EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Holder for Sendun SD-9+ splicing machine. Allows the splicing of SOC (Splice On Connecor) type connectors.
• Material: plastic
• For mounting on Sendun SD-9+ splicer
• For SOC SC and FC connectors
• For mounting on Sendun SD-9+ splicer
• For SOC SC and FC connectors
Lithium-ion battery designed for the Sendun SD-9+ L5877 splicing machine. The battery capacity is 7200 mAh.
• Purpose - Senun SD-9+ splicer
• Capacity 7200 mAh
• LED charging indicator
• Capacity 7200 mAh
• LED charging indicator
![Fiber Optic Mechanical Splice: ULTIMODE FAST-MS1 [5 pcs.]](https://www.dipol.com.pl/img/thumbnails/l5550+.jpg/1db49b3ea49f13233b6edd5261cb36a7.jpg)
ULTIMODE FAST MS-1 mechanical splices enable permanent fibre connections to be made without the use of fibre splicers.
• Ideal for CCTV installations based on optical fibres
• For optical fibres with diameters of 250 μm and 900 μm
• For single mode and multimode fibres.
• Average attenuation of splices: approx. 0.15 dB
• In pack of 5 pieces
• For optical fibres with diameters of 250 μm and 900 μm
• For single mode and multimode fibres.
• Average attenuation of splices: approx. 0.15 dB
• In pack of 5 pieces
Heat shrinkable splice protector for 0.25 mm or 0.9 mm fibres. Used to reinforce and protect the splice point of two optical fibres.
• Length 40 mm
• For fibres with diameters of 250 μm and 900 μm
• For fibres with diameters of 250 μm and 900 μm
Heat-shrinkable tubing for 0.25 mm or 0.9 mm optical fibers, used for strengthening and protecting fusion splices.
• Length 40 mm
• For fibers with diameters of 250 μm and 900 μm
• 100 pieces
• For fibers with diameters of 250 μm and 900 μm
• 100 pieces
Heat shrinkable splice protector for 0.25 mm or 0.9 mm fibres. Used to reinforce and protect the splice point of two optical fibres.
• Length 60 mm
• For fibres with diameters of 250 μm and 900 μm
• For fibres with diameters of 250 μm and 900 μm
Thermally shrinkable mechanical splice protector for 0.25 mm or 0.9 mm fibres. Used to reinforce and protect the splicing point of two optical fibres.
• Length 60 mm
• For fibers with diameters of 250 μm and 900 μm
• 100 pieces
• For fibers with diameters of 250 μm and 900 μm
• 100 pieces
![Protector for ULTIMODE FAST-MS1 mechanical splice [5 pcs.]](https://www.dipol.com.pl/img/thumbnails/l5559+.jpg/18ce9ebacfb9e10f3868e3fb5fc39f09.jpg)
The protective cover has been specially designed for ULTIMODE FAST MS-1 mechanical splices.
• ULTIMODE mechanical weld protector
• Small dimensions
• Set of 5 pieces
• Small dimensions
• Set of 5 pieces
Ultimode quick assembly connectors are suitable for terminating optical fiber cables. They are an alternative to pigtail connections.
• SC/UPC type connector
• Suitable for installation on round cables with a diameter of 3 mm and on flat cables with a diameter of 3x2 mm
• Applicable in single-mode installations, regardless of fibre standard
• Quick and easy installation (approx. 3 minutes)
• Minimum attenuation of 0.25 dB (typically 0.5 dB)
• Reproducible connection quality results
• Suitable for installation on round cables with a diameter of 3 mm and on flat cables with a diameter of 3x2 mm
• Applicable in single-mode installations, regardless of fibre standard
• Quick and easy installation (approx. 3 minutes)
• Minimum attenuation of 0.25 dB (typically 0.5 dB)
• Reproducible connection quality results
Ultimode quick assembly connectors are suitable for terminating optical fiber cables. They are an alternative to pigtail connections.
• SC/APC type connector
• Suitable for installation on round cables with a diameter of 3 mm and on flat cables with a diameter of 3x2 mm
• Applicable in single-mode installations, regardless of fibre standard
• Quick and easy installation (approx. 3 minutes)
• Minimum attenuation of 0.25 dB (typically 0.5 dB)
• Reproducible connection quality results
• Suitable for installation on round cables with a diameter of 3 mm and on flat cables with a diameter of 3x2 mm
• Applicable in single-mode installations, regardless of fibre standard
• Quick and easy installation (approx. 3 minutes)
• Minimum attenuation of 0.25 dB (typically 0.5 dB)
• Reproducible connection quality results
