EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
This range includes components necessary for building local LAN networks based on copper cabling (twisted-pair cable) and wireless technology. The offer includes both, standard switches and industrial switches. Selected models feature PoE function that allows to power network devices via twisted-pair cable. PoE switches can be used in video surveillance systems (PoE supply for cameras) and to supply power to access points.
Access points together with WLAN antennas allow to build radio links operating in 2.4 GHz or 5 GHz band in 802.11n and 802.11ac standards.
The offer is complemented by a range of accessories dedicated for building IP networks, including RJ45 connectors and sockets as well as UTP patchcords.
Access points together with WLAN antennas allow to build radio links operating in 2.4 GHz or 5 GHz band in 802.11n and 802.11ac standards.
The offer is complemented by a range of accessories dedicated for building IP networks, including RJ45 connectors and sockets as well as UTP patchcords.
The MikroTik Cloud Router Switch CRS326-24G-2S+RM has MikroTik RouterOS or SwitchOS installed, 24xGE, an 800 MHz processor and 512 MB of RAM.
• Number of Ethernet ports: 24 (24xGE)
• Number of SFP ports: 2x 1000/10000 Mbps
• WiFi: none
• Operating system: Mikrotik
• Device type: Router/Switch
• Number of SFP ports: 2x 1000/10000 Mbps
• WiFi: none
• Operating system: Mikrotik
• Device type: Router/Switch
RouterBoard 750Gr-2 runs MikroTik RouterOS system. This 5-port Gigabit Ethernet router is equipped with 256 MB RAM.
• Number of Ethernet ports: 5 (5xGE)
• WiFi: not available
• Operating system: Mikrotik
• Device type: Router
• WiFi: not available
• Operating system: Mikrotik
• Device type: Router
The RouterBoard RB941-2nD-TC has a MikroTik system installed. The device features 4xFE, 802.11n wireless access point.
• Number of Ethernet ports: 4 (4xFE)
• WiFi: 802.11n
• Operating system: Mikrotik
• Device type: router
• WiFi: 802.11n
• Operating system: Mikrotik
• Device type: router
The RouterBoard 951 comes with MikroTik system installed. This board has 5 FE ports and a wireless access point working in 802.11n standard
• Number of Ethernet ports: 5 (5xFE)
• WiFi: 802.11n
• Operating system: Mikrotik
• Device type: Router
• WiFi: 802.11n
• Operating system: Mikrotik
• Device type: Router
Compliant with the N-standard, the Mercusys MW305R router allows to create wired and wireless network connections.
• 3 LAN 10/100 Mbps ports
• WiFi: 802.11n 300 Mbps
• 3x3 MIMO technology
• WPA2-PSK encryption
• Antennas: 3x 5 dBi
• WiFi: 802.11n 300 Mbps
• 3x3 MIMO technology
• WPA2-PSK encryption
• Antennas: 3x 5 dBi
The Mercusys AC12G Gigabit router operates according to the 802.11n or 802.11ac standard and allows for wired and wireless network connections.
• 3 10/100/1000 Mbps ports
• WiFi: 802.11ac 1300 Mbps (2.4 GHz, 5 GHz)
• WiFi: 2.4 GHz: 300 Mbps, 5 GHz: 867 Mbps
• WPA2-PSK encryption
• Antennas: 4 x 5 dBi
• WiFi: 802.11ac 1300 Mbps (2.4 GHz, 5 GHz)
• WiFi: 2.4 GHz: 300 Mbps, 5 GHz: 867 Mbps
• WPA2-PSK encryption
• Antennas: 4 x 5 dBi
The MikroTik RB260GS 5-port gigabit switch is equipped with an SFP port. The device runs on MikroTik's SwOS operating system.
• Number of Ethernet ports: 5 (5xGE)
• Number of SFP ports: 1x1000 Mbps
• WiFi: none
• Operating system: Mikrotik
• Device type: Switch
• Number of SFP ports: 1x1000 Mbps
• WiFi: none
• Operating system: Mikrotik
• Device type: Switch
PoE switch with integrated power supply in a DIN4 housing for mounting on a TH35 rail. It allows up to 3 IP PoE devices to be powered.
• Powers up to 3 PoE 802.3af/at/bt60 receivers
• Up to 120 W total power from the power supply
• High module efficiency >90%
• Redundant power supply (ensures power continuity through a second module)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and power consumption
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Up to 120 W total power from the power supply
• High module efficiency >90%
• Redundant power supply (ensures power continuity through a second module)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and power consumption
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
The xPoE-4-11A-HS has been designed as LAN extender (repeater) and PoE power supply.
• Compact device size
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100 Mbps switch)
• Up to 40 W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5 W)
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100 Mbps switch)
• Up to 40 W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5 W)
3-port PoE switch 10/100 Mbps, extender (1xPoE IN 802.3at/af + 2xPoE OUT), PoE (max 40W), sequential start PoE OUT
• Miniature design for mounting in camera base
• Powered from another PoE switch supporting 802.3at, 802.3af or passive standard (PoE IN port)
• Power up to 2 PoE receivers 802. 3at/af or Passive (PoE OUT ports)
• Cascade power supply (one switch powers another)
• Strengthens and distributes network signal (fully functional 100 Mbps switch)
up to 40 W total power
• Easy and fast startup without configuration of parameters
• Wide operating temperature range
• Very low power consumption (< 0.5 W)
• Sequential start of PoE outputs
• Powered from another PoE switch supporting 802.3at, 802.3af or passive standard (PoE IN port)
• Power up to 2 PoE receivers 802. 3at/af or Passive (PoE OUT ports)
• Cascade power supply (one switch powers another)
• Strengthens and distributes network signal (fully functional 100 Mbps switch)
up to 40 W total power
• Easy and fast startup without configuration of parameters
• Wide operating temperature range
• Very low power consumption (< 0.5 W)
• Sequential start of PoE outputs
Switch for 5 IP cameras, in outdoor housing, 6-port 10/100 Mbps (5xPoE + 1xUplink), PoE power supply on 4 pairs, integrated power supply 55 V 90 W.
• Compact size
• Powering 5 PoE 802. 3at/af or PASSIVE receivers
• Power can be switched off on selected PoE ports
• Clear optical indication of power and data transmission status
• Up to 40 W power per single PoE port (total 90 W power budget)
• Easy and fast startup without having to configure parameters
• High efficiency of integrated power supply (>90%)
• Additional screw connector makes it easy to pick up 55 VDC power to other devices
• Scalability by attaching additional switches of xPoE/IP series and IPB/IPUPS
• Supply of cables can be hidden inside the enclosure
• Cable exit through 2x29 mm rubber glands installed in the enclosure
• Cables with crimped plugs (after cutting the plugs) can be inserted
• Power cable and 2 brackets included for enclosure installation without compromising the IP55 protection degree
• Powering 5 PoE 802. 3at/af or PASSIVE receivers
• Power can be switched off on selected PoE ports
• Clear optical indication of power and data transmission status
• Up to 40 W power per single PoE port (total 90 W power budget)
• Easy and fast startup without having to configure parameters
• High efficiency of integrated power supply (>90%)
• Additional screw connector makes it easy to pick up 55 VDC power to other devices
• Scalability by attaching additional switches of xPoE/IP series and IPB/IPUPS
• Supply of cables can be hidden inside the enclosure
• Cable exit through 2x29 mm rubber glands installed in the enclosure
• Cables with crimped plugs (after cutting the plugs) can be inserted
• Power cable and 2 brackets included for enclosure installation without compromising the IP55 protection degree
PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
PoE switch acting as LAN extender/repeater. Allows the connection of 3 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at, 802.3bt or PoE Passive (PoE IN port)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear operational and identification status indication
• Low power consumption (< 0.5 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear operational and identification status indication
• Low power consumption (< 0.5 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
Gigabit PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
Gigabit, 5-port PoE switch with LAN extender function, ideal for connecting multiple devices (e.g. IP cameras) via a single UTP cable.
• Can be powered from another PoE switch in 802.3af, 802.3at, 802.3bt60, 802.3bt90 or PoE Passive (PoE IN port) standards
• Increases and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 4 PoE 802.3af/at/bt60 receivers
• Up to 90 W total power when powered via UTP
• Throughput of the device at 1000 Mbps
• Clear operating and identification status indication
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Increases and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 4 PoE 802.3af/at/bt60 receivers
• Up to 90 W total power when powered via UTP
• Throughput of the device at 1000 Mbps
• Clear operating and identification status indication
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
The extender set extends the range of the LAN (PoE) on the UTP cable up to 800 m. It is applicable when the PoE switch-receiver distance exceeds 100 m.
• Power supply possible from PoE switch in 802.3af, 802.3at standard, or PoE Passive (PoE IN port)
• Power available to PoE receiver up to 800 m (10 Mbps)
• 100 Mbps available up to a maximum of 500 m
• Clear operating status and bandwidth indication
• Easy and quick start-up without configuring parameters
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Wide operating temperature range
• Power available to PoE receiver up to 800 m (10 Mbps)
• 100 Mbps available up to a maximum of 500 m
• Clear operating status and bandwidth indication
• Easy and quick start-up without configuring parameters
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Wide operating temperature range
PoE switch in IP68 casing acting as LAN extender/repeater. Allows the connection of 3 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at, 802.3bt or PoE Passive (PoE IN port)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered via UTP
• High IP protection (IP68)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and identification
• Low power consumption (< 0.5 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range (-25°C...+65°C)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered via UTP
• High IP protection (IP68)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and identification
• Low power consumption (< 0.5 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range (-25°C...+65°C)
Desktop switch for smooth network transmission. It enables connections at a speed of 10/100/1000 Mbps.
• Number of 10/100 Mbps Ethernet ports: 0
• Number of 10/100/1000 Mbps Ethernet ports: 5
• SFP port count: 0
• Number of 10/100/1000 Mbps Ethernet ports: 5
• SFP port count: 0
Desktop switch for smooth network transmission. It enables connections at a speed of 10/100/1000 Mbps.
• Number of 10/100 Mbps Ethernet ports: 0
• Number of 10/100/1000 Mbps Ethernet ports: 8
• SFP port count: 0
• Number of 10/100/1000 Mbps Ethernet ports: 8
• SFP port count: 0
ULTIPOWER PoE switches are industrial type devices. They are designed for installations where there is increased dust, high or low temperatures.
• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Total of five 10/100 Mbps ports
• Four PoE 802.3af/at ports
• Two SFP 100 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30...65℃
• Operating humidity range: 5%...95%
• Functions: Extend, VLAN, PoE Auto Check
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Total of five 10/100 Mbps ports
• Four PoE 802.3af/at ports
• Two SFP 100 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30...65℃
• Operating humidity range: 5%...95%
• Functions: Extend, VLAN, PoE Auto Check
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device enabling smooth data transmission in 10/100/1000 Mbps Ethernet networks.
• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Ethernet ports: 8x FastEthernet 10/100 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s
• PoE ports: 6x 802.3at/af + 2x 802.3at/af HiPoE 90W
• Two SFP 1000 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30℃...65℃
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Ethernet ports: 8x FastEthernet 10/100 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s
• PoE ports: 6x 802.3at/af + 2x 802.3at/af HiPoE 90W
• Two SFP 1000 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30℃...65℃
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial type device. It is designed for installations where there is increased dust, high or low temperatures.
• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Power consumption without PoE load: <5 W
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s (PD port)
• PoE ports: 4 802.3af/at
• Fibre optic transmission: 2x SFP 1000 Mbps
• ESD protection: 6 kV
• Operating temperature range: -30°C...65°C
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
• Power supply option via UTP/FTP cable through the PD port (max. 60 W)
• Input supply voltage: 48-57 VDC
• Power consumption without PoE load: <5 W
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s (PD port)
• PoE ports: 4 802.3af/at
• Fibre optic transmission: 2x SFP 1000 Mbps
• ESD protection: 6 kV
• Operating temperature range: -30°C...65°C
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
• Power supply option via UTP/FTP cable through the PD port (max. 60 W)
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: without PoE load: <5 W
• Ethernet ports: 1x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 1
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: without PoE load: <5 W
• Ethernet ports: 1x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 1
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres with high or low temperatures.
• Protection degree: IP40
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: without PoE load: <5 W
• Ethernet ports: 2x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 2
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against ESD: 6 kV
• Operating temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: without PoE load: <5 W
• Ethernet ports: 2x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 2
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against ESD: 6 kV
• Operating temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial type device. It is designed for installations where there is increased dust, high or low temperatures.
• Protection degree: IP40
• Power supply: PoE 802.3at (1 port)
• Energy consumption: <5 W (without PoE)
• Ethernet ports: 2x GigabitEthernet 10/100/1000 Mbps
• PoE ports: PD port: 802.3at, PoE 802.3af/at
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -40...75℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Power supply: PoE 802.3at (1 port)
• Energy consumption: <5 W (without PoE)
• Ethernet ports: 2x GigabitEthernet 10/100/1000 Mbps
• PoE ports: PD port: 802.3at, PoE 802.3af/at
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -40...75℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
Industrial PoE Switch: PoE ULTIPOWER 341SFP 4xGE(2x PoE 802.3bt/at/af 90W, 2x PoE 802.3af/at), 1xSFP
The ULTIPOWER PoE switch is an industrial type device. It is designed for installations where there is increased dust, high or low temperatures.
• Protection degree: IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: < 5 W (without PoE)
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4: 2x 802.3af/at, 2x 802.3bt/at/af
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -30...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: < 5 W (without PoE)
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4: 2x 802.3af/at, 2x 802.3bt/at/af
• Fiber optic transmission: 1x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -30...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40
• Power supply: 48...57 VDC
• Power consumption: < 5 W (without PoE)
• Ethernet ports: 5x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4: 4 802.3af/at
• Protected against ESD: 6 kV
• Operating ambient temperature range: -30...65°C
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Power supply: 48...57 VDC
• Power consumption: < 5 W (without PoE)
• Ethernet ports: 5x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4: 4 802.3af/at
• Protected against ESD: 6 kV
• Operating ambient temperature range: -30...65°C
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial device. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40 ingress protection level
• Input supply voltage: 12-60 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: < 5 W (without PoE)
• Ethernet ports: 8x Fast Ethernet 10/100 Mbps
• Protection against ESD: 6 kV
• Operating temperature range: -35...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 12-60 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: < 5 W (without PoE)
• Ethernet ports: 8x Fast Ethernet 10/100 Mbps
• Protection against ESD: 6 kV
• Operating temperature range: -35...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switch is an industrial type device. It is designed for installations where there is increased dust, high or low temperatures.
• Protection degree: IP40 ingress protection level
• Input supply voltage: 12-60 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <5 W
• Ethernet ports: 5x GigabitEthernet 10/100/1000 Mbps
• Protection against ESD: 6 kV
• Operating temperature range: -30...65°C
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Input supply voltage: 12-60 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <5 W
• Ethernet ports: 5x GigabitEthernet 10/100/1000 Mbps
• Protection against ESD: 6 kV
• Operating temperature range: -30...65°C
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The ULTIPOWER PoE switches are industrial devices. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Protection degree: IP40
• Managed switch
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <20 W (without PoE)
• Ethernet ports: 12x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 12
• Fiber optic transmission: 4x SFP 1000 Mbps
• Protection against electrostatic discharge: 8 kV
• Operating ambient temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Managed switch
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <20 W (without PoE)
• Ethernet ports: 12x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 12
• Fiber optic transmission: 4x SFP 1000 Mbps
• Protection against electrostatic discharge: 8 kV
• Operating ambient temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
ULTIPOWER PoE Switches are industrial-type devices. It is designed for installations where there is increased dust, high or low temperatures.
• Protection degree: IP40
• Managed switch
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <20 W (without PoE)
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against electrostatic discharge: 8 kV
• Operating ambient temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
• Managed switch
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption: <20 W (without PoE)
• Ethernet ports: 4x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 4
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against electrostatic discharge: 8 kV
• Operating ambient temperature range: -40...65℃
• Permissible ambient humidity: 5...95%
• DIN rail mounting option
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af/at standard and supplies them with power.
• Small switch with PoE function
• Six 10/100 Mbps ports
• Four PoE IEEE802.3af/at ports
• Single PoE port transfers up to 30 W
• Maximum total power of powered devices 65 W
• Supports MAC address auto-learning and auto-aging (1K array size)
• LEDs indicating connection status, speed, activity and power supply
• Extended function for powering twisted-pair devices up to 250 m
• Six 10/100 Mbps ports
• Four PoE IEEE802.3af/at ports
• Single PoE port transfers up to 30 W
• Maximum total power of powered devices 65 W
• Supports MAC address auto-learning and auto-aging (1K array size)
• LEDs indicating connection status, speed, activity and power supply
• Extended function for powering twisted-pair devices up to 250 m
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af standard and supplies them with power.
• 5 RJ-45 10/100 Mbps ports including 4x PoE
• PoE power supply of up to 15 W per PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 62 W
• PoE power supply of up to 15 W per PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 62 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af standard and supplies them with power.
• Nine 10/100 Mbps RJ-45 ports including 4 x PoE
• PoE power supply up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 62 W
• PoE power supply up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 62 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af standard and supplies them with power.
• 9 RJ-45 10/100 Mbps ports
• 8 ports with PoE function
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 124 W
• 8 ports with PoE function
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 124 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af standard and supplies them with power.
• 8 RJ-45 10/100 Mbps ports including 8x PoE
• 2 RJ-45 10/100/1000 Mbps ports
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 124 W
• 2 RJ-45 10/100/1000 Mbps ports
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 124 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af/at standard and supplies them with power.
• 4 RJ-45 10/100 Mbps ports including 4x PoE
• 1 RJ-45 10/100/1000 Mbps port
• 1 SFP port
• PoE power supply of up to 30 W for each PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 65 W
• 1 RJ-45 10/100/1000 Mbps port
• 1 SFP port
• PoE power supply of up to 30 W for each PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 65 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af/at standard and supplies them with power.
• 10 RJ-45 10/100 Mbps ports including 8x PoE
• PoE power supply of up to 30 W per PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 110 W
• PoE power supply of up to 30 W per PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 110 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af/at standard and supplies them with power.
• 8 RJ-45 10/100 Mbps ports including 8x PoE
• 2 RJ-45 10/100/1000 Mbps ports
• PoE power supply of up to 30 W for each PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 120 W
• 2 RJ-45 10/100/1000 Mbps ports
• PoE power supply of up to 30 W for each PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 120 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating in 802.3af and supplies them with power.
• 16 RJ-45 10/100 Mbps ports including 16x PoE
• 2 RJ-45 10/100/1000 Mbps ports
• 2 SFP ports
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 250 W
• 2 RJ-45 10/100/1000 Mbps ports
• 2 SFP ports
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 250 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating in 802.3af and supplies them with power.
• 24 RJ-45 10/100 Mbps ports including 24x PoE
• 2 RJ-45 10/100/1000 Mbps ports
• 2 SFP ports
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 370 W
• 2 RJ-45 10/100/1000 Mbps ports
• 2 SFP ports
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 370 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under 802.3at and supplies them with power.
• 5 RJ-45 10/100 Mbps ports including 4x PoE
• PoE power supply of up to 30 W per PoE port
• Power supply compliant with IEEE802.3at standard
• Power budget: 120 W
• PoE power supply of up to 30 W per PoE port
• Power supply compliant with IEEE802.3at standard
• Power budget: 120 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af standard and supplies them with power.
• Eight 10/100/1000 Mbps PoE ports including 8x PoE
• PoE power supply up to 30 W per each PoE port
• Power supply compliant with IEEE802.3at
• Power budget: 125 W
• PoE power supply up to 30 W per each PoE port
• Power supply compliant with IEEE802.3at
• Power budget: 125 W
The ULTIPOWER PoE switches are industrial devices. Dedicated to systems operating in dusty atmospheres, high or low temperatures.
• Power supply: 100...240 V AC
• Energy consumption: < 15 W (without PoE)
• Ethernet ports: 8x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 8 (6x 802.3af/at, 2x 802.3af/at/bt)
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -10...50℃
• Permissible ambient humidity: 5...95%
• Energy consumption: < 15 W (without PoE)
• Ethernet ports: 8x GigabitEthernet 10/100/1000 Mbps
• PoE ports: 8 (6x 802.3af/at, 2x 802.3af/at/bt)
• Fiber optic transmission: 2x SFP 1000 Mbps
• Protection against electrostatic discharge: 6 kV
• Operating ambient temperature range: -10...50℃
• Permissible ambient humidity: 5...95%
The RouterBoard RBSXTsqG-5acD is a complete Customer Premises Equipment (CPE) MIMO 2x2 device compliant with the 802.11ac standard.
• Wi-Fi standard: 802.11 ac
• Antenna gain: 16 dBi
• Frequency: 5 GHz
• Ethernet port: 1x 10/100/1000 Mbps
• Power: 10-28 V (PoE adapter)
• Software: Mikrotik
• Antenna gain: 16 dBi
• Frequency: 5 GHz
• Ethernet port: 1x 10/100/1000 Mbps
• Power: 10-28 V (PoE adapter)
• Software: Mikrotik
The NanoStation Loco M5 is a solution designed to build radio bridges operating in the 5 GHz band and compatible with the 802.11n MIMO 2x2 standard.
• Wi-Fi standard: 802.11 a/n
• Antenna gain: 13 dBi
• Frequency: 5 GHz
• Ethernet port: 1x 10/100 Mbps
• Power: 24 V (PoE adapter)
• Software: AirOS
• Antenna gain: 13 dBi
• Frequency: 5 GHz
• Ethernet port: 1x 10/100 Mbps
• Power: 24 V (PoE adapter)
• Software: AirOS
The NanoStation Loco M2 is a solution designed to build radio bridges operating in the 2.4 GHz band and compatible with the 802.11n MIMO 2x2 standard.
• Wi-Fi standard: 802.11 a/n
• Antenna gain: 8.5 dBi
• Frequency: 2.4 GHz
• Ethernet port: 1x 10/100 Mbps
• Power: 24 V (PoE adapter)
• Software: AirOS
• Antenna gain: 8.5 dBi
• Frequency: 2.4 GHz
• Ethernet port: 1x 10/100 Mbps
• Power: 24 V (PoE adapter)
• Software: AirOS
The NanoBeam-5AC-19 is an 802.11ac access point operating in the 5 GHz band.
• Wi-Fi standard: 802.11 a/n/ac
• Antenna gain: 19 dBi
• Frequency: 5 GHz
• Ethernet port: 1x 10/100/1000 Mbps
• Power: 24 V (PoE adapter)
• Software: AirOS
• Antenna gain: 19 dBi
• Frequency: 5 GHz
• Ethernet port: 1x 10/100/1000 Mbps
• Power: 24 V (PoE adapter)
• Software: AirOS
The NanoBeam M5 is an 802.11n MIMO 2x2 access point operating in the 5 GHz band.
• Wi-Fi standard: 802.11 a/n
• Antenna gain: 16 dBi
• Frequency: 5 GHz
• Ethernet port: 1x 10/100 Mbps
• Power: 24 V (PoE adapter)
• Software: AirOS
• Antenna gain: 16 dBi
• Frequency: 5 GHz
• Ethernet port: 1x 10/100 Mbps
• Power: 24 V (PoE adapter)
• Software: AirOS
The NanoBeam M2 is a complete solution designed to build radio bridges operating in the 2.4 GHz band and compatible with the 802.11n MIMO 2x2 standard.
• Wi-Fi standard: 802.11 a/n
• Antenna gain: 18 dBi
• Frequency: 2.4 GHz
• Ethernet port: 1x 10/100 Mbps
• Power: 24 V (PoE adapter)
• Software: AirOS
• Antenna gain: 18 dBi
• Frequency: 2.4 GHz
• Ethernet port: 1x 10/100 Mbps
• Power: 24 V (PoE adapter)
• Software: AirOS
The PowerBeam M5 is a complete solution designed to build radio bridges operating in the 5 GHz band and compatible with the 802.11n MIMO 2x2 standard.
• Wi-Fi standard: 802.11 a/n
• Antenna gain: 25 dBi
• Frequency: 5 GHz
• Ethernet port: 1x 10/100 Mbps
• Power: 24 V (PoE adapter)
• Software: AirOS
• Antenna gain: 25 dBi
• Frequency: 5 GHz
• Ethernet port: 1x 10/100 Mbps
• Power: 24 V (PoE adapter)
• Software: AirOS
The Ubiquiti GBE Gigabeam is an access point operating in the 60 GHz band.
• Frequency: 60 GHz
• Maximum transfer rate up to 1 Gbps
• Ethernet port: 1x 10/100/1000 Mbps
• Power supply: 24 V (PoE adapter)
• Maximum transfer rate up to 1 Gbps
• Ethernet port: 1x 10/100/1000 Mbps
• Power supply: 24 V (PoE adapter)
Unifi devices are designed for business applications as a flexible, easy-to-install and manage wireless networking solution.
• Operating frequency 2.4 and 5 GHz
• 802.11 b/g/n/ac standard
• MIMO 3x3
• Speeds 2.4 GHz: 450 Mbps, 5 GHz: 1300 Mbps
• Power output max. 22 dBm
• Wall or ceiling mounting
• Administration via dedicated software or controller
• 802.11 b/g/n/ac standard
• MIMO 3x3
• Speeds 2.4 GHz: 450 Mbps, 5 GHz: 1300 Mbps
• Power output max. 22 dBm
• Wall or ceiling mounting
• Administration via dedicated software or controller
Unifi devices are designed for business applications as a flexible, easy-to-install and manage wireless networking solution.
• Operating frequency 2.4 and 5 GHz
• 802.11 b/g/n/ac standard
• MIMO 2x2
• Speeds 2.4 GHz: 300 Mbps, 5 GHz: 867 Mbps
• Power output max. 20 dBm
• Wall or ceiling mounting
• Administration via dedicated software or controller
• 802.11 b/g/n/ac standard
• MIMO 2x2
• Speeds 2.4 GHz: 300 Mbps, 5 GHz: 867 Mbps
• Power output max. 20 dBm
• Wall or ceiling mounting
• Administration via dedicated software or controller
Unifi devices are dedicated for business applications as a flexible, easy to install and manage solution for setting up a wireless network.
• 2.4 and 5 GHz operating frequencies
• Standard 802.11 b/g/n/ac/ax
• MIMO 4x4
• Speeds 2.4 GHz: 600 Mbps, 5 GHz: 2400 Mbps
• Power output max. 26 dBm
• Mounting on wall or ceiling
• Administration via dedicated software or controller
• Standard 802.11 b/g/n/ac/ax
• MIMO 4x4
• Speeds 2.4 GHz: 600 Mbps, 5 GHz: 2400 Mbps
• Power output max. 26 dBm
• Mounting on wall or ceiling
• Administration via dedicated software or controller
Unifi devices are designed for business applications as a flexible, easy-to-install and manage wireless networking solution.
• 2.4 and 5 GHz operating frequencies
• Standard 802.11 b/g/n/ac/ax
• MIMO 4x4
• Speeds 2.4 GHz: 573.5 Mbps, 5 GHz: 4800 Mbps
• Power output max. 26 dBm
• Mounting on wall or ceiling
• Administration via dedicated software or controller
• Standard 802.11 b/g/n/ac/ax
• MIMO 4x4
• Speeds 2.4 GHz: 573.5 Mbps, 5 GHz: 4800 Mbps
• Power output max. 26 dBm
• Mounting on wall or ceiling
• Administration via dedicated software or controller
Ubiguiti BulletM2 HP is a complete outdoor solution designed for professional wireless solutions.
• Operating frequency 2.4 GHz
• Standard 802.11 b/g/n/
• MIMO 2x2
• Speeds 2.4 GHz: 300 Mbps, 5 GHz: 867 Mbps
• Power output max. 20 dBm
• Wall or ceiling mounting
• Administration via dedicated software or controller
• Standard 802.11 b/g/n/
• MIMO 2x2
• Speeds 2.4 GHz: 300 Mbps, 5 GHz: 867 Mbps
• Power output max. 20 dBm
• Wall or ceiling mounting
• Administration via dedicated software or controller
The Mercusys MW300RE wireless signal booster is designed to increase the range and signal strength of an existing wireless network.
• WiFi: 802.11n 300 Mbps
• MIMO 3x3 technology
• WPA2-PSK encryption
• MIMO 3x3 technology
• WPA2-PSK encryption
The SFP-011M ULTIMODE module is used to extend the capabilities of network devices with the possibility of implementing transmission via optical fibre.
• Duplex transmission (2 optical fibres)
• Multimode fibres
• Wavelength 850 nm
• Transmission speed up to 155 Mbps
• Max. transmission distance up to 550 m
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• Multimode fibres
• Wavelength 850 nm
• Transmission speed up to 155 Mbps
• Max. transmission distance up to 550 m
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
Optical SFP module ULTIMODE-023G cooperates with multimode fibers up to 2 km long, at data transmission speeds up to 1.25 Gb/s.
• Duplex transmission (2 optical fibres)
• Multimode fibres
• Wavelength 1300 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 2 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• Multimode fibres
• Wavelength 1300 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 2 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
The ULTIMODE SFP-023M module is used to extend the capabilities of network devices with the implementation of transmission via fiber optics.
• Transmission type: duplex (2 optical fibers)
• Fiber: multimode
• Wavelength: 1300 nm
• Transmission rate: up to 155 Mbps
• Max. transmission distance: up to 2 km
• Type of optical connectors: LC
• Compatible with devices: ULTIMODE, TP-LINK and others
• Fiber: multimode
• Wavelength: 1300 nm
• Transmission rate: up to 155 Mbps
• Max. transmission distance: up to 2 km
• Type of optical connectors: LC
• Compatible with devices: ULTIMODE, TP-LINK and others
The SFP-203M ULTIMODE module is used to extend the capabilities of network devices with the possibility of implementing transmission via optical fibre.
• Duplex transmission (2 optical fibers)
• Single-mode fibers
• Wavelength 1310 nm
• Transmission speed up to 155 Mb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• Single-mode fibers
• Wavelength 1310 nm
• Transmission speed up to 155 Mb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
The SFP-203G ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• Duplex transmission (2 optical fibres)
• Single mode fibres
• Wavelength 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• Single mode fibres
• Wavelength 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
The SFP-203/5 ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
The SFP-205/3G ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1550 nm, Rx: 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1550 nm, Rx: 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
Optical SFP module ULTIMODE-203/5G LC cooperates with a single-mode fiber up to 20 km long, at data transmission speeds up to 1.25 Gb/s.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with Ultimode, TP-LINK and other devices
The SFP-205/3G ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1550 nm, Rx: 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1550 nm, Rx: 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with Ultimode, TP-LINK and other devices
The ULTIMODE SFP-403/5G module is used to extend the capabilities of network devices with the implementation of transmission via fiber optics.
• Transmission type: WDM (1 fiber optic)
• Fiber: single mode
• Tx: 1310 nm, Rx: 1550 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
• Fiber: single mode
• Tx: 1310 nm, Rx: 1550 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
The ULTIMODE SFP-405/3G module is used to extend the capabilities of network devices with the implementation of transmission via fiber optics.
• Transmission: type WDM (1 fiber optic)
• Fiber: single mode
• Tx: 1550 nm, Rx: 1310 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
• Fiber: single mode
• Tx: 1550 nm, Rx: 1310 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
ULTIMODE's SFP+ SR module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• Duplex transmission (2 optical fibres)
• Multimode fibres
• Wavelength 850 nm
• Transmission speed up to 10 Gbps
• Max. transmission distance up to 300 m
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
• Multimode fibres
• Wavelength 850 nm
• Transmission speed up to 10 Gbps
• Max. transmission distance up to 300 m
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
ULTIMODE's SFP+ LR module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• Duplex transmission (2 optical fibres)
• Single mode fibres
• Wavelength 1310 nm
• Transmission speed up to 10 Gbps
• Max. transmission distance up to 10 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
• Single mode fibres
• Wavelength 1310 nm
• Transmission speed up to 10 Gbps
• Max. transmission distance up to 10 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
The ULTIMODE SFP+ module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• BiDi/WDM transmission (1 optical fiber)
• Single-mode fiber
• Wavelength 1270/1330 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
• Single-mode fiber
• Wavelength 1270/1330 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
The ULTIMODE SFP+ module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• BiDi/WDM transmission (1 optical fiber)
• Single-mode fiber
• Wavelength 1330/1270 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
• Single-mode fiber
• Wavelength 1330/1270 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
An antenna for receiving and transmitting signals in the 2400-2480 MHz band. It has a gain of 8 dBi and is equipped with a 5 m cable terminated with an SMA R/P connector.
• Band: 2400-2480 MHz
• Gain: 8 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• 5 m cable
• Connector SMA R/P
• Gain: 8 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• 5 m cable
• Connector SMA R/P
An antenna for receiving and transmitting signals in the 2400-2480 MHz band. It has a gain of 8 dBi and is equipped with a 3 m cable terminated with an SMA R/P connector.
• Band: 2400-2480 MHz
• Gain: 8 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• 3 m cable
• Connector SMA R/P
• Gain: 8 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• 3 m cable
• Connector SMA R/P
Omnidirectional antenna for receiving and transmitting signals in the 2400-2480 MHz band. It has a gain of 10 dBi.
• Bandwidth 2400-2480 MHz
• Gain of 10 dBi
• VSWR <1.5
• Impedance 50 ohm
• omnidirectional antenna
• Gain of 10 dBi
• VSWR <1.5
• Impedance 50 ohm
• omnidirectional antenna
![Coaxial Cable 50 ohm: Tri-Lan 240 PE Fca [1 m]](https://www.dipol.com.pl/img/thumbnails/e1171_1+.jpg/8f17e219514e2424047a5e35262ad370.jpg)
Tri-Lan 240 WLL (external) used in 2.4 GHz and 5 GHz WLAN installations.
• Cable designed for 50 Ω installation: WLAN/GSM
• PE-coated outer cable
• UV resistant
• Low attenuation
• High screening efficiency (90 dB for 2.4 GHz)
• CPR class: Fca
• Sold by the metre
• PE-coated outer cable
• UV resistant
• Low attenuation
• High screening efficiency (90 dB for 2.4 GHz)
• CPR class: Fca
• Sold by the metre
![Coaxial Cable (50 ohm): Tri-Lan 240 PE Fca [100 m]](https://www.dipol.com.pl/img/thumbnails/e1171_100+.jpg/d66e3fbeb6345904c8b133533da0922e.jpg)
Tri-Lan 240 WLL (external) used in 2.4 GHz and 5 GHz WLAN installations.
• Cable designed for 50 Ω installation: WLAN/GSM
• PE-coated outer cable
• UV resistant
• Low attenuation
• High screening efficiency (90 dB for 2.4 GHz)
• CPR class: Fca
• 100 metres
• Cable in cardboard box or in hank (rewound from 500 m package)
• PE-coated outer cable
• UV resistant
• Low attenuation
• High screening efficiency (90 dB for 2.4 GHz)
• CPR class: Fca
• 100 metres
• Cable in cardboard box or in hank (rewound from 500 m package)
![Coaxial Cable (50 ohm): Tri-Lan 240 PE Fca [500 m]](https://www.dipol.com.pl/img/thumbnails/e1171_500+.jpg/6055d860b7185c37396bbfa676dcf7fc.jpg)
Tri-Lan 240 WLL (external) used in 2.4 GHz and 5 GHz WLAN installations.
• Cable designed for 50 Ω installation: WLAN/GSM
• PE-coated outer cable
• UV resistant
• Low attenuation
• High screening efficiency (90 dB for 2.4 GHz)
• CPR class: Fca
• 500 metres
• PE-coated outer cable
• UV resistant
• Low attenuation
• High screening efficiency (90 dB for 2.4 GHz)
• CPR class: Fca
• 500 metres
![Coaxial Cable (50 ohm): Tri-Lan 240 PVC (white) Eca [100 m]](https://www.dipol.com.pl/img/thumbnails/e1172_100+.jpg/dbbfe4928e8135e390ce4311a31a038b.jpg)
Tri-Lan 240 PVC (internal) used in 2.4 GHz and 5 GHz WLAN installations.
• Cable designed for 50 Ω installation: WLAN/GSM
• PVC-coated inner cable
• Low attenuation
• High screening efficiency (90 dB for 2.4 GHz)
• 100 metres
• PVC-coated inner cable
• Low attenuation
• High screening efficiency (90 dB for 2.4 GHz)
• 100 metres
![Coaxial Cable (50 ohm): Tri-Lan 400 WLL PE Fca [1 m]](https://www.dipol.com.pl/img/thumbnails/e1173_1+.jpg/99562f9ded1616636c48b8f3f3ccc878.jpg)
Tri-Lan 400 WLL (outdoor) used for 2.4 GHz and 5 GHz WLAN installations. Cable of modern design, low loss, for operation up to 6 GHz.
• Cable designed for 50 Ω installation: WLAN/GSM
• PE-coated outer cable
• UV resistant
• Very low attenuation (core diameter 2.7 mm)
• High screening efficiency (90 dB for 2.4 GHz)
• CPR class: Fca
• Sold by the metre
• PE-coated outer cable
• UV resistant
• Very low attenuation (core diameter 2.7 mm)
• High screening efficiency (90 dB for 2.4 GHz)
• CPR class: Fca
• Sold by the metre
![Coaxial Cable (50 ohm): Tri-Lan 400 WLL PE Fca [100 m]](https://www.dipol.com.pl/img/thumbnails/e1173_100+.jpg/0c76bda5b3b962cd89508d973707beff.jpg)
Tri-Lan 400 WLL (outdoor) used for 2.4 GHz and 5 GHz WLAN installations. Cable of modern design, low attenuation, for operation up to 6 GHz.
• Cable designed for 50 Ω installation: WLAN/GSM
• PE-coated outer cable
• UV resistant
• Very low attenuation (core diameter 2.7 mm)
• Excellent matching (30 dB for 2.4 GHz)
• CPR class: Fca
• 100 metres
• PE-coated outer cable
• UV resistant
• Very low attenuation (core diameter 2.7 mm)
• Excellent matching (30 dB for 2.4 GHz)
• CPR class: Fca
• 100 metres
NETSET U/UTP Category 5e twisted pair cable is the top quality twisted pair designed for professional indoor systems.
• Type of cable: U/UTP
• Category 5e
• Flammability class: B2ca
• Application: indoor
• PVC coating
• Wire diameter 0.49 mm (24 AWG)
• Carton 305 m
• Category 5e
• Flammability class: B2ca
• Application: indoor
• PVC coating
• Wire diameter 0.49 mm (24 AWG)
• Carton 305 m
![CAT 5e UTP Cable: NETSET U/UTP 5e [1 m], indoor](https://www.dipol.com.pl/img/thumbnails/e1408_1+.jpg/a630cf52df7a992e9e56e9545070da55.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 5e
• Application: indoor
• PVC sheath
• Conductor diameter 0.5 mm (24 AWG)
• Cable sold by metre
• Category 5e
• Application: indoor
• PVC sheath
• Conductor diameter 0.5 mm (24 AWG)
• Cable sold by metre
![CAT 5e UTP Cable: NETSET BOX U/UTP 5e [305 m], indoor](https://www.dipol.com.pl/img/thumbnails/e1408_305+.jpg/188e1484f397d90baef9c211d5b16e6f.jpg)
The NETSET BOX U/UTP CAT 5e cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).
• Cable type: U/UTP
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![Cat 5 UTP Cable: NETSET BOX U/UTP 5e (indoor) [500 m]](https://www.dipol.com.pl/img/thumbnails/e1408_500+.jpg/ac61ede939e81b2f87ddd78f10793c3f.jpg)
The NETSET BOX U/UTP CAT 5e cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).
• Cat 5e cable for indoor applications
• Parameters far exceeding the requirements for Category 5+ twisted pair cables
• Solid wires of 0.50 mm diameter (24 AWG)
• High quality confirmed by tests conducted by National Institute of Telecommunications in Warsaw, Poland
• Parameters far exceeding the requirements for Category 5+ twisted pair cables
• Solid wires of 0.50 mm diameter (24 AWG)
• High quality confirmed by tests conducted by National Institute of Telecommunications in Warsaw, Poland
![Cat. 5e UTP Cable: NETSET U/UTP 5e <br>(outdoor - gel-filled, black) [1 m]](https://www.dipol.com.pl/img/thumbnails/e1410_1+.jpg/a4a81cb97d9b1d5e5946fd9b4574e645.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 5e
• Application: outdoor, gel-filled
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
• Category 5e
• Application: outdoor, gel-filled
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
![CAT 5e UTP Cable: NETSET BOX U/UTP 5e <br>(outdoor - gel-filled, black) [305 m]](https://www.dipol.com.pl/img/thumbnails/e1410_305+.jpg/275219395bf9beba159cefa36587df33.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP, gel-filled
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![Cat. 5e UTP Cable: NETSET U/UTP PE (outdoor) [1 m]](https://www.dipol.com.pl/img/thumbnails/e1412_1+.jpg/5d0f0016367a10aea3405e28c052ce9a.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
![NETSET BOX U/UTP PE 5e black cable, outdoor twisted pair, flammability class Fca [305 m]](https://www.dipol.com.pl/img/thumbnails/e1412_305+.jpg/d3aa6bfff64795aad29b313689bcbf7c.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![CAT 5e UTP Cable: NETSET BOX U/UTP 5e [305 m] (indoor, Dca-s1,d2,a1)](https://www.dipol.com.pl/img/thumbnails/e1414_305+.jpg/4d076eb9744a66af90621126e87e298f.jpg)
NETSET U/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 5e
• Application: indoor
• LSZH sheath
• Flammability class Dca-s1,d2,a1
• Conductor diameter 0.49 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: indoor
• LSZH sheath
• Flammability class Dca-s1,d2,a1
• Conductor diameter 0.49 mm (24 AWG)
• Carton 305 m
![NETSET U/FTP 5e shielded twisted-pair cable, indoor use [1 m]](https://www.dipol.com.pl/img/thumbnails/e1515_1+.jpg/52a026ed24d4b3e3ecf959462a2b40e4.jpg)
The NETSET F/UTP CAT 5e is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: F/UTP
• Category 5e
• Applications: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Sold by the meter
• Category 5e
• Applications: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Sold by the meter
![CAT 5e FTP Shielded Cable: NETSET BOX F/UTP 5e [305 m], indoor](https://www.dipol.com.pl/img/thumbnails/e1515_305+.jpg/38b1eca8e5019a9912871f4792ea3eb6.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair cable designed for professional installations inside buildings.
• Cable type: F/UTP
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![Cat. 5e Shielded Cable: NETSET BOX F/UTP 5e [1 m], outdoor](https://www.dipol.com.pl/img/thumbnails/e1517_305+++.jpg/1aa3e823056582cd075b41a79e0c0c9e.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
![Cat. 5e Shielded Cable: NETSET BOX F/UTP 5e [305 m], outdoor](https://www.dipol.com.pl/img/thumbnails/e1517_305+.jpg/37e76cbe392c50176ed00ff2a4cf3aed.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![Cat 5e Shielded Cable: NETSET F/UTP 5e [100m] (PE, outdoor with messenger wire)](https://www.dipol.com.pl/img/thumbnails/e1519_100+.jpg/6c74171379103489eee624182c30eb5f.jpg)
NETSET F/UTP category 5e is the top quality twisted pair cable designed for professional outdoor systems.
• Cable type: F/UTP with carrier wire
• Category 5e
• Application: outdoor
• PE sheath
• Conductor diameter 0.51 mm (24 AWG)
• Section 100 m
• Category 5e
• Application: outdoor
• PE sheath
• Conductor diameter 0.51 mm (24 AWG)
• Section 100 m
![Cat 5e Shielded Cable: NETSET F/UTP 5e [200m] (PE, outdoor with messenger wire)](https://www.dipol.com.pl/img/thumbnails/e1519_200+.jpg/2cc4f0b72039eb3498ad7d9c5d9c6d2a.jpg)
NETSET F/UTP category 5e is the top quality twisted pair cable designed for professional outdoor systems.
• Cable type: F/UTP with messenger wire
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.51 mm (24 AWG)
• Section length 200 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.51 mm (24 AWG)
• Section length 200 m
![Cat. 5e shielded Cable: NETSET F/UTP 5e [500 m] (PE, outdoor, with messenger wire)](https://www.dipol.com.pl/img/thumbnails/e1519_500+.jpg/c005d32963d41cc29dd07c0696405e51.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP with carrier wire
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.51 mm (24 AWG)
• Spool 500 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.51 mm (24 AWG)
• Spool 500 m
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• Carton 305 m
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• Carton 305 m
![Cat. 6 Cable: NETSET BOX U/UTP 6 (indoor) [1 m]](https://www.dipol.com.pl/img/thumbnails/e1608_305+++.jpg/df36ca01f208b728c876d1154dcafe64.jpg)
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Conductor diameter 0.54 mm (23 AWG)
• Cable sold by the metre
• Category 6
• Application: indoor
• PVC sheath
• Conductor diameter 0.54 mm (23 AWG)
• Cable sold by the metre
![Cat. 6 UTP Cable: NETSET BOX U/UTP 6 (indoor) [305 m]](https://www.dipol.com.pl/img/thumbnails/e1608_305+.jpg/d1a0d00fd9618ca3e12077288aa2d562.jpg)
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• Carton 305 m
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• Carton 305 m
![NETSET BOX U/UTP cat. 6 indoor twisted pair cable [500 m]](https://www.dipol.com.pl/img/thumbnails/e1608_500+.jpg/0191b99ee18f6499036eb5832bf992d2.jpg)
NETSET U/UTP Category 6 twisted pair cable is the top quality twisted pair designed for professional indoor systems.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• 500 m drum
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• 500 m drum
![NETSET U/UTP PE category 6 black cable, outdoor twisted pair, flammability class Fca [1 m]](https://www.dipol.com.pl/img/thumbnails/e1610_305+.jpg/9596ddb9259eead966140be128aa123f.jpg)
NETSET U/UTP category 6 twisted pair cable is the highest quality twisted pair cable designed for professional outdoor installations.
• Cable type: U/UTP
• Category 6
• Application: outdoor
• LDPE sheath
• Core diameter 0.54 mm (23 AWG)
• Category 6
• Application: outdoor
• LDPE sheath
• Core diameter 0.54 mm (23 AWG)
![Cat. 6 UTP Cable: NETSET BOX U/UTP PE (outdoor) [305 m]](https://www.dipol.com.pl/img/thumbnails/e1610_305+++.jpg/462a3bd430375fca07c11dc68d1359d2.jpg)
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair cable designed for professional outdoor installations.
• Cable type: U/UTP
• Category 6
• Application: outdoor
• LDPE sheath
• Core diameter 0.54 mm (23 AWG)
• Box 305 m
• Category 6
• Application: outdoor
• LDPE sheath
• Core diameter 0.54 mm (23 AWG)
• Box 305 m
NETSET U/UTP category 6 gel-filled twisted pair is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
NETSET U/UTP category 6 gel-filled twisted pair is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
![Cat. 6 UTP Cable: NETSET F/UTP LSZH Dca s2 d2 a1 [500 m]](https://www.dipol.com.pl/img/thumbnails/e1612_500+.jpg/c4ffafed0bf27b8f5a4f11a67beaa7b1.jpg)
The NETSET F/UTP CAT 6 is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: F/UTP
• Category 6
• Applications: indoors
• LSZH sheath
• Reaction to fire: Dca-s2,d2,a1
• Conductor diameter 0.51 mm (24 AWG)
• 500 m spool
• Category 6
• Applications: indoors
• LSZH sheath
• Reaction to fire: Dca-s2,d2,a1
• Conductor diameter 0.51 mm (24 AWG)
• 500 m spool
NETSET F/UTP category 6 gel-filled twisted pair is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
NETSET F/UTP category 6 gel-filled twisted pair is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
![Cat. 6 UTP Cable: NETSET BOX U/UTP CAT 6 [305 m] (indoor, Dca-s2,d2,a1)](https://www.dipol.com.pl/img/thumbnails/e1614_305+.jpg/4aae5c80332300ae7bcfd56aabe1c59c.jpg)
The NETSET cable comes from the latest generation of UTP twisted pair cables. Its external diameter has been reduced to 5.9 mm, which considerably facilitates insertion of the cable into ducts and pipes. Special insulation material makes it easier to attach RJ-45 connectors.
• Cable type: U/UTP
• Category 6
• Application: indoor
• LSZH sheath
• Flammability class Dca-s2,d2,a1
• Conductor diameter 0,54 mm (24 AWG)
• Carton 305 m
• Category 6
• Application: indoor
• LSZH sheath
• Flammability class Dca-s2,d2,a1
• Conductor diameter 0,54 mm (24 AWG)
• Carton 305 m
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 6
• Uses: indoors
• LSZH sheath
• Fire class B2ca-s1a-d1-a1
• Conductor diameter 0.55 mm (24 AWG)
• Category 6
• Uses: indoors
• LSZH sheath
• Fire class B2ca-s1a-d1-a1
• Conductor diameter 0.55 mm (24 AWG)
NETSET U/FTP Category 6A twisted pair cable is the highest quality twisted pair cable designed for professional indoor installations.
• Cable type: U/FTP
• Category 6A
• Application: interior
• Flammability class B2ca s1a,d1,a1
• Conductor diameter 0.57 mm (23 AWG)
• Roll of 500 m
• Category 6A
• Application: interior
• Flammability class B2ca s1a,d1,a1
• Conductor diameter 0.57 mm (23 AWG)
• Roll of 500 m
The NETSET U/UTP cat. 6A is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: U/UTP
• Category 6A
• Uses: indoors
• Fire class B2ca s1a, d1, a1
• Conductor diameter 0.565 mm
• 500-metre reel
• Category 6A
• Uses: indoors
• Fire class B2ca s1a, d1, a1
• Conductor diameter 0.565 mm
• 500-metre reel
![Cat. 7 S/FTP Shielded Cable: NETSET BOX S/FTP CAT 7 [500 m] (indoor, Cca s1a d1 a1)](https://www.dipol.com.pl/img/thumbnails/e1626_500+.jpg/a28d2045190b2c3ef5e50643e9693a48.jpg)
NETSET S/FTP category 7 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: S/FTP
• Category 7
• Application: indoor
• LSZH sheath
• Conductor diameter 0,56 mm
• Roll of 500 m
• Category 7
• Application: indoor
• LSZH sheath
• Conductor diameter 0,56 mm
• Roll of 500 m
BNC connector designed for H155 coaxial cable with an impedance of 50 Ω.
• For H155 cable
• Impedance 50 ohms
• Impedance 50 ohms
A high quality N connector designed for Tri-Lan 240 cable, the connector is designed for use in installations up to 6 GHz.
• Designed for Tri-Lan 240 and Belden H-155 cable
• Operating band up to 6 GHz
• VSVR <1.3
• Operating band up to 6 GHz
• VSVR <1.3
A high quality N connector designed for Tri-Lan 240 cable, the connector is designed for use in installations up to 6 GHz.
• Designed for Tri-Lan 240 and Belden H-155 cable
• Operating band up to 6 GHz
• VSVR <1.3
• Operating band up to 6 GHz
• VSVR <1.3
A high quality TNC connector designed for Tri-Lan 240 cable, the connector is designed for use in installations up to 6 GHz.
• Designed for Tri-Lan 240 and Belden H-155 cable
• Operating band up to 6 GHz
• VSVR <1.3
• Operating band up to 6 GHz
• VSVR <1.3
A high quality SMA R/P connector designed for Tri-Lan 240 cable, the connector is designed for use in installations up to 6 GHz.
• Designed for Tri-Lan 240 and Belden H-155 cable
• Operating band up to 6 GHz
• VSVR <1.3
• Operating band up to 6 GHz
• VSVR <1.3
A high quality SMA R/P connector designed for Tri-Lan 240 cable, the connector is designed for use in installations up to 6 GHz.
• Designed for Tri-Lan 240 and Belden H-155 cable
• Operating band up to 6 GHz
• VSVR <1.3
• Operating band up to 6 GHz
• VSVR <1.3
A high quality FME connector designed for Tri-Lan 240 cable, the connector is designed for use in installations up to 6 GHz.
• Designed for Tri-Lan 240 and Belden H-155 cable
• Operating band up to 6 GHz
• VSVR <1.3
• Operating band up to 6 GHz
• VSVR <1.3
The adapter is used to change the connector of a device, cable or antenna.
• SMA and N type connectors
The transition is used to swap the connector in a device, cable or antenna.
• SMA R/P and N type connectors
The transition is used to swap the connector in a device, cable or antenna.
• SMA R/P and N type connectors
The transition is used to swap the connector in a device, cable or antenna.
• SMA R/P and N type connectors
The transition is used to swap the connector in a device, cable or antenna.
• SMA R/P and N type connectors
The transition is used to swap the connector in a device, cable or antenna.
• N-type connectors
The transition is used to swap the connector in a device, cable or antenna.
• N-type connectors
High-quality TNC R/P connector designed for H-155 cable.
• Designed for the H-155 cable
High-quality SMA connector designed for the H-155 cable.
• Designed for the H-155 cable
High-quality SMA connector designed for the H-155 cable.
• Designed for the H-155 cable
The transition is used to swap the connector in a device, cable or antenna.
• SMA and FME type connectors
High-quality N connector designed for the H500/1000 cable.
• Designed for cable H-500/H-1000
High-quality N connector designed for the CNT-400 cable.
• Designed for the CNT-400 cable
High-quality N connector designed for the CNT-400 cable.
• Designed for the CNT-400 cable
This connector is used in RF technology, for 50 ohm cables.
• Designed for the H-155 cable
The sleeve is used to clamp the connector onto the H-155 cable.
• Designed for the H-155 cable
RJ-12 modular connector in 6P6C standard, intended for termination of telephone cables and other low-current installations. The product enables quick and permanent termination of the cable using a modular connector crimping tool.
• Connector type: RJ-12
• Pin arrangement: 6P6C (6 positions / 6 pins)
• Casing material: transparent plastic
• Pins: metal
• Application: telephone cables and telecommunications installations
• Mounting: crimping with crimping tool for modular plugs
• Quantity per pack: 100 pcs
• Pin arrangement: 6P6C (6 positions / 6 pins)
• Casing material: transparent plastic
• Pins: metal
• Application: telephone cables and telecommunications installations
• Mounting: crimping with crimping tool for modular plugs
• Quantity per pack: 100 pcs
6P4C male connector, used for terminating cables in telephone installations.
• Wire type connectors
• Polycarbonate casing
• 100 pcs.
• Polycarbonate casing
• 100 pcs.
8P8C modular plug, shielded, category 5e, for FTP/STP cables (circular) with solid wires.
• Category 5e
• Connectors for wire type cable
• Polycarbonate housing
• 100 pcs.
• Connectors for wire type cable
• Polycarbonate housing
• 100 pcs.
Male connector 8P8C shielded, category 5e, for round cable, wire
• Category 5e
• Connectors for wire type cable
• Polycarbonate housing
• Connectors for wire type cable
• Polycarbonate housing
![8-pin Modular Plug (on solid wire) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/j2007+.jpg/bdf2344bd00e5f016bb2b3c14b661988.jpg)
Male RJ-45 connector (8P8C) category 5 for UTP/FTP cables (with solid wires), used for computer network cables.
• Category 5e
• Connectors for wire type cable
• Polycarbonate housing
• 100 pcs.
• Connectors for wire type cable
• Polycarbonate housing
• 100 pcs.
![8-pin Modular Plug (8P8C, cat. 5e, for solid wires) [1pc.]](https://www.dipol.com.pl/img/thumbnails/j2008+.jpg/cc11c6ec30826ea8bbbb94c36e71c89b.jpg)
Male connector 8P8C, category 5e, for round wire, wire.
• Category 5e
• Connectors for wire type cable
• Polycarbonate housing
• Connectors for wire type cable
• Polycarbonate housing
The STP cat. 6A self-clamping modular connector is designed for quick termination on twisted pair wire and cable.
• Self-clamping STP modular connector
• Category 6A
• Wire type connectors
• Category 6A
• Wire type connectors
The STP cat. 6 self-terminating modular plugs are suitable for quick installation on cables with solid or stranded wires.
• UTP self-terminating modular plug
• Category 6
• For solid or stranded wires
• Category 6
• For solid or stranded wires
8P8C shielded male connector, category 6A, for round wire type.
• Category 6A
• Wire type connectors
• 10 pcs.
• Wire type connectors
• 10 pcs.
![EZ Modular Plug 8p8c RJ-45 (cat. 5e, solid wire, EZ type) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/j2012_100+.jpg/3dda8f4d8a7b80c2b8e040e0c2ab1391.jpg)
Male 8P8C connector category 5e for computer network cables. Connector with a pass-through function for individual twisted pair cable conductors.
• Category 5e
• Plug for solid wires
• Pass-through for the conductors
• 100 pcs.
• Plug for solid wires
• Pass-through for the conductors
• 100 pcs.
![EZ Modular Plug 8p8c RJ-45 (cat. 6, for solid wires) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/j2013_100+.jpg/4c6d4224d4d49d2b51d4c00d7308db4c.jpg)
Male 8P8C connector category 6 for computer network cables. Connector with a pass-through function for individual twisted pair cable conductors.
• Category 6
• Plug for solid wires
• Pass-through for the conductors
• 100 pcs.
• Plug for solid wires
• Pass-through for the conductors
• 100 pcs.
![8-pin Modular Plug (cat. 6, on solid wire) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/j2016+.jpg/3ef2831318b671306c7b989018db1300.jpg)
Male connector 8P8C, category 6, for round wire, wire.
• Category 6
• Wire type connectors
• Polycarbonate housing
• 100 pcs.
• Wire type connectors
• Polycarbonate housing
• 100 pcs.
8P8C shielded male connector, category 6, for round wire type.
• Category 6
• Shielded
• Connectors for wire type cable
• 100 pcs.
• Shielded
• Connectors for wire type cable
• 100 pcs.
The Keystone module is designed for the construction of unshielded subscriber outlets and patch points in EN 50173 compliant installations.
• Connector type: RJ-45
• Category 5e
• Category 5e
The Keystone module is designed for the construction of unshielded subscriber outlets and patch points in EN 50173 compliant installations.
• Connector type: RJ-45
• Category 5e
• Tool-free installation
• Category 5e
• Tool-free installation
The Keystone module is designed for the construction of unshielded subscriber outlets and patch points in installations complying with EN 50173.
• Category 5e
• Black colour
• UTP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
• Black colour
• UTP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
Keystone module is designed for installation of unshielded subscriber outlets and patch points in EN 50173 compliant systems.
• 5e category
• UTP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
• UTP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
Keystone module is designed for installation of unshielded subscriber outlets and patch points in EN 50173 compliant systems.
• 5e category
• STP connector type (shielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
• STP connector type (shielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
Keystone module is designed for installation of unshielded subscriber outlets and patch points in EN 50173 compliant systems.
• Category 6
• STP connector type (shielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
• STP connector type (shielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
The Keystone module is designed for the construction of unshielded subscriber sockets and patch points in cat. 6 compliant installations.
• Connector type: RJ-45
• Category 6
• Category 6
The tool-free Keystone module is designed for the construction of unshielded subscriber outlets and patch points in CAT6-compliant installations.
• Connector type: RJ-45
• Category 6
• Tool-free installation
• Category 6
• Tool-free installation
The Keystone module is designed for the construction of unshielded subscriber outlets and patch points in EN 50173 compliant installations.
• Category 6
• Black colour
• UTP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, EN 50173
• Black colour
• UTP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, EN 50173
Keystone module is designed for installation of unshielded subscriber outlets and patch points in EN 50173 compliant systems.
• Category 6
• UTP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
• UTP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
The Keystone module is intended for the construction of shielded subscriber sockets and patch points in installations compliant with cat. 6A.
• Connector type: RJ-45
• Category 6A
• Shielded
• Tool-free installation
• Category 6A
• Shielded
• Tool-free installation
The tool-free Keystone module is designed for the construction of shielded subscriber outlets and patch points in CAT 6A-compliant installations.
• Connector type: RJ-45
• Category 6A
• Tool-free installation
• Category 6A
• Tool-free installation
Keystone module is designed for installation of unshielded subscriber outlets and patch points in EN 50173 compliant systems.
• Category 6A/class EA
• UTP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
• UTP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
The Keystone module is designed for the construction of unshielded subscriber outlets and patch points in installations complying with EN 50173.
• Category 6A/class EA
• Black colour
• UTP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
• Black colour
• UTP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
Keystone module is designed for installation of unshielded subscriber outlets and patch points in EN 50173 compliant systems.
• Category 6A/class EA
• STP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
• STP connector type (unshielded)
• Tool-free installation
• Standard: ISO/IEC 11801-1, EIA/TIA 568.2-D, IEC 60603-7-4, PN-EN 50173
Universal tool to facilitate the implementation, configuration and maintenance of CCTV systems and computer networks.
• Scratch-resistant 7" IPS touchscreen display with high brightness for operation even in sunlight
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A
The FS8114 tester is used for measuring cable continuity, measuring cable length and measuring the distance to cable damage.
• Cable types tested: UTP/STP cat. 5, 5e, 6, 7, telephone, coaxial
• Cable length measurement
• Measurement frequency: 130 kHz
• Measurement method: capacitive
• Maximum length: 2000 m
• Minimum length: 1 m
• "Find port" – quick search of the port in a network device
• Searching and testing cables in PoE mode (passive PoE)
• Pair integrity test
• Measuring voltages on individual conductors (POE)
• Transmitter voltage protection: 60 VAC / 48 VDC
• Auto-OFF function
• Battery discharge indicator
• Record of measurement results in the device memory
• Built-in visual fault locator (VFL) for optical cables
• Power: 9 V battery (included)
• Cable length measurement
• Measurement frequency: 130 kHz
• Measurement method: capacitive
• Maximum length: 2000 m
• Minimum length: 1 m
• "Find port" – quick search of the port in a network device
• Searching and testing cables in PoE mode (passive PoE)
• Pair integrity test
• Measuring voltages on individual conductors (POE)
• Transmitter voltage protection: 60 VAC / 48 VDC
• Auto-OFF function
• Battery discharge indicator
• Record of measurement results in the device memory
• Built-in visual fault locator (VFL) for optical cables
• Power: 9 V battery (included)
The FS8117 cable tester allows to test UTP/STP cables: cable quality, attenuation, length, distance to failure, short-circuit, improperly crimped connectors, Ping test, correct connection to the router, PoE voltage test, scan of active IPs in the network. Precision inductive probe – high power pair ...
• Tested cable types: CAT 5, 5e, 6, 7 twisted pair (UTP/STP), telephone, coaxial
• Cable length testing
• Function - "find port" quick port search on network devices
• Cable search and testing in PoE mode (passive PoE)
• Pair integrity test
• PoE wire voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Recording of measurement results in the device memory
• "Find port" function - quick port search in network devices
• PING test
• IP Scan
• Quick identification of the connected network port
• Cable length testing
• Function - "find port" quick port search on network devices
• Cable search and testing in PoE mode (passive PoE)
• Pair integrity test
• PoE wire voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Recording of measurement results in the device memory
• "Find port" function - quick port search in network devices
• PING test
• IP Scan
• Quick identification of the connected network port
Terminators enable detection and testing of 8 wires (ID2-ID9). They work with FORSCHER FS8117 N7051 meter.
• Number of terminators: 8
• Cable types tested: twisted pair cat. 5, 5e, 6, 7 (UTP/STP)
• Identification of specific twisted pair cable
• Cable types tested: twisted pair cat. 5, 5e, 6, 7 (UTP/STP)
• Identification of specific twisted pair cable
The tester is used to measure the continuity of the cabling. The device is equipped with a terminator.
• LAN cable continuity testing
• UTP, FTP and telephone cables
• RJ45 and RJ11 connectors
• UTP, FTP and telephone cables
• RJ45 and RJ11 connectors
NB-IoT / CAT-M /LTE cat.1 / GSM signal meter for installation, measurement and optimisation of IoT networks.
• Measurement and visualisation of signal quality and strength NB-IoT, CAT-M, LTE cat.1, GSM
• Antenna connectors (2xSMA)
• Two SIM card slots
• Antenna connectors (2xSMA)
• Two SIM card slots
A multifunctional service monitor for CCTV system installers. 7" touchscreen, compatible with all major standards.
• 7" IPS touchscreen
• 15 physical function buttons
• Support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI, CVBS, SDI
• Built-in Wi-Fi module (2.4 GHz, 5.8 GHz)
• HDMI input and output
• High-capacity 37 Wh battery providing approx. 8 hours of operation
• Video, audio, data, network, Wi-Fi and PoE signal tester
• TDR reflectometer (locates breaks in UTP cables)
• Fibre optic tester: optical power meter (OPM) and VFL (visual fault locator)
• UTP cable tester
• Digital multimeter (measures voltage, current, resistance, capacitance)
• RS-485 data analysis
• Built-in internal memory: 11 GB, supports microSD cards up to 32 GB
• Built-in torch (1 LED – 35 lm)
• Power output: DC 12 V / 2 A, PoE (802.3af/at), DC 5 V / 2 A (USB)
• 15 physical function buttons
• Support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI, CVBS, SDI
• Built-in Wi-Fi module (2.4 GHz, 5.8 GHz)
• HDMI input and output
• High-capacity 37 Wh battery providing approx. 8 hours of operation
• Video, audio, data, network, Wi-Fi and PoE signal tester
• TDR reflectometer (locates breaks in UTP cables)
• Fibre optic tester: optical power meter (OPM) and VFL (visual fault locator)
• UTP cable tester
• Digital multimeter (measures voltage, current, resistance, capacitance)
• RS-485 data analysis
• Built-in internal memory: 11 GB, supports microSD cards up to 32 GB
• Built-in torch (1 LED – 35 lm)
• Power output: DC 12 V / 2 A, PoE (802.3af/at), DC 5 V / 2 A (USB)
Protector used to protect GSM amplifiers against surges.
• Maximum power 200 W
• VSWR <1.1
• 0.2 dB attenuation
• VSWR <1.1
• 0.2 dB attenuation
Crimping tool for 8P8C (RJ-45), 6P6C (RJ-12), 6P4C (RJ-11) modular plugs.
• For 8P8C (RJ-45), 6P6C (RJ-12), 6P4C (RJ-11) connectors
• Insulation cutter and stripper
• Built-in back-movement lock mechanism
• Insulation cutter and stripper
• Built-in back-movement lock mechanism
Modular connector crimping machine with stranding option. Designed for EZ connectors (with loop through for individual stranded wires).
• Dedicated to EZ connectors
• Cutter and stripper (for flat cable)
• Crimping tool reverse movement lock
• Cutter and stripper (for flat cable)
• Crimping tool reverse movement lock
Modular connector crimping machine with option to cut off excess stranded wires. Designed for EZ connectors (with loop through for individual stranded wires).
• Dedicated for EZ connectors
• Cutter and stripper
• Crimping tool return lock
• Cutter and stripper
• Crimping tool return lock
The tool is used to assemble 6P, 8P "classic" and 8P shielded modular connectors with cable clamp.
• 6P (RJ10-6P2C, RJ11-6P4C, RJ12-6P6C)
• 8P (RJ45-8P8C)
• 8P (RJ45-8P8C) shielded with cable clamp
• cable clamp crimping tool
• 8P (RJ45-8P8C)
• 8P (RJ45-8P8C) shielded with cable clamp
• cable clamp crimping tool
Professional crimping tool for making connections of network cables, telephone cables, etc.
• Connector crimper RJ-45, RJ-11, RJ-12
• Stripper
• Cable cutter
• Tester
• Stripper
• Cable cutter
• Tester
Professional crimping tool for making connections of network cables, telephone cables, etc.
• RJ-45, RJ-11, RJ-12 crimping tool
• Cable stripper for flat cables
• Cable cutter
• Cable stripper for flat cables
• Cable cutter
A tool designed for quick, safe and convenient removal of baskets mounted in RACK cabinets.
• Adjustable
• Material: aluminium
• Material: aluminium
Krone type crimping tool for inserting (killing) cables in telecommunications installations.
• Pressing tip with cutting scissors
• Hook for pulling the wire out of the connector
• Shovel to remove the connector from the socket
• Hook for pulling the wire out of the connector
• Shovel to remove the connector from the socket
Krone type crimping tool for inserting cables in telecommunications installations.
• Pressing tip with cutting scissors
• Hook for pulling the wire out of the connector
• Shovel to remove the connector from the socket
• Hook for pulling the wire out of the connector
• Shovel to remove the connector from the socket
A tool equipped with a stripper, with which we can easily strip the wires and then insert them into IDC connectors.
• For cables with a diameter of 1 to 7 mm
• For insertion type 110/88/LSA
• For UTP and STP round cables
• For insertion type 110/88/LSA
• For UTP and STP round cables
Connector crimping machine for coaxial cables.
• Crimping tool for F, BNC and other connectors
• Crimping connectors on RG-174, H-155, RG-6 cables
• Made of durable materials
• Crimping connectors on RG-174, H-155, RG-6 cables
• Made of durable materials
Precision pliers made of stainless steel for exceptionally accurate cutting of stranded cable conductors and more.
• Precision pliers made of stainless steel for cutting stranded copper conductors of max. fi Ø 1.3 mm or AWG 16
• Precision pliers made of stainless steel for extremely fine cutting of stranded wire conductors
• Sanded, extra sharp cutting edges for flat cutting
• Not intended for cutting steel wires
• Blades separately induction hardened
• Hinge with stainless steel rivet
• Spring to open and limit opening
• Colour: red
• Packaging: blister
• Arms length: 115 mm
• Slip-resistant handles
• Precision pliers made of stainless steel for extremely fine cutting of stranded wire conductors
• Sanded, extra sharp cutting edges for flat cutting
• Not intended for cutting steel wires
• Blades separately induction hardened
• Hinge with stainless steel rivet
• Spring to open and limit opening
• Colour: red
• Packaging: blister
• Arms length: 115 mm
• Slip-resistant handles
The connector is used to connect an external antenna to a GPRS/UMTS/LTE/LTE modem in order to strengthen the signal of the mobile operator.
• Enables connection of an external antenna to a GPRS/UMTS/LTE modem
• List of compatible devices in the data sheet
• List of compatible devices in the data sheet
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to amplify the signal of the mobile operator.
• Enables connection of an external antenna to a GPRS/UMTS/LTE modem
• List of compatible devices in the data sheet
• List of compatible devices in the data sheet
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to amplify the signal of the mobile operator.
• Enables connection of an external antenna to a GPRS/UMTS/LTE modem
• List of compatible devices in the data sheet
• List of compatible devices in the data sheet
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Enables connection of an external antenna to a GPRS/UMTS/LTE modem
• List of compatible devices in the data sheet
• List of compatible devices in the data sheet
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Allows connection of external antenna to GPRS/UMTS/LTE modem
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Allows connection of external antenna to GPRS/UMTS/LTE modem
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Connector length 25 cm
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Connector length 10 cm
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Connector length 20 cm
The connector connects an external antenna to a GPRS/UMTS/LTE modem in order to amplify the signal from the mobile operator.
• Length 20 cm
• For connecting GPRS/UMTS/LT antennas
• For connecting GPRS/UMTS/LT antennas
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Connector length 3 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-plug - N-socket
• Connector length 5 m
• Connector length 5 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-plug - N-plug
• Connector length: 1 m
• Connector length: 1 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-plug - N-plug
• Connector length 5 m
• Connector length 5 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Connector length 10 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-plug - N-plug
• Connector length: 15 m
• Connector length: 15 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-male - SMA-male
• Connector length: 0.5 m
• Connector length: 0.5 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-male - SMA-male
• Connector length: 1 m
• Connector length: 1 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-male- SMA-male
• Connector length: 2 m
• Connector length: 2 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-plug - SMA-plug
• Connector length 5 m
• Connector length 5 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Connector length 10 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• N-plug - FME-socket
• Connector length 5 m
• Connector length 5 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Connector length 10 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Connector length 3 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• SMA R/P connector - N-plug
• Connector length 5 m
• Connector length 5 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Connector length 10 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• SMA connector - SMA socket
• Connector length 5 m
• Connector length 5 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• SMA connector - SMA socket
• Connector length 10 m
• Connector length 10 m
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• SMA - SMA connector
• Connector length 5 m
• Connector length 5 m
![RJ-45 modular plug cover [1 pc]](https://www.dipol.com.pl/img/thumbnails/j2010+.jpg/4f49685de7922fc607d15471c3f902ed.jpg)
External cover to supplement and protect the modular plug.
• Designed for RJ-45 connectors
![Modular Plug Boot (RJ-45, blue) [1 pc]](https://www.dipol.com.pl/img/thumbnails/j2021+.jpg/0e7c5b5c501f15eef2083195bdb5d212.jpg)
The modular plug boot for twisted pair cable is used in patch panels and active devices, with narrow spacing between the RJ-45 sockets.
• Dedicated to RJ-45 connectors
• Mounting inside the connector
• Blue colour
• Mounting inside the connector
• Blue colour
The modular plug boot for twisted pair cable is used in patch panels and active devices, with narrow spacing between the RJ-45 sockets.
• Dedicated to RJ-45 connectors
• Mounting inside the connector
• Blue color
• 100 pcs.
• Mounting inside the connector
• Blue color
• 100 pcs.
![Modular Plug Boot (RJ-45, red) [1 pc]](https://www.dipol.com.pl/img/thumbnails/j2022+.jpg/c98a012df8582912bfd313795ced98f7.jpg)
The modular plug boot for twisted pair cable is used in patch panels and active devices, with narrow spacing between the RJ-45 sockets.
• Dedicated to RJ-45 connectors
• Mounting inside the connector
• Red colour
• Mounting inside the connector
• Red colour
The modular plug boot for twisted pair cable is used in patch panels and active devices, with narrow spacing between the RJ-45 sockets.
• Dedicated to RJ-45 connectors
• Mounting inside the connector
• Red color
• 100 pcs.
• Mounting inside the connector
• Red color
• 100 pcs.
![Modular Plug Boot (RJ-45, green) [1 pc]](https://www.dipol.com.pl/img/thumbnails/j2023+.jpg/461d6817e4784a2ba443f1d29265b2d4.jpg)
The internal twisted pair cover is used in patch panels and active devices where RJ-45 sockets are located very close to each other.
• Dedicated to RJ-45 connectors
• Mounting inside the connector
• Green colour
• Mounting inside the connector
• Green colour
The modular plug boot for twisted pair cable is used in patch panels and active devices, with narrow spacing between the RJ-45 sockets.
• Dedicated to RJ-45 connectors
• Mounting inside the connector
• Green color
• 100 pcs.
• Mounting inside the connector
• Green color
• 100 pcs.
![Modular plug boot (RJ-45, yellow) [1 pc]](https://www.dipol.com.pl/img/thumbnails/j2024+.jpg/a58e21358758d27a603746df41e7da01.jpg)
The modular plug boot for twisted pair cable is used in patch panels and active devices, with narrow spacing between the RJ-45 sockets.
• Dedicated to RJ-45 connectors
• Mounting inside the connector
• Yellow colour
• Mounting inside the connector
• Yellow colour
The modular plug boot for twisted pair cable is used in patch panels and active devices, with narrow spacing between the RJ-45 sockets.
• Dedicated to RJ-45 connectors
• Mounting inside the connector
• Yellow colour
• 100 pcs.
• Mounting inside the connector
• Yellow colour
• 100 pcs.
![RJ-45 modular plug inner cover black [1 pc]](https://www.dipol.com.pl/img/thumbnails/j2025+.jpg/364b695548f6598c2e91576472f6efac.jpg)
The modular plug boot for twisted pair cable is used in patch panels and active devices, with narrow spacing between the RJ-45 sockets.
• Dedicated to RJ-45 connectors
• Mounting inside the connector
• Black colour
• Mounting inside the connector
• Black colour
The modular plug boot for twisted pair cable is used in patch panels and active devices, with narrow spacing between the RJ-45 sockets.
• Dedicated to RJ-45 connectors
• Mounting inside the connector
• Black colour
• 100 pcs.
• Mounting inside the connector
• Black colour
• 100 pcs.
![Slim-line modular plug boot (RJ-45, gray) [1 pc]](https://www.dipol.com.pl/img/thumbnails/j2026+.jpg/fcfdeefae46f4f434c23a8b860d10369.jpg)
The internal twisted pair cover is used in patch panels and active devices where RJ-45 sockets are located very close to each other.
The modular plug boot for twisted pair cable is used in patch panels and active devices, with narrow spacing between the RJ-45 sockets.
• Dedicated to RJ-45 connectors
• Mounting inside the connector
• Gray colour
• 100 pcs.
• Mounting inside the connector
• Gray colour
• 100 pcs.
The junction box allows for easy connection of two sections of shielded cat. 5e twisted pair cable.
• Cat. 5e
• Shielded
• IDC connectors
• Color markings
• Dimensions: 66x36x26 mm
• Shielded
• IDC connectors
• Color markings
• Dimensions: 66x36x26 mm
The double socket is intended for the realization and extension of computer network installations.
• RJ-45 double network socket
• Transmission category: cat 6
• Module standard: Keystone
• Ethernet network support 10/100/1000 Mb/s
• Compatible with typical Keystone installation equipment
• Solid construction for durability and stability of connection
• Designed for installation in structured cabling systems
• Transmission category: cat 6
• Module standard: Keystone
• Ethernet network support 10/100/1000 Mb/s
• Compatible with typical Keystone installation equipment
• Solid construction for durability and stability of connection
• Designed for installation in structured cabling systems
The junction box allows for easy connection of two sections of shielded CAT 5e/6/6A/7 twisted pair cable, not fitted with connectors.
• Cat. 5e/6/6A/7
• Shielded
• IDC-type connectors
• Color labels
• Dimensions: 83x38x25 mm
• Shielded
• IDC-type connectors
• Color labels
• Dimensions: 83x38x25 mm
It is used to connect cables with RJ-45 connectors and has two 8P8C sockets.
• Two RJ-45 sockets
• Category 5e
• Category 5e
The adapter is used to connect cables terminated with RJ-45 cat. 6 plugs. It has two 8P8C sockets. The casing is made of ABS.
• Two RJ-45 sockets
• Category 6
• Category 6
The cat. 6 waterproof connector allows two sections of cat. 5e/6 twisted-pair cable with RJ-45 connectors to be easily connected.
• Cat. 5e/6
• Shielded
• RJ-45 plugs
• Cable diameter: 3 to 8 mm
• Dimensions: 135x25x25 mm
• Shielded
• RJ-45 plugs
• Cable diameter: 3 to 8 mm
• Dimensions: 135x25x25 mm
The CAT 6A waterproof connection connector allows for easy connection of two sections of cat. 5e/6 twisted-pair cable fitted with RJ-45 connectors.
• Category 5e/6/7
• Shielded
• RJ-45 type connectors
• Cable diameter from 3 to 8 mm
• Dimensions: 135x25x25 mm
• Shielded
• RJ-45 type connectors
• Cable diameter from 3 to 8 mm
• Dimensions: 135x25x25 mm
DIN rail mounting adapter for the installation of keystone modules in a protective housing.
• Mounting on standard DIN rail TS35
• Supports keystone modules (e.g. RJ45, audio, category 5e/6/6A - depending on the module used)
• Supports keystone modules (e.g. RJ45, audio, category 5e/6/6A - depending on the module used)
Industrial RJ45 STP cat.6A socket in trapezoidal housing designed for use in demanding environmental conditions.
• Connector: RJ45 shielded (STP)
• Keystone
• Category: 6A (10 Gigabit Ethernet)
• Form: trapezoidal / panel socket for mounting in panel openings
• Compatible with industrial LAN installations
• Resistant housing for use in industrial environments
• Reduction of EMI interference through shielding
• Possibility to use shielded STP/FTP cables depending on the installation.
• Keystone
• Category: 6A (10 Gigabit Ethernet)
• Form: trapezoidal / panel socket for mounting in panel openings
• Compatible with industrial LAN installations
• Resistant housing for use in industrial environments
• Reduction of EMI interference through shielding
• Possibility to use shielded STP/FTP cables depending on the installation.
Keystone modular connector with two RJ-45 cat. 5e sockets. Allows two sections of twisted pair cable, terminated with RJ-45 connectors on both sides, to be connected together.
• Connector type: RJ-45
• Category 5e
• Category 5e
The angle adapter changes the insertion method of the RJ45 plug
• Class: Cat.6, Class E - 250MHz band.
• Connectors: RJ45/8P8C male, RJ45/8P8C female, gold plated contacts.
• Dimensions: 50x18x33 mm
• Mass: approx. 19g
• Connectors: RJ45/8P8C male, RJ45/8P8C female, gold plated contacts.
• Dimensions: 50x18x33 mm
• Mass: approx. 19g
Black keystone plug, designed to fill empty spaces in patch panels, wall sockets and enclosures compatible with the keystone standard.
• Standard: keystone
• Colour: black
• Purpose: plugging unused ports in panels and sockets
• Protection against dust, dirt and accidental damage to the connector
• Easy installation without tools - keystone clip
• Number per pack: 10 pieces
• Colour: black
• Purpose: plugging unused ports in panels and sockets
• Protection against dust, dirt and accidental damage to the connector
• Easy installation without tools - keystone clip
• Number per pack: 10 pieces
![Surface-mounted cat. 5e UTP RJ-45 [8P8C] single socket](https://www.dipol.com.pl/img/thumbnails/j2710+.jpg/676910ce4126880e1136509b1d8ab618.jpg)
The cat. 5e flush-mounted socket is used to terminate cables routed e.g. from the distribution board.
• Category 5e
• Number of connectors: 1
• Connector type: RJ-45
• Number of connectors: 1
• Connector type: RJ-45
Surface-mounting box designed for the installation of one keystone module compliant with cat. 5e, cat. 6 or cat. 6A standards.
• Type: surface box for 1 keystone module
• Compatibility: cat. 5e / cat. 6 / cat. 6A (depending on the module used)
• Protective closing flap
• Mounting: surface-mounted, no need to drill in walls
• Colour: white
• Application: LAN, data communication, RTV/IP monitoring installations (with appropriate module)
• Compatibility: cat. 5e / cat. 6 / cat. 6A (depending on the module used)
• Protective closing flap
• Mounting: surface-mounted, no need to drill in walls
• Colour: white
• Application: LAN, data communication, RTV/IP monitoring installations (with appropriate module)
The socket connector is used in LANs e.g. for terminating cables led from a technical room to terminal points.
![Surface-mounted cat. 6A STP RJ-45 [8P8C] double socket](https://www.dipol.com.pl/img/thumbnails/j2721+.jpg/165d70ffc6ba53c310b5ba7182955a53.jpg)
The STP cat. 6A flush-mounted socket is used for terminating cables routed e.g. from the distribution board.
• Category 6A
• Number of connectors: 2
• Connector type: RJ-45
• Number of connectors: 2
• Connector type: RJ-45
AXON ADSL Protector is designed to protect devices connected to an ADSL telecommunications line.
• Socket type: RJ-11
• Wire pairs protected: 3-4
• Dimensions: 66x60x30 mm
• Wire pairs protected: 3-4
• Dimensions: 66x60x30 mm
NetProtect computer network security is designed to protect devices connected to a 10/100 Mbps Ethernet network.
• Socket type: RJ-45
• Protected cable conductors: 1, 2, 3, 6
• Dimensions: 40x50x20 mm
• Protected cable conductors: 1, 2, 3, 6
• Dimensions: 40x50x20 mm
AXON AIR is designed to protect equipment connected to an Ethernet network connected to each other via a twisted pair running overhead line.
• Socket type: RJ-45
• Protected cable conductors: 1, 2, 3, 4, 5, 6, 7, 8
• Dimensions: 66x60x30 mm
• Protected cable conductors: 1, 2, 3, 4, 5, 6, 7, 8
• Dimensions: 66x60x30 mm
AXON NET is designed to provide surge protection for devices connected to the Ethernet network and powered via unused cable pairs.
• Socket type: RJ-45
• Protected cable conductors: 1, 2, 3, 4, 5, 6, 7, 8
• Dimensions: 66x60x30 mm
• PoE power supply
• Protected cable conductors: 1, 2, 3, 4, 5, 6, 7, 8
• Dimensions: 66x60x30 mm
• PoE power supply
AXON NetProtector is a multi-channel device designed to provide surge protection for devices connected to a 10/100/1000 Mbps Ethernet network.
• Socket type: RJ-45
• Number of tracks: 4
• Protected cable conductors: 1, 2, 3, 4, 5, 6, 7, 8
• Dimensions: 166x49x30 mm
• PoE power supply
• Number of tracks: 4
• Protected cable conductors: 1, 2, 3, 4, 5, 6, 7, 8
• Dimensions: 166x49x30 mm
• PoE power supply
A set of active converters for Ethernet and PoE transmission over coaxial cable, 1 channel 100 Mbps, PoE IN 802.3at/af or Passive (xCOAX3-SW), PoE OUT Passive up to 500 m.
• Transmission range via coaxial cable up to 500 m at 100 Mbps
• Interference immunity and watchdog function in COAX path
• Power supply from 802.3at/af PoE switch or PoE PASSIVE switch
• Power supply capability for 802.3at/af PoE or PoE PASSIVE receivers
up to 30 W total power across the entire power path
• Very low power consumption - 1.35 W total path
• Small module size
• Clear optical indication of power and data transmission status
• Easy and quick start-up without configuring parameters
• Interference immunity and watchdog function in COAX path
• Power supply from 802.3at/af PoE switch or PoE PASSIVE switch
• Power supply capability for 802.3at/af PoE or PoE PASSIVE receivers
up to 30 W total power across the entire power path
• Very low power consumption - 1.35 W total path
• Small module size
• Clear optical indication of power and data transmission status
• Easy and quick start-up without configuring parameters
The active converter kit allows Ethernet data and PoE power to be transmitted over a single pair of cables. Ideal when replacing cabling is not possible or cost-effective.
• Ethernet transmission over any 2 wires of cable
• Transmission of 100 Mbps up to 300 m and 10 Mbps up to 800 m (UTP cable)
• Power supply possible from PoE switch in 802.3af, 802.3at standard or PoE Passive (PoE IN port)
• Clear indication of operation, bandwidth and transmission status
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 1.35 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Transmission of 100 Mbps up to 300 m and 10 Mbps up to 800 m (UTP cable)
• Power supply possible from PoE switch in 802.3af, 802.3at standard or PoE Passive (PoE IN port)
• Clear indication of operation, bandwidth and transmission status
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 1.35 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
AXON PRO Video IP Protector 4 PoE+ is a four-channel surge protection device for CCTV systems.
• Socket type: RJ45
• Number of paths: 4
• Protected cable wires: 1,2,3,4,5,6,7,8
• Dimensions: 167x50x32 mm
• Pass-through for PoE supply
• Number of paths: 4
• Protected cable wires: 1,2,3,4,5,6,7,8
• Dimensions: 167x50x32 mm
• Pass-through for PoE supply
The devices of the AXON Multi Net Protector family are designed to protect devices connected to a 10/100/1000 Mb/s Ethernet network against impulse surges.
• 24 ports,
• UP line-to-line protection level ≤40V - 1kV/µs, C3
• UP line-to-ground protection level ≤600V - 1kV/µs, C3
• UP line-to-line protection level ≤40V - 1kV/µs, C3
• UP line-to-ground protection level ≤600V - 1kV/µs, C3
Crimping tool for Bell 8 pin plugs and modular plugs (telecommunications twisted pair).
• 8P8C (RJ-45) modular connector crimper
A compact Gigabit Ethernet-SFP converter with a wide supply voltage range of 12-58 V.
• 10/100/1000 autonegotiation on LAN port + PoE
• Power supply via screw connector (Vin) wide input voltage range
• Easy and quick commissioning without configuring parameters
• Very low power consumption (< 1.5 W)
• Small module size
• Power supply via screw connector (Vin) wide input voltage range
• Easy and quick commissioning without configuring parameters
• Very low power consumption (< 1.5 W)
• Small module size
Powering devices via PoE
1x PoE port, 1x LAN port
PoE 802.3af standard - max. power 15.4 W
• Powering devices via PoE
• 1x PoE port, 1x LAN port
• PoE 802.3af standard - max. power 15.4 W
• 1x PoE port, 1x LAN port
• PoE 802.3af standard - max. power 15.4 W
Gigabit PoE adapter with integrated voltage reduction converter. It enables devices with a nominal voltage of 12 V to be powered from a PoE 802.3af supply.
• Designed to work in 10/100/1000Mbps networks
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
Universal PoE adapter with integrated voltage-reducing adapter. Three different voltages can be obtained at the output: 5 V, 12 V or 24 V and PoE.
• Supports output voltages of 5 V, 12 V or 24 V via twisted pair
• Non-standard PoE configuration possible, e.g. 24 V PoE passive
• Power output up to 20 W
• High energy efficiency >90%
• Works in 10/100/1000 Mbps networks
• Full compatibility with 802.3af/at PoE switches
• Compact dimensions for installation in limited space (e.g. in the camera base, at the door station)
• Non-standard PoE configuration possible, e.g. 24 V PoE passive
• Power output up to 20 W
• High energy efficiency >90%
• Works in 10/100/1000 Mbps networks
• Full compatibility with 802.3af/at PoE switches
• Compact dimensions for installation in limited space (e.g. in the camera base, at the door station)
The device reduces the voltage on the DC plug to 12 V and simultaneously transfers PoE power to the RJ45 output.
• PoE voltage reduction from 48 V to 12 V – available at a DC plug (illuminator, microphone, heater)
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
The P-POE2 Splitter allows to connect two devices with a single UTP cat. 5e twisted pair cable.
• Transmits power and data to two PoE IP cameras
• Uses UTP cat. 5e twisted pair cable
• Designed to work in 10/100 Mbps networks
• Uses UTP cat. 5e twisted pair cable
• Designed to work in 10/100 Mbps networks
Gigabit PoE splitter with 12 V output, compliant with 802.3af/at/bt, ideal for powering devices with power consumption of up to 40 W.
• Large range of output power up to 40 W
• Power supply to 12 V DVR via PoE 802.3bt or ATTE switch
• Power supply from PoE switch (802.3af/at/bt) or passive PoE (44-56 V)
• High energy efficiency of over 90%
• Suitable for 10/100/1000 Mbps networks
• Compact dimensions for installation in small enclosures
• Power supply to 12 V DVR via PoE 802.3bt or ATTE switch
• Power supply from PoE switch (802.3af/at/bt) or passive PoE (44-56 V)
• High energy efficiency of over 90%
• Suitable for 10/100/1000 Mbps networks
• Compact dimensions for installation in small enclosures
Gigabit PoE adapter with voltage reduction converter. The device enables power conversion from PoE 802.3af or PoE Passive (35...56 V) to PoE Passive 24 V.
• Power WiFi APs requiring 24 V PoE from any PoE switch.
• Designed to work in 10/100/1000Mbps networks
• Easy to implement and install power backup for access points using IPUPS kits
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
• Designed to work in 10/100/1000Mbps networks
• Easy to implement and install power backup for access points using IPUPS kits
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
A device that enables the use of standard DC 12 V power in a PoE environment.
• Input: IEEE 802.3af / 802.3at PoE standards, DC input voltage 44-57 V.
• Output: DC 12 V output voltage, maximum current 2 A, maximum power 24 W, DC 5.5 × 2.1 mm connector
• 10/100 Mbps data transmission speed
• Galvanic separation of input and output via high-frequency isolation transformer
• Output: DC 12 V output voltage, maximum current 2 A, maximum power 24 W, DC 5.5 × 2.1 mm connector
• 10/100 Mbps data transmission speed
• Galvanic separation of input and output via high-frequency isolation transformer
Compact PoE extender designed to extend the range of Ethernet networks with PoE power supply. Hermetic housing.
• Compatible with IEEE 802.3af / 802.3at
• Maximum PoE output power 25.5 Watts.
• Transmission speed: 10/100 Mbps
• Cascadable for up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
• Maximum PoE output power 25.5 Watts.
• Transmission speed: 10/100 Mbps
• Cascadable for up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
Compact PoE extender with 2 output ports designed to extend the range of Ethernet networks with PoE power supply. Hermetic housing.
• Compatible with IEEE 802.3af / 802.3at
• Maximum PoE output power of 25.5 Watts to be shared between connected devices
• 2 outputs
• Cascadable up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
• Maximum PoE output power of 25.5 Watts to be shared between connected devices
• 2 outputs
• Cascadable up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
PoE extender with 2 output ports for extending the reach of Ethernet networks with PoE power supply. Splash-proof housing.
• Compatible with IEEE 802.3af / 802.3at
• Maximum PoE output power of 25.5 watts to be shared between connected devices
• 2 outputs
• Cascadable up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
• Maximum PoE output power of 25.5 watts to be shared between connected devices
• 2 outputs
• Cascadable up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
PoE extender with 4 output ports for extending the range of Ethernet networks with PoE power supply. Splash-proof housing.
• Compatible with IEEE 802.3af / 802.3at
• Maximum PoE output power of 25.5 watts to be shared between connected devices
• 4 outputs
• Cascadable up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
• Maximum PoE output power of 25.5 watts to be shared between connected devices
• 4 outputs
• Cascadable up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
The Power over Ethernet (PoE) adapter allows LAN devices to be powered via a 4-pair twisted pair cable (e.g. UTP).
• Fast Ethernet ports
The device allows 4 LAN devices to be powered via an Ethernet cable. The adapter is ideal for use with buffer power supplies.
The device allows 4 LAN devices to be powered via a twisted pair cable. The adapter is ideal for use with PoE devices.
• Four Gigabit Ethernet lanes
The device allows 8 LAN devices to be powered via a twisted pair cable. The adapter is ideal for use with PoE devices.
• Eight Gigabit Ethernet lanes
The MikroTik RBGPOE is a PoE adapter for powering RouterBOARDs via a Gigabit Ethernet port.
• Gigabit Ethernet port
• Power supply voltage - 18 - 57 VDC
• Output voltage - 18 - 57 VDC
• Power supply voltage - 18 - 57 VDC
• Output voltage - 18 - 57 VDC
Switch-mode power supply 24 V DC/1 A integrated in the PoE injector. For supplying e.g. the RouterBoard.
• 230 V AC / 24 V DC 1 A
The device lessens the risk of damage caused by surges in power lines to TV, stereo, computer or other electronic equipment.
• Number of sockets: 7
• Dimensions: 370x65x44 mm
• Rated load current (total): 10 A
• Dimensions: 370x65x44 mm
• Rated load current (total): 10 A
The ACAR P7 NET is an enhanced version of the P7 family, designed for demanding computer users.
• Number of sockets: 7
• Ethernet network security
• Dimensions: 370x65x44 mm
• Rated load current (total): 10 A
• Ethernet network security
• Dimensions: 370x65x44 mm
• Rated load current (total): 10 A
The device reduces the risk of damage to the computer, TV, radio caused by a power surge.
• Number of sockets: 8
• Dimensions: 445x54x55 mm
• Maximum total output current: 10 A
• Dimensions: 445x54x55 mm
• Maximum total output current: 10 A
The device reduces the risk of damage to the equipment caused by overvoltage in the mains. The Acar 504 WF has an anti-interference filter.
• Number of sockets: 5
• Anti-interference filter
• Dimensions: 385x59x55 mm
• Rated load current (total): 10 A
• Anti-interference filter
• Dimensions: 385x59x55 mm
• Rated load current (total): 10 A
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 0.25 m
• Cable type: U/UTP
• Category: 5e
• Colour: blue
• Cable type: U/UTP
• Category: 5e
• Colour: blue
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 0.25 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 0.25 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 0.25 m
• Cable type: U/UTP
• Category: 5e
• Colour: yellow
• Cable type: U/UTP
• Category: 5e
• Colour: yellow
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 0.25 m
• Color: yellow
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 0.25 m
• Color: yellow
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 0.25 m
• Cable type: U/UTP
• Category: 5e
• Colour: black
• Cable type: U/UTP
• Category: 5e
• Colour: black
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 0.25 m
• Color: black
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 0.25 m
• Color: black
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 0.5 m
• Cable type: U/UTP
• Category: 5e
• Colour: blue
• Cable type: U/UTP
• Category: 5e
• Colour: blue
![UTP patchcord [cat. 6A] slim 1 m white](https://www.dipol.com.pl/img/thumbnails/j2100100+.jpg/4d0998ad67ad7f6a354a77849d760a75.jpg)
Category 6A slim UTP patchcord 1 m long, white for use in Ethernet computer networks.
• Cable type: UTP cat. 6A (unshielded twisted pair)
• Slim construction
• Diameter: 2.8 mm
• Length: 1 m
• Colour: white
• Plugs: RJ45, factory-made
• Purpose: crossover connections in LAN networks, short distances between devices
• Slim construction
• Diameter: 2.8 mm
• Length: 1 m
• Colour: white
• Plugs: RJ45, factory-made
• Purpose: crossover connections in LAN networks, short distances between devices
![UTP patchcord [cat. 6A] slim 15 cm white](https://www.dipol.com.pl/img/thumbnails/j210015+.jpg/0e162a93b2d873c93d1b7b460146d471.jpg)
Category 6A slim UTP patchcord with a length of 15 cm in white, designed for use in Ethernet computer networks.
• Cable type: UTP cat. 6A (unshielded twisted pair)
• Slim design - smaller cable diameter for better cable management
• Length: 15 cm
• Colour: white
• Plugs: RJ45, factory-made
• Purpose: crossover connections in LAN networks, small sections between devices
• Diameter: 2.8 mm
• Slim design - smaller cable diameter for better cable management
• Length: 15 cm
• Colour: white
• Plugs: RJ45, factory-made
• Purpose: crossover connections in LAN networks, small sections between devices
• Diameter: 2.8 mm
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 0.5 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 0.5 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 0.5 m
• Cable type: U/UTP
• Category: 5e
• Colour: yellow
• Cable type: U/UTP
• Category: 5e
• Colour: yellow
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 0.5 m
• Colour: yellow
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 0.5 m
• Colour: yellow
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![UTP patchcord [cat. 6A] slim 30 cm white](https://www.dipol.com.pl/img/thumbnails/j210030+.jpg/615ec48646b9e1dc9396cb4e87a9e767.jpg)
Category 6A slim UTP patchcord with a length of 30 cm in white, designed for use in Ethernet computer networks.
• Cable type: UTP cat. 6A (unshielded twisted pair)
• Slim design - smaller cable diameter for better cable management
• Length: 30 cm
• Colour: white
• Plugs: RJ45, factory-made
• Purpose: crossover connections in LAN networks, small sections between devices
• Diameter: 2.8 mm
• Slim design - smaller cable diameter for better cable management
• Length: 30 cm
• Colour: white
• Plugs: RJ45, factory-made
• Purpose: crossover connections in LAN networks, small sections between devices
• Diameter: 2.8 mm
![UTP patchcord [cat. 6A] slim 50 cm white](https://www.dipol.com.pl/img/thumbnails/j210050+.jpg/da932f2ea0c31d814251b576baf91212.jpg)
Category 6A slim UTP patchcord 50 cm long in white for use in Ethernet computer networks.
• Cable type: UTP cat. 6A (unshielded twisted pair)
• Slim design - smaller cable diameter for better cable management
• Length: 50 cm
• Colour: white
• Plugs: RJ45, factory-made
• Purpose: crossover connections in LAN networks, small sections between devices
• Diameter: 2.8 mm
• Slim design - smaller cable diameter for better cable management
• Length: 50 cm
• Colour: white
• Plugs: RJ45, factory-made
• Purpose: crossover connections in LAN networks, small sections between devices
• Diameter: 2.8 mm
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 1 m
• Cable type: U/UTP
• Category: 5e
• Colour: blue
• Cable type: U/UTP
• Category: 5e
• Colour: blue
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 1 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 1 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 1 m
• Cable type: U/UTP
• Category: 5e
• Colour: yellow
• Cable type: U/UTP
• Category: 5e
• Colour: yellow
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 1 m
• Color: yellow
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 1 m
• Color: yellow
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 1 m
• Cable type: U/UTP
• Category: 5e
• Colour: red
• Cable type: U/UTP
• Category: 5e
• Colour: red
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 1 m
• Color: red
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 1 m
• Color: red
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 1 m
• Cable type: U/UTP
• Category: 5e
• Colour: black
• Cable type: U/UTP
• Category: 5e
• Colour: black
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 2 m
• Cable type: U/UTP
• Category: 5e
• Colour: blue
• Cable type: U/UTP
• Category: 5e
• Colour: blue
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 2 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 2 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 2 m
• Cable type: U/UTP
• Category: 5e
• Colour: yellow
• Cable type: U/UTP
• Category: 5e
• Colour: yellow
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 2 m
• Color: yellow
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 2 m
• Color: yellow
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 2 m
• Cable type: U/UTP
• Category: 5e
• Colour: red
• Cable type: U/UTP
• Category: 5e
• Colour: red
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 2 m
• Color: red
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 2 m
• Color: red
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![UTP patchcord [cat. 5e] 2 m black](https://www.dipol.com.pl/img/thumbnails/j21024+.jpg/cc2883b71cc190597db24b8152d53d1a.jpg)
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 2 m
• Cable type: U/UTP
• Category: 5e
• Colour: black
• Cable type: U/UTP
• Category: 5e
• Colour: black
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 3 m
• Cable type: U/UTP
• Category: 5e
• colour: blue
• Cable type: U/UTP
• Category: 5e
• colour: blue
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 3 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 3 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 3 m
• Cable type: U/UTP
• Category: 5e
• Colour: yellow
• Cable type: U/UTP
• Category: 5e
• Colour: yellow
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 3 m
• Color: yellow
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 3 m
• Color: yellow
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 3 m
• Cable type: U/UTP
• Category: 5e
• Colour: red
• Cable type: U/UTP
• Category: 5e
• Colour: red
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 3 m
• Color: red
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 3 m
• Color: red
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![UTP patchcord [cat. 5e] 3 m black](https://www.dipol.com.pl/img/thumbnails/j21034+.jpg/fbad82aa8b340367dbececf3c8eb336b.jpg)
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 3 m
• Cable type: U/UTP
• Category: 5e
• Colour: black
• Cable type: U/UTP
• Category: 5e
• Colour: black
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 5 m
• Cable type: U/UTP
• Category: 5e
• Colour: blue
• Cable type: U/UTP
• Category: 5e
• Colour: blue
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 5 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 5 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
This patch cable with RJ45 connectors (8P8C modular plugs) is mainly used for connecting computers and other devices to Ethernet networks LAN).
• Length: 5 m
• Cable type: U/UTP
• Category: 5e
• Colour: yellow
• Cable type: U/UTP
• Category: 5e
• Colour: yellow
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 5 m
• Color: yellow
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 5 m
• Color: yellow
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 5 m
• Cable type: U/UTP
• Category: 5e
• Colour: black
• Cable type: U/UTP
• Category: 5e
• Colour: black
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 10 m
• Cable type: U/UTP
• Category: 5e
• Colour: blue
• Cable type: U/UTP
• Category: 5e
• Colour: blue
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 10 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 10 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 15 m
• Cable type: U/UTP
• Category: 5e
• Colour: blue
• Cable type: U/UTP
• Category: 5e
• Colour: blue
NETSET's Category 5e UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 5e
• Length: 15 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 15 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patch cable with an RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 0.25 m
• Cable type: U/UTP
• Category: 6
• Color: blue
• Cable type: U/UTP
• Category: 6
• Color: blue
NETSET's Category 6 UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 0.25 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 0.25 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 0.5 m
• Cable type: U/UTP
• Category: 6
• Colour: blue
• Cable type: U/UTP
• Category: 6
• Colour: blue
NETSET's Category 6 UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 0.5 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 0.5 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 1 m
• Cable type: U/UTP
• Category: 6
• Colour: blue
• Cable type: U/UTP
• Category: 6
• Colour: blue
NETSET's Category 6 UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 1 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 1 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 2 m
• Cable type: U/UTP
• Category: 6
• Colour: blue
• Cable type: U/UTP
• Category: 6
• Colour: blue
NETSET's Category 6 UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 2 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 2 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 3 m
• Cable type: U/UTP
• Category: 6
• Colour: blue
• Cable type: U/UTP
• Category: 6
• Colour: blue
NETSET's Category 6 UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 3 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 3 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 5 m
• Cable type: U/UTP
• Category: 6
• Colour: blue
• Cable type: U/UTP
• Category: 6
• Colour: blue
NETSET's Category 6 UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 5 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 5 m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patch cable with an RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 10 m
• Cable type: U/UTP
• Category: 6
• Color: blue
• Cable type: U/UTP
• Category: 6
• Color: blue
NETSET's Category 6 UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 10m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 10m
• Color: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patch cable with an RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 15 m
• Cable type: U/UTP
• Category: 6
• Color: blue
• Cable type: U/UTP
• Category: 6
• Color: blue
NETSET's Category 6 UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 15 m
• Color: red
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 15 m
• Color: red
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![UTP patchcord [cat. 6] 20 m blue](https://www.dipol.com.pl/img/thumbnails/j21181+.jpg/3653973240345a59c5e2a6c3ba89140a.jpg)
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 20 m
• Cable type: U/UTP
• Category: 6
• Colour: blue
• Cable type: U/UTP
• Category: 6
• Colour: blue
This patch cable with RJ45 plugs is mainly used for connecting computers and other devices to Ethernet LAN networks.
• Length: 0.5 m
• Cable type: S/FTP
• Category: 6A
• Colour: blue
• Cable type: S/FTP
• Category: 6A
• Colour: blue
![NETSET S/FTP Patchcord [cat. 6A] 0.5 m blue](https://www.dipol.com.pl/img/thumbnails/j21201n+.jpg/bb12259ea06a55aad6b804b9457c4965.jpg)
NETSET's S/FTP Category 6A patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6A
• Length: 0.5 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 0.5 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
The patch cable with RJ45 plugs is mainly used for connecting computers and other devices to Ethernet LAN networks.
• Length: 1 m
• Cable type: S/FTP
• Category: 6A
• Colour: blue
• Cable type: S/FTP
• Category: 6A
• Colour: blue
![NETSET S/FTP Patchcord [cat. 6A] 1 m blue](https://www.dipol.com.pl/img/thumbnails/j21211n+.jpg/b046c6d2c89b9ad5fd0a875bf80aba96.jpg)
NETSET's S/FTP Category 6A patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6A
• Length: 1 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 1 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 plug is used to connect computers and other devices to Ethernet LAN networks.
• Length: 2 m
• Cable type: S/FTP
• Category: 6A
• Colour: blue
• Cable type: S/FTP
• Category: 6A
• Colour: blue
![NETSET S/FTP Patchcord [cat. 6A] 2 m blue](https://www.dipol.com.pl/img/thumbnails/j21221n+.jpg/e188ed57f37b00595feb7d68a103b9f5.jpg)
NETSET's S/FTP Category 6A patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6A
• Length: 2 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 2 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Length: 3 m
• Cable type: S/FTP
• Category: 6A
• Colour: blue
• Cable type: S/FTP
• Category: 6A
• Colour: blue
![NETSET S/FTP Patchcord [cat. 6A] 3 m blue](https://www.dipol.com.pl/img/thumbnails/j21231n+.jpg/e2ab0532cdc164f65844cd254e1a1997.jpg)
NETSET's S/FTP Category 6A patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6A
• Length: 3 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 3 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
The patch cable with RJ45 plugs is mainly used for connecting computers and other devices to Ethernet LAN networks.
• Length: 5 m
• Cable type: S/FTP
• Category: 6A
• Colour: blue
• Cable type: S/FTP
• Category: 6A
• Colour: blue
Patchcord with RJ-45 connector is used to connect computers and other devices to the LAN.
• Category: 6A
• Length: 5 m
• Shielded
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 5 m
• Shielded
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![NETSET S/FTP Patchcord [cat. 6A] 10 m blue](https://www.dipol.com.pl/img/thumbnails/j21261n+.jpg/cd568c453404086acc1b78630d3280a0.jpg)
NETSET's S/FTP Category 6A patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6A
• Length: 10 m
• Shielded
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Length: 10 m
• Shielded
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
![F/UTP patchcord [cat. 6] 0.5 m blue NETSET](https://www.dipol.com.pl/img/thumbnails/j21321n+.jpg/551ffe82942cd3491a10e4b0546dae7a.jpg)
NETSET's F/UTP Category 6 patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 0.5 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 0.5 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![Patchcord F/UTP [cat. 6] 1 m blue NETSET](https://www.dipol.com.pl/img/thumbnails/j21311n+.jpg/b3d79dc9b4d55257208f174a942b2e2f.jpg)
NETSET's F/UTP Category 6 patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 1 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 1 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
NETSET's F/UTP Category 6 patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 2 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 2 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![F/UTP patchcord [cat. 6] 3 m blue NETSET](https://www.dipol.com.pl/img/thumbnails/j21331n+.jpg/150a15e376c36b8375e0da7a375867b3.jpg)
NETSET's F/UTP Category 6 patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 3 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 3 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![F/UTP patchcord [cat. 6] 5 m blue NETSET](https://www.dipol.com.pl/img/thumbnails/j21351n+.jpg/bf39b5f90d7168b4af835f793d77b1ac.jpg)
NETSET's F/UTP Category 6 patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 3 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 3 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![Patchcord F/UTP [cat. 6] 10 m blue NETSET](https://www.dipol.com.pl/img/thumbnails/j21361n+.jpg/77513f4719750ffc3e43cf62eaa97176.jpg)
NETSET's F/UTP Category 6 patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 10 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 10 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
NETSET's Category 6A UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6A
• Length: 0.5 m
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 0.5 m
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
NETSET's Category 6A UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6A
• Length: 1 m
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 1 m
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![U/UTP patchcord [cat. 6A] 2 m blue NETSET](https://www.dipol.com.pl/img/thumbnails/j21421n+.jpg/7deccd212fd2f725c585bf46e238af25.jpg)
NETSET's Category 6A UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6A
• Length: 2 m
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 2 m
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![NETSET U/UTP patchcord [cat. 6A] 3 m blue](https://www.dipol.com.pl/img/thumbnails/j21431n+.jpg/6fab1b6f085b51710fe44b8f9d4f5b71.jpg)
NETSET's Category 6A UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6A
• Length: 3 m
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 3 m
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![Patchcord U/UTP [cat. 6A] 5 m blue NETSET](https://www.dipol.com.pl/img/thumbnails/j21451n+.jpg/0ed30cefdcc44ee71a1ca6fb3b8e4990.jpg)
NETSET's Category 6A UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6A
• Length: 5 m
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 5 m
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![Patchcord U/UTP [cat. 6A] 10 m blue NETSET](https://www.dipol.com.pl/img/thumbnails/j21100n+++.jpg/138c046cfde38059d66d7faf1a79e328.jpg)
NETSET's category 6A UTP patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6A
• Length: 10 m
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 10 m
• Colour: blue
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
High-quality cat. 6A 500 MHz network cable for the construction of high-bandwidth LAN installations. Supplied on a spool with a length of 60 metres.
• Category: 6A
• Operating band: 500 MHz
• Length: 60 m on reel
• Can be unreeled for temporary installations or permanent installation
• Ideal for LAN, IP monitoring, test and service networks
• Stable transmission in teletechnical environments
• Operating band: 500 MHz
• Length: 60 m on reel
• Can be unreeled for temporary installations or permanent installation
• Ideal for LAN, IP monitoring, test and service networks
• Stable transmission in teletechnical environments
