English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Side assembly component ZMB-1-800 R77105 is used for mounting devices vertically in a RACK cabinet with detachable side walls. The component is mounted to the front and rear RACK rail (on the left or right side of the cabinet). The component is suitable for mounting in standing 600 x 800 mm RACK cab...
The ZMC-1 R77210 component is a EURO TH35 rail with a length of 380 mm, receding by 100 mm in relation to the front of the RACK cabinet. The element is made of hard aluminum (PA11) sheet with 2 mm thickness.
• Allows to mount different types of equipment in RACK cabinet
• Front installation
• EURO TH35 rail included
• Dedicated for Terra channel DVB-T amplifiers
• Material: alluminium PA11
• Colour: black
• Front installation
• EURO TH35 rail included
• Dedicated for Terra channel DVB-T amplifiers
• Material: alluminium PA11
• Colour: black
The ZMC-2 R77220 component is used in a situation where, next to a few devices (length of the TH35 rail is 190 mm) mounted on the EURO rail, other devices should be mounted vertically. The component has a width of 180 mm and a height of 170 mm. It is made of hard PA11 aluminum sheet with a thickness...
Aside a short (190 mm) EURO rail, the ZMC-3 R77230 component of the RACK board vertical mounting system has a panel with 12 holes for keystone modules. This arrangement gives the possibility of better space management in the RACK cabinet when only few devices should be mounted on the EURO rail, wher...
The ZMC-4 R77240 component of the RACK board system has a 380x170 mm panel retracted by 100 mm from the front of the RACK cabinet. The panel is made of hard PA11 aluminum sheet with a thickness of 1.5 mm. Thanks to this, it has sufficient rigidity and at the same time aluminum allows for easy drilli...
Front assembly component ZMD-1 R77311 is composed of two elements. It has holes dedicated for mounting TERRA MR-xxx/MV-xxx multiswitches.
• For mounting series of Terra multiswitches of MR/MV series in RACK cabinets
• Front-mounted
• Made of PA11 aluminum
• Color: black
• Front-mounted
• Made of PA11 aluminum
• Color: black
Front assembly component ZMD-2 R77322 is composed of two elements. It is used to mount the devices in a RACK cabinet vertically, 100 mm behind the front 19" rails. This is a universal model. The holes needed to mount a device should be drilled according to needs. The set includes eight screws with c...
The ZMD-35 R77335 component is a EURO TH35 rail with length of 430 mm recessed by 100 mm from the front of the RACK cabinet. The component is made of hard PA11 aluminum sheet with thickness of 2 mm. The ZMD-35 can be loaded with evenly distributed devices with a total weight of 12 kg. The set includ...
The KWM-510 M5 x 10 set is used to mount a device to the ZMB-1-800 R77105, ZMC-2 R77220, ZMC-4 R77240, ZMD-1 R77311, or ZMD-2 R77322 assembly component. The ZMB-1-800 R77105 and ZMD-1 R77311 components include such sets.
