English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
F1-600 cleaver is designed for quick and accurate cutting of optical fibers with a cladding diameter of 125 µm and 250/900 um buffer coating diameters.
• Easy to use - no adjustment required
• Ceramic blade
• Graduated scale (2 to 20 mm)
• Ceramic blades designed for 6000 operations
• Ceramic blade
• Graduated scale (2 to 20 mm)
• Ceramic blades designed for 6000 operations
The Signal Fire S-06 L5882 fiber optic cleaver ensures maximum ease of use while maintaining the highest repeatability of cutting.
• Universal blade for cutting optical fibers
• Fibers in the coating from 250 μm to 900 μm
• Fibers in the 125 μm primary coating
• 3 mm flat cables/patch cables
• Cutting length: 10-20 mm
• Replaceable 16 position blade
• Fibers in the coating from 250 μm to 900 μm
• Fibers in the 125 μm primary coating
• 3 mm flat cables/patch cables
• Cutting length: 10-20 mm
• Replaceable 16 position blade
The blade is intended for the Signal Fire S-06 L5882 cleaver.
The HT-C151 scissors are used to trim the excess optical fiber and aramid fibers. Hardened steel blades ensure long product life.
• Super sharp
• Smooth cutting of aramid fibers, braids, etc.
• Lightweight and easy to use
• Hardened steel for long life
• Smooth cutting of aramid fibers, braids, etc.
• Lightweight and easy to use
• Hardened steel for long life
Universal, 3-hole fibre stripper.
• Openings for 250 µm, 900 µm fibres and 2-3 mm cables
• Convenient to use
• Blade lock possible
• Convenient to use
• Blade lock possible
Rotary Coaxial Stripper IDEAL 45-163 is a tool for cutting round tubes and jackets of fiber optic cables with diameter from 3 to 6.4 mm.
• Tool for slitting nicking of fiber-optic cables
• For diameters of cables/tubes from 3 to 6.4 mm
• Suitable also for copper cables
• Two adjustable blades for cross-cutting and one adjustable blade for longitudinal nicking
• One replacement blade
• Original American tool made in the U.S.A.
• For diameters of cables/tubes from 3 to 6.4 mm
• Suitable also for copper cables
• Two adjustable blades for cross-cutting and one adjustable blade for longitudinal nicking
• One replacement blade
• Original American tool made in the U.S.A.
Miller MSAT-5 Mid-Span Access Tool allows easy access to optical fibers in tubes without risk of damage.
• Applicable for tubes with five diameters, from 1.9 mm to 3.0 mm
• Safe for optical fibers
• Safe for optical fibers
The TP-T11 L5926 cutting tool is dedicated for loose tubes and DROP cables. This small and handy slitter has 4 channels for tubes/cables with different diameters.
• New! - slitter for FO tubes and cables
• Suitable for cables with diam. up to 3.3 mm
• Speeds up the preparation of a cable for splicing
• High quality blades in four channels
• Made of durable plastic
• Suitable for cables with diam. up to 3.3 mm
• Speeds up the preparation of a cable for splicing
• High quality blades in four channels
• Made of durable plastic
The T-T26 L5928 cutting tool is dedicated for loose tubes and DROP cables. This small and handy slitter is extremely easy to use.
• 5 slots for slitting tubes/cables
• Tube/cable diameter 4.5 - 11 mm
• Tube/cable diameter 4.5 - 11 mm
