GRANDWAY FHO3000L-D26 is an optical time-domain reflectometer used to measure reflectance, estimate loss and analyze events in optical paths. Affordable price and good parameters of the device are the reasons for a wide range of applications in testing optical networks, from point-to-point links to ...
• Diagnostics of optical paths with lengths up to a hundred or so kilometers
• 5-inch multi-touch screen
• Measurements of reflectance, estimation of loss and analysis of events at 1310 nm and 1550 nm wavelengths
• 26/24 dB dynamic range
• Built-in optical power meter and VLF source (visible light)
• FLM (Fiber Link Map) - graphical representation of events in the fiber link
• Memory of 40,000 measurements
• PC software for data analysis and reporting
• Small size, easy operation
Code: L5828
€988.71
Available

ULTIMODE OR-20-S3S5-iSMV is a device designed for measuring and diagnosing optical fibre connections. It combines the functions of: an OTDR, optical power meter, light source and visual fault locator.
• OTDR+OPM+OLS+VFL+LED
• OTDR and fibre optic connection tester
• 3.5 inch screen with multi-touch function
• User-friendly interface similar to that of a smartphone
• Measurement at 1310 nm and 1550 nm wavelengths
• 20 dB dynamics
• Light source and power meter function to perform measurements with the transmission method
• Detailed analysis of the entire optical path of up to 80 km
• Assistance to verify events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility of "Pass/Fail" verification
• Option for creating measurement reports pdf/xls
Code: L5830
€489.18
Available

Optical laser source GRANDWAY FHS2Q01F L5826 is the tool necessary for measuring optical power loss in fiber-optic networks (FTTx). The source generates laser beams of predetermined wavelengths and power for precise measurements.
• For multi mode and single mode fiber based networks
• Generated wavelength: 850 nm, 1300 nm, 1310 nm or 1550 nm
• Output power: -5.0 dBm
• Simple and intuitive operation
Code: L5826
€412.82
Available

Optical laser source GRANDWAY FHS1D02 L5825 is the tool necessary for measuring optical power loss in fiber-optic networks (FTTx). The source generates laser beams of predetermined wavelengths and power for precise measurements.
• Generated wavelength: 1310 nm / 1550 nm
• Output power: -5.0 dBm
• AUTO-OFF function
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
Code: L5825
€249.76
Available

Optical power meter GRANDWAY FHP2B04 L5822 measures optical power loss in fiber networks based on multimode and single-mode fibers. The meter is calibrated to measure optical power at six wavelengths (nm): 850, 1300, 1310, 1490, 1550, and 1625. A wide measuring range (-50...+26 dBm) and high accurac...
• New - optical power meter with measurement memory
• Memory of 999 measurements, communication with a PC via USB interface, PC application
• InGaAS detector
• Calibrated for the following wavelengths [nm]: 850, 1300, 1310, 1490, 1550, 1625
• Measurements of absolute optical power levels in dBm/milliwatts or relative levels with respect to a reference level in dB
• Resolution of 0.01 dB, measurement error ±5% ±10nW
• Powered from two AA rechargeable batteries, charged from the included AC charger
• AUTO-OFF function
• Set of accessories, including protective carrying case
Code: L5822
€176.39
Available

The TM102N-SM L5819 optical laser source is a tool necessary for attenuation measurements of optical path in networks based on multimode fibres.
• Generated wavelength: 850 nm or 1300 nm
• Output power: -7.0 dBm
• AUTO-OFF function when no activity is detected
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
Code: L5823
€144.94
Available

The TM102N-SM L5819 optical laser source is a tool necessary for measuring optical power loss in fiber-optic networks (FTTx)
• Generated wavelength: 1310 nm / 1550 nm
• Output power: -5.0 dBm
• AUTO-OFF function
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
Code: L5819
€112.94
Available

Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – SC/APC
• Functional case
Code: L58510
€80.24
Available

Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – LC/UPC
• Functional case
Code: L58514
€80.24
Available

Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – SC/UPC
• Functional case
Code: L58512
€80.24
Available

The ULTIMODE OPM-20T-V01 optical power meter is a device used to check the attenuation of the optical path of single- and multimode fibre optic networks.
• InGaAS detector
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
Code: L5810
€43.74
Available

The Ultimode OPM-2 optical power meter is a device used to check the attenuation of the optical path of single- and multimode fiber optic networks. The meter is calibrated for measurements in 10 wavelengths.
• InGaAS detector
• Measurement range: -70...+10 dBm
• Measurement of 10 wavelengths (850, 980, 1270, 1300, 1310, 1490, 1550, 1577, 1625, 1650 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
• Battery power 2x AAA.
Code: L5818
€43.09
€47.88
- 10%
Previous lowest price: €43.09
Available

The TM103N L5815 optical power meter is designed to measure optical power loss in multimode and single-mode fiber-optic networks.
• Cheap meter designed for fiber-optic installations
• 850, 1300, 1310, 1490, 1550, 1625 nm
• SC connector, FC adapter
• Measurement range: -50...+26 dBm
• Reference measurement function
• 3x AAA batteries
Code: L5815
€42.71
Available

ULTIMODE VFL-V3-15 visual fault locator is designed to diagnose problems with fibre optic cabling. It emits visible light with a wavelength of 650 nm (red), which, when introduced into the fibre, escapes at excessive bends or fractures.
• Generated light with a wavelength of 650 nm
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester.
Code: L5939
€25.11
Available

ULTIMODE VFL-V1-10 visual fault locator is designed to diagnose problems with fibre optic cabling.
• Generated light with a wavelength of 650 nm
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – fixed and pulsed
Code: L5936
€16.82
Available

The adapter allows for connecting 1.25 mm connectors (e.g. LC, E2000) to optical power meters, light sources, visual fault locators (e.g. L5935).
Code: L5937
€8.54
Available