EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Fiber optics is becoming a dominant transmission medium in many branches of telecommunications systems. They are increasingly used not only by telecommunication operators but also by TV/SAT++ and CCTV++ contractors.
In our fiber optic cables range we offer both single mode optical fibers and multimode optical fibers. Single mode fibers are used in all types of installations and will always be a good, future proof choice. Multimode fibers, due to their design, can be used in systems in difficult environmental conditions. The cables must be used with matching (fiber standard and connector type) pigtails, adapters and patchcords.
The fiber optic systems section also offers active devices for Ethernet transmission through the fiber optics: media converters and SFP modules.
Fiber optic splicers allow to quickly make fiber optic joints. The fiber optic splicing range, apart from fiber optic splicers also includes a number of accessories such as: strippers, cutters, blades and splice shields.
In our fiber optic cables range we offer both single mode optical fibers and multimode optical fibers. Single mode fibers are used in all types of installations and will always be a good, future proof choice. Multimode fibers, due to their design, can be used in systems in difficult environmental conditions. The cables must be used with matching (fiber standard and connector type) pigtails, adapters and patchcords.
The fiber optic systems section also offers active devices for Ethernet transmission through the fiber optics: media converters and SFP modules.
Fiber optic splicers allow to quickly make fiber optic joints. The fiber optic splicing range, apart from fiber optic splicers also includes a number of accessories such as: strippers, cutters, blades and splice shields.
The AI-5 is the entry-level model in Signal Fire's extensive range of splicing machines.
• 4 motors responsible for fibre positioning
• Positioning to the core or to the fibre cladding
• Auto mode possible
• Image magnification x300
• Min. splicing time 8 seconds
• Fast oven - it takes 18 s to heat and shrink a 40 mm splice protective sleeve
• Configuration via phone app (Android/iOS)
• Settable software lock of the splicer
• Large (5'') display with adjustable brightness
• Possibility to create splice reports with a dedicated application (export to xls)
• Metal casing with rubber coating underneath.
• LED lamp
• High-capacity (5200 mAh, approx. 160 splicing and heating cycles), replaceable battery
• Battery charging time of approx. 3 h
• Universal fibre holders
• Practical carrying case included
• Full set of accessories
• Positioning to the core or to the fibre cladding
• Auto mode possible
• Image magnification x300
• Min. splicing time 8 seconds
• Fast oven - it takes 18 s to heat and shrink a 40 mm splice protective sleeve
• Configuration via phone app (Android/iOS)
• Settable software lock of the splicer
• Large (5'') display with adjustable brightness
• Possibility to create splice reports with a dedicated application (export to xls)
• Metal casing with rubber coating underneath.
• LED lamp
• High-capacity (5200 mAh, approx. 160 splicing and heating cycles), replaceable battery
• Battery charging time of approx. 3 h
• Universal fibre holders
• Practical carrying case included
• Full set of accessories
Signal Fire AI-9 is a splicer that has a built-in optical power meter and VFL visual fault locator.
• 4-year Authorised Distributor warranty
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the core or to the fibre jacket
• Auto mode capability
• Image magnification x300
• 4-core processor for high speed operation
• Minimum welding time of 6 seconds
• Fast oven - welding a 40 mm weld sheath takes 15 seconds
• Configuration via phone app (Android/iOS)
• Large (5.1'') display with adjustable brightness
• Possibility to create welding reports with the dedicated application (export to xls)
• Metal casing with rubber coating underneath
• Approximately 240 welding and welding cycles per charge
• Battery charging time of approx. 3.5 h
• Comprehensive set of accessories
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the core or to the fibre jacket
• Auto mode capability
• Image magnification x300
• 4-core processor for high speed operation
• Minimum welding time of 6 seconds
• Fast oven - welding a 40 mm weld sheath takes 15 seconds
• Configuration via phone app (Android/iOS)
• Large (5.1'') display with adjustable brightness
• Possibility to create welding reports with the dedicated application (export to xls)
• Metal casing with rubber coating underneath
• Approximately 240 welding and welding cycles per charge
• Battery charging time of approx. 3.5 h
• Comprehensive set of accessories
The Sendun SD-9+ fibre optic splicer is designed for splicing optical fibres. It uses position-to-core technology with an auto-focus function.
• 4-year Authorised Distributor Warranty
• 6 motors for fibre positioning
• 4-core processor for speed of operation
• Positioning to the core or to the fibre jacket
• Can operate in Auto mode or one of 41 presets
• Built-in optical power meter and visual fault locator VFL
• Image magnification x380
• Motor speed
• Min. splicing time 5 seconds
• Min. time to weld 40 mm weld shield is 11 seconds
• 4.3'' touchscreen display
• 7200 mAh battery allowing an average of 320 welding + sealing cycles
• Electrode life of approx. 5,000 splices
• Universal fibre holders
• Practical, capacious case
• Rich set of accessories
• Guillotine with autorotation function
• Menu in English or Polish
• 6 motors for fibre positioning
• 4-core processor for speed of operation
• Positioning to the core or to the fibre jacket
• Can operate in Auto mode or one of 41 presets
• Built-in optical power meter and visual fault locator VFL
• Image magnification x380
• Motor speed
• Min. splicing time 5 seconds
• Min. time to weld 40 mm weld shield is 11 seconds
• 4.3'' touchscreen display
• 7200 mAh battery allowing an average of 320 welding + sealing cycles
• Electrode life of approx. 5,000 splices
• Universal fibre holders
• Practical, capacious case
• Rich set of accessories
• Guillotine with autorotation function
• Menu in English or Polish
The Sendun 9C+ fibre optic cutter is used in the preparation of fibres for thermal splicing. The robust design ensures high precision and repeatable cuts.
• Solid construction
• 24-position blade with auto-rotation mechanism
• Fibre cuttings bin
• Plastic case included
• 24-position blade with auto-rotation mechanism
• Fibre cuttings bin
• Plastic case included
The Signal Fire S-06 L5882 fiber optic cleaver ensures maximum ease of use while maintaining the highest repeatability of cutting.
• Universal blade for cutting optical fibers
• Fibers in the coating from 250 μm to 900 μm
• Fibers in the 125 μm primary coating
• 3 mm flat cables/patch cables
• Cutting length: 10-20 mm
• Replaceable 16 position blade
• Fibers in the coating from 250 μm to 900 μm
• Fibers in the 125 μm primary coating
• 3 mm flat cables/patch cables
• Cutting length: 10-20 mm
• Replaceable 16 position blade
The blade is intended for the Signal Fire S-06 L5882 cleaver.
• For Signal Fire S-06 knife
• 12 positions
• About 1000 cuts on each position
• 12 positions
• About 1000 cuts on each position
Lithium-ion battery designed for Signal Fire AI-9, AI-8C, AI-8 and AI-7 welding machines.
• 7800 mAh capacity
• Fits all Signal Fire welding machines
• Fits all Signal Fire welding machines
A set of spare electrodes designed for Signal Fire AI-9 and AI-5 splicing machines.
• Set designed for all Signal Fire welders
• Life time approx. 3000 splices
• Life time approx. 3000 splices
Set of spare electrodes for the Sendun SD-9+ splicing machine.
• Set designed for Sendun SD-9+ splicing machine
• Life span approx. 3000 splices
• Life span approx. 3000 splices
Holder for Sendun SD-9+ splicing machine. Allows the splicing of SOC (Splice On Connecor) type connectors.
• Material: plastic
• For mounting on Sendun SD-9+ splicer
• For SOC SC and FC connectors
• For mounting on Sendun SD-9+ splicer
• For SOC SC and FC connectors
The blade is designed for the Sendun 9C+ cleaver, which is part of the Sendun SD-9+ welding tool set.
• Designed for Sendun 9C+ cleaver
• Long life
• Long life
Lithium-ion battery designed for the Sendun SD-9+ L5877 splicing machine. The battery capacity is 7200 mAh.
• Purpose - Senun SD-9+ splicer
• Capacity 7200 mAh
• LED charging indicator
• Capacity 7200 mAh
• LED charging indicator
![Fiber Optic Mechanical Splice: ULTIMODE FAST-MS1 [5 pcs.]](https://www.dipolnet.com/img/thumbnails/l5550+.jpg/1db49b3ea49f13233b6edd5261cb36a7.jpg)
ULTIMODE FAST MS-1 mechanical splices enable permanent fibre connections to be made without the use of fibre splicers.
• Ideal for CCTV installations based on optical fibres
• For optical fibres with diameters of 250 μm and 900 μm
• For single mode and multimode fibres.
• Average attenuation of splices: approx. 0.15 dB
• In pack of 5 pieces
• For optical fibres with diameters of 250 μm and 900 μm
• For single mode and multimode fibres.
• Average attenuation of splices: approx. 0.15 dB
• In pack of 5 pieces
Heat shrinkable splice protector for 0.25 mm or 0.9 mm fibres. Used to reinforce and protect the splice point of two optical fibres.
• Length 40 mm
• For fibres with diameters of 250 μm and 900 μm
• For fibres with diameters of 250 μm and 900 μm
Heat-shrinkable tubing for 0.25 mm or 0.9 mm optical fibers, used for strengthening and protecting fusion splices.
• Length 40 mm
• For fibers with diameters of 250 μm and 900 μm
• 100 pieces
• For fibers with diameters of 250 μm and 900 μm
• 100 pieces
Heat shrinkable splice protector for 0.25 mm or 0.9 mm fibres. Used to reinforce and protect the splice point of two optical fibres.
• Length 60 mm
• For fibres with diameters of 250 μm and 900 μm
• For fibres with diameters of 250 μm and 900 μm
Thermally shrinkable mechanical splice protector for 0.25 mm or 0.9 mm fibres. Used to reinforce and protect the splicing point of two optical fibres.
• Length 60 mm
• For fibers with diameters of 250 μm and 900 μm
• 100 pieces
• For fibers with diameters of 250 μm and 900 μm
• 100 pieces
The fixture has been specially designed for ULTIMODE FAST MS-1 mechanical weldments and allows up to 6 splices to be secured.
• ULTIMODE 6-splicer mechanical splice bracket
• Hole for screw or bolt
• Hole for screw or bolt
![Protector for ULTIMODE FAST-MS1 mechanical splice [5 pcs.]](https://www.ostelsat.hu/img/thumbnails/l5559+.jpg/18ce9ebacfb9e10f3868e3fb5fc39f09.jpg)
The protective cover has been specially designed for ULTIMODE FAST MS-1 mechanical splices.
• ULTIMODE mechanical weld protector
• Small dimensions
• Set of 5 pieces
• Small dimensions
• Set of 5 pieces
Ultimode quick assembly connectors are suitable for terminating optical fiber cables. They are an alternative to pigtail connections.
• SC/UPC type connector
• Suitable for installation on round cables with a diameter of 3 mm and on flat cables with a diameter of 3x2 mm
• Applicable in single-mode installations, regardless of fibre standard
• Quick and easy installation (approx. 3 minutes)
• Minimum attenuation of 0.25 dB (typically 0.5 dB)
• Reproducible connection quality results
• Suitable for installation on round cables with a diameter of 3 mm and on flat cables with a diameter of 3x2 mm
• Applicable in single-mode installations, regardless of fibre standard
• Quick and easy installation (approx. 3 minutes)
• Minimum attenuation of 0.25 dB (typically 0.5 dB)
• Reproducible connection quality results
Ultimode quick assembly connectors are suitable for terminating optical fiber cables. They are an alternative to pigtail connections.
• SC/APC type connector
• Suitable for installation on round cables with a diameter of 3 mm and on flat cables with a diameter of 3x2 mm
• Applicable in single-mode installations, regardless of fibre standard
• Quick and easy installation (approx. 3 minutes)
• Minimum attenuation of 0.25 dB (typically 0.5 dB)
• Reproducible connection quality results
• Suitable for installation on round cables with a diameter of 3 mm and on flat cables with a diameter of 3x2 mm
• Applicable in single-mode installations, regardless of fibre standard
• Quick and easy installation (approx. 3 minutes)
• Minimum attenuation of 0.25 dB (typically 0.5 dB)
• Reproducible connection quality results
The Ultimode Fast measure is a tool to simplify and speed up the process of earning Ultimode fast connectors on fibre optic cables.
• For Ultimode quick assembly connectors
• Measuring 250 μm and 900 μm fibers
• Faster quick assembly connector installation
• Measuring 250 μm and 900 μm fibers
• Faster quick assembly connector installation
Kim-Wipes dust-free wipes are used to clean fibre and fibre optic connectors.
• For cleaning optical fibers and equipment
• Wipe size: 114 mm x 216 mm
• 280 pieces
• Wipe size: 114 mm x 216 mm
• 280 pieces
The IPA cleaner removes grease and other contaminants from the surface of optical fibers before attachment or splicing.
• Essential for cleaning fiber optics before splicing
• Volume 1 liter
• Volume 1 liter
NEOCLEAN-E3 is an innovative device for cleaning fibre optic connectors with a ferrule diameter of 2.5 mm (E3).
• Cleaning ferrules of following connector types: SC, FC, ST, E2000
• Around 750 cleaning cycles
• Around 750 cleaning cycles
NEOCLEAN-E1 is an innovative device for cleaning fibre optic connectors with a ferrule diameter of 1.25 mm (E1).
• Cleaning ferrules of following connector types: MU, LC
• Around 750 cleaning cycles
• Around 750 cleaning cycles
The Ultimode F250 is a tool designed for cleaning fibre optic connectors. Its design allows cleaning of both sockets and connectors.
• Cleaning of connector ferrules: SC, FC, ST
• Approximately 750 cleaning cycles
• Approximately 750 cleaning cycles
The Ultimode F125 is a tool designed for cleaning fibre optic connectors. Its design allows cleaning of both sockets and connectors.
• Cleaning of connector ferrules: LC, E2000
• Approximately 750 cleaning cycles
• Approximately 750 cleaning cycles
The fibre waste container provides secure storage of fibre waste.
• Safe storage of fibre optic waste
• Capacious for long life
• Filled container is recyclable with contents
• Capacious for long life
• Filled container is recyclable with contents
The SC simplex keystone adapter, allows a single SC simplex adapter to be fitted into patch panels and sockets designed for mounting keystone modules.
• Dedicated for SC connectors
The ULTIMODE A-111 single-mode adapter allows to connect optical fibers terminated with SC/UPC connectors.
• Adapter type: simplex
• Connectors: SC/UPC - SC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
• Connectors: SC/UPC - SC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
The ULTIMODE A-115 single-mode adapter allows to connect optical fibers terminated with SC/UPC and FC/UPC connectors.
• Adapter type: simplex
• Connectors: SC/UPC - FC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
• Connectors: SC/UPC - FC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
The ULTIMODE A-122 single-mode adapter connects optical fibers terminated with SC/APC connectors.
• Adapter type: simplex
• Connectors: SC/APC - SC/APC
• Insertion loss: < 0.2 dB
• Application: single-mode networks
• Connectors: SC/APC - SC/APC
• Insertion loss: < 0.2 dB
• Application: single-mode networks
ULTIMODE A-155 single-mode adapter allows to connect optical fibers terminated with FC/UPC connectors.
• Adapter type: simplex
• Connectors: FC/UPC - FC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
• Connectors: FC/UPC - FC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
The ULTIMODE A-155 single-mode adapter allows to connect optical fibers terminated with FC/APC connectors.
• Typ adaptera: simplex
• Złącza: FC/APC - FC/APC
• Tłumienie: < 0,2 dB
• Zastosowanie: sieci jednomodowe
• Złącza: FC/APC - FC/APC
• Tłumienie: < 0,2 dB
• Zastosowanie: sieci jednomodowe
ULTIMODE A-211 single-mode adapter allows you to connect optical fibers terminated with SC/UPC connectors.
• Adapter type: duplex
• Connectors: 2xSC/UPC - 2xSC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
• Connectors: 2xSC/UPC - 2xSC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
The ULTIMODE A-222 single-mode adapter allows connection ot two optical fibers terminated with SC/APC connectors.
• Adapter type: duplex
• Connectors: 2x SC/APC - 2x SC/APC
• Attenuation: < 0.2 dB
• Application: single-mode networks
• Connectors: 2x SC/APC - 2x SC/APC
• Attenuation: < 0.2 dB
• Application: single-mode networks
The ULTIMODE A-233 single-mode adapter allows connection of two optical fibers terminated with LC/UPC connectors.
• Adapter type: duplex
• Connectors: 2x LC/UPC - 2x LC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
• Connectors: 2x LC/UPC - 2x LC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
The single-mode adapter allows connecting optical fibers terminated with SC/APC connectors. Version without flange.
• Adapter type: simplex
• Connectors: SC/APC-SC/APC
• No flange
• Application: single-mode networks
• Connectors: SC/APC-SC/APC
• No flange
• Application: single-mode networks
The ULTIMODE A-M111 multimode adapter allows connection of two optical fibers terminated with SC connectors.
• Adapter type: simplex
• Connectors: SC - SC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Connectors: SC - SC
• Attenuation: < 0.2 dB
• Application: multimode networks
The ULTIMODE A-M211 multimode adapter allows connection of two optical fibers terminated with SC connectors.
• Adapter type: duplex
• Connectors: 2x SC - 2x SC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Connectors: 2x SC - 2x SC
• Attenuation: < 0.2 dB
• Application: multimode networks
The ULTIMODE A-M233 multimode adapter allows connection of two multimode optical fibers terminated with LC connectors.
• Adapter type: duplex
• Connectors: 2x LC - 2x LC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Connectors: 2x LC - 2x LC
• Attenuation: < 0.2 dB
• Application: multimode networks
The SC/APC - SC/UPC adapter allows you to solve the problem of connecting patchcords with an SC/UPC connector (blue, straight ferrule) to devices with the SC/APC socket (green, truncated ferrule).
• SC/APC male - SC/UPC female adapter
• Attenuation 0,2 dB
• Attenuation 0,2 dB
The SC/UPC – SC/APC adapter allows you to solve the problem of connecting patchcords with SC/APC connector (green, truncated ferrule) to devices with SC/UPC socket (blue, straight ferrule).
• SC/UPC male - SC/APC female adapter
• Attenuation 0,2 dB
• Attenuation 0,2 dB
The FC/UPC - SC/UPC adapter allows you to connect cables terminated with SC/UPC plugs to devices with FC/UPC sockets (e.g. devices for optical TV/SAT signal transmission, video converters, optical power meters).
• FC/UPC male - SC/UPC female adapter
• Attenuation 0,2 dB
• Attenuation 0,2 dB
The FC/APC - SC/APC adapter allows you to connect cables terminated with an SC/APC plug to devices with an FC/APC socket (e.g. devices for optical TV/SAT signal transmission).
• FC/APC male - FC/APC female adapter
• Attenuation 0,2 dB
• Attenuation 0,2 dB
The LC/UPC - SC/UPC adapter provides a solution to the problem of connecting cables/patchcords with an SC/UPC connector to devices or patchpanels with an LC/UPC socket.
• LC/UPC male - SC/UPC female adapter
• Attenuation 0,2 dB
• Attenuation 0,2 dB
The SC/UPC - LC/UPC adapter provides a solution to the problem of connecting cables/patchcords with an LC/UPC connector to devices or patchpanels with an SC/UPC socket.
• SC/UPC male - LC/UPC female adapter
• Attenuation 0,2 dB
• Attenuation 0,2 dB
The ULTIMODE A-M211 multimode adapter allows to connect optical fibers terminated with SC connectors.
• Adapter type: duplex
• Connectors: 2x SC - 2x SC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Color: purple (OM4)
• Connectors: 2x SC - 2x SC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Color: purple (OM4)
The ULTIMODE A-M233 multimode adapter allows you to connect optical fibers terminated with LC connectors.
• Adapter type: duplex
• Connectors: 2x LC - 2x LC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Color: purple (OM4)
• Connectors: 2x LC - 2x LC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Color: purple (OM4)
The ULTIMODE PC-1172-1B patch cord is a 1-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 1 m
• Colour: blue
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• Colour: blue
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-1G patch cord is a 1-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 1 m
• Colour: green
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• Colour: green
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-1R patch cord is a 1-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 1 m
• Colour: red
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• Colour: red
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-05 patch cord is a 0.5 meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 0.5 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 0.5 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 1 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 2 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 2 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 3 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 3 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 5 m
• Single-mode fibre G.657.A2
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 5 m
• Single-mode fibre G.657.A2
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1272-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• SC/UPC - SC/APC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1272-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• SC/UPC - SC/APC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1272-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• SC/UPC - SC/APC connectors
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1272-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• SC/UPC - SC/APC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1372-05 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• SC/UPC - LC/UPC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1372-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• SC/UPC - LC/UPC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1372-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• SC/UPC - LC/UPC connectors
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1372-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• SC/UPC - LC/UPC connectors
• Length - 5 m
• Single-mode fibre G.657.A2
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Link reflection loss > 50 dB (Grade 2)
• Length - 5 m
• Single-mode fibre G.657.A2
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Link reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1572-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC and FC/UPC connectors.
• SC/UPC - FC/UPC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1572-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/UPC and FC/UPC connectors.
• SC/UPC - FC/UPC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-2272-1B patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 1 m
• Blue color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• Blue color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272-1G patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 1 m
• Green color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• Green color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272-1R patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 1 m
• Red colour
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• Red colour
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
ULTIMODE PC-2272W-10 patch cord is a 10-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length: 10 m
• Single-mode fibre G.657.A2
• LSZH coating
• Colour: white
• Diameter: 3 mm
• Connector attenuation: < 0.25 dB (Grade B)
• Connector reflection loss: > 60 dB (Grade 1)
• Length: 10 m
• Single-mode fibre G.657.A2
• LSZH coating
• Colour: white
• Diameter: 3 mm
• Connector attenuation: < 0.25 dB (Grade B)
• Connector reflection loss: > 60 dB (Grade 1)
The ULTIMODE PC-2272-05 patch cord is a 0.5 meter long single-mode fiber optic cable terminated with SC/APC connectors.
• Złącza SC/APC - SC/APC
• Długość - 0,5 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 60 dB (Grade 1)
• Długość - 0,5 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 60 dB (Grade 1)
The ULTIMODE PC-2272-1 patch cord is a 1-meter single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272-10 patchcord is a 10-meter single-mode fiber optic cable terminated with SC/APC connectors.
• Connectors SC/APC - SC/APC
• Length - 10 m
• Single-mode fiber G.657.A2
• LSZH jacket
• Diameter 3 mm
• Connector loss < 0.25 dB (Grade B)
• Connector return loss > 60 dB (Grade 1)
• Length - 10 m
• Single-mode fiber G.657.A2
• LSZH jacket
• Diameter 3 mm
• Connector loss < 0.25 dB (Grade B)
• Connector return loss > 60 dB (Grade 1)
The ULTIMODE PC-2272-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272-3 patch cord is a 3-meter long ingle-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2572-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/APC and FC/UPC connectors.
• SC/APC - FC/UPC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2), > 60 dB (Grade 1)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2), > 60 dB (Grade 1)
The ULTIMODE PC-2672-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC and FC/APC connectors.
• SC/APC - FC/APC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-3572-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with LC/UPC and FC/UPC connectors.
• LC/UPC - FC/UPC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-3572-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with LC/UPC and FC/UPC connectors.
• LC/UPC - FC/UPC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-515S1 patch cable is a section of a single-mode fiber optic cable with a length of 5 metres, terminated with LC/PC and SC/PC connectors.
• Connectors: 1x SC/PC - 1x LC/PC
• One single-mode fibre (G.657A1)
• Length: 5 m
• Diameter: 2 mm
• Low attenuation
• One single-mode fibre (G.657A1)
• Length: 5 m
• Diameter: 2 mm
• Low attenuation
The ULTIMODE PC-5572-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with FC/UPC connectors.
• FC/UPC - FC/UPC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-5572-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with FC/UPC connectors.
• FC/UPC - FC/UPC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-5572-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with FC/UPC connectors.
• FC/UPC - FC/UPC connectors
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-5572-3 patch cord is a 5-meter long single-mode fiber optic cable terminated with FC/UPC connectors.
• FC/UPC - FC/UPC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172D-1B patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 1 m
• Blue color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• Blue color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1172D-1G patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 1 m
• Green color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• Green color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1172D-1R patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 1 m
• Red colour
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• Red colour
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1172D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1172D-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1172D-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1172D-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1272D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• 2xSC/UPC - 2xSC/APC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1272D-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• 2xSC/UPC - 2xSC/APC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1272D-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• Złącza 2xSC/UPC - 2xSC/APC
• Długość - 3 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 2x3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 60 dB (Grade 1), > 45 dB (Grade 2)
• Długość - 3 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 2x3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1272D-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• 2xSC/UPC - 2xSC/APC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1372D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• Connectors 2x SC/UPC - 2x LC/UPC
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1372D-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• Connectors 2x SC/UPC - 2x LC/UPC
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1372D-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• Connectors 2x SC/UPC - 2x LC/UPC
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1372D-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• Connectors 2x SC/UPC - 2x LC/UPC
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-2272D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• 2xSC/APC - 2xSC/APC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272D-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• 2xSC/APC - 2xSC/APC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272D-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• 2xSC/APC - 2xSC/APC connectors
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272D-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• 2xSC/APC - 2xSC/APC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2372D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC and LC/UPC connectors.
• Connectors 2xSC/APC - 2xLC/UPC
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-2372D-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/APC and LC/UPC connectors.
• Connectors 2xSC/APC - 2xLC/UPC
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-2372D-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/APC and LC/UPC connectors.
• Connectors 2xSC/APC - 2xLC/UPC
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-2372D-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/APC and LC/UPC connectors.
• Connectors 2xSC/APC - 2xLC/UPC
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-2472D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC and LC/APC connectors.
• 2xSC/APC - 2xLC/APC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-3372D-1B patch cord is a 1-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• 2xLC/UPC - 2xLC/UPC connectors
• Length - 1 m
• Blue color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• Blue color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-3372D-1G patch cord is a 1-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• 2xLC/UPC - 2xLC/UPC connectors
• Length - 1 m
• Green color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• Green color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-3372D-1R patch cord is a 1-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• 2xLC/UPC - 2xLC/UPC connectors
• Length - 1 m
• Red colour
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• Red colour
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-3372D-05 patch cord is a 0.5 meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• 2xLC/UPC - 2xLC/UPC connectors
• Length - 0.5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 0.5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-3372D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• 2xLC/UPC - 2xLC/UPC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-3372D-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• Złącza 2xLC/UPC - 2xLC/UPC
• Długość - 2 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 2x3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 45 dB (Grade 2)
• Długość - 2 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 2x3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 45 dB (Grade 2)
The ULTIMODE PC-3372D-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• Złącza 2xLC/UPC - 2xLC/UPC
• Długość - 3 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 2x3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 45 dB (Grade 2)
• Długość - 3 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 2x3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 45 dB (Grade 2)
The ULTIMODE PC-3372D-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• 2xLC/UPC - 2xLC/UPC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
This COMSAT patch cord is a section of an outdoor single-mode fiber optic cable with a length of 10 meters, terminated on both ends with FC/PC connectors.
• Patchcord is designed for satellite and terrestrial DVB-T distribution systems using optical fibre
• Can be a connection between the optical converter A9885 or the transmitter from the A9880 set and the first optical splitter inside the building
• Can be a connection between the optical converter A9885 or the transmitter from the A9880 set and the first optical splitter inside the building
The ULTIMODE PC-1103D-1 patch cord is a 1-meter long multi-mode fiber optic cable terminated with SC connectors.
• Connectors 2x SC - 2x SC
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-1103D-3 patch cord is a 1-meter long multi-mode fiber optic cable terminated with SC connectors.
• Connectors 2x SC - 2x SC
• Length - 3 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 3 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-1104D-1 patchcord is a 1-meter multimode fiber optic cable terminated with SC connectors.
• Connectors: 2x SC - 2x SC
• Length: 1 m
• Multimode fiber: OM4
• Sheath: LSZH
• Diameter: 2x 3 mm
• Connector loss: < 0.3 dB
• Connector return loss: > 20 dB
• Length: 1 m
• Multimode fiber: OM4
• Sheath: LSZH
• Diameter: 2x 3 mm
• Connector loss: < 0.3 dB
• Connector return loss: > 20 dB
The ULTIMODE PC-1103D-1 patch cord is a 1-meter long multi-mode fiber optic cable terminated with SC and LC connectors.
• Connectors 2x SC - 2x LC
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-1103D-3 patch cord is a 3-meter long multi-mode fiber optic cable terminated with SC and LC connectors.
• Connectors 2x SC - 2x LC
• Length - 3 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 3 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-1703D-1 patch cord is a 1-meter long multi-mode fiber optic cable terminated with SC and ST connectors.
• Connectors 2x SC - 2x ST
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-3303D-1 patch cord is a 1-meter long multi-mode fiber optic cable terminated with LC connectors.
• Connectors 2x LC - 2x LC
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-3303D-3 patch cord is a 3-meter long multi-mode fiber optic cable terminated with LC connectors.
• Connectors 2x LC - 2x LC
• Length - 3 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 3 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-3304D-1 patchcord is a 1-meter multimode fiber optic cable terminated with LC connectors.
• Connectors 2x LC - 2x LC
• Length: 1 m
• OM4 multimode fiber
• LSZH coating
• Diameter: 2x 3 mm
• Connector loss < 0.3 dB
• Connector return loss > 20 dB
• Length: 1 m
• OM4 multimode fiber
• LSZH coating
• Diameter: 2x 3 mm
• Connector loss < 0.3 dB
• Connector return loss > 20 dB
The ULTIMODE PC-3304D-3 patchcord is a section of multimode fibre optic cable with a length of 3 metres terminated with LC connectors.
The ULTIMODE PC-3703D-1 patch cord is a 1-meter long multi-mode fiber optic cable terminated with LC and ST connectors.
• Connectors 2x LC - 2x ST
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
Pigtail ULTIMODE PG-152-1 is a 1-meter long single-mode fiber optic cable terminated on one end with an SC/UPC connector. The element is used to terminate fiber optic cable routes.
• SC/UPC connector
• Length - 1 m
• Single mode fiber G.652.D
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Length - 1 m
• Single mode fiber G.652.D
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Set of single-mode pigtails 4 pcs. PG-171A-1 SC/UPC G.657A1 1 m red, green, blue, yellow.
• 4 pcs of pigtails
• Colors: red, green, blue, yellow
• SC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Colors: red, green, blue, yellow
• SC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Set of single-mode pigtails 4 pcs. PG-171B-1 SC/UPC G.657A1 1 m white, gray, brown, purple.
• 4 pcs of pigtails
• Colors: white, gray, brown, purple
• SC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Colors: white, gray, brown, purple
• SC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Set of single-mode pigtails 4 pcs. PG-171C-1 SC/UPC G.657A1 1 m aqua, black, orange, pink.
• 4 pcs of pigtails
• Colors: aqua, black, orange, pink
• SC/UPC connector
• Length - 1m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Colors: aqua, black, orange, pink
• SC/UPC connector
• Length - 1m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Pigtail ULTIMODE PG-172-1 is a 1-meter long single-mode fiber optic cable terminated on one end with an SC/UPC connector. The element is used to terminate fiber optic cable routes.
• SC/UPC connector
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
A fibre optic patchcord with a length of 1 metre and a diameter of 3 millimetres, manufactured from single-mode duplex fibre optic cable terminated with an SC/APC connector on one side and an FC/UPC connector on the other.
• Connectors: 2x SC/APC - 2 x FC/UPC
• 2 single-mode fibers (G.657A1)
• Length: 1 m
• Low attenuation
• 2 single-mode fibers (G.657A1)
• Length: 1 m
• Low attenuation
Pigtail ULTIMODE PG-252-1 is a 1-meter long single-mode fiber optic cable terminated on one end with an SC/APC connector. The element is used to terminate fiber optic cable routes.
• SC/APC connector
• Length - 1 m
• G.652.D single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
• Length - 1 m
• G.652.D single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
Set of single-mode pigtails 4 pcs. PG-271A-1 SC/APC G.657A1 1 m red, green, blue, yellow.
• 4 pieces of pigtails
• Colors: red, green, blue, yellow
• SC/APC connector
• Length - 1m
• Single mode fiber G.657.A1
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
• Colors: red, green, blue, yellow
• SC/APC connector
• Length - 1m
• Single mode fiber G.657.A1
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
Set of single-mode pigtails 4 pcs. PG-271B-1 SC/APC G.657A1 1 m white, gray, brown, purple.
• 4 pieces of pigtails
• Colors: white, gray, brown, purple
• SC/APC connector
• Length - 1m
• Single mode fiber G.657.A1
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
• Colors: white, gray, brown, purple
• SC/APC connector
• Length - 1m
• Single mode fiber G.657.A1
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
Single-mode pigtail set 4 pcs. PG-271C-1 SC/APC G.657A1 1 m aqua, black, orange, pink.
• 4 pieces of pigtails
• Colours: aqua, black, orange, pink
• SC/APC connector
• Length - 1 m
• Single-mode fibre G.657.A1
• LSZH sheath
• Attenuation < 0.25 dB (Grade B)
• Rebound attenuation > 60 dB (Grade 1)
• Colours: aqua, black, orange, pink
• SC/APC connector
• Length - 1 m
• Single-mode fibre G.657.A1
• LSZH sheath
• Attenuation < 0.25 dB (Grade B)
• Rebound attenuation > 60 dB (Grade 1)
Pigtail ULTIMODE PG-272-1 is a 1-meter long single-mode fiber optic cable terminated on one end with an SC/APC connector. The element is used to terminate fiber optic cable routes.
• SC/APC connector
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
Pigtail ULTIMODE PG-352-1 is a 1-meter long single-mode fiber optic cable terminated with an LC connector on one end. The element is used to terminate fiber optic cable routes.
• LC/UPC connector
• Length - 1 m
• G.652.D single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.652.D single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Set of single-mode pigtails 4 pcs. PG-371A-1 LC/UPC G.657A1 1 m red, green, blue, yellow.
• 4 pcs of pigtails
• Colors: red, green, blue, yellow
• LC/UPC connector
• Length - 1m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Colors: red, green, blue, yellow
• LC/UPC connector
• Length - 1m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Set of single-mode pigtails 4 pcs. PG-371B-1 LC/UPC G.657A1 1m white, gray, brown, purple.
• 4 pcs of pigtails
• Colors: white, gray, brown, purple
• LC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Colors: white, gray, brown, purple
• LC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Set of single-mode pigtails 4 pcs. PG-371C-1 LC/UPC G.657A1 1 m aqua, black, orange, pink.
• 4 pcs of pigtails
• Colors: aqua, black, orange, pink
• LC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Colors: aqua, black, orange, pink
• LC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Pigtail ULTIMODE PG-372-1 is a 1-meter long single-mode fiber optic cable terminated on one end with an LC connector. The element is used to terminate fiber optic cable routes.
• LC/UPC connector
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Pigtail ULTIMODE PG-572-1 is a 1-meter long single-mode fiber optic cable terminated on one end with an FC/UPC connector. The element is used to terminate fiber optic cable routes.
• FC/UPC connector
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Pigtail ULTIMODE PG-103-1 is a 1-meter long multi-mode fiber optic cable terminated with an SC connector on one end. The element is used to terminate fiber optic cable routes.
• SC connector
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Connector attenuation < 0.3 dB
• Connector return loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Connector attenuation < 0.3 dB
• Connector return loss > 20 dB
Pigtail ULTIMODE PG-104-1 is a 1 meter long multimode fiber optic cable terminated on one side with an SC connector. The element is used to terminate fiber optic cable routes.
• Connector: SC
• Length: 1 m
• Multimode fiber: OM4
• Sheath: LSZH
• Connector loss: < 0.3 dB
• Connector return loss: > 20 dB
• Length: 1 m
• Multimode fiber: OM4
• Sheath: LSZH
• Connector loss: < 0.3 dB
• Connector return loss: > 20 dB
Pigtail ULTIMODE PG-303-1 is a 1-meter long multi-mode fiber optic cable terminated with an LC connector on one end. The element is used to terminate fiber optic cable routes.
• LC connector
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
Pigtail ULTIMODE PG-304-1 is a 1 meter multimode fiber optic cable terminated on one side with an LC connector. The element is used to terminate fiber optic cable routes.
• Connector: LC
• Length: 1 m
• Multimode fiber: OM4
• Sheath: LSZH
• Connector loss: < 0.3 dB
• Connector return loss: > 20 dB
• Length: 1 m
• Multimode fiber: OM4
• Sheath: LSZH
• Connector loss: < 0.3 dB
• Connector return loss: > 20 dB
The F1-6000 cutter is designed for fast and accurate cutting of fibres with 125 µm jacket diameter and 250/900 µm coverage.
• Easy to use - no adjustment required
• Ceramic blade
• Graduated scale (2 to 20 mm)
• Ceramic blades designed for 6000 operations
• Ceramic blade
• Graduated scale (2 to 20 mm)
• Ceramic blades designed for 6000 operations
The HT-C151 scissors are used to trim the excess optical fiber and aramid fibers. Hardened steel blades ensure long product life.
• Super sharp
• Smooth cutting of aramid fibers, braids, etc.
• Lightweight and easy to use
• Hardened steel for long life
• Smooth cutting of aramid fibers, braids, etc.
• Lightweight and easy to use
• Hardened steel for long life
Universal, 3-hole fibre stripper.
• Openings for 250 µm, 900 µm fibres and 2-3 mm cables
• Convenient to use
• Blade lock possible
• Convenient to use
• Blade lock possible
The IDEAL Coaxial Stripper 45-163 is a tool for notching and cutting fibre optic tubes and round fibre optic cables with diameters from 3 to 6.4 mm.
• Cutting and splitting tool for fibre optic tubes and cables
• Cuts cables and tubes from 3 to 6.4 mm in diameter
• Can also be used to work with copper cables
• Three adjustable blades for transverse and longitudinal cutting
• Spare blade included
• Original product - made in USA
• Cuts cables and tubes from 3 to 6.4 mm in diameter
• Can also be used to work with copper cables
• Three adjustable blades for transverse and longitudinal cutting
• Spare blade included
• Original product - made in USA
The Miller MSAT-5 stripper is a tool designed to make indentations in cable tubes and sheaths without disturbing the optical fibres.
• Applicable for tubes with five diameters, from 1.9 mm to 3.0 mm
• Safe for optical fibers
• Safe for optical fibers
The TP-T11 L5926 cutting tool is dedicated for loose tubes and DROP cables. This small and handy slitter has 4 channels for tubes/cables with different diameters.
• New! - slitter for FO tubes and cables
• Suitable for cables with diam. up to 3.3 mm
• Speeds up the preparation of a cable for splicing
• High quality blades in four channels
• Made of durable plastic
• Suitable for cables with diam. up to 3.3 mm
• Speeds up the preparation of a cable for splicing
• High quality blades in four channels
• Made of durable plastic
The T-T26 L5928 cutting tool is dedicated for loose tubes and DROP cables. This small and handy slitter is extremely easy to use.
• 5 slots for slitting tubes/cables
• Tube/cable diameter 4.5 - 11 mm
• Tube/cable diameter 4.5 - 11 mm
The ULTIMODE OPM-20T-V01 optical power meter is a device used to check the attenuation of the optical path of single- and multimode fibre optic networks.
• InGaAS detector
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
The TM103N L5815 optical power meter is designed to measure optical power loss in multimode and single-mode fiber-optic networks.
• Small, easy to use
• InGaAS detector
• 850, 1300, 1310, 1490, 1550, 1625 nm
• SC connector, FC adapter
• Possibility to measure relative or absolute power level
• Measurement range: -50...+26 dBm
• Reference measurement function
• Battery power supply 3x AAA
• InGaAS detector
• 850, 1300, 1310, 1490, 1550, 1625 nm
• SC connector, FC adapter
• Possibility to measure relative or absolute power level
• Measurement range: -50...+26 dBm
• Reference measurement function
• Battery power supply 3x AAA
The TM102N-SM L5819 optical laser source is a tool necessary for measuring optical power loss in fiber-optic networks (FTTx).
• Beam generation with a wavelength of 1310 nm or 1550 nm
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• Battery power supply 3x AAA
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• Battery power supply 3x AAA
The GRANDWAY FHP2B04 optical power meter is a device for checking the optical path attenuation of single- and multimode optical fibre networks.
• Memory for up to 999 measurements
• 850, 1300, 1310, 1490, 1550, 1625 nm
• InGaAS detector
• Possibility to measure relative or absolute power level
• Powered by rechargeable batteries via power supply
• Auto shut-off function
• 850, 1300, 1310, 1490, 1550, 1625 nm
• InGaAS detector
• Possibility to measure relative or absolute power level
• Powered by rechargeable batteries via power supply
• Auto shut-off function
The TM102N-SM L5819 optical laser source is a tool necessary for attenuation measurements of optical path in networks based on multimode fibres.
• Generated wavelength: 850 nm or 1300 nm
• Output power: -7.0 dBm
• AUTO-OFF function when no activity is detected
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
• Output power: -7.0 dBm
• AUTO-OFF function when no activity is detected
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
The GRANDWAY FHS1D02 light source is an essential tool for measuring optical path attenuation in FTTx networks.
• Beam generation with a wavelength of 1310 nm or 1550 nm
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• 4x AAA battery power supply
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• 4x AAA battery power supply
The GRANDWAY FHS2Q01F light source is an essential tool for measuring optical path attenuation in FTTx networks.
• For multi mode and single mode fiber based networks
• Generated wavelength: 850 nm, 1300 nm, 1310 nm or 1550 nm
• Output power: -5.0 dBm
• Simple and intuitive operation
• Generated wavelength: 850 nm, 1300 nm, 1310 nm or 1550 nm
• Output power: -5.0 dBm
• Simple and intuitive operation
The GRANDWAY FHO3000L-D26 reflectometer is used to measure reflectance, estimate attenuation and analyse events in the transmission optical path.
• Diagnostics of optical paths of up to several tens of km
• Large 5 inch display
• Reflectance measurement and attenuation estimation at 1310 nm and 1550 nm
• Dynamics 26/24 dB
• Small size and easy to use
• Built-in optical power meter and visible light source (VFL)
• FLM function - event mapping for less experienced users
• 40,000 measurements stored
• Possibility to generate detailed reports on PC
• Large 5 inch display
• Reflectance measurement and attenuation estimation at 1310 nm and 1550 nm
• Dynamics 26/24 dB
• Small size and easy to use
• Built-in optical power meter and visible light source (VFL)
• FLM function - event mapping for less experienced users
• 40,000 measurements stored
• Possibility to generate detailed reports on PC
ULTIMODE OR-20-S3S5-iSMV is a device designed for measuring and diagnosing optical fibre connections. It combines the functions of: an OTDR, optical power meter, light source and visual fault locator.
• OTDR+OPM+OLS+VFL+LED
• Reflectometer and fibre optic connection tester
• 3.5 inch screen with multi-touch function (touch screen)
• User-friendly interface similar to smartphone interface
• Measurement at 1310 nm and 1550 nm wavelengths
• Light source and power meter function for transmission measurements
• Detailed analysis of the entire optical path of up to 80 km
• Assistance in verification of events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to create measurement reports pdf/xls
• Reflectometer and fibre optic connection tester
• 3.5 inch screen with multi-touch function (touch screen)
• User-friendly interface similar to smartphone interface
• Measurement at 1310 nm and 1550 nm wavelengths
• Light source and power meter function for transmission measurements
• Detailed analysis of the entire optical path of up to 80 km
• Assistance in verification of events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to create measurement reports pdf/xls
OTDR ULTIMODE OR-30-S3S5S62B-iSMV is a device designed for measuring and diagnosing optical fibre connections.
• OTDR+OPM+OLS+VFL+LED
• Reflectometer and fibre optic connection tester
• 5-inch screen with multi-touch functionality (touchscreen)
• User-friendly interface similar to that of a smartphone
• Measurement at wavelengths 1310 nm, 1550 nm, 1625 nm
• Dynamics 32/30 dB
• Light source and power meter function for transmission measurements
• Visual VFL fault locator for basic optical line diagnostics
• Detailed analysis of the entire optical path up to 80 km long
• Assistance in verification of events and faults: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to verify "Pass/Fail"
• Possibility to create measurement reports pdf/xls
• Function of twisted pair cable tester and copper cable identification
• Reflectometer and fibre optic connection tester
• 5-inch screen with multi-touch functionality (touchscreen)
• User-friendly interface similar to that of a smartphone
• Measurement at wavelengths 1310 nm, 1550 nm, 1625 nm
• Dynamics 32/30 dB
• Light source and power meter function for transmission measurements
• Visual VFL fault locator for basic optical line diagnostics
• Detailed analysis of the entire optical path up to 80 km long
• Assistance in verification of events and faults: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to verify "Pass/Fail"
• Possibility to create measurement reports pdf/xls
• Function of twisted pair cable tester and copper cable identification
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – SC/APC
• Functional case
• Length: 150 m
• Connectors: SC/APC – SC/APC
• Functional case
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 500 m
• Connectors: SC/APC – SC/APC
• Functional case
• Length: 500 m
• Connectors: SC/APC – SC/APC
• Functional case
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – SC/UPC
• Functional case
• Length: 150 m
• Connectors: SC/APC – SC/UPC
• Functional case
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – LC/UPC
• Functional case
• Length: 150 m
• Connectors: SC/APC – LC/UPC
• Functional case
ULTIMODE VFL-V1-10 visual fault locator is designed to diagnose problems with fibre optic cabling.
• Generated light with a wavelength of 650 nm
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – fixed and pulsed
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – fixed and pulsed
Adapter 2.5 -> 1.25 mm
• Reduction 2.5 mm - > 1.25 mm
• Fits visual fault locators, meters, etc.
• Fits visual fault locators, meters, etc.
ULTIMODE VFL-V3-15 visual fault locator is designed to diagnose problems with fibre optic cabling. It emits visible light with a wavelength of 650 nm (red), which, when introduced into the fibre, escapes at excessive bends or fractures.
• Generated light with a wavelength of 650 nm
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester
The ULTIMODE M-023M media converter allows to change the transmission medium from STP/UTP twisted pair to multimode optical fibre.
• Ethernet transmission 10/100 Mbps
• 2 multimode fibers
• Wavelength 1300 nm
• Max. transmission distance 2 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
• 2 multimode fibers
• Wavelength 1300 nm
• Max. transmission distance 2 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
The ULTIMODE M-023G media converter allows to change the transmission medium from STP/UTP twisted pair to multimode optical fibre.
• Ethernet transmission 10/100/1000 Mbps
• 2 multimode fibers
• 1300 nm wavelength
• Max. transmission distance: 2 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
• 2 multimode fibers
• 1300 nm wavelength
• Max. transmission distance: 2 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
The ULTIMODE M-203G media converter allows to change the transmission medium from STP/UTP twisted pair to single-mode optical fibre.
• Ethernet transmission 10/100/1000 Mbps
• 2 single-mode fibers
• Wavelength: 1310 nm
• Max. transmission distance 20 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
• 2 single-mode fibers
• Wavelength: 1310 nm
• Max. transmission distance 20 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
The ULTIMODE M-403M media converter allows to change the transmission medium from STP/UTP twisted pair to single-mode optical fibre.
• Ethernet transmission 10/100 Mbps
• 2 single-mode fibers
• Wavelength: 1310 nm
• Max. transmission distance 40 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
• 2 single-mode fibers
• Wavelength: 1310 nm
• Max. transmission distance 40 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
![ULTIMODE M-207M media converter - single-mode fibre up to 20 km [2 pieces]](https://www.dipol.com.pl/img/thumbnails/l11521+.jpg/876c8b9d579f97f174a78294b70715da.jpg)
The ULTIMODE M-207M set of media converters allows to change the transmission medium from twisted-pair STP/UTP to single-mode optical fibre and vice versa.
• Ethernet transmission 10/100 Mbps
• WDM transmission: 1 single mode fiber
• Wavelength: 1310/1550 nm
• Max. transmission distance: 20 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
• WDM transmission: 1 single mode fiber
• Wavelength: 1310/1550 nm
• Max. transmission distance: 20 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
![ULTIMODE M-207G 1 Gbps media converter - single-mode fibre up to 20 km [2 pieces]](https://www.ostelsat.hu/img/thumbnails/l11525+.jpg/13c7c8a9da94c7c57a1fe38bcfba60c8.jpg)
ULTIMODE M-207G media converter set allows to change the transmission medium from twisted pair STP/UTP to single mode fiber and vice versa.
• Ethernet transmission 10/100/1000 Mbps
• WDM transmission: 1 single mode fiber
• Wavelength 1310/1550 nm
• Max transmission distance: 20 km
• LEDs indicating the correct operation of the device
• Very easy installation (plug and play)
• Power supply included
• WDM transmission: 1 single mode fiber
• Wavelength 1310/1550 nm
• Max transmission distance: 20 km
• LEDs indicating the correct operation of the device
• Very easy installation (plug and play)
• Power supply included
The ULTIMODE M-407M set of media converters allows to change the transmission medium from twisted-pair STP/UTP to single-mode optical fibre and vice versa.
• Ethernet transmission 10/100 Mbps
• WDM transmission: 1 single mode fiber
• Wavelength: 1310/1550 nm
• Max. transmission distance: 40 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
• WDM transmission: 1 single mode fiber
• Wavelength: 1310/1550 nm
• Max. transmission distance: 40 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
The ULTIMODE M-407M-2 media converter set allows to change the transmission medium from twisted-pair STP/UTP to single-mode optical fibre and vice versa.
• Ethernet transmission 10/100 Mbps
• WDM transmission: 1 single mode fiber
• Wavelength: 1310/1550 nm
• Max. transmission distance: 20 km
• Built-in 2-port switch on one of the devices
• LEDs to indicate correct operation of the device
• Very easy installation (plug and play)
• Power supply included
• WDM transmission: 1 single mode fiber
• Wavelength: 1310/1550 nm
• Max. transmission distance: 20 km
• Built-in 2-port switch on one of the devices
• LEDs to indicate correct operation of the device
• Very easy installation (plug and play)
• Power supply included
The ULTIMODE M-1G/SFP media converter allows to change the transmission medium from STP/UTP twisted pair to single-mode or multimode optical fibre.
• 1 x 10/100/1000 Mb/s Ethernet port (RJ-45)
• SFP slot (IEEE 802.3z 1000Base-FX)
• LEDs indicating operation status
• Easy installation (plug and play)
• External AC/DC adapter included
• SFP slot (IEEE 802.3z 1000Base-FX)
• LEDs indicating operation status
• Easy installation (plug and play)
• External AC/DC adapter included
ULTIMODE M-1G/SFP/POE media converter allows you to change the transmission medium from twisted-pair STP/UTP to single-mode or multimode optical fiber. PoE function.
• Ethernet transmission 10/100/1000 Mbps
• SFP slot (IEEE 802.3z 1000Base-FX)
• PoE 802.3af/at
• LEDs to indicate correct operation of the device
• Very easy installation (plug and play)
• Power adapter included
• SFP slot (IEEE 802.3z 1000Base-FX)
• PoE 802.3af/at
• LEDs to indicate correct operation of the device
• Very easy installation (plug and play)
• Power adapter included
A compact Gigabit Ethernet-SFP converter with a wide supply voltage range of 12-58 V.
• 10/100/1000 autonegotiation on LAN port + PoE
• Power supply via screw connector (Vin) wide input voltage range
• Easy and quick commissioning without configuring parameters
• Very low power consumption (< 1.5 W)
• Small module size
• Power supply via screw connector (Vin) wide input voltage range
• Easy and quick commissioning without configuring parameters
• Very low power consumption (< 1.5 W)
• Small module size
ULTIMODE G-10G/SFP+ media converter allows you to change the transmission medium from twisted-pair STP/UTP to single-mode or multimode optical fiber.
• Ethernet transmission 100/1000/2500/10000 Mbps in the electrical port
• SFP+ slot
• LEDs indicating correct operation of the device
• Very easy installation (plug and play)
• Power supply included
• SFP+ slot
• LEDs indicating correct operation of the device
• Very easy installation (plug and play)
• Power supply included
5 V/1 A power supply for ULTIMODE media converters.
• DC 5 V output voltage
• Maximum output current 1 A
• Plug 2.1./5.5
• Polarisation "+" inside
• Maximum output current 1 A
• Plug 2.1./5.5
• Polarisation "+" inside
The ULTIMODE media converter adapter allows up to 14 converters to be mounted in a rack.
• Mounting of up to 14 media converters in a rack
• Each slot is equipped with a separate power supply path
• Mechanical cooling - two fans
• Redundant power supply
• Plug and Play support
• Each slot is equipped with a separate power supply path
• Mechanical cooling - two fans
• Redundant power supply
• Plug and Play support
The SFP-011M ULTIMODE module is used to extend the capabilities of network devices with the possibility of implementing transmission via optical fibre.
• Duplex transmission (2 optical fibres)
• Multimode fibres
• Wavelength 850 nm
• Transmission speed up to 155 Mbps
• Max. transmission distance up to 550 m
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• Multimode fibres
• Wavelength 850 nm
• Transmission speed up to 155 Mbps
• Max. transmission distance up to 550 m
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
Optical SFP module ULTIMODE-023G cooperates with multimode fibers up to 2 km long, at data transmission speeds up to 1.25 Gb/s.
• Duplex transmission (2 optical fibres)
• Multimode fibres
• Wavelength 1300 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 2 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• Multimode fibres
• Wavelength 1300 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 2 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
The ULTIMODE SFP-023M module is used to extend the capabilities of network devices with the implementation of transmission via fiber optics.
• Transmission type: duplex (2 optical fibers)
• Fiber: multimode
• Wavelength: 1300 nm
• Transmission rate: up to 155 Mbps
• Max. transmission distance: up to 2 km
• Type of optical connectors: LC
• Compatible with devices: ULTIMODE, TP-LINK and others
• Fiber: multimode
• Wavelength: 1300 nm
• Transmission rate: up to 155 Mbps
• Max. transmission distance: up to 2 km
• Type of optical connectors: LC
• Compatible with devices: ULTIMODE, TP-LINK and others
The SFP-203M ULTIMODE module is used to extend the capabilities of network devices with the possibility of implementing transmission via optical fibre.
• Duplex transmission (2 optical fibers)
• Single-mode fibers
• Wavelength 1310 nm
• Transmission speed up to 155 Mb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• Single-mode fibers
• Wavelength 1310 nm
• Transmission speed up to 155 Mb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
The SFP-203G ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• Duplex transmission (2 optical fibres)
• Single mode fibres
• Wavelength 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• Single mode fibres
• Wavelength 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
The SFP-203/5 ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
The SFP-205/3G ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1550 nm, Rx: 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1550 nm, Rx: 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
Optical SFP module ULTIMODE-203/5G LC cooperates with a single-mode fiber up to 20 km long, at data transmission speeds up to 1.25 Gb/s.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with Ultimode, TP-LINK and other devices
The SFP-205/3G ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1550 nm, Rx: 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1550 nm, Rx: 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with Ultimode, TP-LINK and other devices
The ULTIMODE SFP-403/5G module is used to extend the capabilities of network devices with the implementation of transmission via fiber optics.
• Transmission type: WDM (1 fiber optic)
• Fiber: single mode
• Tx: 1310 nm, Rx: 1550 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
• Fiber: single mode
• Tx: 1310 nm, Rx: 1550 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
The ULTIMODE SFP-405/3G module is used to extend the capabilities of network devices with the implementation of transmission via fiber optics.
• Transmission: type WDM (1 fiber optic)
• Fiber: single mode
• Tx: 1550 nm, Rx: 1310 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
• Fiber: single mode
• Tx: 1550 nm, Rx: 1310 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
ULTIMODE's SFP+ SR module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• Duplex transmission (2 optical fibres)
• Multimode fibres
• Wavelength 850 nm
• Transmission speed up to 10 Gbps
• Max. transmission distance up to 300 m
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
• Multimode fibres
• Wavelength 850 nm
• Transmission speed up to 10 Gbps
• Max. transmission distance up to 300 m
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
ULTIMODE's SFP+ LR module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• Duplex transmission (2 optical fibres)
• Single mode fibres
• Wavelength 1310 nm
• Transmission speed up to 10 Gbps
• Max. transmission distance up to 10 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
• Single mode fibres
• Wavelength 1310 nm
• Transmission speed up to 10 Gbps
• Max. transmission distance up to 10 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
The ULTIMODE SFP+ module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• BiDi/WDM transmission (1 optical fiber)
• Single-mode fiber
• Wavelength 1270/1330 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
• Single-mode fiber
• Wavelength 1270/1330 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
The ULTIMODE SFP+ module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• BiDi/WDM transmission (1 optical fiber)
• Single-mode fiber
• Wavelength 1330/1270 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
• Single-mode fiber
• Wavelength 1330/1270 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
The OTM302T optical transmitter is used to create fiber optic RF/SAT systems and the implementation of transmissions at a wavelength of 1310 nm.
• FP laser
• 1310 nm wavelength
• +6 dBm optical output power
• Built-in RF converter
• Die-cast housing guarantees high level of screening – class A
• AGC – automatic gain control stabilizes the signal level
• LEDs on the housing make it much easier to properly configure the entire system
• 1310 nm wavelength
• +6 dBm optical output power
• Built-in RF converter
• Die-cast housing guarantees high level of screening – class A
• AGC – automatic gain control stabilizes the signal level
• LEDs on the housing make it much easier to properly configure the entire system
The OTF302 6F31 E TERRA optical transmitter is used to create TV/SAT systems using optical fibre technology and transmission at 1310 nm wavelength (transmission window II).
• FP type laser
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
TERRA's LWO102 4F31 E optical LNB is used to create SAT systems using fiber optic technology.
• FP laser
• Wavelength 1310 nm
• Power at optical output +4 dBm
• Single-mode fiber
• Type of optical connector: FC/UPC
• Wavelength 1310 nm
• Power at optical output +4 dBm
• Single-mode fiber
• Type of optical connector: FC/UPC
The OTF302 6F55 E TERRA optical transmitter is used to create TV/SAT systems using optical fibre technology and transmission at 1550 nm wavelength (transmission window III).
• FP laser
• Wavelength 1550 nm
• Optical output power +6 dBm
• Open casing guaranteeing high level of shielding - class A
• AGC - automatic gain control to stabilise the signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• Wavelength 1550 nm
• Optical output power +6 dBm
• Open casing guaranteeing high level of shielding - class A
• AGC - automatic gain control to stabilise the signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
The ORF202 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal. Wideband type output.
• Wavelength 1100...1650 nm
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
The ORQ302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E A3031 or OTF302 6F55 E A3055 transmitter into an electrical signal. QUATRO + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
The ORF302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal. Wideband + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
The ORQ302F E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
The ORD301F E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring high level of shielding – class A
• OLC – automatic control stabilizing signal level
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring high level of shielding – class A
• OLC – automatic control stabilizing signal level
The ORL302F E optical receiver enables the conversion of optical signals into Legacy, Wideband and Radio/DVB-T2 electrical signals.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open casing to ensure a high level of shielding – class A
• OLC - automatic control to stabilize the signal level
• LEDs on the casing greatly facilitating the proper configuration of the entire system
• Acceptable power level at the optical input -15...-5 dBm
• Open casing to ensure a high level of shielding – class A
• OLC - automatic control to stabilize the signal level
• LEDs on the casing greatly facilitating the proper configuration of the entire system
The optical SAT/RTV OTX 1310 KIT from TRIAX allows the introduction of DVB-S/S2 satellite signals and DVB-T2 digital terrestrial TV, DAB radio and FM radio into a fibre optic installation.
• Fiber optic cabling
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
The QUATRO converter has been designed for output replication of satellite IF signals and DVB-T/T2 and FM/DAB digital terrestrial TV antennas. It is powered from a multiswitch.
• Receiver works with TOU 232 KIT and LNB TOL32
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
The QUAD converter has been designed for output replication of satellite IF signals and DVB-T/T2 and FM/DAB digital terrestrial antennas.
• Receiver works with TOU 232 KIT and LNB TOL32
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
FOS 102 E optical splitter is an element used to divide the optical signal into 2 paths.
• Dividing the signal into 2 paths
• FC/PC sockets
• Box type housing
• Attenuation of 3.9 dB
• FC/PC sockets
• Box type housing
• Attenuation of 3.9 dB
FOS 104 E optical splitter is an element used to divide the optical signal into 4 paths.
• Dividing the signal into 4 paths
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
FOS 108 E optical splitter is an element used to divide the optical signal into 8 paths.
• Dividing the signal into 8 paths
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
The FTTH OD-012 H optical receiver (SC/APC optical connector) is designed to convert optical signals into electrical signals in the 47-862/1006 MHz band.
• Optical connector: SC/APC
• Open housing for high screening efficiency
• Output bandwidth 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Range of signal level at optical input: -9...2 dBm
• Maximum output level: 108 dBµV
• Open housing for high screening efficiency
• Output bandwidth 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Range of signal level at optical input: -9...2 dBm
• Maximum output level: 108 dBµV
The OD-004A optical node (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-2400 MHz band.
• Compact dimensions
• Output bandwidth 47-2400 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Connector: optical: SC/APC
• Output bandwidth 47-2400 MHz
• Microprocessor-based AGC (automatic gain control) based on optical signal level
• Connector: optical: SC/APC
The OD-003 optical node (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-1002 MHz band.
• Compact size
• Expanded output bandwidth 47-1002 MHz
• Very high sensitivity: -10...3 dBm
• Microprocessor-based automatic gain control (AGC)
• Maximum output signal level: 80 dBμV
• LED display
• Connectors: optical - SC/APC
• Expanded output bandwidth 47-1002 MHz
• Very high sensitivity: -10...3 dBm
• Microprocessor-based automatic gain control (AGC)
• Maximum output signal level: 80 dBμV
• LED display
• Connectors: optical - SC/APC
The OD-005P optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-862 MHz band.
• Compact size
• Die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Output bandwidth 47-862 MHz
• Sensitivity -6 ... 0 dBm
• Maximum output level 107 dBμV
• Microprocessor-based AGC (automatic gain control) based on signal level
• Die-cast housing provides high efficiency shielding to prevent interfering signals from penetrating inside the unit
• Output bandwidth 47-862 MHz
• Sensitivity -6 ... 0 dBm
• Maximum output level 107 dBμV
• Microprocessor-based AGC (automatic gain control) based on signal level
The OD-006 compact optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-1006 MHz band.
• Compact-size (7 cm long) optical DVB-T/DVB-C receiver
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-1006 MHz
• Sensitivity: -6...0 dBm
• Max output level: 80 dBμV
• AGC based on optical input level
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-1006 MHz
• Sensitivity: -6...0 dBm
• Max output level: 80 dBμV
• AGC based on optical input level
The OD-007 H compact optical receiver (SC/APC optical connector) is designed to convert an optical signal into an electrical signal in the 47-2400 MHz band.
• Compact size
• Remotely powered from a 10 V...20 V / 60 mA source
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-2400 MHz
• AGC based on optical input level
• Optical connector: SC/APC
• Remotely powered from a 10 V...20 V / 60 mA source
• Die-cast housing providing high screening efficiency by preventing the penetration of interfering signals to the unit
• Output RF range: 47-2400 MHz
• AGC based on optical input level
• Optical connector: SC/APC
The mo418 4D31 optical transmitter with a power of 1x6 dBm is used to transmit RTV/SAT TV signals using the optical fibre medium for wavelengths of 1310 nm.
• The transmitter allows the distribution of DVB-S/S2 and CATV signals
• Input frequency range: 47-2400 MHz
• Optical output power 6 dBm
• AGC function (automatic gain control)
• Digitally programmable with buttons located on the front panel
• Two-position display
• Multiple mounting options (DIN rail, façade)
• Connectors: 3xRF - input/output and test output - type F, 1x optical - SC/APC
• Input frequency range: 47-2400 MHz
• Optical output power 6 dBm
• AGC function (automatic gain control)
• Digitally programmable with buttons located on the front panel
• Two-position display
• Multiple mounting options (DIN rail, façade)
• Connectors: 3xRF - input/output and test output - type F, 1x optical - SC/APC
The mo428 4D31 optical transmitter with a power of 2x6 dBm is used for the transmission of RTV/SAT TV signals using the optical fibre medium for wavelengths of 1310 nm.
• The transmitter allows the distribution of DVB-S/S2 and CATV signals
• Input frequency range: 47-2400 MHz
• Optical output power 2x6 dBm
• AGC function (automatic control of signal amplification)
• Digitally programmable with buttons located on the front panel
• Two-position display
• Multiple mounting options (DIN rail, façade)
• Connectors: 3xRF - input/output and test output - type F, 2x optical - SC/APC
• Input frequency range: 47-2400 MHz
• Optical output power 2x6 dBm
• AGC function (automatic control of signal amplification)
• Digitally programmable with buttons located on the front panel
• Two-position display
• Multiple mounting options (DIN rail, façade)
• Connectors: 3xRF - input/output and test output - type F, 2x optical - SC/APC
The mo418 4F31 TERRA optical transmitter is designed for transmitting TV signals via fiber optic medium.
• Transmitter enables distribution of DVB-S/S2 and CATV signals
• Laser type - FP (Fabry-Perot)
• Input frequency range: 47-2400 MHz
• RF signal loop input
• AGC function (automatic signal gain control)
• Maximum input level: 85 dBμV
• Input level adjustment 0...-15 dB in 1 dB steps
• Device programmable digitally using buttons located on the front panel
• Two-position display
• Several mounting options (DIN rail, facade)
• Connectors: 3xRF: input/output and test output - type F, 1x optical - SC/APC
• Laser type - FP (Fabry-Perot)
• Input frequency range: 47-2400 MHz
• RF signal loop input
• AGC function (automatic signal gain control)
• Maximum input level: 85 dBμV
• Input level adjustment 0...-15 dB in 1 dB steps
• Device programmable digitally using buttons located on the front panel
• Two-position display
• Several mounting options (DIN rail, facade)
• Connectors: 3xRF: input/output and test output - type F, 1x optical - SC/APC
The L7102B fibre optic cable is a flat duplex cable, i.e. a dual-fibre fibre optic cable for indoor applications.
• Lightweight but resistant to mechanical damage
• 2 single-mode fibres
• Fibres in G.657A1 standard with reduced bending radius
• Easy to process without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: white
• 2 single-mode fibres
• Fibres in G.657A1 standard with reduced bending radius
• Easy to process without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: white
The L7102B fibre optic cable is a flat duplex cable, i.e. a dual-fibre fibre optic cable for indoor applications.
• Lightweight but resistant to mechanical damage
• 2 single-mode fibres
• Fibres in G.657A1 standard with reduced bending radius
• Easy to process without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: white
• 2 single-mode fibres
• Fibres in G.657A1 standard with reduced bending radius
• Easy to process without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: white
2-fiber subscriber cable in B2ca sheath – ideal for installation in multi-family housing and other facilities with duplex connections.
• Lightweight, but resistant to mechanical damage
• 2 single-mode fibers
• Fibers in G.657A1 standard with reduced bending radius
• Easy processing without the need for dedicated tools
• LSOH sheath
• CPR class: B2ca
• Color: white
• 2 single-mode fibers
• Fibers in G.657A1 standard with reduced bending radius
• Easy processing without the need for dedicated tools
• LSOH sheath
• CPR class: B2ca
• Color: white
2-fibre subscriber cable in B2ca sheath – ideal for installation in multi-family housing and other facilities with duplex connections.
• Lightweight, but resistant to mechanical damage
• 2 single-mode fibres
• Fibers in G.657A1 standard with reduced bending radius
• Easy processing without the need for dedicated tools
• LSOH sheath
• CPR class: B2ca
• Color: white
• 2 single-mode fibres
• Fibers in G.657A1 standard with reduced bending radius
• Easy processing without the need for dedicated tools
• LSOH sheath
• CPR class: B2ca
• Color: white
ULTIMODE FC.E-2SM is a universal fiber optic cable in LSOH jacket, so it can be used outdoors and indoors.
• Very convenient to install
• 2 single-mode fibres
• Fibres in G.657A2 standard with reduced bending radius
• Easily processed without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: black
• 2 single-mode fibres
• Fibres in G.657A2 standard with reduced bending radius
• Easily processed without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: black
![Self-supporting Universal FTTx Cable: SM 2J 9/125 (2x G.657A2, LSOH, black) [1000 m]](https://www.dipolnet.cz/img/thumbnails/l7102_1000+++.jpg/f415cbd25e0e56ab9d93b3ab372aa54c.jpg)
ULTIMODE FC.E-2SM is a universal fiber optic cable in LSOH jacket, so it can be used outdoors and indoors.
• Very convenient to install
• 2 single-mode fibres
• Fibres in G.657A2 standard with reduced bending radius
• Easily processed without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: black
• 2 single-mode fibres
• Fibres in G.657A2 standard with reduced bending radius
• Easily processed without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: black
L7202 fiber optic cable is a universal cable in LS0H sheath. So it can be used in outdoor and indoor areas.
• Very convenient to install
• 2 single-mode fibers
• Fibers in G.657A2 standard with reduced bending radius
• Easy to process without special tools
• LSOH sheath
• 2 single-mode fibers
• Fibers in G.657A2 standard with reduced bending radius
• Easy to process without special tools
• LSOH sheath
DRAKA U-DQ(ZN)BH fibre optic cable is a universal cable that can be used for indoor and outdoor connections.
• Number of fibres: 4
• Fibre type: multimode
• Fibre standard: OM3
• Can be used indoors and outdoors
• FireBur LSZH coating
• UV resistant
• Maximum tensile strength 2000 N.
• Glass fibres to reinforce the cable and provide basic anti-rodent protection
• Ripcord for easy tearing of outer sheath
• Very easy to handle
• CPR class: Eca
• Fibre type: multimode
• Fibre standard: OM3
• Can be used indoors and outdoors
• FireBur LSZH coating
• UV resistant
• Maximum tensile strength 2000 N.
• Glass fibres to reinforce the cable and provide basic anti-rodent protection
• Ripcord for easy tearing of outer sheath
• Very easy to handle
• CPR class: Eca
Optix AirFlow S-QOTKSdD is a self-supporting cable designed for use in FTTx systems. It is possible to build spans of up to 80 m.
• Very durable
• Application: outdoor
• Fibre type: single-mode
• Fibre standard: G.657A2
• Number of fibres: 2
• Fibre length max. 80 m
• Lightweight, convenient to place
• Application: outdoor
• Fibre type: single-mode
• Fibre standard: G.657A2
• Number of fibres: 2
• Fibre length max. 80 m
• Lightweight, convenient to place
Optix AirFlow S-QOTKSdD is a self-supporting cable designed for use in FTTx systems. It has 4 fibres. It is possible to build spans of 80 m.
• Very tough
• Applications: outdoor
• Fiber type: single mode
• Fiber standard: G.657A2
• Number of fibers: 4
• Max. length of span 80 m
• Lightweight, easy to install
• Applications: outdoor
• Fiber type: single mode
• Fiber standard: G.657A2
• Number of fibers: 4
• Max. length of span 80 m
• Lightweight, easy to install
Optix AirFlow S-QOTKSdD is a self-supporting cable designed for use in FTTx systems. It has 8 fibres. It is possible to build spans of 80 m.
• Very durable
• Application: outdoor
• Fibre type: single-mode
• Fibre standard: G.657A2
• Number of fibres: 8
• Fibre length max. 80 m
• Lightweight, convenient to lay
• Application: outdoor
• Fibre type: single-mode
• Fibre standard: G.657A2
• Number of fibres: 8
• Fibre length max. 80 m
• Lightweight, convenient to lay
Optix AirFlow S-QOTKSdD is a self-supporting cable designed for use in FTTx systems. It has 12 fibres. It is possible to build spans of 80 m.
• Very durable
• Application: outdoor
• Fibre type: single-mode
• Fibre standard: G.657A2
• Fibre count: 12
• Fibre length max. 80 m
• Lightweight, convenient to lay
• Application: outdoor
• Fibre type: single-mode
• Fibre standard: G.657A2
• Fibre count: 12
• Fibre length max. 80 m
• Lightweight, convenient to lay
DRAKA U-DQ(ZN)BH 4E is a universal fiber-optic cable for indoor and outdoor applications.
• Number of fibres: 4
• Fibre type: Single-mode
• Fibre standard: G.657A1
• Can be used indoors and outdoors
• FireBur LSZH coating
• UV resistant
• Maximum tensile strength 2000 N
• Glass fibres to reinforce the cable and provide basic anti-rodent protection
• Ripcord for easy tearing of outer sheath
• Very easy to handle
• CPR class: Eca
• Fibre type: Single-mode
• Fibre standard: G.657A1
• Can be used indoors and outdoors
• FireBur LSZH coating
• UV resistant
• Maximum tensile strength 2000 N
• Glass fibres to reinforce the cable and provide basic anti-rodent protection
• Ripcord for easy tearing of outer sheath
• Very easy to handle
• CPR class: Eca
DRAKA U-DQ(ZN)BH 8E is a universal fiber-optic cable for indoor and outdoor applications.
• Fibre count: 8
• Fibre type: Single-mode
• Fibre standard: G.657A1
• Can be used indoors and outdoors
• FireBur LSZH coating
• UV resistant
• Maximum tensile strength 2000 N
• Glass fibres to reinforce the cable and provide basic anti-rodent protection
• Ripcord for easy tearing of outer sheath
• Very easy to handle
• CPR class: Eca
• Fibre type: Single-mode
• Fibre standard: G.657A1
• Can be used indoors and outdoors
• FireBur LSZH coating
• UV resistant
• Maximum tensile strength 2000 N
• Glass fibres to reinforce the cable and provide basic anti-rodent protection
• Ripcord for easy tearing of outer sheath
• Very easy to handle
• CPR class: Eca
DRAKA U-DQ(ZN)BH 12E is a universal fiber optic cable for indoor and outdoor applications.
• Fibre count: 12
• Fibre type: Single-mode
• Fibre standard: G.657A1
• Can be used indoors and outdoors
• FireBur LSZH coating
• UV resistant
• Maximum tensile strength 2000 N
• Glass fibres to reinforce the cable and provide basic anti-rodent protection
• Ripcord for easy tearing of outer sheath
• Very easy to handle
• CPR class: Eca
• Fibre type: Single-mode
• Fibre standard: G.657A1
• Can be used indoors and outdoors
• FireBur LSZH coating
• UV resistant
• Maximum tensile strength 2000 N
• Glass fibres to reinforce the cable and provide basic anti-rodent protection
• Ripcord for easy tearing of outer sheath
• Very easy to handle
• CPR class: Eca
The ZW-NOTKtsdD/U-DQ(ZN)BH 8G is a universal cable that can be used for indoor and outdoor connections.
• Fiber standard: OM3
• Can be used indoors and outdoors
• LSZH sheath
• UV resistant
• Maximum tensile strength 2000 N
• Glass fibers to reinforce the cable and provide basic anti-rodent protection
• Ripcord for easy tearing of the outer sheath
• Very convenient to work with
• CPR class: Eca
• Can be used indoors and outdoors
• LSZH sheath
• UV resistant
• Maximum tensile strength 2000 N
• Glass fibers to reinforce the cable and provide basic anti-rodent protection
• Ripcord for easy tearing of the outer sheath
• Very convenient to work with
• CPR class: Eca
Fibertechnic DAC 2J 9/125 G.657A1 cable with 2 fibers is designed for direct underground installation.
• 2 fibers G.657A1
• PE sheath and design to allow cable to be installed directly in the ground
• Resistance to crushing 2500 N
• Maximum tensile strength of 1000 N
• PE sheath and design to allow cable to be installed directly in the ground
• Resistance to crushing 2500 N
• Maximum tensile strength of 1000 N
Fiber optic cable for direct underground installation. The cable has an PE sheath with high crushing resistance (4000 N). Cables with such sheath are also resistant to low temperatures.
• 4 G.652D fibres
• HDPE sheath and construction allowing the cable to be laid directly in the ground
• Crush resistance 4000 N
• UV resistant
• Maximum tensile strength 1200 N
• 2 FRP rods
• Central tube filled with hydrophobic gel
• HDPE sheath and construction allowing the cable to be laid directly in the ground
• Crush resistance 4000 N
• UV resistant
• Maximum tensile strength 1200 N
• 2 FRP rods
• Central tube filled with hydrophobic gel
Fiber optic cable for direct underground installation. The cable has an PE sheath with high crushing resistance (4000 N). Cables with such sheath are also resistant to low temperatures.
• 12 G.652D fibres
• PE sheath and design for direct underground installation
• Crush resistance 4000 N
• Maximum tension force 1200 N
• 2 FRP bars 0.9 mm
• Central tube filled with hydrophobic gel
• PE sheath and design for direct underground installation
• Crush resistance 4000 N
• Maximum tension force 1200 N
• 2 FRP bars 0.9 mm
• Central tube filled with hydrophobic gel
Fiber optic cable for direct underground installation. The cable has an HDPE sheath with high crushing resistance (4000 N). Cables with such sheath are also resistant to low temperatures.
• 24 G.652D fibres
• HDPE sheath and design for direct underground installation
• UV resistant
• Crush resistance 4000 N
• Maximum tension force 1200 N
• 2 FRP bars 0.5 mm
• Central tube filled with hydrophobic gel
• HDPE sheath and design for direct underground installation
• UV resistant
• Crush resistance 4000 N
• Maximum tension force 1200 N
• 2 FRP bars 0.5 mm
• Central tube filled with hydrophobic gel
DRAKA A-DQ(ZN)B2Y 8SM is a fiber optic cable for outdoor applications. Single-mode 250 μm fibers are contained in a central gel-filled tube.
• Outdoor cable, highly resistant to UV
• Can be laid in conduits and directly in the ground
• Easy to pull - coating provides good slip resistance
• High tensile strength - 3000 N
• Central tube 2.8 mm filled with gel
• 8 single-mode fibres G.652D 9/125 μm
• Glass fibres to reinforce the cable and provide basic anti-rodent protection
• LDPE (low pressure linear polyethylene) sheath
• Fibres in the sheath with a diameter of 250 μm
• CPR class: Fca
• Can be laid in conduits and directly in the ground
• Easy to pull - coating provides good slip resistance
• High tensile strength - 3000 N
• Central tube 2.8 mm filled with gel
• 8 single-mode fibres G.652D 9/125 μm
• Glass fibres to reinforce the cable and provide basic anti-rodent protection
• LDPE (low pressure linear polyethylene) sheath
• Fibres in the sheath with a diameter of 250 μm
• CPR class: Fca
DRAKA A-DQ(ZN)B2Y SM is a fiber-optic cable for outdoor applications. Its single-mode fibers are placed in a gel-filled central tube.
• Outdoor cable, highly resistant to UV
• Can be laid in tele-technical ducts
• Easy to pull - coating provides good slip
• High tensile strength - 3000 N
• Central tube 2.8 mm filled with gel
• 12 single-mode fibres G.652D 9/125 μm
• Glass fibres to reinforce the cable and provide basic anti-rodent protection
• LDPE (low pressure linear polyethylene) sheath
• Fibres in the sheath with a diameter of 250 μm
• CPR class: Fca
• Can be laid in tele-technical ducts
• Easy to pull - coating provides good slip
• High tensile strength - 3000 N
• Central tube 2.8 mm filled with gel
• 12 single-mode fibres G.652D 9/125 μm
• Glass fibres to reinforce the cable and provide basic anti-rodent protection
• LDPE (low pressure linear polyethylene) sheath
• Fibres in the sheath with a diameter of 250 μm
• CPR class: Fca
DRAKA A-DQ(ZN)B2Y SM is a fiber-optic cable for outdoor applications. Its single-mode fibers are placed in a gel-filled central tube.
• Outdoor cable, highly resistant to UV
• Can be laid in tele-technical ducts
• Easy to pull - coating provides good slip
• High tensile strength - 3000 N
• Central tube 2.8 mm filled with gel
• 24 single-mode fibres G.652D 9/125 μm
• Glass fibres to reinforce the cable and provide basic anti-tangle protection
• LDPE (low pressure linear polyethylene) sheath
• Fibres in the sheath with a diameter of 250 μm
• CPR class: Fca
• Can be laid in tele-technical ducts
• Easy to pull - coating provides good slip
• High tensile strength - 3000 N
• Central tube 2.8 mm filled with gel
• 24 single-mode fibres G.652D 9/125 μm
• Glass fibres to reinforce the cable and provide basic anti-tangle protection
• LDPE (low pressure linear polyethylene) sheath
• Fibres in the sheath with a diameter of 250 μm
• CPR class: Fca
The adapter is designed for mounting in the ALU 500 and ALU 600 racks. It is used for mounting the B16 joint box.
• Material: aluminum
• Spacing of the joint box screw holes: 158 mm x 82 mm
• Spacing of the joint box screw holes: 158 mm x 82 mm
The adapter is designed for mounting in the ALU 500 and ALU 600 racks. It is used for mounting the GFP-8E joint box.
• Material: aluminum
The ULTIMODE MT-524 pull-out panel is designed for use in optical fibre networks as a distribution point and connection point.
• Panel for 19'' rack
• Size 1U
• Telescopic slides
• Large tray for 24 splices
• Front plates can be purchased for various types of adapters
• Wide cable entry hole
• Large guides for tube/fibre supply
• Size 1U
• Telescopic slides
• Large tray for 24 splices
• Front plates can be purchased for various types of adapters
• Wide cable entry hole
• Large guides for tube/fibre supply
OPTISteel 1U 12xSC simplex / LC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 12 or 24 fibre terminations.
• Front panel for 12 SC simplex / LC duplex adapters
• Material: 1 mm thick steel
• Powder coated (black colour)
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 12xSC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows the implementation of 24 fibre optic fibre terminations.
• Front panel for 12 SC duplex adapters
• Material: 1 mm thick steel
• Powder coated (black colour)
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 24xSC simplex / LC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 24 or 48 fibre terminations.
• Front panel for 24 SC simplex / LC duplex adapters
• Material: 1 mm thick steel
• Powder coated (black colour)
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 24xSC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 48 fibre terminations.
• Front panel for 24 SC duplex adapters
• Material: 1 mm thick steel
• Powder coated (black colour)
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 12xSC simplex / LC duplex drop-out fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 12 or 24 fibre terminations.
• Front panel for 12 SC simplex / LC duplex adapters
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 12xSC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows the implementation of 24 fibre optic fibre terminations.
• Front panel for 12 SC duplex adapters
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 24xSC simplex / LC duplex drop-out fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 24 or 48 fibre terminations.
• Front panel for 24 SC simplex / LC duplex adapters
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
The OPTISteel 1U 24xSC duplex fibre optic switch is designed for installation in 19" rack cabinets and racks. It allows 48 fibre terminations.
• Front panel for 24 SC duplex adapters
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
The ULTIMODE MT-548 pull-out panel is designed for use in optical fibre networks as a distribution point and connection point.
• Panel for 19'' rack
• 2U size
• Telescopic slides
• Two large cassettes for 48 splices
• Front plates for various types of adapters can be purchased
• Wide opening for cable entry
• Large guides to keep tubes/fibres stocked
• 2U size
• Telescopic slides
• Two large cassettes for 48 splices
• Front plates for various types of adapters can be purchased
• Wide opening for cable entry
• Large guides to keep tubes/fibres stocked
ULTIMODE TB-02H cable junction box allows to terminate a subscriber's optical fibre line. It can terminate max. 4 fibers.
• Optical fiber termination box for indoor applications
• For connecting up to 4 LC or 2 SC/FC connectors
• Possibility of securing mechanical splice ULTIMODE MS-1 L5550
• Ease of installation, operation and maintenance
• For connecting up to 4 LC or 2 SC/FC connectors
• Possibility of securing mechanical splice ULTIMODE MS-1 L5550
• Ease of installation, operation and maintenance
ULTIMODE TB-02H-1 cable junction box allows to terminate a subscriber's optical fibre line. It can terminate max. 4 fibers.
• Small in size
• Space for 2 SC simples/LC duplex adapters
• Removable front cover
• Space for 2 SC simples/LC duplex adapters
• Removable front cover
Subscriber outlet designed for wall mounting. Used in FTTH networks for terminating subscriber lines. Low depth and modern design.
• Compact size
• Space for 2 SC simples/LC duplex adapters (no flange)
• DAC input and 7mm microtube (outer diameter)
• Clips for DAC and microtube clamps
• Intuitive fiber organization
• Divided into 2 zones: switching and splicing section
• Space for 2 SC simples/LC duplex adapters (no flange)
• DAC input and 7mm microtube (outer diameter)
• Clips for DAC and microtube clamps
• Intuitive fiber organization
• Divided into 2 zones: switching and splicing section
ULTIMODE TB-04H cable junction box enables termination of a subscriber's fibre optic line. It can terminate up to 8 fibers.
• Space for 4 SC simplex/LC duplex adapters
• Capable of securing 4 fibre splices
• Flip-up mounting tray
• Removable front cover
• Capable of securing 4 fibre splices
• Flip-up mounting tray
• Removable front cover
HERMES surface-mounted subscriber outlet, is an element used for connecting fiber optic cable ends in FTTH networks. Ideal solution in places where you have to connect max. 4 users.
• Outdoor and indoor use
• Protection rating IP 54 and IK-10
• Maximum capacity: 4 SC simplex adapters (without flange), 12 splices
• Special place for gas-tight connector for a 7 mm tube
• Inputs with two cables or microtubes 7 and 12 mm
• Possibility to exit with 4 cables along the wall or drill through the wall
• Compact, lightweight design
• Ideal for single-family and low-rise residential buildings (semi-detached houses, tenement houses)
• Material resistant to UV rays – polycarbonate color RAL 7035
• Included set of screws and mounting studs
• Protection rating IP 54 and IK-10
• Maximum capacity: 4 SC simplex adapters (without flange), 12 splices
• Special place for gas-tight connector for a 7 mm tube
• Inputs with two cables or microtubes 7 and 12 mm
• Possibility to exit with 4 cables along the wall or drill through the wall
• Compact, lightweight design
• Ideal for single-family and low-rise residential buildings (semi-detached houses, tenement houses)
• Material resistant to UV rays – polycarbonate color RAL 7035
• Included set of screws and mounting studs
SHARK micro bracket is a type of steel structure used for mounting the HERMES subscriber outlet. It is ideal for securing the access cable supply in the distribution segment.
• Designed for HERMES outlet
• Mounting on a pole
• Max. 20 m of cable reserve (6 mm diameter)
• Mounting on a pole
• Max. 20 m of cable reserve (6 mm diameter)
The industrial grade MINI ODF-DIN distribution frame is designed mainly for fiber optic cable crossing in places with limited space.
• 2x SC duplex or 2x LC quad
• Made of 1 mm steel sheet
• Convenient and quick assembly on DIN rail
• Two holes for cables up to 8 mm in diameter
• Powder painting RAL 7035 gloss
• Convenient silicone bracket for splicing caps
• Dimensions: 70x65x33 mm
• Made of 1 mm steel sheet
• Convenient and quick assembly on DIN rail
• Two holes for cables up to 8 mm in diameter
• Powder painting RAL 7035 gloss
• Convenient silicone bracket for splicing caps
• Dimensions: 70x65x33 mm
The PS-m DIN distribution frame is designed mainly for fiber optic cable crossing in places with limited space.
• Made of 1 mm steel sheet
• Convenient and quick assembly on DIN rail
• Three holes for cables up to 10 mm in diameter
• Powder painted grey
• Convenient bracket for splicing caps
• Dimensions: 85x70x33 mm for safe arrangement of optical fibers
• Convenient and quick assembly on DIN rail
• Three holes for cables up to 10 mm in diameter
• Powder painted grey
• Convenient bracket for splicing caps
• Dimensions: 85x70x33 mm for safe arrangement of optical fibers
The FTTH-DIN junction box is designed for indoor use. It enables fiber optic cable termination from 1 to 4 fibers.
• Modern and innovative design
• High quality material
• Possibility to install SC simplex or LC duplex adapters
• Cable inputs: 1 x diameter max. 12 mm
• High quality material
• Possibility to install SC simplex or LC duplex adapters
• Cable inputs: 1 x diameter max. 12 mm
Optical fibre switch, designed to be mounted on a DIN rail (TH35, TS35, DIN-3), allowing up to 6 SC duplex adapters to be installed.
• DIN rail mounting (TH35)
• Space for 6 SC duplex adapters
• Supports 12 splices
• Colour: grey
• Space for 6 SC duplex adapters
• Supports 12 splices
• Colour: grey
The GFP-4A wall-mounted distribution frame has one input for the trunk cable and 4 outputs for subscriber cables. It is designed for wall mounting.
• The distribution frame is designed for wall mounting
• Space for 4 SC simplex / LC duplex adapters
• Space for 4 splices
• 1 input port
• 4 output ports
• Space for 4 SC simplex / LC duplex adapters
• Space for 4 splices
• 1 input port
• 4 output ports
The GP62DW-7 wall-mounted distribution frame allows for easy organization of fiber optic cables (up to 12 fibers, depending on the installed adapters.)
• Wall-mounted distribution frame
• Space for mounting 4 SC simplex/LC duplex adapters
• Space for 12 splices
• Easy handling of excess fiber
• 1 input port
• 4/8 output ports
• Cover with latches with additional locking screw
• Easy to install, operate and maintain
• Space for mounting 4 SC simplex/LC duplex adapters
• Space for 12 splices
• Easy handling of excess fiber
• 1 input port
• 4/8 output ports
• Cover with latches with additional locking screw
• Easy to install, operate and maintain
The GP62DW-1 wall-mounted distribution frame allows for easy organization of fiber optic cables (up to 16 fibers, depending on the installed adapters.)
• 3 input/output ports
• Cassette for 16 splices
• Space for mounting 8 SC simplex adapters
• Wall mounting
• Cassette for 16 splices
• Space for mounting 8 SC simplex adapters
• Wall mounting
The GP62DW-3 wall-mounted distribution frame allows for easy organization of fiber optic cables (up to 24 fibers, depending on the installed adapters.)
• 3 input/output ports
• Cassette for 24 splices
• Space for mounting 12 SC simplex adapters
• Wall mounting
• Lock with key
• Cassette for 24 splices
• Space for mounting 12 SC simplex adapters
• Wall mounting
• Lock with key
The GXF6-15N5S distribution box is used for termination of fiber optic cabling with a total of 36 fibers.
• Wall-mounted distribution box
• Space for 36 SC simplex/LC duplex adapters
• Space for 36 splices
• Easy handling of excess fiber
• 3 input ports
• Space for splitters
• Lockable with a padlock (not included)
• Easy to install, operate and maintain
• Space for 36 SC simplex/LC duplex adapters
• Space for 36 splices
• Easy handling of excess fiber
• 3 input ports
• Space for splitters
• Lockable with a padlock (not included)
• Easy to install, operate and maintain
The ULTIMODE TB-04B wall switch allows for the management of up to 4 optical fibres.
• Wall switch, indoor (IP65)
• Space for 2 SC simplex/LC duplex adapters
• Space for 4 fibre optic splices
• Slot for mini optical splitter
• Key lock
• 2 inlet and outlet ports (chokes)
• Space for 2 SC simplex/LC duplex adapters
• Space for 4 fibre optic splices
• Slot for mini optical splitter
• Key lock
• 2 inlet and outlet ports (chokes)
The P-PSP-G19-1U-6-SC optical fiber distribution frame with a side shelf combines the features of two elements for installation of devices and fiber optic cabling termination in a RACK cabinet.
• Adjustable front-rear supports
• The ODF supports various adapters and pigtails
• Support for up to 6 SC simplex/LC duplex adapters and up to 12 splices
• Possibility to place a network switch
• Integrated grounding pin
• The ODF supports various adapters and pigtails
• Support for up to 6 SC simplex/LC duplex adapters and up to 12 splices
• Possibility to place a network switch
• Integrated grounding pin
The GFM-12 cabinet allows the management of 12 optical fibres.
• Powder coated, corrosion resistant
• Can be mounted on poles and flat surfaces
• 4 slots (ø max. 24 mm) for trunk and distribution cables
• 12 ports for SC simplex or LC duplex fibre optic adaptors
• Tray for 12 splices (24 in case of stacking)
• Can be mounted on poles and flat surfaces
• 4 slots (ø max. 24 mm) for trunk and distribution cables
• 12 ports for SC simplex or LC duplex fibre optic adaptors
• Tray for 12 splices (24 in case of stacking)
The GFM-24 cabinet allows the management of 24 optical fibres.
• Powder coated, corrosion resistant
• Can be mounted on poles and flat surfaces
• 6 slots for trunk and distribution cables
• 24 ports for SC simplex or LC duplex fibre optic adapters
• Tray for 24 splices (stacking)
• Can be mounted on poles and flat surfaces
• 6 slots for trunk and distribution cables
• 24 ports for SC simplex or LC duplex fibre optic adapters
• Tray for 24 splices (stacking)
The GFM-48 cabinet allows the management of 48 optical fibres.
• Powder coated, corrosion resistant
• Can be mounted on poles and flat surfaces
• 5 slots for trunk and distribution cables
• 48 ports for SC simplex or LC duplex fibre optic adapters
• 2 trays for 24 splices (stacking)
• Can be mounted on poles and flat surfaces
• 5 slots for trunk and distribution cables
• 48 ports for SC simplex or LC duplex fibre optic adapters
• 2 trays for 24 splices (stacking)
The GFM-96 cabinet allows the management of 96 optical fibres.
• Powder coated, corrosion resistant
• Can be mounted on poles and flat surfaces
• 5 slots for trunk and distribution cables
• 96 ports for SC simplex or LC duplex fibre optic adapters
• 4 trays for 24 splices (stacking)
• Can be mounted on poles and flat surfaces
• 5 slots for trunk and distribution cables
• 96 ports for SC simplex or LC duplex fibre optic adapters
• 4 trays for 24 splices (stacking)
The GFM-144 cabinet allows 144 optical fibres to be managed.
• Powder coated, corrosion resistant
• Can be mounted on poles and flat surfaces
• 3 slots for trunk and distribution cables
• 144 ports for SC simplex or LC duplex fibre optic adapters
• 12 splice trays for 12 splices
• Can be mounted on poles and flat surfaces
• 3 slots for trunk and distribution cables
• 144 ports for SC simplex or LC duplex fibre optic adapters
• 12 splice trays for 12 splices
The ULTIMODE TB-48B distribution box allows for the management of 48 optical fibres.
• For connecting up to 48 SC/FC or 96 LC connectors
• Two trays accommodating 48 fusion splices or 32 mechanical splices (ULTIMODE FAST-MS1 L5550)
• Place for two optical splitters
• Key lockable door
• Ease of installation, operation and maintenance
• Two trays accommodating 48 fusion splices or 32 mechanical splices (ULTIMODE FAST-MS1 L5550)
• Place for two optical splitters
• Key lockable door
• Ease of installation, operation and maintenance
The adapter plug is used to close unused openings in the front panels of fibre optic switchers.
• SC simplex plug
• Colour: grey or black
• Colour: grey or black
The adapter plug is used to close unused openings in the front panels of fibre optic switchers.
• SC duplex cap
• Colour: grey or black
• Colour: grey or black
FRP(ARP) rod fixing pin for fibre optic cables in ODF and distribution cabinets.
• Designed for installation in OPTISteel distribution frames
• Additional protection against the cable slipping out of the frame
• Mounting by means of a M4 screw
• Additional protection against the cable slipping out of the frame
• Mounting by means of a M4 screw
A 23 mm hole plug for OptiSteel diverters. It closes off unused switch holes to protect the interior from dust and rodents.
• Designed for OPTISteel distribution frames
• For 23 mm diameter holes
• Made of plastic
• For 23 mm diameter holes
• Made of plastic
The ULTIMODE P-6 splice tray provides protection for fibre splices and proper fibre alignment. It is mainly designed for ULTIMODE MT panels.
• Space for 24 thermal splices
• Large dimensions ensure comfortable fibre routing
• Designed for ULTIMODE MT-548 switchgear
• Large dimensions ensure comfortable fibre routing
• Designed for ULTIMODE MT-548 switchgear
Splice tray to protect fibres and splices for 12 / 24 connections.
• 12/24 splices protection
• 2 baskets of 6 seats
• Protection cover
• Cascadable
• 2 baskets of 6 seats
• Protection cover
• Cascadable
Splice tray to protect fibres and splices for 12 / 24 connections.
• 12/24 splices protection
• 2 flexible holders for 6 places each
• Security cover
• Cascadable
• 2 flexible holders for 6 places each
• Security cover
• Cascadable
Splice tray for fibre and splice protection for 12 / 24 connections. Great possibilities in fibre supply management.
• 12/24 splice protection
• 2 baskets of 6 places
• Convenience and great possibilities of laying fibres
• Safety cover (flexible)
• Cascading capability
• 2 baskets of 6 places
• Convenience and great possibilities of laying fibres
• Safety cover (flexible)
• Cascading capability
Front panel designed for mounting in the ULTIMODE MT-524 distribution box.
• Designed for MT-524 panel
• Space for mounting 24 SC simplex / LC duplex adapters
• Space for mounting 24 SC simplex / LC duplex adapters
Front panel designed for mounting in the ULTIMODE MT-548 distribution box.
• Designed for MT-548 panel
• Space for mounting 48 SC simplex / LC duplex adapters
• Space for mounting 48 SC simplex / LC duplex adapters
Front panel designed for mounting in the ULTIMODE MT-524 distribution box.
• Designed for MT-524 panel
• Space for mounting 12 SC duplex adapters
• Space for mounting 12 SC duplex adapters
Front panel designed for mounting in the ULTIMODE MT-524 distribution box.
• Designed for MT-524 panel
• Space for mounting 24 SC duplex adapters
• Space for mounting 24 SC duplex adapters
The Tracom FTTX ODU 3IN-12S fibre optic coupler is a coupler with 3 inlet/outlet ports.
• 3 inlet/outlet ports
• Convenient fibre management
• Can be used as a coupler or switch
• Space for 12 SC simplex/LC duplex adapters
• 2 splice trays (max. 12 splices each)
• Includes a range of useful accessories
• Convenient fibre management
• Can be used as a coupler or switch
• Space for 12 SC simplex/LC duplex adapters
• 2 splice trays (max. 12 splices each)
• Includes a range of useful accessories
The Tracom Tycon Inline h25 fibre optic closure is equipped with 4 inlet/outlet ports. Used to protect the connections of fibre optic cables.
• 4 inlet/outlet ports
• 2 splice cassettes (max. 12 splices each)
• Slim and compact
• 2 splice cassettes (max. 12 splices each)
• Slim and compact
The GPJ09-9401 round joint box can handle 12, 24 or 36 optical splices. It is suitable for various installation scenarios.
• IP 68
• Can be used in overhead systems, with telecommunication conduits etc.
• Compact size
• Space for 36 fiber optic splices
• 3 splice cassettes
• 2 input and 2 output ports
• Sealing material: self-vulcanizing rubber
• Can be used in overhead systems, with telecommunication conduits etc.
• Compact size
• Space for 36 fiber optic splices
• 3 splice cassettes
• 2 input and 2 output ports
• Sealing material: self-vulcanizing rubber
The GFP-12F-T-2 fiber optic coupler allows you to make a fiber optic connection including up to 12 splices. Flat design allows it to be used in locations with limited space.
• IP68 protection class
• Suitable for telecom ducting, underground systems
• Compact size
• Space for 12 fiber optic splices
• Suitable for telecom ducting, underground systems
• Compact size
• Space for 12 fiber optic splices
Horizontal straight-through joint repair joint. It is designed for 2 cables with an outer diameter not exceeding 6.5 mm.
• Material: PC+ABS
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 4 splices
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 4 splices
GFP-6P fiber optic coupler can be used in ground systems as a repair element or coupler for DAC cables with a maximum of 12 fibers.
• Material: PC+ABS
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 6/12 splices
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 6/12 splices
The GFP-8E pole-mounted coupler has two main cable ports and 8 (+1) subscriber DROP cable ports.
• BOX type housing
• 3 ports for trunk cables
• 8 (+1) ports for subscriber cables
• Cassette for 12 splices
• Space for mounting 4 SC simplex/LC duplex adapters
• 3 ports for trunk cables
• 8 (+1) ports for subscriber cables
• Cassette for 12 splices
• Space for mounting 4 SC simplex/LC duplex adapters
The GFP-8B wall-mounted coupler has 2 inputs for trunk cables and 12 outputs for subscriber cables. It has been designed for wall mounting. The design of the coupler allows the installation of 12 SC simplex/LC duplex and fibre optic splices (12/24).
• The distribution frame is designed for wall and pole mounting
• Space for 12 SC simplex / LC duplex adapters
• Space for 12/24 splices
• Convenient spare fiber management
• 2 input ports
• 12 output ports
• Space for 12 SC simplex / LC duplex adapters
• Space for 12/24 splices
• Convenient spare fiber management
• 2 input ports
• 12 output ports
The MDU B16 pole-mounted joint box has two main cable ports and 16 DROP subscriber cable ports.
• BOX type housing
• 2 trunk cable ports (uncut port)
• 16 subscriber cable ports
• Cassette for 24 splices
• Room for mounting 16 SC simplex adapters
• Can be mounted on a pole
• 2 trunk cable ports (uncut port)
• 16 subscriber cable ports
• Cassette for 24 splices
• Room for mounting 16 SC simplex adapters
• Can be mounted on a pole
The GFP-16D hanged distribution frame has two inputs for trunk cables and 16 outputs for subscriber cables. It is designed for wall or pole mounting.
• The distribution frame is designed for wall and pole mounting
• Space for 16 SC simplex/LC duplex adapters
• Space for 116 splices
• Convenient spare fiber management
• 2 input uncut ports
• 16 subscriber outputs
• Space for 16 SC simplex/LC duplex adapters
• Space for 116 splices
• Convenient spare fiber management
• 2 input uncut ports
• 16 subscriber outputs
The GFP-16G hanged distribution frame has two inputs for trunk cables and 16 outputs for subscriber cables. It is designed for wall or pole mounting.
• The distribution frame is designed for wall and pole mounting
• Space for 16 SC simplex/LC duplex adapters
• Space for 116 splices
• Convenient spare fiber management
• 2 input uncut ports
• 16 subscriber outputs
• Space for 16 SC simplex/LC duplex adapters
• Space for 116 splices
• Convenient spare fiber management
• 2 input uncut ports
• 16 subscriber outputs
The GF-KSW-8A distribution frame can be used on the last mile of FTTH systems. It can terminate up to 12 splices and supports up to 9 subscriber cable outputs.
• Wall- or pole/mast-mounted distribution frame
• Space for 1/4 or 1/8 cassette type splitter
• Space for 12 splices
• Easy handling of excess fiber
• 2 input, 9 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
• Space for 1/4 or 1/8 cassette type splitter
• Space for 12 splices
• Easy handling of excess fiber
• 2 input, 9 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
The GF-KSW-16A distribution frame can be used on the last mile of FTTH systems. It can terminate up to 24 splices and supports up to 18 subscriber cable outputs.
• Wall- or pole/mast-mounted distribution frame
• Space for 1/4, 1/8 or 1/16 cassette type splitter
• Space for 24 splices
• Easy handling of excess fiber
• 3 input, 18 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
• Space for 1/4, 1/8 or 1/16 cassette type splitter
• Space for 24 splices
• Easy handling of excess fiber
• 3 input, 18 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
Optical splitter The TOS 02D 2-output optical splitter is a device with which a fibre optic signal can be divided into 2 optical paths.
• Splits optical line into two paths
• Easy installation in standard cabinets / installation boxes
• FC/PC sockets
• When needed - can be replaced by a 3-out or 4-out splitter
• Easy installation in standard cabinets / installation boxes
• FC/PC sockets
• When needed - can be replaced by a 3-out or 4-out splitter
The TOS 03D optical splitter allows splitting the optical signal into 3 paths. The BOX type housing allows installation in any cabinet.
• Signal splitting into 3 tracks
• FC/PC sockets
• BOX type housing
• Attenuation 5.5 dB
• FC/PC sockets
• BOX type housing
• Attenuation 5.5 dB
The TOS 04F 4-output optical splitter is a device with which a fibre optic signal can be divided into 4 optical paths.
• Signal splitting into 4 tracks
• FC/PC sockets
• BOX type housing
• Attenuation 7 dB
• FC/PC sockets
• BOX type housing
• Attenuation 7 dB
The TOS 08F optical splitter splits optical signal into eight optical paths.
![Cable Tie with ID Tag: GTK-110M [100 pcs.]](https://www.dipolnet.cz/img/thumbnails/e950611+.jpg/0e591a579476a115e15dc246cd2b57d4.jpg)
The cable tie can be used to make cable harnesses or to mark wires for easier identification.
• Color: white
• Length: 110 mm
• Width: 2.5 mm
• Plate size 10x20 mm
• Material: polyamide 6.6
• Length: 110 mm
• Width: 2.5 mm
• Plate size 10x20 mm
• Material: polyamide 6.6
![Cable Tie: TZ10/3Ns (white) [100 pcs.]](https://www.dipolnet.cz/img/thumbnails/e951032+.jpg/f8707e16d788fac6c5f129af11c65ec1.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• High tenacity strength: 114 kg
• Wide temperature range: -40°C to +85°C
• Self-extinguishing material: flame class UL94 V0 or V2
• Wide temperature range: -40°C to +85°C
• Self-extinguishing material: flame class UL94 V0 or V2
![Cable Ties GTK-100M (100x2.5 mm, yellow) [100 pcs.]](https://www.dipolnet.cz/img/thumbnails/e951042+.jpg/bc5982c4da2fa80c811f030a5adf30b6.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• Colour: yellow
• The band is used to mark the wires
• Self-extinguishing with flammability classification to UL 94 V2
• The band is used to mark the wires
• Self-extinguishing with flammability classification to UL 94 V2
![Cable Ties GTK-100M (100x2.5 mm, red) [100 pcs.]](https://www.dipolnet.cz/img/thumbnails/e951043+.jpg/dca8c9efbb23d8864840fcbe2eb73728.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• Colour: red
• The band is used to mark the wires
• Self-extinguishing with flammability rating to UL 94 V2
• The band is used to mark the wires
• Self-extinguishing with flammability rating to UL 94 V2
![Cable Ties GTK-100M (100x2.5 mm, green) [100 pcs.]](https://www.dipolnet.cz/img/thumbnails/e951044+.jpg/7c81e5085d5cadac9a6841ada2c6c6c6.jpg)
The E951044 cable ties can be used for binding cables into bundles or marking cables for easier identification.
• Colour: green
• The band is used to mark the wires
• Self-extinguishing with flammability classification to UL 94 V2
• The band is used to mark the wires
• Self-extinguishing with flammability classification to UL 94 V2
![Cable Ties GTK-100M (100x2.5 mm, black) [100 pcs.]](https://www.dipolnet.cz/img/thumbnails/e951045+.jpg/33698c51b5ef93eccc1dbbb134ddcde8.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• Colour: black
• The band is used to mark the wires
• Self-extinguishing with flammability rating to UL 94 V2
• The band is used to mark the wires
• Self-extinguishing with flammability rating to UL 94 V2
![Cable Tie TZ20/3Ns (white) [100 pcs.]](https://www.dipolnet.com/img/thumbnails/e952032+.jpg/84bcf076d594208ae4644b2841fde606.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• High mechanical breaking strength
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
![Cable Tie TZ20/5Cs (black) [100pcs]](https://www.dipolnet.com/img/thumbnails/e952054+.jpg/d7f6e2913d6d977a447170465d10e621.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• High mechanical breaking strength
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
![Cable Tie TZ37/5Cs (black) [100pcs]](https://www.dipolnet.cz/img/thumbnails/e953754+.jpg/b5cb08a912d705bd286794ec561aee34.jpg)
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• High mechanical breaking strength
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
Optical Splitter P-SC-PLC.1-02 allows splitting the optical power transmitted in a fiber optic path into 2 equivalent paths.
• Power splitting 1x2
• Operation in the whole band range 1260-1650 nm
• G.657A fiber optics of 1 m length ended with SC/APC connectors
• Small dimensions
• Stable operation
• Operation in the whole band range 1260-1650 nm
• G.657A fiber optics of 1 m length ended with SC/APC connectors
• Small dimensions
• Stable operation
The 1x2 WDM coupler allows for the summing (multiplexing) or splitting (demultiplexing) of signals in a fibre optic system.
• Coupler 1x2
• Wavelengths: 1310 and 1550 nm
• G657A fibres, 1 m
• Wavelengths: 1310 and 1550 nm
• G657A fibres, 1 m
Optical attenuator (SC female to SC male) with 2 dB insertion loss, coopering with single-mode optical fibers.
• SC female to SC male optical attenuator
• Insertion loss: 2 dB
• For single-mode equipment
• Ability to work above 1300 nm
• Metal casing
• Insertion loss: 2 dB
• For single-mode equipment
• Ability to work above 1300 nm
• Metal casing
Optical attenuator (SC female to SC male) with 5 dB insertion loss, coopering with single-mode optical fibers.
• Attenuation: 5 dB
• Designed for SC connectors (SC female to SC male)
• For single-mode equipment
• Ability to work over 1300 nm
• Metal casing
• Designed for SC connectors (SC female to SC male)
• For single-mode equipment
• Ability to work over 1300 nm
• Metal casing
Optical attenuator with 5 dB attenuation, used to match optical levels to the dynamic range of the optical receiver input.
• 5 dB attenuator
• FC/UPC plug - FC/UPC socket
• Single-mode networks
• Wavelength > 1300 nm
• Metal housing
• FC/UPC plug - FC/UPC socket
• Single-mode networks
• Wavelength > 1300 nm
• Metal housing
Optical attenuator with 10 dB attenuation, used to match optical levels to the dynamic range of the optical receiver input.
• 10 dB attenuator
• FC/UPC plug - FC/UPC socket
• Single-mode networks
• Wavelength > 1300 nm
• Metal housing
• FC/UPC plug - FC/UPC socket
• Single-mode networks
• Wavelength > 1300 nm
• Metal housing
The Terra so414 1x4 optical splitter is a component used to split the optical signal coming from an optical transmitter into 4 poses.
• Compatible with single-mode fibre optics
• Range of wavelengths supported: 1260-1650 nm
• Several mounting options (DIN rail, façade)
• Optical connectors - SC/APC
• Stability of attenuation
• High reliability
• Range of wavelengths supported: 1260-1650 nm
• Several mounting options (DIN rail, façade)
• Optical connectors - SC/APC
• Stability of attenuation
• High reliability
