New items: LAN & WLAN

• A scratch-resistant, high-brightness 7" IPS touchscreen that can be used even in direct sunlight
• A high-capacity 57.72 Wh battery (11.1 V, 5200 mAh) providing up to approx. 11 hours of operation
• Seamless support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for controlling PTZ cameras (Pelco-P, Pelco-D and over 30 other protocols)
• Quick search and connection function for IP cameras (automatic subnet matching, option to configure camera parameters)
• Capable of simultaneously displaying footage from up to 32 cameras
• Capable of performing digital zoom (8x) on camera footage
• Ability to record video and capture still images from cameras to the built-in memory
• HDMI input and output – ability to display the image from the recorder and connect an external monitor
• Wi-Fi support (2.4 GHz)
• Physical function buttons
• Tester for video, audio, data, network, Wi-Fi and PoE signals
• TDR reflectometer (locates breaks in UTP cables)
• UTP cable tester
• Built-in internal memory: 8 GB, supports microSD cards up to 128 GB
• Built-in torch
• Power output: 2 x DC 12 V / 3 A, DC 24 V / 2 A, PoE (802.3af/at/bt90), DC 5 V / 2 A (USB)

• A scratch-resistant, high-brightness 5.4" IPS touchscreen that can be used even in direct sunlight
• A high-capacity 24.79 Wh battery (7.4 V, 3350 mAh) providing up to approx. 5 hours’ operation
• Seamless support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for controlling PTZ cameras (Pelco-P, Pelco-D and over 30 other protocols)
• Quick search and connection function for IP cameras (automatic subnet matching, option to configure camera parameters)
• Ability to display images from up to 32 cameras simultaneously
• Capability to digitally zoom in on camera images
• Capability to record video and capture still images from cameras (memory card required)
• HDMI and VGA signal inputs – capability to display images from the recorder
• Wi-Fi support (2.4 GHz)
• Touch-sensitive function buttons
• Signal tester for video, audio, data, network, Wi-Fi and PoE
• TDR reflectometer (locates breaks in UTP cables)
• UTP cable tester
• Supports microSD cards up to 128 GB
• Built-in torch
• Power output: DC 12 V / 3 A, PoE (802.3af/at)

• Digital cable location
• Support for UTP and STP cables
• RJ45 cable pin sequence test
• Open circuit detection
• Short circuit detection between wires
• Detection of incorrectly crossed wires
• RJ45 connector crimping check
• Cable length measurement using the TDR method
• Measurement of the length of individual pairs
• Switch or router port location
• 100 Mb/s / 1 Gb/s connection recognition
• PoE power diagnostics
• PoE voltage measurement
• Identification of pairs used for power supply
• Determination of power polarity
• Measurement of PoE power whilst under load
• Non-contact voltage detection (NCV)
• Distinguishing between live and neutral wires
• LED torch

• Set of 10 RJ45 terminators
• Identification markings 1–10
• Designed for use with the Signal NT-48 tester
• Enables identification of the terminus of the cable under test
• Compatible with the UTP cabling test function
• Can be used during the diagnosis of multiple network lines
• Useful for acceptance testing and servicing of structured cabling systems
• Quick identification of cables between the rack and end sockets
• Allows several terminators to be left at various points in the installation and subsequent tests to be carried out from a single location

• Standard: Cat.6A
• Shielding: S/FTP
• Connectors: RJ45 plug – RJ45 socket
• Break-Away function to protect ports and devices
• Controlled disconnection at a force of approx. 10 N

• 24 ports
• Designed specifically for CCTV

• RJ45 socket-to-socket connector (8P8C)
• Cat.6A Class EA transmission category
• Supports 10 Gigabit Ethernet (10GBASE-T)
• Operating bandwidth up to 500 MHz
• Shielded STP construction
• Metal, ultra-slim housing
• Gold-plated contacts ensuring high durability and connection reliability
• 1:1 pin alignment
• Designed for splicing or extending RJ45 cables and patch cords.

• Cat 5e U/UTP telecommunications cable
• Conductor diameter: 0.45 ±0.01 mm
• Conductor: 99.97% oxygen-free copper (OFC)
• 4 pairs of twisted conductors
• Characteristic impedance: 100 ±15 Ω
• Transmission bandwidth: up to 100 MHz

• Type: surface-mounted box for 12 keystone modules
• Compatibility: Cat 5e / Cat 6 / Cat 6A (depending on the module used)
• Protective cover
• Installation: surface-mounted, no need to chime walls
• Colour: white
• Applications: LAN installations, telecommunications, audio-visual/IP surveillance (with the appropriate module)

• RJ45 female to RJ45 female connector (8P8C)
• Cat.6 Class E transmission category up to 250 MHz
• Unshielded UTP construction
• 1:1 pin mapping