EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The ULTIMODE MT-524 pull-out panel is designed for use in optical fibre networks as a distribution point and connection point.
• Panel for 19'' rack
• Size 1U
• Telescopic slides
• Large tray for 24 splices
• Front plates can be purchased for various types of adapters
• Wide cable entry hole
• Large guides for tube/fibre supply
• Size 1U
• Telescopic slides
• Large tray for 24 splices
• Front plates can be purchased for various types of adapters
• Wide cable entry hole
• Large guides for tube/fibre supply
OPTISteel 1U 12xSC simplex / LC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 12 or 24 fibre terminations.
• Front panel for 12 SC simplex / LC duplex adapters
• Material: 1 mm thick steel
• Powder coated (black colour)
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 12xSC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows the implementation of 24 fibre optic fibre terminations.
• Front panel for 12 SC duplex adapters
• Material: 1 mm thick steel
• Powder coated (black colour)
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 24xSC simplex / LC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 24 or 48 fibre terminations.
• Front panel for 24 SC simplex / LC duplex adapters
• Material: 1 mm thick steel
• Powder coated (black colour)
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 24xSC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 48 fibre terminations.
• Front panel for 24 SC duplex adapters
• Material: 1 mm thick steel
• Powder coated (black colour)
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 12xSC simplex / LC duplex drop-out fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 12 or 24 fibre terminations.
• Front panel for 12 SC simplex / LC duplex adapters
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 12xSC duplex fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows the implementation of 24 fibre optic fibre terminations.
• Front panel for 12 SC duplex adapters
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
OPTISteel 1U 24xSC simplex / LC duplex drop-out fibre optic distribution frame is designed for installation in 19" rack cabinets and racks. It allows 24 or 48 fibre terminations.
• Front panel for 24 SC simplex / LC duplex adapters
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
The OPTISteel 1U 24xSC duplex fibre optic switch is designed for installation in 19" rack cabinets and racks. It allows 48 fibre terminations.
• Front panel for 24 SC duplex adapters
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
• Can be pulled out after installation in the RACK cabinet
• Material: 1 mm thick steel
• Powder coated (black colour)
The ULTIMODE MT-548 pull-out panel is designed for use in optical fibre networks as a distribution point and connection point.
• Panel for 19'' rack
• 2U size
• Telescopic slides
• Two large cassettes for 48 splices
• Front plates for various types of adapters can be purchased
• Wide opening for cable entry
• Large guides to keep tubes/fibres stocked
• 2U size
• Telescopic slides
• Two large cassettes for 48 splices
• Front plates for various types of adapters can be purchased
• Wide opening for cable entry
• Large guides to keep tubes/fibres stocked
The industrial grade MINI ODF-DIN distribution frame is designed mainly for fiber optic cable crossing in places with limited space.
• 2x SC duplex or 2x LC quad
• Made of 1 mm steel sheet
• Convenient and quick assembly on DIN rail
• Two holes for cables up to 8 mm in diameter
• Powder painting RAL 7035 gloss
• Convenient silicone bracket for splicing caps
• Dimensions: 70x65x33 mm
• Made of 1 mm steel sheet
• Convenient and quick assembly on DIN rail
• Two holes for cables up to 8 mm in diameter
• Powder painting RAL 7035 gloss
• Convenient silicone bracket for splicing caps
• Dimensions: 70x65x33 mm
The PS-m DIN distribution frame is designed mainly for fiber optic cable crossing in places with limited space.
• Made of 1 mm steel sheet
• Convenient and quick assembly on DIN rail
• 2x SC duplex or 2x LC quad
• Three holes for cables up to 10 mm in diameter
• Powder painted grey
• Convenient bracket for splicing caps
• Dimensions: 85x70x33 mm for safe arrangement of optical fibers
• Convenient and quick assembly on DIN rail
• 2x SC duplex or 2x LC quad
• Three holes for cables up to 10 mm in diameter
• Powder painted grey
• Convenient bracket for splicing caps
• Dimensions: 85x70x33 mm for safe arrangement of optical fibers
Optical fibre switch, designed to be mounted on a DIN rail (TH35, TS35, DIN-3), allowing up to 6 SC duplex adapters to be installed.
• DIN rail mounting (TH35)
• Space for 6 SC duplex adapters
• Supports 12 splices
• Colour: grey
• Space for 6 SC duplex adapters
• Supports 12 splices
• Colour: grey
The P-PSP-G19-1U-6-SC optical fiber distribution frame with a side shelf combines the features of two elements for installation of devices and fiber optic cabling termination in a RACK cabinet.
• Adjustable front-rear supports
• The ODF supports various adapters and pigtails
• Support for up to 6 SC simplex/LC duplex adapters and up to 12 splices
• Possibility to place a network switch
• Integrated grounding pin
• The ODF supports various adapters and pigtails
• Support for up to 6 SC simplex/LC duplex adapters and up to 12 splices
• Possibility to place a network switch
• Integrated grounding pin
Front panel designed for mounting in the ULTIMODE MT-524 distribution box.
• Designed for MT-524 panel
• Space for mounting 24 SC simplex / LC duplex adapters
• Space for mounting 24 SC simplex / LC duplex adapters
Front panel designed for mounting in the ULTIMODE MT-548 distribution box.
• Designed for MT-548 panel
• Space for mounting 48 SC simplex / LC duplex adapters
• Space for mounting 48 SC simplex / LC duplex adapters
Front panel designed for mounting in the ULTIMODE MT-524 distribution box.
• Designed for MT-524 panel
• Space for mounting 12 SC duplex adapters
• Space for mounting 12 SC duplex adapters
Front panel designed for mounting in the ULTIMODE MT-524 distribution box.
• Designed for MT-524 panel
• Space for mounting 24 SC duplex adapters
• Space for mounting 24 SC duplex adapters
The GFP-4A wall-mounted distribution frame has one input for the trunk cable and 4 outputs for subscriber cables. It is designed for wall mounting.
• The distribution frame is designed for wall mounting
• Space for 4 SC simplex / LC duplex adapters
• Space for 4 splices
• 1 input port
• 4 output ports
• Space for 4 SC simplex / LC duplex adapters
• Space for 4 splices
• 1 input port
• 4 output ports
The GP62DW-7 wall-mounted distribution frame allows for easy organization of fiber optic cables (up to 12 fibers, depending on the installed adapters.)
• Wall-mounted distribution frame
• Space for mounting 4 SC simplex/LC duplex adapters
• Space for 12 splices
• Easy handling of excess fiber
• 1 input port
• 4/8 output ports
• Cover with latches with additional locking screw
• Easy to install, operate and maintain
• Space for mounting 4 SC simplex/LC duplex adapters
• Space for 12 splices
• Easy handling of excess fiber
• 1 input port
• 4/8 output ports
• Cover with latches with additional locking screw
• Easy to install, operate and maintain
The GP62DW-1 wall-mounted distribution frame allows for easy organization of fiber optic cables (up to 16 fibers, depending on the installed adapters.)
• 3 input/output ports
• Cassette for 16 splices
• Space for mounting 8 SC simplex adapters
• Wall mounting
• Cassette for 16 splices
• Space for mounting 8 SC simplex adapters
• Wall mounting
The GP62DW-3 wall-mounted distribution frame allows for easy organization of fiber optic cables (up to 24 fibers, depending on the installed adapters.)
• 3 input/output ports
• Cassette for 24 splices
• Space for mounting 12 SC simplex adapters
• Wall mounting
• Lock with key
• Cassette for 24 splices
• Space for mounting 12 SC simplex adapters
• Wall mounting
• Lock with key
The Tracom FTTX ODU 3IN-12S fibre optic coupler is a coupler with 3 inlet/outlet ports.
• 3 inlet/outlet ports
• Convenient fibre management
• Can be used as a coupler or switch
• Space for 12 SC simplex/LC duplex adapters
• 2 splice trays (max. 12 splices each)
• Includes a range of useful accessories
• Convenient fibre management
• Can be used as a coupler or switch
• Space for 12 SC simplex/LC duplex adapters
• 2 splice trays (max. 12 splices each)
• Includes a range of useful accessories
The Tracom Tycon Inline h25 fibre optic closure is equipped with 4 inlet/outlet ports. Used to protect the connections of fibre optic cables.
• 4 inlet/outlet ports
• 2 splice cassettes (max. 12 splices each)
• Slim and compact
• 2 splice cassettes (max. 12 splices each)
• Slim and compact
The GPJ09-9401 round joint box can handle 12, 24 or 36 optical splices. It is suitable for various installation scenarios.
• IP 68
• Can be used in overhead systems, with telecommunication conduits etc.
• Compact size
• Space for 36 fiber optic splices
• 3 splice cassettes
• 2 input and 2 output ports
• Sealing material: self-vulcanizing rubber
• Can be used in overhead systems, with telecommunication conduits etc.
• Compact size
• Space for 36 fiber optic splices
• 3 splice cassettes
• 2 input and 2 output ports
• Sealing material: self-vulcanizing rubber
The GFP-12F-T-2 fiber optic coupler allows you to make a fiber optic connection including up to 12 splices. Flat design allows it to be used in locations with limited space.
• IP68 protection class
• Suitable for telecom ducting, underground systems
• Compact size
• Space for 12 fiber optic splices
• Suitable for telecom ducting, underground systems
• Compact size
• Space for 12 fiber optic splices
Horizontal straight-through joint repair joint. It is designed for 2 cables with an outer diameter not exceeding 6.5 mm.
• Material: PC+ABS
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 4 splices
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 4 splices
GFP-6P fiber optic coupler can be used in ground systems as a repair element or coupler for DAC cables with a maximum of 12 fibers.
• Material: PC+ABS
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 6/12 splices
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 6/12 splices
The GFP-8E pole-mounted coupler has two main cable ports and 8 (+1) subscriber DROP cable ports.
• BOX type housing
• 3 ports for trunk cables
• 8 (+1) ports for subscriber cables
• Cassette for 12 splices
• Space for mounting 4 SC simplex/LC duplex adapters
• 3 ports for trunk cables
• 8 (+1) ports for subscriber cables
• Cassette for 12 splices
• Space for mounting 4 SC simplex/LC duplex adapters
The GFP-8B wall-mounted coupler has 2 inputs for trunk cables and 12 outputs for subscriber cables. It has been designed for wall mounting. The design of the coupler allows the installation of 12 SC simplex/LC duplex and fibre optic splices (12/24).
• The distribution frame is designed for wall and pole mounting
• Space for 12 SC simplex / LC duplex adapters
• Space for 12/24 splices
• Convenient spare fiber management
• 2 input ports
• 12 output ports
• Space for 12 SC simplex / LC duplex adapters
• Space for 12/24 splices
• Convenient spare fiber management
• 2 input ports
• 12 output ports
The MDU B16 pole-mounted joint box has two main cable ports and 16 DROP subscriber cable ports.
• BOX type housing
• 2 trunk cable ports (uncut port)
• 16 subscriber cable ports
• Cassette for 24 splices
• Room for mounting 16 SC simplex adapters
• Can be mounted on a pole
• 2 trunk cable ports (uncut port)
• 16 subscriber cable ports
• Cassette for 24 splices
• Room for mounting 16 SC simplex adapters
• Can be mounted on a pole
The GFP-16D hanged distribution frame has two inputs for trunk cables and 16 outputs for subscriber cables. It is designed for wall or pole mounting.
• The distribution frame is designed for wall and pole mounting
• Space for 16 SC simplex/LC duplex adapters
• Space for 116 splices
• Convenient spare fiber management
• 2 input uncut ports
• 16 subscriber outputs
• Space for 16 SC simplex/LC duplex adapters
• Space for 116 splices
• Convenient spare fiber management
• 2 input uncut ports
• 16 subscriber outputs
The GFP-16G hanged distribution frame has two inputs for trunk cables and 16 outputs for subscriber cables. It is designed for wall or pole mounting.
• The distribution frame is designed for wall and pole mounting
• Space for 16 SC simplex/LC duplex adapters
• Space for 116 splices
• Convenient spare fiber management
• 2 input uncut ports
• 16 subscriber outputs
• Space for 16 SC simplex/LC duplex adapters
• Space for 116 splices
• Convenient spare fiber management
• 2 input uncut ports
• 16 subscriber outputs
The GF-KSW-8A distribution frame can be used on the last mile of FTTH systems. It can terminate up to 12 splices and supports up to 9 subscriber cable outputs.
• Wall- or pole/mast-mounted distribution frame
• Space for 1/4 or 1/8 cassette type splitter
• Space for 12 splices
• Easy handling of excess fiber
• 2 input, 9 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
• Space for 1/4 or 1/8 cassette type splitter
• Space for 12 splices
• Easy handling of excess fiber
• 2 input, 9 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
The GF-KSW-16A distribution frame can be used on the last mile of FTTH systems. It can terminate up to 24 splices and supports up to 18 subscriber cable outputs.
• Wall- or pole/mast-mounted distribution frame
• Space for 1/4, 1/8 or 1/16 cassette type splitter
• Space for 24 splices
• Easy handling of excess fiber
• 3 input, 18 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
• Space for 1/4, 1/8 or 1/16 cassette type splitter
• Space for 24 splices
• Easy handling of excess fiber
• 3 input, 18 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
The GXF6-15N5S distribution box is used for termination of fiber optic cabling with a total of 36 fibers.
• Wall-mounted distribution box
• Space for 36 SC simplex/LC duplex adapters
• Space for 36 splices
• Easy handling of excess fiber
• 3 input ports
• Space for splitters
• Lockable with a padlock (not included)
• Easy to install, operate and maintain
• Space for 36 SC simplex/LC duplex adapters
• Space for 36 splices
• Easy handling of excess fiber
• 3 input ports
• Space for splitters
• Lockable with a padlock (not included)
• Easy to install, operate and maintain
The ULTIMODE TB-48B distribution box allows for the management of 48 optical fibres.
• For connecting up to 48 SC/FC or 96 LC connectors
• Two trays accommodating 48 fusion splices or 32 mechanical splices (ULTIMODE FAST-MS1 L5550)
• Place for two optical splitters
• Key lockable door
• Ease of installation, operation and maintenance
• Two trays accommodating 48 fusion splices or 32 mechanical splices (ULTIMODE FAST-MS1 L5550)
• Place for two optical splitters
• Key lockable door
• Ease of installation, operation and maintenance
ULTIMODE TB-02H cable junction box allows to terminate a subscriber's optical fibre line. It can terminate max. 4 fibers.
• Optical fiber termination box for indoor applications
• For connecting up to 4 LC or 2 SC/FC connectors
• Possibility of securing mechanical splice ULTIMODE MS-1 L5550
• Ease of installation, operation and maintenance
• For connecting up to 4 LC or 2 SC/FC connectors
• Possibility of securing mechanical splice ULTIMODE MS-1 L5550
• Ease of installation, operation and maintenance
ULTIMODE TB-02H-1 cable junction box allows to terminate a subscriber's optical fibre line. It can terminate max. 4 fibers.
• Small in size
• Space for 2 SC simples/LC duplex adapters
• Removable front cover
• Space for 2 SC simples/LC duplex adapters
• Removable front cover
Subscriber outlet designed for wall mounting. Used in FTTH networks for terminating subscriber lines. Low depth and modern design.
• Compact size
• Space for 2 SC simples/LC duplex adapters (no flange)
• DAC input and 7mm microtube (outer diameter)
• Clips for DAC and microtube clamps
• Intuitive fiber organization
• Divided into 2 zones: switching and splicing section
• Space for 2 SC simples/LC duplex adapters (no flange)
• DAC input and 7mm microtube (outer diameter)
• Clips for DAC and microtube clamps
• Intuitive fiber organization
• Divided into 2 zones: switching and splicing section
ULTIMODE TB-04H cable junction box enables termination of a subscriber's fibre optic line. It can terminate up to 8 fibers.
• Space for 4 SC simplex/LC duplex adapters
• Capable of securing 4 fibre splices
• Flip-up mounting tray
• Removable front cover
• Capable of securing 4 fibre splices
• Flip-up mounting tray
• Removable front cover
HERMES surface-mounted subscriber outlet, is an element used for connecting fiber optic cable ends in FTTH networks. Ideal solution in places where you have to connect max. 4 users.
• Outdoor and indoor use
• Protection rating IP 54 and IK-10
• Maximum capacity: 4 SC simplex adapters (without flange), 12 splices
• Special place for gas-tight connector for a 7 mm tube
• Inputs with two cables or microtubes 7 and 12 mm
• Possibility to exit with 4 cables along the wall or drill through the wall
• Compact, lightweight design
• Ideal for single-family and low-rise residential buildings (semi-detached houses, tenement houses)
• Material resistant to UV rays – polycarbonate color RAL 7035
• Included set of screws and mounting studs
• Protection rating IP 54 and IK-10
• Maximum capacity: 4 SC simplex adapters (without flange), 12 splices
• Special place for gas-tight connector for a 7 mm tube
• Inputs with two cables or microtubes 7 and 12 mm
• Possibility to exit with 4 cables along the wall or drill through the wall
• Compact, lightweight design
• Ideal for single-family and low-rise residential buildings (semi-detached houses, tenement houses)
• Material resistant to UV rays – polycarbonate color RAL 7035
• Included set of screws and mounting studs
SHARK micro bracket is a type of steel structure used for mounting the HERMES subscriber outlet. It is ideal for securing the access cable supply in the distribution segment.
• Designed for HERMES outlet
• Mounting on a pole
• Max. 20 m of cable reserve (6 mm diameter)
• Mounting on a pole
• Max. 20 m of cable reserve (6 mm diameter)
The FTTH-DIN junction box is designed for indoor use. It enables fiber optic cable termination from 1 to 4 fibers.
• Modern and innovative design
• High quality material
• Possibility to install SC simplex or LC duplex adapters
• Cable inputs: 1 x diameter max. 12 mm
• High quality material
• Possibility to install SC simplex or LC duplex adapters
• Cable inputs: 1 x diameter max. 12 mm
The ULTIMODE TB-04B wall switch allows for the management of up to 4 optical fibres.
• Wall switch, indoor (IP65)
• Space for 2 SC simplex/LC duplex adapters
• Space for 4 fibre optic splices
• Slot for mini optical splitter
• Key lock
• 2 inlet and outlet ports (chokes)
• Space for 2 SC simplex/LC duplex adapters
• Space for 4 fibre optic splices
• Slot for mini optical splitter
• Key lock
• 2 inlet and outlet ports (chokes)
The adapter is designed for mounting in the ALU 500 and ALU 600 racks. It is used for mounting the B16 joint box.
• Material: aluminum
• Spacing of the joint box screw holes: 158 mm x 82 mm
• Spacing of the joint box screw holes: 158 mm x 82 mm
The adapter is designed for mounting in the ALU 500 and ALU 600 racks. It is used for mounting the GFP-8E joint box.
• Material: aluminum
The adapter plug is used to close unused openings in the front panels of fibre optic switchers.
• SC simplex plug
• Colour: grey or black
• Colour: grey or black
The adapter plug is used to close unused openings in the front panels of fibre optic switchers.
• SC duplex cap
• Colour: grey or black
• Colour: grey or black
FRP(ARP) rod fixing pin for fibre optic cables in ODF and distribution cabinets.
• Designed for installation in OPTISteel distribution frames
• Additional protection against the cable slipping out of the frame
• Mounting by means of a M4 screw
• Additional protection against the cable slipping out of the frame
• Mounting by means of a M4 screw
A 23 mm hole plug for OptiSteel diverters. It closes off unused switch holes to protect the interior from dust and rodents.
• Designed for OPTISteel distribution frames
• For 23 mm diameter holes
• Made of plastic
• For 23 mm diameter holes
• Made of plastic
The ULTIMODE P-6 splice tray provides protection for fibre splices and proper fibre alignment. It is mainly designed for ULTIMODE MT panels.
• Space for 24 thermal splices
• Large dimensions ensure comfortable fibre routing
• Designed for ULTIMODE MT-548 switchgear
• Large dimensions ensure comfortable fibre routing
• Designed for ULTIMODE MT-548 switchgear
Splice tray to protect fibres and splices for 12 / 24 connections.
• 12/24 splices protection
• 2 baskets of 6 seats
• Protection cover
• Cascadable
• 2 baskets of 6 seats
• Protection cover
• Cascadable
Splice tray to protect fibres and splices for 12 / 24 connections.
• 12/24 splices protection
• 2 flexible holders for 6 places each
• Security cover
• Cascadable
• 2 flexible holders for 6 places each
• Security cover
• Cascadable
Splice tray for fibre and splice protection for 12 / 24 connections. Great possibilities in fibre supply management.
• 12/24 splice protection
• 2 baskets of 6 places
• Convenience and great possibilities of laying fibres
• Safety cover (flexible)
• Cascading capability
• 2 baskets of 6 places
• Convenience and great possibilities of laying fibres
• Safety cover (flexible)
• Cascading capability
