In a way, many antennas protect the cooperating transceivers (APs, GSM repeaters) against atmospheric discharges. These antennas are DC short-circuited. However, it is not a sufficient solution in the case of a direct strike. A good solution is mounting the antenna on a mast/tower, the base of which...
• Protection of a GSM amplifier/repeater against lightning surges
• Max transmitted power: 200 W
• VSWR <1.1
• Insertion loss: 0.2 dB
Code: A6815

AXON ADSL Protector is designed to protect ADSL equipment connected to a telecommunications line. Its job is to limit overvoltages appearing in the line. It protects two wires, carrying excessive charges to the ground. The basic condition for an effective operation of the device is to connect the gr...
Code: J2810
Temporarily unavailable

During thunderstorms electronic devices are very vulnerable to damages. Risk of over-voltage is present even in spots 1.5 km distant from the place where where a lightning bolt strikes.
Code: J2830
Temporarily unavailable

AXON AIR NET Protector is designed for surge protection of devices connected to Ethernet 10/100/1000 Mb/s networks via an overhead UTP/FTP cable. AIR NET Protector should be used as the first level of protection when employing overhead transmission cables. The signal circuits are protected by elemen...
Code: J2835

AXON PoE Net Protector is designed for surge protection of devices connected to Ethernet 10/100 Mb/s networks and utilizing unused pairs of the UTP/FTP cable for power supply. The protector includes two protection circuits - for transmission lines (1-2, 3-6) and the power path (lines 4, 5, 7, 8). Th...
Code: J2836

AXON PoE Multi NetProtector is designed for surge protection of devices connected to Ethernet 10/100 Mb/s networks, such as network interface cards, hubs, switches, routers etc.
• Protection of LAN segment, including PoE solutions
• Protection of IP CCTV equipment
• Protection for all four paths (pairs)
• Threshold voltages adjusted to the function of a pair (data transmission or PoE)
• For 10/100 Mbps Ethernet networks
Code: J2837

NetProtector 4p PoE protects network devices from voltage surges, which can occur during electrical storms. It protects both the LAN and PoE ports. NetProtector 4p PoE can also be used as a conventional PoE adapter. The supplying voltage from an external power supply (connected to the 2.1/5.5 power ...
Code: J2838

AXON PRO Video IP Protector is four-channel surge protector of IP CCTV systems using Ethernet 10/100/1000 Mbps networks and PoE+ technology of remote power supply. The PoE+ technology allows for supplying power to devices with higher energy consumption, such as HD cameras.
• Socket type: RJ45
• Number of paths: 4
• Protected cable wires: 1,2,3,4,5,6,7,8
• Dimensions: 167x50x32 mm
• Pass-through for PoE supply
Code: J2845

The device lessens the risk of damage caused by surges in power lines to TV, stereo, computer or other electronic equipment.
Code: P1316

ACAR P7 NET is an extended version of P7 device family, designed for demanding users of computer equipment. It has 7 protected surge-protected AC power outlets (5 of them with ground contacts) and 2 protected RJ45 sockets for connecting network devices using LAN or Internet (router, computer, notebo...
Code: P1317