EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The MDU B16 pole-mounted joint box has two main cable ports and 16 DROP subscriber cable ports.
• BOX type housing
• 2 trunk cable ports (uncut port)
• 16 subscriber cable ports
• Cassette for 24 splices
• Room for mounting 16 SC simplex adapters
• Can be mounted on a pole
• 2 trunk cable ports (uncut port)
• 16 subscriber cable ports
• Cassette for 24 splices
• Room for mounting 16 SC simplex adapters
• Can be mounted on a pole
The GFP-16D hanged distribution frame has two inputs for trunk cables and 16 outputs for subscriber cables. It is designed for wall or pole mounting.
• The distribution frame is designed for wall and pole mounting
• Space for 16 SC simplex/LC duplex adapters
• Space for 116 splices
• Convenient spare fiber management
• 2 input uncut ports
• 16 subscriber outputs
• Space for 16 SC simplex/LC duplex adapters
• Space for 116 splices
• Convenient spare fiber management
• 2 input uncut ports
• 16 subscriber outputs
The GFP-16G hanged distribution frame has two inputs for trunk cables and 16 outputs for subscriber cables. It is designed for wall or pole mounting.
• The distribution frame is designed for wall and pole mounting
• Space for 16 SC simplex/LC duplex adapters
• Space for 116 splices
• Convenient spare fiber management
• 2 input uncut ports
• 16 subscriber outputs
• Space for 16 SC simplex/LC duplex adapters
• Space for 116 splices
• Convenient spare fiber management
• 2 input uncut ports
• 16 subscriber outputs
The GF-KSW-8A distribution frame can be used on the last mile of FTTH systems. It can terminate up to 12 splices and supports up to 9 subscriber cable outputs.
• Wall- or pole/mast-mounted distribution frame
• Space for 1/4 or 1/8 cassette type splitter
• Space for 12 splices
• Easy handling of excess fiber
• 2 input, 9 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
• Space for 1/4 or 1/8 cassette type splitter
• Space for 12 splices
• Easy handling of excess fiber
• 2 input, 9 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
The GF-KSW-16A distribution frame can be used on the last mile of FTTH systems. It can terminate up to 24 splices and supports up to 18 subscriber cable outputs.
• Wall- or pole/mast-mounted distribution frame
• Space for 1/4, 1/8 or 1/16 cassette type splitter
• Space for 24 splices
• Easy handling of excess fiber
• 3 input, 18 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
• Space for 1/4, 1/8 or 1/16 cassette type splitter
• Space for 24 splices
• Easy handling of excess fiber
• 3 input, 18 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
The GXF6-15N5S distribution box is used for termination of fiber optic cabling with a total of 36 fibers.
• Wall-mounted distribution box
• Space for 36 SC simplex/LC duplex adapters
• Space for 36 splices
• Easy handling of excess fiber
• 3 input ports
• Space for splitters
• Lockable with a padlock (not included)
• Easy to install, operate and maintain
• Space for 36 SC simplex/LC duplex adapters
• Space for 36 splices
• Easy handling of excess fiber
• 3 input ports
• Space for splitters
• Lockable with a padlock (not included)
• Easy to install, operate and maintain
The GFM-12 cabinet allows the management of 12 optical fibres.
• Powder coated, corrosion resistant
• Can be mounted on poles and flat surfaces
• 4 slots (ø max. 24 mm) for trunk and distribution cables
• 12 ports for SC simplex or LC duplex fibre optic adaptors
• Tray for 12 splices (24 in case of stacking)
• Can be mounted on poles and flat surfaces
• 4 slots (ø max. 24 mm) for trunk and distribution cables
• 12 ports for SC simplex or LC duplex fibre optic adaptors
• Tray for 12 splices (24 in case of stacking)
The GFM-24 cabinet allows the management of 24 optical fibres.
• Powder coated, corrosion resistant
• Can be mounted on poles and flat surfaces
• 6 slots for trunk and distribution cables
• 24 ports for SC simplex or LC duplex fibre optic adapters
• Tray for 24 splices (stacking)
• Can be mounted on poles and flat surfaces
• 6 slots for trunk and distribution cables
• 24 ports for SC simplex or LC duplex fibre optic adapters
• Tray for 24 splices (stacking)
The GFM-48 cabinet allows the management of 48 optical fibres.
• Powder coated, corrosion resistant
• Can be mounted on poles and flat surfaces
• 5 slots for trunk and distribution cables
• 48 ports for SC simplex or LC duplex fibre optic adapters
• 2 trays for 24 splices (stacking)
• Can be mounted on poles and flat surfaces
• 5 slots for trunk and distribution cables
• 48 ports for SC simplex or LC duplex fibre optic adapters
• 2 trays for 24 splices (stacking)
The GFM-96 cabinet allows the management of 96 optical fibres.
• Powder coated, corrosion resistant
• Can be mounted on poles and flat surfaces
• 5 slots for trunk and distribution cables
• 96 ports for SC simplex or LC duplex fibre optic adapters
• 4 trays for 24 splices (stacking)
• Can be mounted on poles and flat surfaces
• 5 slots for trunk and distribution cables
• 96 ports for SC simplex or LC duplex fibre optic adapters
• 4 trays for 24 splices (stacking)
