EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Kit for up to 5 IP cameras, in an ABOX-M2 outdoor housing, 96W power supply, 6-port 10/100Mbps PoE switch (5xPoE+1xUplink), electronic fuses, Long Range mode.
• Capable of powering 5 802.3at/af or PASSIVE PoE devices
• Data transmission over distances of up to 280 m in Long Range mode
• Independent electronic fuses for each PoE channel
• Automatic power restoration once a fault has been resolved
• Ability to disable power supply on selected PoE ports
• Optical indicators for power and data transmission status
• Up to 60 W power per LAN 5 PoE IN/OUT port
• Up to 40 W of power per remaining PoE port
• Operates in Standard and Long Range modes
• High efficiency of the power supply module: over 90%
• Modular design for easy servicing and expansion
• External housing with IP56 protection rating
• Cable glands: 6 × M16 and 1 × M20
• Modules can be mounted in a grid system
• No need to configure parameters during commissioning
• Data transmission over distances of up to 280 m in Long Range mode
• Independent electronic fuses for each PoE channel
• Automatic power restoration once a fault has been resolved
• Ability to disable power supply on selected PoE ports
• Optical indicators for power and data transmission status
• Up to 60 W power per LAN 5 PoE IN/OUT port
• Up to 40 W of power per remaining PoE port
• Operates in Standard and Long Range modes
• High efficiency of the power supply module: over 90%
• Modular design for easy servicing and expansion
• External housing with IP56 protection rating
• Cable glands: 6 × M16 and 1 × M20
• Modules can be mounted in a grid system
• No need to configure parameters during commissioning
PoE extender with 4 output ports for extending the range of Ethernet networks with PoE power supply. Splash-proof housing.
• Compatible with IEEE 802.3af / 802.3at
• Maximum PoE output power of 25.5 watts to be shared between connected devices
• 4 outputs
• Cascadable up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
• Maximum PoE output power of 25.5 watts to be shared between connected devices
• 4 outputs
• Cascadable up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
PoE extender with 2 output ports for extending the reach of Ethernet networks with PoE power supply. Splash-proof housing.
• Compatible with IEEE 802.3af / 802.3at
• Maximum PoE output power of 25.5 watts to be shared between connected devices
• 2 outputs
• Cascadable up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
• Maximum PoE output power of 25.5 watts to be shared between connected devices
• 2 outputs
• Cascadable up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
Compact PoE extender with 2 output ports designed to extend the range of Ethernet networks with PoE power supply. Hermetic housing.
• Compatible with IEEE 802.3af / 802.3at
• Maximum PoE output power of 25.5 Watts to be shared between connected devices
• 2 outputs
• Cascadable up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
• Maximum PoE output power of 25.5 Watts to be shared between connected devices
• 2 outputs
• Cascadable up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
Compact PoE extender designed to extend the range of Ethernet networks with PoE power supply. Hermetic housing.
• Compatible with IEEE 802.3af / 802.3at
• Maximum PoE output power 25.5 Watts.
• Transmission speed: 10/100 Mbps
• Cascadable for up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
• Maximum PoE output power 25.5 Watts.
• Transmission speed: 10/100 Mbps
• Cascadable for up to 3 devices
• LED indication: PWR, IN, OUT
• Hermetic, plastic casing for outdoor applications
A device that enables the use of standard DC 12 V power in a PoE environment.
• Input: IEEE 802.3af / 802.3at PoE standards, DC input voltage 44-57 V.
• Output: DC 12 V output voltage, maximum current 2 A, maximum power 24 W, DC 5.5 × 2.1 mm connector
• 10/100 Mbps data transmission speed
• Galvanic separation of input and output via high-frequency isolation transformer
• Output: DC 12 V output voltage, maximum current 2 A, maximum power 24 W, DC 5.5 × 2.1 mm connector
• 10/100 Mbps data transmission speed
• Galvanic separation of input and output via high-frequency isolation transformer
Gigabit PoE adapter with voltage reduction converter. The device enables power conversion from PoE 802.3af or PoE Passive (35...56 V) to PoE Passive 24 V.
• Power WiFi APs requiring 24 V PoE from any PoE switch.
• Designed to work in 10/100/1000Mbps networks
• Easy to implement and install power backup for access points using IPUPS kits
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
• Designed to work in 10/100/1000Mbps networks
• Easy to implement and install power backup for access points using IPUPS kits
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
Gigabit PoE adapter with integrated voltage reduction converter. It enables devices with a nominal voltage of 12 V to be powered from a PoE 802.3af supply.
• Designed to work in 10/100/1000Mbps networks
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
• Compatible with 802.3af PoE switches
• High energy efficiency >90%.
• Compatible with passive PoE power supplies 35-56 V
• Small module size
• Optimised RJ45 connector layout for easy installation in installation boxes
Universal PoE adapter with integrated voltage-reducing adapter. Three different voltages can be obtained at the output: 5 V, 12 V or 24 V and PoE.
• Supports output voltages of 5 V, 12 V or 24 V via twisted pair
• Non-standard PoE configuration possible, e.g. 24 V PoE passive
• Power output up to 20 W
• High energy efficiency >90%
• Works in 10/100/1000 Mbps networks
• Full compatibility with 802.3af/at PoE switches
• Compact dimensions for installation in limited space (e.g. in the camera base, at the door station)
• Non-standard PoE configuration possible, e.g. 24 V PoE passive
• Power output up to 20 W
• High energy efficiency >90%
• Works in 10/100/1000 Mbps networks
• Full compatibility with 802.3af/at PoE switches
• Compact dimensions for installation in limited space (e.g. in the camera base, at the door station)
PoE switch with integrated power supply in a DIN4 housing for mounting on a TH35 rail. It allows up to 3 IP PoE devices to be powered.
• Powers up to 3 PoE 802.3af/at/bt60 receivers
• Up to 120 W total power from the power supply
• High module efficiency >90%
• Redundant power supply (ensures power continuity through a second module)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and power consumption
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Up to 120 W total power from the power supply
• High module efficiency >90%
• Redundant power supply (ensures power continuity through a second module)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and power consumption
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
