudinal cutting of round cables with a diameter of 4 to 6 mm. Particularly suitable for hard sheathed cables such as DAC cables. Will also work well for peeling ADSS cables, universal cables, etc.
• To remove outer jacket and sheath from cables
• Cable diameter: 4 - 6 mm
• Replaceable two blades
• High build quality (aluminium)
• Adjustment to cable diameter
• Adjustment to sheath thickness
• Cable diameter: 4 - 6 mm
• Replaceable two blades
• High build quality (aluminium)
• Adjustment to cable diameter
• Adjustment to sheath thickness
The ULTIMODE OPM-20T-V01 optical power meter is a device used to check the attenuation of the optical path of single- and multimode fibre optic networks.
• InGaAS detector
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
The TM103N L5815 optical power meter is designed to measure optical power loss in multimode and single-mode fiber-optic networks.
• Small, easy to use
• InGaAS detector
• 850, 1300, 1310, 1490, 1550, 1625 nm
• SC connector, FC adapter
• Possibility to measure relative or absolute power level
• Measurement range: -50...+26 dBm
• Reference measurement function
• Battery power supply 3x AAA
• InGaAS detector
• 850, 1300, 1310, 1490, 1550, 1625 nm
• SC connector, FC adapter
• Possibility to measure relative or absolute power level
• Measurement range: -50...+26 dBm
• Reference measurement function
• Battery power supply 3x AAA
The TM102N-SM L5819 optical laser source is a tool necessary for measuring optical power loss in fiber-optic networks (FTTx).
• Beam generation with a wavelength of 1310 nm or 1550 nm
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• Battery power supply 3x AAA
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• Battery power supply 3x AAA
The GRANDWAY FHP2B04 optical power meter is a device for checking the optical path attenuation of single- and multimode optical fibre networks.
• Memory for up to 999 measurements
• 850, 1300, 1310, 1490, 1550, 1625 nm
• InGaAS detector
• Possibility to measure relative or absolute power level
• Powered by rechargeable batteries via power supply
• Auto shut-off function
• 850, 1300, 1310, 1490, 1550, 1625 nm
• InGaAS detector
• Possibility to measure relative or absolute power level
• Powered by rechargeable batteries via power supply
• Auto shut-off function
The TM102N-SM L5819 optical laser source is a tool necessary for attenuation measurements of optical path in networks based on multimode fibres.
• Generated wavelength: 850 nm or 1300 nm
• Output power: -7.0 dBm
• AUTO-OFF function when no activity is detected
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
• Output power: -7.0 dBm
• AUTO-OFF function when no activity is detected
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
The GRANDWAY FHS1D02 light source is an essential tool for measuring optical path attenuation in FTTx networks.
• Beam generation with a wavelength of 1310 nm or 1550 nm
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• 4x AAA battery power supply
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• 4x AAA battery power supply
The GRANDWAY FHS2Q01F light source is an essential tool for measuring optical path attenuation in FTTx networks.
• For multi mode and single mode fiber based networks
• Generated wavelength: 850 nm, 1300 nm, 1310 nm or 1550 nm
• Output power: -5.0 dBm
• Simple and intuitive operation
• Generated wavelength: 850 nm, 1300 nm, 1310 nm or 1550 nm
• Output power: -5.0 dBm
• Simple and intuitive operation
ULTIMODE OR-20-S3S5-iSMV is a device designed for measuring and diagnosing optical fibre connections. It combines the functions of: an OTDR, optical power meter, light source and visual fault locator.
• OTDR+OPM+OLS+VFL+LED
• Reflectometer and fibre optic connection tester
• 3.5 inch screen with multi-touch function (touch screen)
• User-friendly interface similar to smartphone interface
• Measurement at 1310 nm and 1550 nm wavelengths
• Light source and power meter function for transmission measurements
• Detailed analysis of the entire optical path of up to 80 km
• Assistance in verification of events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to create measurement reports pdf/xls
• Reflectometer and fibre optic connection tester
• 3.5 inch screen with multi-touch function (touch screen)
• User-friendly interface similar to smartphone interface
• Measurement at 1310 nm and 1550 nm wavelengths
• Light source and power meter function for transmission measurements
• Detailed analysis of the entire optical path of up to 80 km
• Assistance in verification of events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to create measurement reports pdf/xls
OTDR ULTIMODE OR-30-S3S5S62B-iSMV is a device designed for measuring and diagnosing optical fibre connections.
• OTDR+OPM+OLS+VFL+LED
• Reflectometer and fibre optic connection tester
• 5-inch screen with multi-touch functionality (touchscreen)
• User-friendly interface similar to that of a smartphone
• Measurement at wavelengths 1310 nm, 1550 nm, 1625 nm
• Dynamics 32/30 dB
• Light source and power meter function for transmission measurements
• Visual VFL fault locator for basic optical line diagnostics
• Detailed analysis of the entire optical path up to 80 km long
• Assistance in verification of events and faults: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to verify "Pass/Fail"
• Possibility to create measurement reports pdf/xls
• Function of twisted pair cable tester and copper cable identification
• Reflectometer and fibre optic connection tester
• 5-inch screen with multi-touch functionality (touchscreen)
• User-friendly interface similar to that of a smartphone
• Measurement at wavelengths 1310 nm, 1550 nm, 1625 nm
• Dynamics 32/30 dB
• Light source and power meter function for transmission measurements
• Visual VFL fault locator for basic optical line diagnostics
• Detailed analysis of the entire optical path up to 80 km long
• Assistance in verification of events and faults: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to verify "Pass/Fail"
• Possibility to create measurement reports pdf/xls
• Function of twisted pair cable tester and copper cable identification
ULTIMODE VFL-V3-15 visual fault locator is designed to diagnose problems with fibre optic cabling. It emits visible light with a wavelength of 650 nm (red), which, when introduced into the fibre, escapes at excessive bends or fractures.
• Generated light with a wavelength of 650 nm
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester
The TR-901 SIGNAL PRO optical transmitter is used for the transmission of RTV/SAT signals using optical fibre technology. Input type 2xQUATRO + radio/DVB-T2.
• Conversion of DVB-S/S2 (2 satellite positions) and radio/DVB-T2 signals
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
• Input type: 2xQUATRO + radio/DVB-T2
• Compatible with QUAD and QUATRO LNBs
• Output power: 8 x +5 dBm
• Connector type SC/APC
• WDM technology (all signals in 1 fibre)
• AGC - automatic gain control to stabilise the signal level
• LEDs for easy diagnostics
• Single-mode fibre optic transmission
• Maximum signal splitting up to 16 QUATRO REC-109 receivers
The REC-109 optical receiver enables the conversion of the optical signal from the TR-901 transmitter into an electrical signal. Output type 2xQUATRO + radio/DVB-T2.
• 2xQUATRO + radio/DVB-T2 type output
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
• Compatible with TR-901 SIGNAL PRO optical transmitter
• Built-in AGC circuit, which ensures signal stability at the output of the device
• Supported wavelengths: 1330-1570 nm
• Conversion of optical signal to full bandwidth 2x SAT IF (VL/VH/HL/HH) in QUATRO system and radio/DVB-T2 signals
• High noise immunity and stable operation over a wide input power range
• High sensitivity for multi-point installations
• SC/APC optical connector
![Indoor Flat Cable WHITE (2xG.657A1, limited bending radius) [1000 m]](https://www.dipol.com.pl/img/thumbnails/l7102b+.jpg/72bad4dd3287308d14f82de884ee459c.jpg)
The L7102B fibre optic cable is a flat duplex cable, i.e. a dual-fibre fibre optic cable for indoor applications.
• Lightweight but resistant to mechanical damage
• 2 single-mode fibres
• Fibres in G.657A1 standard with reduced bending radius
• Easy to process without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: white
• 2 single-mode fibres
• Fibres in G.657A1 standard with reduced bending radius
• Easy to process without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: white
2-fibre subscriber cable in B2ca sheath – ideal for installation in multi-family housing and other facilities with duplex connections.
• Lightweight, but resistant to mechanical damage
• 2 single-mode fibres
• Fibers in G.657A1 standard with reduced bending radius
• Easy processing without the need for dedicated tools
• LSOH sheath
• CPR class: B2ca
• Color: white
• 2 single-mode fibres
• Fibers in G.657A1 standard with reduced bending radius
• Easy processing without the need for dedicated tools
• LSOH sheath
• CPR class: B2ca
• Color: white
![Self-supporting Universal FTTx Cable: SM 2J 9/125 (2x G.657A2, LSOH, black) [1000 m]](https://www.dipol.com.pl/img/thumbnails/l7102_1000+++.jpg/f415cbd25e0e56ab9d93b3ab372aa54c.jpg)
ULTIMODE FC.E-2SM is a universal fiber optic cable in LSOH jacket, so it can be used outdoors and indoors.
• Very convenient to install
• 2 single-mode fibres
• Fibres in G.657A2 standard with reduced bending radius
• Easily processed without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: black
• 2 single-mode fibres
• Fibres in G.657A2 standard with reduced bending radius
• Easily processed without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: black
