The GFP-4A wall-mounted distribution frame has one input for the trunk cable and 4 outputs for subscriber cables. It is designed for wall mounting.
• The distribution frame is designed for wall mounting
• Space for 4 SC simplex / LC duplex adapters
• Space for 4 splices
• 1 input port
• 4 output ports
• Space for 4 SC simplex / LC duplex adapters
• Space for 4 splices
• 1 input port
• 4 output ports
The GP62DW-7 wall-mounted distribution frame allows for easy organization of fiber optic cables (up to 12 fibers, depending on the installed adapters.)
• Wall-mounted distribution frame
• Space for mounting 4 SC simplex/LC duplex adapters
• Space for 12 splices
• Easy handling of excess fiber
• 1 input port
• 4/8 output ports
• Cover with latches with additional locking screw
• Easy to install, operate and maintain
• Space for mounting 4 SC simplex/LC duplex adapters
• Space for 12 splices
• Easy handling of excess fiber
• 1 input port
• 4/8 output ports
• Cover with latches with additional locking screw
• Easy to install, operate and maintain
The GP62DW-1 wall-mounted distribution frame allows for easy organization of fiber optic cables (up to 16 fibers, depending on the installed adapters.)
• 3 input/output ports
• Cassette for 16 splices
• Space for mounting 8 SC simplex adapters
• Wall mounting
• Cassette for 16 splices
• Space for mounting 8 SC simplex adapters
• Wall mounting
The GP62DW-3 wall-mounted distribution frame allows for easy organization of fiber optic cables (up to 24 fibers, depending on the installed adapters.)
• 3 input/output ports
• Cassette for 24 splices
• Space for mounting 12 SC simplex adapters
• Wall mounting
• Lock with key
• Cassette for 24 splices
• Space for mounting 12 SC simplex adapters
• Wall mounting
• Lock with key
Tracom FTTX ODU BLACK 3IN-12S is a fiber-optic joint box with 3 points of entry. This type of boxes is used to protect fiber strands and branching nodes. The box has been designed for wall mounting in indoor or outdoor locations, mainly in FTTH and FTTB systems.
The GPJ09-9401 round joint box can handle 12, 24 or 36 optical splices. It is suitable for various installation scenarios.
• IP 68
• Can be used in overhead systems, with telecommunication conduits etc.
• Compact size
• Space for 36 fiber optic splices
• 3 splice cassettes
• 2 input and 2 output ports
• Sealing material: self-vulcanizing rubber
• Can be used in overhead systems, with telecommunication conduits etc.
• Compact size
• Space for 36 fiber optic splices
• 3 splice cassettes
• 2 input and 2 output ports
• Sealing material: self-vulcanizing rubber
The GFP-12F-T-2 fiber optic coupler allows you to make a fiber optic connection including up to 12 splices. Flat design allows it to be used in locations with limited space.
• IP68 protection class
• Suitable for telecom ducting, underground systems
• Compact size
• Space for 12 fiber optic splices
• Suitable for telecom ducting, underground systems
• Compact size
• Space for 12 fiber optic splices
Horizontal straight-through joint repair joint. It is designed for 2 cables with an outer diameter not exceeding 6.5 mm.
• Material: PC+ABS
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 4 splices
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 4 splices
GFP-6P fiber optic coupler can be used in ground systems as a repair element or coupler for DAC cables with a maximum of 12 fibers.
• Material: PC+ABS
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 6/ 12 splices
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 6/ 12 splices