FOS 102 E optical splitter is an element used to divide the optical signal into 2 paths.
• Dividing the signal into 2 paths
• FC/PC sockets
• Box type housing
• Attenuation of 3.9 dB
• FC/PC sockets
• Box type housing
• Attenuation of 3.9 dB
FOS 104 E optical splitter is an element used to divide the optical signal into 4 paths.
• Dividing the signal into 4 paths
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
FOS 108 E optical splitter is an element used to divide the optical signal into 8 paths.
• Dividing the signal into 8 paths
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
The TOS 02D optical splitter splits optical signal from optical output LNB A9885 or the optical transmitter of the A9880 set into two optical paths. The splitter can be also used in any PON networks.
• Splits optical line into two paths
• Easy installation in standard cabinets / installation boxes
• FC/PC sockets
• When needed - can be replaced by a 3-out or 4-out splitter
• Easy installation in standard cabinets / installation boxes
• FC/PC sockets
• When needed - can be replaced by a 3-out or 4-out splitter
Opto-Spt3 BOX optical splitter splits optical signal from optical output LNB A9885 or the optical transmitter of the A9880 set into three optical paths. The splitter can be also used in any PON networks.
The TOS 04F optical splitter splits optical signal into four optical paths.
The TOS 08F optical splitter splits optical signal into eight optical paths.
Optical Splitter P-SC-PLC.1-02 allows splitting the optical power transmitted in a fiber optic path into 2 equivalent paths.
• Power splitting 1x2
• Operation in the whole band range 1260-1650 nm
• G.657A fiber optics of 1 m length ended with SC/APC connectors
• Small dimensions
• Stable operation
• Operation in the whole band range 1260-1650 nm
• G.657A fiber optics of 1 m length ended with SC/APC connectors
• Small dimensions
• Stable operation
The 1x2 WDM coupler allows for the summing (multiplexing) or splitting (demultiplexing) of signals in a fibre optic system.
• Coupler 1x2
• Wavelengths: 1310 and 1550 nm
• G657A fibres, 1 m
• Wavelengths: 1310 and 1550 nm
• G657A fibres, 1 m
The Terra so414 optical splitter splits optical signal from the output of an optical transmitter into four optical paths. The splitter can be used in any PONs (Passive Optical Networks).
