EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The GRANDWAY FHO3100-D32 reflectometer is a device used to measure reflectance, estimate attenuation and analyse events in an optical transmission path.
• Wavelength 1310/1550 nm
• Dynamic range 32/30 dB
• 6.2-inch touchscreen
• Power meter, light source, VFL
• Capable of testing copper cabling
• Torch
• Can be operated via a smartphone or tablet
• Dynamic range 32/30 dB
• 6.2-inch touchscreen
• Power meter, light source, VFL
• Capable of testing copper cabling
• Torch
• Can be operated via a smartphone or tablet
OTDR ULTIMODE OR-30-S3S5S62B-iSMV is a device designed for measuring and diagnosing optical fibre connections.
• OTDR+OPM+OLS+VFL+LED
• Reflectometer and fibre optic connection tester
• 5-inch screen with multi-touch functionality (touchscreen)
• User-friendly interface similar to that of a smartphone
• Measurement at wavelengths 1310 nm, 1550 nm, 1625 nm
• Dynamics 32/30 dB
• Light source and power meter function for transmission measurements
• Visual VFL fault locator for basic optical line diagnostics
• Detailed analysis of the entire optical path up to 80 km long
• Assistance in verification of events and faults: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to verify "Pass/Fail"
• Possibility to create measurement reports pdf/xls
• Function of twisted pair cable tester and copper cable identification
• Reflectometer and fibre optic connection tester
• 5-inch screen with multi-touch functionality (touchscreen)
• User-friendly interface similar to that of a smartphone
• Measurement at wavelengths 1310 nm, 1550 nm, 1625 nm
• Dynamics 32/30 dB
• Light source and power meter function for transmission measurements
• Visual VFL fault locator for basic optical line diagnostics
• Detailed analysis of the entire optical path up to 80 km long
• Assistance in verification of events and faults: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to verify "Pass/Fail"
• Possibility to create measurement reports pdf/xls
• Function of twisted pair cable tester and copper cable identification
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 500 m
• Connectors: SC/APC – SC/APC
• Functional case
• Length: 500 m
• Connectors: SC/APC – SC/APC
• Functional case
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – LC/UPC
• Functional case
• Length: 150 m
• Connectors: SC/APC – LC/UPC
• Functional case
ULTIMODE OR-20-S3S5-iSMV is a device designed for measuring and diagnosing optical fibre connections. It combines the functions of: an OTDR, optical power meter, light source and visual fault locator.
• OTDR+OPM+OLS+VFL+LED
• Reflectometer and fibre optic connection tester
• 3.5 inch screen with multi-touch function (touch screen)
• User-friendly interface similar to smartphone interface
• Measurement at 1310 nm and 1550 nm wavelengths
• Light source and power meter function for transmission measurements
• Detailed analysis of the entire optical path of up to 80 km
• Assistance in verification of events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to create measurement reports pdf/xls
• Reflectometer and fibre optic connection tester
• 3.5 inch screen with multi-touch function (touch screen)
• User-friendly interface similar to smartphone interface
• Measurement at 1310 nm and 1550 nm wavelengths
• Light source and power meter function for transmission measurements
• Detailed analysis of the entire optical path of up to 80 km
• Assistance in verification of events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to create measurement reports pdf/xls
The ULTIMODE OPM-20T-V01 optical power meter is a device used to check the attenuation of the optical path of single- and multimode fibre optic networks.
• InGaAS detector
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
ULTIMODE VFL-V3-15 visual fault locator is designed to diagnose problems with fibre optic cabling. It emits visible light with a wavelength of 650 nm (red), which, when introduced into the fibre, escapes at excessive bends or fractures.
• Generated light with a wavelength of 650 nm
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester
ULTIMODE VFL-V1-10 visual fault locator is designed to diagnose problems with fibre optic cabling.
• Generated light with a wavelength of 650 nm
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – fixed and pulsed
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – fixed and pulsed
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – SC/APC
• Functional case
• Length: 150 m
• Connectors: SC/APC – SC/APC
• Functional case
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – SC/UPC
• Functional case
• Length: 150 m
• Connectors: SC/APC – SC/UPC
• Functional case
