SPECIAL OFFERS: LAN & WLAN

• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Ethernet ports: 8x FastEthernet 10/100 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s
• PoE ports: 6x 802.3at/af + 2x 802.3at/af HiPoE 90W
• Two SFP 1000 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30℃...65℃
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option

• Cable designed for 50 Ω installation: WLAN/GSM
• PE-coated outer cable
• UV resistant
• Low attenuation
• High screening efficiency (90 dB for 2.4 GHz)
• CPR class: Fca
• 500 metres

• Scratch-resistant 7" IPS touchscreen display with high brightness for operation even in sunlight
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A

• Cable types tested: UTP/STP cat. 5, 5e, 6, 7, telephone, coaxial
• Cable length measurement
• Measurement frequency: 130 kHz
• Measurement method: capacitive
• Maximum length: 2000 m
• Minimum length: 1 m
• "Find port" – quick search of the port in a network device
• Searching and testing cables in PoE mode (passive PoE)
• Pair integrity test
• Measuring voltages on individual conductors (POE)
• Transmitter voltage protection: 60 VAC / 48 VDC
• Auto-OFF function
• Battery discharge indicator
• Record of measurement results in the device memory
• Built-in visual fault locator (VFL) for optical cables
• Power: 9 V battery (included)

• Tested cable types: CAT 5, 5e, 6, 7 twisted pair (UTP/STP), telephone, coaxial
• Cable length testing
• Function - "find port" quick port search on network devices
• Cable search and testing in PoE mode (passive PoE)
• Pair integrity test
• PoE wire voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Recording of measurement results in the device memory
• "Find port" function - quick port search in network devices
• PING test
• IP Scan
• Quick identification of the connected network port

• Number of terminators: 8
• Cable types tested: twisted pair cat. 5, 5e, 6, 7 (UTP/STP)
• Identification of specific twisted pair cable

• Measurement and visualisation of signal quality and strength NB-IoT, CAT-M, LTE cat.1, GSM
• Antenna connectors (2xSMA)
• Two SIM card slots

• Pressing tip with cutting scissors
• Hook for pulling the wire out of the connector
• Shovel to remove the connector from the socket