IP video-intercom systems are a perfect solution allowing voice and video communication with a person who wants to enter the property. Modern video-intercom systems allow local control via an installed monitor (indoor station) as well as remote control via a smartphone application. Such a system can be extended by a greater number of door stations or monitors. In the case of multi-subscriber solutions, an intercom function may be used, allowing free-of-charge communication between tenants using a shared door station.
The simplest video intercom system consists of a door station (outdoor station) and a monitor (indoor station). In order to supply power to the devices and ensure communication between them, PoE switches are used using a twisted-pair cable as the communication medium. In most cases an additional power supply is required to power the electric door strike. The systems allow for wicket and entrance gate control and integration with the CCTV system by adding the CCTV system cameras to the monitor or door station to the DVR for video recording. In the case of upgrading an existing intercom or video intercom system where cabling other than twisted pair already exists, the 2-Wire system can be used to provide the same functionality as an IP system.
The simplest video intercom system consists of a door station (outdoor station) and a monitor (indoor station). In order to supply power to the devices and ensure communication between them, PoE switches are used using a twisted-pair cable as the communication medium. In most cases an additional power supply is required to power the electric door strike. The systems allow for wicket and entrance gate control and integration with the CCTV system by adding the CCTV system cameras to the monitor or door station to the DVR for video recording. In the case of upgrading an existing intercom or video intercom system where cabling other than twisted pair already exists, the 2-Wire system can be used to provide the same functionality as an IP system.
The BIRA HARTTE XS12UP XS-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 V AC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Memory
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Memory
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
The BIRA HARTTE XS12R XS-series reversible electric door strike is used for remote wired opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 VDC
• NO (normally open)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left- and right-hand doors
• Steel strike, adjustable up to 3.5 mm
• Reversible
• Symmetrical design
• Voltage tolerance: 10-14 V
• Current consumption AC/DC: 480/680 mA
• NO (normally open)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left- and right-hand doors
• Steel strike, adjustable up to 3.5 mm
• Reversible
• Symmetrical design
• Voltage tolerance: 10-14 V
• Current consumption AC/DC: 480/680 mA
The HARTTE XS12R-C XS-C series electric door strike is used for remote wired opening of doors.
• Powered by 12 V/DC
• NO operating (normally open) mode
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - 200,000 opening cycles
• For left and right doors
• ZnAl strike with up to 3.5 mm adjustment
• Reversible
• Slip
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• DC current drawn: 200 mA
• NO operating (normally open) mode
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - 200,000 opening cycles
• For left and right doors
• ZnAl strike with up to 3.5 mm adjustment
• Reversible
• Slip
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• DC current drawn: 200 mA
The BIRA HARTTE XS00U XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UP XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Internal memory
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Internal memory
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UW XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Switch
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Switch
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UPW XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Switch
• Internal memory
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Switch
• Internal memory
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00U-C XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Slip
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Slip
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UW-C XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Slip option
• Switch
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Slip option
• Switch
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UM XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Monitoring
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Monitoring
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
