New items: CCTV/LAN testers

• A scratch-resistant, high-brightness 7" IPS touchscreen that can be used even in direct sunlight
• A high-capacity 57.72 Wh battery (11.1 V, 5200 mAh) providing up to approx. 11 hours of operation
• Seamless support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for controlling PTZ cameras (Pelco-P, Pelco-D and over 30 other protocols)
• Quick search and connection function for IP cameras (automatic subnet matching, option to configure camera parameters)
• Capable of simultaneously displaying footage from up to 32 cameras
• Capable of performing digital zoom (8x) on camera footage
• Ability to record video and capture still images from cameras to the built-in memory
• HDMI input and output – ability to display the image from the recorder and connect an external monitor
• Wi-Fi support (2.4 GHz)
• Physical function buttons
• Tester for video, audio, data, network, Wi-Fi and PoE signals
• TDR reflectometer (locates breaks in UTP cables)
• UTP cable tester
• Built-in internal memory: 8 GB, supports microSD cards up to 128 GB
• Built-in torch
• Power output: 2 x DC 12 V / 3 A, DC 24 V / 2 A, PoE (802.3af/at/bt90), DC 5 V / 2 A (USB)

• A scratch-resistant, high-brightness 5.4" IPS touchscreen that can be used even in direct sunlight
• A high-capacity 24.79 Wh battery (7.4 V, 3350 mAh) providing up to approx. 5 hours’ operation
• Seamless support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for controlling PTZ cameras (Pelco-P, Pelco-D and over 30 other protocols)
• Quick search and connection function for IP cameras (automatic subnet matching, option to configure camera parameters)
• Ability to display images from up to 32 cameras simultaneously
• Capability to digitally zoom in on camera images
• Capability to record video and capture still images from cameras (memory card required)
• HDMI and VGA signal inputs – capability to display images from the recorder
• Wi-Fi support (2.4 GHz)
• Touch-sensitive function buttons
• Signal tester for video, audio, data, network, Wi-Fi and PoE
• TDR reflectometer (locates breaks in UTP cables)
• UTP cable tester
• Supports microSD cards up to 128 GB
• Built-in torch
• Power output: DC 12 V / 3 A, PoE (802.3af/at)

• Digital cable location
• Support for UTP and STP cables
• RJ45 cable pin sequence test
• Open circuit detection
• Short circuit detection between wires
• Detection of incorrectly crossed wires
• RJ45 connector crimping check
• Cable length measurement using the TDR method
• Measurement of the length of individual pairs
• Switch or router port location
• 100 Mb/s / 1 Gb/s connection recognition
• PoE power diagnostics
• PoE voltage measurement
• Identification of pairs used for power supply
• Determination of power polarity
• Measurement of PoE power whilst under load
• Non-contact voltage detection (NCV)
• Distinguishing between live and neutral wires
• LED torch

• Set of 10 RJ45 terminators
• Identification markings 1–10
• Designed for use with the Signal NT-48 tester
• Enables identification of the terminus of the cable under test
• Compatible with the UTP cabling test function
• Can be used during the diagnosis of multiple network lines
• Useful for acceptance testing and servicing of structured cabling systems
• Quick identification of cables between the rack and end sockets
• Allows several terminators to be left at various points in the installation and subsequent tests to be carried out from a single location

• Measurement and visualisation of signal quality and strength NB-IoT, CAT-M, LTE cat.1, GSM
• Antenna connectors (2xSMA)
• Two SIM card slots

• 7" IPS touchscreen
• 15 physical function buttons
• Support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI, CVBS, SDI
• Built-in Wi-Fi module (2.4 GHz, 5.8 GHz)
• HDMI input and output
• High-capacity 37 Wh battery providing approx. 8 hours of operation
• Video, audio, data, network, Wi-Fi and PoE signal tester
• TDR reflectometer (locates breaks in UTP cables)
• Fibre optic tester: optical power meter (OPM) and VFL (visual fault locator)
• UTP cable tester
• Digital multimeter (measures voltage, current, resistance, capacitance)
• RS-485 data analysis
• Built-in internal memory: 11 GB, supports microSD cards up to 32 GB
• Built-in torch (1 LED – 35 lm)
• Power output: DC 12 V / 2 A, PoE (802.3af/at), DC 5 V / 2 A (USB)

• Number of terminators: 8
• Cable types tested: twisted pair cat. 5, 5e, 6, 7 (UTP/STP)
• Identification of specific twisted pair cable

• Tested cable types: CAT 5, 5e, 6, 7 twisted pair (UTP/STP), telephone, coaxial
• Cable length testing
• Function - "find port" quick port search on network devices
• Cable search and testing in PoE mode (passive PoE)
• Pair integrity test
• PoE wire voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Recording of measurement results in the device memory
• "Find port" function - quick port search in network devices
• PING test
• IP Scan
• Quick identification of the connected network port

• Cable types tested: UTP/STP cat. 5, 5e, 6, 7, telephone, coaxial
• Cable length measurement
• Measurement frequency: 130 kHz
• Measurement method: capacitive
• Maximum length: 2000 m
• Minimum length: 1 m
• "Find port" – quick search of the port in a network device
• Searching and testing cables in PoE mode (passive PoE)
• Pair integrity test
• Measuring voltages on individual conductors (POE)
• Transmitter voltage protection: 60 VAC / 48 VDC
• Auto-OFF function
• Battery discharge indicator
• Record of measurement results in the device memory
• Built-in visual fault locator (VFL) for optical cables
• Power: 9 V battery (included)

• LAN cable continuity testing
• UTP, FTP and telephone cables
• RJ45 and RJ11 connectors