Universal tool to facilitate the implementation, configuration and maintenance of CCTV systems and computer networks.
• Scratch-resistant 7" IPS touchscreen display with high brightness for operation even in sunlight
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz, 5.8 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A
Code: M3214
- 20%
Previous lowest price: €424.47

The FORSCHER FS8114 device is used to test cabling continuity, measure cable lengths and distances to faults. It can detect connection faults in UTP/STP network cables, telephone and coaxial cables. In addition, the FS8114 tester is equipped with an advanced locator of wire pairs. The operation is b...
• Cable types tested: UTP/STP cat. 5, 5e, 6, 7, telephone, coaxial
• Cable length measurement
• Measurement frequency: 130 kHz
• Measurement method: capacitive
• Maximum length: 2000 m
• Minimum length: 1 m
• "Find port" – quick search of the port in a network device
• Searching and testing cables in PoE mode (passive PoE)
• Pair integrity test
• Measuring voltages on individual conductors (POE)
• Transmitter voltage protection: 60 VAC / 48 VDC
• Auto-OFF function
• Battery discharge indicator
• Record of measurement results in the device memory
• Built-in visual fault locator (VFL) for optical cables
• Power: 9 V battery (included)
Code: N7050

The FS8117 cable tester allows to test UTP/STP cables: cable quality, attenuation, length, distance to failure, short-circuit, improperly crimped connectors, Ping test, correct connection to the router, PoE voltage test, scan of active IPs in the network. Precision inductive probe – high power pair ...
• Cable types tested: Twisted Pair Cat. 5, 5e, 6, 7 (UTP/STP), telephone, coaxial
• Cable length testing
• ”Find port” function for quick search of ports in network devices
• Finding and testing cables in PoE mode (passive PoE)
• Pair integrity test
• PoE conductor voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Storage of measurement results in device memory
• PING test
• IP Scan
• Quick identification of connected network port
Code: N7051

Terminators enable detection and testing of 8 wires (ID2-ID9). They work with FORSCHER FS8117 N7051 meter.
• Number of terminators: 8
• Cable types tested: Twisted Pair Cat. 5, 5e, 6, 7 (UTP/STP)
• Identification of specific twisted pair cable
Code: N70511

The tester helps installers to build LAN or telephone systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The set consists of two parts - the master and remote part (terminator) - that are used at the opposite ends of the tested cable....
• Tests of LAN/phone cables continuity
• Suitable for UTP, FTP and phone cables
• RJ45 and RJ11 connectors
• Automatic or manual mode
Code: N7055