MikroTik RB260GS is a 5-port gigabit switch for use in small computer networks. The switch is also equipped with SFP port. The device runs MikroTik SwOS.
Code: N24260
€36.42
Available

The Mercusys MS105G 5-port Gigabit switch finds widespread use in small computer networks. Its Auto MDI/MDIX function allows the installer to stop worrying about the problem of "straightforward" or "crossover" cables.
Code: N29941
€9.95
Temporarily unavailable

The Mercusys MS108G 8-port Gigabit switch finds widespread use in small computer networks. Its Auto MDI/MDIX function allows the installer to stop worrying about the problem of "straightforward" or "crossover" cables.
Code: N29944
€13.90
Temporarily unavailable

The ULTIPOWER 2216af PoE manageable switch ensures smooth connectivity in 10/100/1000 Mbps Ethernet networks. It has 19-inch rack-mountable housing, 16x RJ45 10/100 Mbps PoE ports, 2x RJ45 1000 Mbps ports and 2x SFP 1000 Mbps ports (COMBO mode). The 16 PoE ports automatically detect PD devices comp...
Code: N29986
€248.47
Available

The ULTIPOWER 2216af PoE manageable switch ensures smooth connectivity in 10/100/1000 Mbps Ethernet networks. It has 19-inch rack-mountable housing, 24x RJ45 10/100 Mbps PoE ports, 2x RJ45 1000 Mbps ports and 2x SFP 1000 Mbps ports (COMBO mode). The 24 PoE ports automatically detect PD devices comp...
• 24x RJ45 10/100 Mbps PoE ports
• Compliance with IEEE802.3af
• 2x RJ45 1000 Mbps ports
• 2x SFP 1000 Mbps ports
• Manageable switch supporting VLANs
Code: N29987
€361.45
€380.47
- 5%
Previous lowest price: €361.45
Available

The xPoE-4-11A-HS has been designed as LAN extender (repeater) and PoE power supply.
• Compact device size
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100Mbps switch)
• Up to 40W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5W)
Code: N29810
€49.18
Available

3-port PoE switch 10/100Mbps, extender (1xPoE IN 802.3at/af + 2xPoE OUT), PoE (max 40W), sequential start PoE OUT
• Miniature design for mounting in camera base
• Powered from another PoE switch supporting 802.3at, 802.3af or Passive standard (PoE IN port)
• Power up to 2 PoE receivers 802. 3at/af or Passive (PoE OUT ports)
• Cascade power supply (one switch powers another)
• Strengthens and distributes network signal (fully functional 100Mbps switch)
up to 40W total power
• Easy and fast startup without configuration of parameters
• Wide operating temperature range
• Very low power consumption (< 0.5 W)
• Sequential start of PoE outputs
Code: N29814
€49.18
Available

Switch for 5 IP cameras, in outdoor housing, 6-port 10/100Mbps (5xPoE + 1xUplink), PoE power supply on 4 pairs, integrated power supply 55V 90 W.
• Compact size
• Powering 5 PoE 802. 3at/af or PASSIVE receivers
• Power can be switched off on selected PoE ports
• Clear optical indication of power and data transmission status
• Up to 40 W power per single PoE port (total 90W power budget)
• Easy and fast startup without having to configure parameters
• High efficiency of integrated power supply (>90%)
• Additional screw connector makes it easy to pick up 55 VDC power to other devices
• Scalability by attaching additional switches of xPoE/IP series and IPB/IPUPS
• Supply of cables can be hidden inside the enclosure
• Cable exit through 2x29 mm rubber glands installed in the enclosure
• Cables with crimped plugs (after cutting the plugs) can be inserted
• Power cable and 2 brackets included for enclosure installation without compromising the IP55 protection degree
Code: N29815
€86.45
Available

The ULTIPOWER PoE switch is an industrial device enabling smooth data transmission in 10/100 Mbps Ethernet networks. Its five RJ45 ports support auto-negotiation function, four of them can provide power over Ethernet (PoE function). The switch automatically detects PD devices compliant with IEEE 802...
• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Total of five 10/100 Mbps ports
• Four PoE 802.3af/at ports
• Two SFP 100 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30...65℃
• Operating humidity range: 5%...95%
• Functions: Extend, VLAN, PoE Auto Check
• DIN rail mounting option
Code: N299701
€99.65
Available

The ULTIPOWER PoE switch is an industrial device enabling smooth data transmission in 10/100/1000 Mbps Ethernet networks.
• IP40 ingress protection level
• Input supply voltage: 48-57 VDC
• Possibility of connecting two power supplies (the main and redundant)
• Power consumption without PoE load: <5 W
• Ethernet ports: 8x FastEthernet 10/100 Mb/s (PoE), 1x GigabitEthernet 10/100/1000 Mb/s
• PoE ports: 6x 802.3at/af + 2x 802.3at/af HiPoE 90W
• Two SFP 1000 Mb/s ports
• ESD protection: 6 kV
• Operating temperature range: -30℃...65℃
• Operating humidity range: 5%...95%
• Functions: Extended, VLAN, PoE Auto Check
• DIN rail mounting option
Code: N299704
€227.76
Available