IP video-intercom systems are a perfect solution allowing voice and video communication with a person who wants to enter the property. Modern video-intercom systems allow local control via an installed monitor (indoor station) as well as remote control via a smartphone application. Such a system can be extended by a greater number of door stations or monitors. In the case of multi-subscriber solutions, an intercom function may be used, allowing free-of-charge communication between tenants using a shared door station.
The simplest video intercom system consists of a door station (outdoor station) and a monitor (indoor station). In order to supply power to the devices and ensure communication between them, PoE switches are used using a twisted-pair cable as the communication medium. In most cases an additional power supply is required to power the electric door strike. The systems allow for wicket and entrance gate control and integration with the CCTV system by adding the CCTV system cameras to the monitor or door station to the DVR for video recording. In the case of upgrading an existing intercom or video intercom system where cabling other than twisted pair already exists, the 2-Wire system can be used to provide the same functionality as an IP system.
The simplest video intercom system consists of a door station (outdoor station) and a monitor (indoor station). In order to supply power to the devices and ensure communication between them, PoE switches are used using a twisted-pair cable as the communication medium. In most cases an additional power supply is required to power the electric door strike. The systems allow for wicket and entrance gate control and integration with the CCTV system by adding the CCTV system cameras to the monitor or door station to the DVR for video recording. In the case of upgrading an existing intercom or video intercom system where cabling other than twisted pair already exists, the 2-Wire system can be used to provide the same functionality as an IP system.
The DS-KIS602(B) is a scalable is a IP Hivision video intercom kit.
• DS-KD8003-IME1(B) door/gate station main module
• DS-KD-ACW1 1-module surface-mounted housing
• DS-KH6320-WTE1 internal station (monitor)
• 4 x PoE DS-3E0105P-E/M switch
• 16 GB microSD card
• DS-KD-ACW1 1-module surface-mounted housing
• DS-KH6320-WTE1 internal station (monitor)
• 4 x PoE DS-3E0105P-E/M switch
• 16 GB microSD card
DS-KIS604-S(C) is a complete IP Villa 2 gen. Hikvision video intercom kit dedicated to Villa type systems.
• DS-KV8113-WME1(C)/Surface door/gate station main module
• DS-KH6320-WTE1 internal station
• 4 x PoE DS-3E0105P-E/M(B) switch
• microSD (16 GB) card
• DS-KH6320-WTE1 internal station
• 4 x PoE DS-3E0105P-E/M(B) switch
• microSD (16 GB) card
DS-KV9503-WBE1 is a 1-subscriber IP Villa door station with PIN, QR code, face and Mifare-enabled tag authentication.
• Door station: 1-subscriber with physical call button
• 4.3" LCD touchscreen display with 800 × 600 p resolution
• Two 2 MP (88° (H)/44° (V)) cameras
• Built-in speaker and microphone
• Built-in IR illuminator up to 3 m
• Virtual keypad for PIN code opening
• Built-in transponder reader in Mifare standard (13.56 MHz)
• Authorization by: face, code, card, QR code, bluetooth (reserved)
• 2 relay outputs for control (30 V, 2 A)
• 2 inputs for connecting exit buttons
• 2 inputs for connecting door contacts
• Supports up to 100k. tags, 20k users, 10k faces, 500 monitors, 16 slave stations
• WRD (120 dB)
• Support via iVMS-4200, browser, Hik-Connect
• Possible to add directly to Hik-Connect cloud
• Ethernet interface: 1 × RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Surface mounting
• Compatible with 2nd gen IP video door entry system.
• Protection degree: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
• 4.3" LCD touchscreen display with 800 × 600 p resolution
• Two 2 MP (88° (H)/44° (V)) cameras
• Built-in speaker and microphone
• Built-in IR illuminator up to 3 m
• Virtual keypad for PIN code opening
• Built-in transponder reader in Mifare standard (13.56 MHz)
• Authorization by: face, code, card, QR code, bluetooth (reserved)
• 2 relay outputs for control (30 V, 2 A)
• 2 inputs for connecting exit buttons
• 2 inputs for connecting door contacts
• Supports up to 100k. tags, 20k users, 10k faces, 500 monitors, 16 slave stations
• WRD (120 dB)
• Support via iVMS-4200, browser, Hik-Connect
• Possible to add directly to Hik-Connect cloud
• Ethernet interface: 1 × RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Surface mounting
• Compatible with 2nd gen IP video door entry system.
• Protection degree: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
DS-KB8113-IME1 is a 1-subscriber door station for Hikvision's 2nd generation IP video door entry system in vandal-proof design with IK09 protection.
• Vandal-proof design
• 1-subscriber door station
• 2 MP color camera (88° (H)/45° (V))
• Built-in speaker and microphone
• Infrared IR illuminator with up to 3m range
• 1 alarm input
• 1 relay output for control (NO/NC)
• Image functions: BLC, WRD
• H.264 compression
• Motion detection
• Surface mounted
• Up to 16 slave door stations in basic mode
• Ringing schedules possible
• Operated via iVMS-4200, browser, Hik-Connect app
• Possibility to add directly to Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T
• Protection degree: IP65, IK09
• 12 VDC or PoE (802.3 af) power supply
• 1-subscriber door station
• 2 MP color camera (88° (H)/45° (V))
• Built-in speaker and microphone
• Infrared IR illuminator with up to 3m range
• 1 alarm input
• 1 relay output for control (NO/NC)
• Image functions: BLC, WRD
• H.264 compression
• Motion detection
• Surface mounted
• Up to 16 slave door stations in basic mode
• Ringing schedules possible
• Operated via iVMS-4200, browser, Hik-Connect app
• Possibility to add directly to Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T
• Protection degree: IP65, IK09
• 12 VDC or PoE (802.3 af) power supply
DS-KV6113-WPE1(C) is a 1-subscriber door/gate station dedicated for 2nd generation Hikvision IP video intercom systems.
• 1-subscriber door/gate station
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (131° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 1 relay control output (NO/NC)
• Image functions: BLC, DNR, WRD
• Compression H.264
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave door/gate stations can be added in the basic mode
• Possibility to create calling schedules
• Controlled by iVMS-4200, web browser, Hik-Connect
• Possibility to add directly to the Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65
• 12 VDC or PoE (802.3 af) power supply
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (131° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 1 relay control output (NO/NC)
• Image functions: BLC, DNR, WRD
• Compression H.264
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave door/gate stations can be added in the basic mode
• Possibility to create calling schedules
• Controlled by iVMS-4200, web browser, Hik-Connect
• Possibility to add directly to the Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65
• 12 VDC or PoE (802.3 af) power supply
DS-KV8113-WME1(C)/Surface is a 1-subscriber door/gate station dedicated for 2nd generation Hikvision IP video intercom systems.
• 1-subscriber door/gate station
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (124° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 1 button and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression,
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave door/gate stations can be added in the basic mode
• Possibility to create calling schedules
• Operated via iVMS-4200, web browsers, Hik-Connect
• Possibility to add directly to the Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (124° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 1 button and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression,
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave door/gate stations can be added in the basic mode
• Possibility to create calling schedules
• Operated via iVMS-4200, web browsers, Hik-Connect
• Possibility to add directly to the Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
DS-KV8213-WME1(C)/Surface is a 2-subscriber door/gate station dedicated for 2nd generation Hikvision IP video intercom systems.
• 2-subscriber door/gate station
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (129° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 2 buttons and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression,
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave stations can be added in basic mode
• Calling schedules can be created
• Control with iVMS-4200, browser Hik-Connect (monitor required for P2P)
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (129° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 2 buttons and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression,
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave stations can be added in basic mode
• Calling schedules can be created
• Control with iVMS-4200, browser Hik-Connect (monitor required for P2P)
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
DS-KV8413-WME1(C)/Surface is a 4-subscriber door/gate station dedicated for 2nd generation Hikvision IP video intercom systems.
• 4-subscriber door/gate station
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (124° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 4 buttons and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression,
• 4 alarm inputs
• Motion detection
• Surface mounted
• Remote control with Hik-Connect software (video intercom monitor required)
• Operated via iVMS-4200 and web browser
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (124° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 4 buttons and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression,
• 4 alarm inputs
• Motion detection
• Surface mounted
• Remote control with Hik-Connect software (video intercom monitor required)
• Operated via iVMS-4200 and web browser
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
DS-KD8003-IME1(B) is the main module of the second generation Hikvision IP video intercom.
• Fisheye color camera: 2 MP (146° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 relay outputs for control (30 V, 2 A)
• Built-in nameplate holder with 1 button and LED backlight
• 4 alarm inputs
• Image functions: BLC, DNR, WRD
• Compatible with DS-KD-XXX series frames
• Maximum expansion up to 8 modules
• Supports up to 6,000 tags, 500 monitors, 16 slave stations, 8 extensions for doorphone stations, 2,000 users
• Remote operation via Hik-Connect app (video door monitor required)
• Output to electric door strike power supply: DC 12 V / 0.5 A
• Configuration via iVMS-4200
• Power supply DC 12V or PoE (802.3 af).
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 relay outputs for control (30 V, 2 A)
• Built-in nameplate holder with 1 button and LED backlight
• 4 alarm inputs
• Image functions: BLC, DNR, WRD
• Compatible with DS-KD-XXX series frames
• Maximum expansion up to 8 modules
• Supports up to 6,000 tags, 500 monitors, 16 slave stations, 8 extensions for doorphone stations, 2,000 users
• Remote operation via Hik-Connect app (video door monitor required)
• Output to electric door strike power supply: DC 12 V / 0.5 A
• Configuration via iVMS-4200
• Power supply DC 12V or PoE (802.3 af).
DS-KD-E is a card reader module working in the EM 125 kHz standard, designed to work with the second generation Hikvision IP video intercom system.