EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The device reduces the risk of damage to the equipment caused by overvoltage in the mains. The Acar 504 WF has an anti-interference filter.
• Number of sockets: 5
• Anti-interference filter
• Dimensions: 385x59x55 mm
• Rated load current (total): 10 A
• Anti-interference filter
• Dimensions: 385x59x55 mm
• Rated load current (total): 10 A
A set of active converters for Ethernet and PoE transmission over coaxial cable, 1 channel 100 Mbps, PoE IN 802.3at/af or Passive (xCOAX3-SW), PoE OUT Passive up to 500 m.
• Transmission range via coaxial cable up to 500 m at 100 Mbps
• Interference immunity and watchdog function in COAX path
• Power supply from 802.3at/af PoE switch or PoE PASSIVE switch
• Power supply capability for 802.3at/af PoE or PoE PASSIVE receivers
up to 30 W total power across the entire power path
• Very low power consumption - 1.35 W total path
• Small module size
• Clear optical indication of power and data transmission status
• Easy and quick start-up without configuring parameters
• Interference immunity and watchdog function in COAX path
• Power supply from 802.3at/af PoE switch or PoE PASSIVE switch
• Power supply capability for 802.3at/af PoE or PoE PASSIVE receivers
up to 30 W total power across the entire power path
• Very low power consumption - 1.35 W total path
• Small module size
• Clear optical indication of power and data transmission status
• Easy and quick start-up without configuring parameters
The active converter kit allows Ethernet data and PoE power to be transmitted over a single pair of cables. Ideal when replacing cabling is not possible or cost-effective.
• Ethernet transmission over any 2 wires of cable
• Transmission of 100 Mbps up to 300 m and 10 Mbps up to 800 m (UTP cable)
• Power supply possible from PoE switch in 802.3af, 802.3at standard or PoE Passive (PoE IN port)
• Clear indication of operation, bandwidth and transmission status
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 1.35 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Transmission of 100 Mbps up to 300 m and 10 Mbps up to 800 m (UTP cable)
• Power supply possible from PoE switch in 802.3af, 802.3at standard or PoE Passive (PoE IN port)
• Clear indication of operation, bandwidth and transmission status
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 1.35 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
A compact Gigabit Ethernet-SFP converter with a wide supply voltage range of 12-58 V.
• 10/100/1000 autonegotiation on LAN port + PoE
• Power supply via screw connector (Vin) wide input voltage range
• Easy and quick commissioning without configuring parameters
• Very low power consumption (< 1.5 W)
• Small module size
• Power supply via screw connector (Vin) wide input voltage range
• Easy and quick commissioning without configuring parameters
• Very low power consumption (< 1.5 W)
• Small module size
Powering devices via PoE
1x PoE port, 1x LAN port
PoE 802.3af standard - max. power 15.4 W
• Powering devices via PoE
• 1x PoE port, 1x LAN port
• PoE 802.3af standard - max. power 15.4 W
• 1x PoE port, 1x LAN port
• PoE 802.3af standard - max. power 15.4 W
Gigabit PoE adapter with integrated voltage reduction converter. It enables devices with a nominal voltage of 12 V to be powered from a PoE 802.3af supply.
• Designed to work in 10/100/1000Mbps networks
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
Universal PoE adapter with integrated voltage-reducing adapter. Three different voltages can be obtained at the output: 5 V, 12 V or 24 V and PoE.
• Supports output voltages of 5 V, 12 V or 24 V via twisted pair
• Non-standard PoE configuration possible, e.g. 24 V PoE passive
• Power output up to 20 W
• High energy efficiency >90%
• Works in 10/100/1000 Mbps networks
• Full compatibility with 802.3af/at PoE switches
• Compact dimensions for installation in limited space (e.g. in the camera base, at the door station)
• Non-standard PoE configuration possible, e.g. 24 V PoE passive
• Power output up to 20 W
• High energy efficiency >90%
• Works in 10/100/1000 Mbps networks
• Full compatibility with 802.3af/at PoE switches
• Compact dimensions for installation in limited space (e.g. in the camera base, at the door station)
The device reduces the voltage on the DC plug to 12 V and simultaneously transfers PoE power to the RJ45 output.
• PoE voltage reduction from 48 V to 12 V – available at a DC plug (illuminator, microphone, heater)
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
The P-POE2 Splitter allows you to connect two devices with a single UTP cat. 5e twisted pair cable.
• Transmits power and data to two PoE IP cameras
• Uses UTP cat. 5e twisted pair cable
• Designed to work in 10/100 Mbps networks
• Uses UTP cat. 5e twisted pair cable
• Designed to work in 10/100 Mbps networks
Gigabit PoE splitter with 12 V output, compliant with 802.3af/at/bt, ideal for powering devices with power consumption of up to 40 W.
• Large range of output power up to 40 W
• Power supply to 12 V DVR via PoE 802.3bt or ATTE switch
• Power supply from PoE switch (802.3af/at/bt) or passive PoE (44-56 V)
• High energy efficiency of over 90%
• Suitable for 10/100/1000 Mbps networks
• Compact dimensions for installation in small enclosures
• Power supply to 12 V DVR via PoE 802.3bt or ATTE switch
• Power supply from PoE switch (802.3af/at/bt) or passive PoE (44-56 V)
• High energy efficiency of over 90%
• Suitable for 10/100/1000 Mbps networks
• Compact dimensions for installation in small enclosures
