EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Switch for 5 IP cameras, in outdoor housing, 6-port 10/100 Mbps (5xPoE + 1xUplink), PoE power supply on 4 pairs, integrated power supply 55 V 90 W.
• Compact size
• Powering 5 PoE 802. 3at/af or PASSIVE receivers
• Power can be switched off on selected PoE ports
• Clear optical indication of power and data transmission status
• Up to 40 W power per single PoE port (total 90 W power budget)
• Easy and fast startup without having to configure parameters
• High efficiency of integrated power supply (>90%)
• Additional screw connector makes it easy to pick up 55 VDC power to other devices
• Scalability by attaching additional switches of xPoE/IP series and IPB/IPUPS
• Supply of cables can be hidden inside the enclosure
• Cable exit through 2x29 mm rubber glands installed in the enclosure
• Cables with crimped plugs (after cutting the plugs) can be inserted
• Power cable and 2 brackets included for enclosure installation without compromising the IP55 protection degree
• Powering 5 PoE 802. 3at/af or PASSIVE receivers
• Power can be switched off on selected PoE ports
• Clear optical indication of power and data transmission status
• Up to 40 W power per single PoE port (total 90 W power budget)
• Easy and fast startup without having to configure parameters
• High efficiency of integrated power supply (>90%)
• Additional screw connector makes it easy to pick up 55 VDC power to other devices
• Scalability by attaching additional switches of xPoE/IP series and IPB/IPUPS
• Supply of cables can be hidden inside the enclosure
• Cable exit through 2x29 mm rubber glands installed in the enclosure
• Cables with crimped plugs (after cutting the plugs) can be inserted
• Power cable and 2 brackets included for enclosure installation without compromising the IP55 protection degree
PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
PoE switch acting as LAN extender/repeater. Allows the connection of 3 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at, 802.3bt or PoE Passive (PoE IN port)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear operational and identification status indication
• Low power consumption (< 0.5 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear operational and identification status indication
• Low power consumption (< 0.5 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
Gigabit PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
Gigabit, 5-port PoE switch with LAN extender function, ideal for connecting multiple devices (e.g. IP cameras) via a single UTP cable.
• Can be powered from another PoE switch in 802.3af, 802.3at, 802.3bt60, 802.3bt90 or PoE Passive (PoE IN port) standards
• Increases and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 4 PoE 802.3af/at/bt60 receivers
• Up to 90 W total power when powered via UTP
• Throughput of the device at 1000 Mbps
• Clear operating and identification status indication
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Increases and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 4 PoE 802.3af/at/bt60 receivers
• Up to 90 W total power when powered via UTP
• Throughput of the device at 1000 Mbps
• Clear operating and identification status indication
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
The extender set extends the range of the LAN (PoE) on the UTP cable up to 800 m. It is applicable when the PoE switch-receiver distance exceeds 100 m.
• Power supply possible from PoE switch in 802.3af, 802.3at standard, or PoE Passive (PoE IN port)
• Power available to PoE receiver up to 800 m (10 Mbps)
• 100 Mbps available up to a maximum of 500 m
• Clear operating status and bandwidth indication
• Easy and quick start-up without configuring parameters
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Wide operating temperature range
• Power available to PoE receiver up to 800 m (10 Mbps)
• 100 Mbps available up to a maximum of 500 m
• Clear operating status and bandwidth indication
• Easy and quick start-up without configuring parameters
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Wide operating temperature range
PoE switch in IP68 casing acting as LAN extender/repeater. Allows the connection of 3 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at, 802.3bt or PoE Passive (PoE IN port)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered via UTP
• High IP protection (IP68)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and identification
• Low power consumption (< 0.5 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range (-25°C...+65°C)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered via UTP
• High IP protection (IP68)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and identification
• Low power consumption (< 0.5 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range (-25°C...+65°C)
Desktop switch for smooth network transmission. It enables connections at a speed of 10/100/1000 Mbps.
• Number of 10/100 Mbps Ethernet ports: 0
• Number of 10/100/1000 Mbps Ethernet ports: 5
• SFP port count: 0
• Number of 10/100/1000 Mbps Ethernet ports: 5
• SFP port count: 0
Desktop switch for smooth network transmission. It enables connections at a speed of 10/100/1000 Mbps.
• Number of 10/100 Mbps Ethernet ports: 0
• Number of 10/100/1000 Mbps Ethernet ports: 8
• SFP port count: 0
• Number of 10/100/1000 Mbps Ethernet ports: 8
• SFP port count: 0
ULTIPOWER PoE switches are industrial type devices. They are designed for installations where there is increased dust, high or low temperatures.
• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Total of five 10/100 Mbps ports
• Four PoE 802.3af/at ports
• Two SFP 100 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30...65℃
• Operating humidity range: 5%...95%
• Functions: Extend, VLAN, PoE Auto Check
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Total of five 10/100 Mbps ports
• Four PoE 802.3af/at ports
• Two SFP 100 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30...65℃
• Operating humidity range: 5%...95%
• Functions: Extend, VLAN, PoE Auto Check
• DIN rail mounting option
