Optical attenuator (SC female to SC male) with 2 dB insertion loss, coopering with single-mode optical fibers...
• SC female to SC male optical attenuator
• Insertion loss: 2 dB
• For single-mode equipment
• Ability to work above 1300 nm
• Metal casing
• Insertion loss: 2 dB
• For single-mode equipment
• Ability to work above 1300 nm
• Metal casing
Optical attenuator (SC female to SC male) with 5 dB insertion loss, coopering with single-mode optical fibers...
• Attenuation: 5 dB
• Designed for SC connectors (SC female to SC male)
• For single-mode equipment
• Ability to work over 1300 nm
• Metal casing
• Designed for SC connectors (SC female to SC male)
• For single-mode equipment
• Ability to work over 1300 nm
• Metal casing
Optical attenuator with 5 dB attenuation, used to match optical levels to the dynamic range of the optical receiver input.
• 5 dB attenuator
• FC/UPC plug - FC/UPC socket
• Single-mode networks
• Wavelength > 1300 nm
• Metal housing
• FC/UPC plug - FC/UPC socket
• Single-mode networks
• Wavelength > 1300 nm
• Metal housing
Optical attenuator with 10 dB attenuation, used to match optical levels to the dynamic range of the optical receiver input.
• 10 dB attenuator
• FC/UPC plug - FC/UPC socket
• Single-mode networks
• Wavelength > 1300 nm
• Metal housing
• FC/UPC plug - FC/UPC socket
• Single-mode networks
• Wavelength > 1300 nm
• Metal housing
FOS 102 E optical splitter is an element used to divide the optical signal into 2 paths.
• Dividing the signal into 2 paths
• FC/PC sockets
• Box type housing
• Attenuation of 3.9 dB
• FC/PC sockets
• Box type housing
• Attenuation of 3.9 dB
FOS 104 E optical splitter is an element used to divide the optical signal into 4 paths.
• Dividing the signal into 4 paths
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
FOS 108 E optical splitter is an element used to divide the optical signal into 8 paths.
• Dividing the signal into 8 paths
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
The TOS 02D optical splitter splits optical signal from optical output LNB A9885 or the optical transmitter of the A9880 set into two optical paths. The splitter can be also used in any PON networks.
• Splits optical line into two paths
• Easy installation in standard cabinets / installation boxes
• FC/PC sockets
• When needed - can be replaced by a 3-out or 4-out splitter
• Easy installation in standard cabinets / installation boxes
• FC/PC sockets
• When needed - can be replaced by a 3-out or 4-out splitter
Opto-Spt3 BOX optical splitter splits optical signal from optical output LNB A9885 or the optical transmitter of the A9880 set into three optical paths. The splitter can be also used in any PON networks.