English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
IP video-intercom systems are a perfect solution allowing voice and video communication with a person who wants to enter the property. Modern video-intercom systems allow local control via an installed monitor (indoor station) as well as remote control via a smartphone application. Such a system can be extended by a greater number of door stations or monitors. In the case of multi-subscriber solutions, an intercom function may be used, allowing free-of-charge communication between tenants using a shared door station.
The simplest video intercom system consists of a door station (outdoor station) and a monitor (indoor station). In order to supply power to the devices and ensure communication between them, PoE switches are used using a twisted-pair cable as the communication medium. In most cases an additional power supply is required to power the electric door strike. The systems allow for wicket and entrance gate control and integration with the CCTV system by adding the CCTV system cameras to the monitor or door station to the DVR for video recording. In the case of upgrading an existing intercom or video intercom system where cabling other than twisted pair already exists, the 2-Wire system can be used to provide the same functionality as an IP system.
The simplest video intercom system consists of a door station (outdoor station) and a monitor (indoor station). In order to supply power to the devices and ensure communication between them, PoE switches are used using a twisted-pair cable as the communication medium. In most cases an additional power supply is required to power the electric door strike. The systems allow for wicket and entrance gate control and integration with the CCTV system by adding the CCTV system cameras to the monitor or door station to the DVR for video recording. In the case of upgrading an existing intercom or video intercom system where cabling other than twisted pair already exists, the 2-Wire system can be used to provide the same functionality as an IP system.
DS-KD-ACF1 is a set for flush mounting, dedicated to the second generation Hikvision IP video intercom system.
DS-KAD706Y is an audio, video and power distributor dedicated to work with Hikvision 2nd generation video door entry system in 2-wire system.
• Audio, video and power distributor for Hikvision 2nd generation 2-wire video door entry system
• 6 x 2-Wire interface (CH1-CH6 power supply for monitors, including CH6 power supply for door station)
• 2 x 2-Wire interface (cascade communication using DS-KAD706Y-S)
• 1 x RJ-45 10/100 Base-T (LAN connection)
• 24 VDC power supply (no power supply included)
• 6 x 2-Wire interface (CH1-CH6 power supply for monitors, including CH6 power supply for door station)
• 2 x 2-Wire interface (cascade communication using DS-KAD706Y-S)
• 1 x RJ-45 10/100 Base-T (LAN connection)
• 24 VDC power supply (no power supply included)
DS-KD8003Y-IME2 is a Hikvision door station main module, part of the 2-Wire HD system (EY series).
• Compatible with EY series
• Possibility to install 0, 1 or 2 call buttons in main module
• Maximum expansion up to 8 modules
• Fisheye color camera: 2 MP (133° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 control outputs (1 x pulse 20 V/4 A, 1 x relay NO/NC 30 V/DC)
• 2 alarm inputs (exit button or reed switch)
• Image functions: WRD
• Support for up to 2000 users, 99 monitors, 16 slave stations
• Compatible with DS-KD-xxx series modules and DS-KD-ACFx and DS-KD-ACWx enclosures
• Power and communication via 2-Wire bus
• Capable of 12 VDC power
• Wifi interface (AP mode configuration only)
• Plug & Play connection (configuration on switches)
• Protection rating: IP65, IK08
• Possibility to install 0, 1 or 2 call buttons in main module
• Maximum expansion up to 8 modules
• Fisheye color camera: 2 MP (133° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 control outputs (1 x pulse 20 V/4 A, 1 x relay NO/NC 30 V/DC)
• 2 alarm inputs (exit button or reed switch)
• Image functions: WRD
• Support for up to 2000 users, 99 monitors, 16 slave stations
• Compatible with DS-KD-xxx series modules and DS-KD-ACFx and DS-KD-ACWx enclosures
• Power and communication via 2-Wire bus
• Capable of 12 VDC power
• Wifi interface (AP mode configuration only)
• Plug & Play connection (configuration on switches)
• Protection rating: IP65, IK08
The DS-KAD7060EY is an audio, video and power distributor designed for use with Hikvision's EY series 2-Wire HD video door entry system.
• Audio, video and power distributor for Hikvision 2-Wire HD system
• 6 x interface with 2-Wire power supply
• 2 x 2-Wire interface (DS-KAD7060EY or DS-KAD7060EY-S)
• Maximum power for each of the CH1 and CH2 ports: up to 15 W
• Power budget for CH3 + CH4 + Ch5 + CH6 ports: up to 110 W
• DIN rail mounting
• Power supply 48 VDC (no power supply included)
• 6 x interface with 2-Wire power supply
• 2 x 2-Wire interface (DS-KAD7060EY or DS-KAD7060EY-S)
• Maximum power for each of the CH1 and CH2 ports: up to 15 W
• Power budget for CH3 + CH4 + Ch5 + CH6 ports: up to 110 W
• DIN rail mounting
• Power supply 48 VDC (no power supply included)
The DS-KAD7061EY is a floor distributor designed to work with Hikvision's EY series 2-Wire HD video door entry system.
• Floor distributor for 2-Wire HD system
• 4 x 2-Wire interface for monitor connection
• 2 x 2-Wire interfaces for cascade connection
• 6 status indicators for 2-Wire interfaces
• No local power supply required (2-Wire bus power supply)
• 4 x 2-Wire interface for monitor connection
• 2 x 2-Wire interfaces for cascade connection
• 6 status indicators for 2-Wire interfaces
• No local power supply required (2-Wire bus power supply)
The DS-KABD8003-RS2 is a rain shield dedicated for surface mounting of the modular door/gate station of the second generation IP and 2-Wire Hikvision video intercom.
• Rain shield IP, 2-Wire Hikvision video intercom
• Dedicated for surface mounting of the 2-module housing
• Dedicated for surface mounting of the 2-module housing
Rain shield: Hikvision DS-KABV6113-RS/Surface for DS-KV6113-PE1 and DS-KV6113-WPE1 door/gate station
The DS-KABV8113-RS/Surface is a rain shield (housing) dedicated for surface mounting of the KV6103/6113 IP Villa 2 gen. door/gate stations.
• Rain shield for Villa 2 gen. surface-mounted door/gate stations
• Compatibility: DS-KV6113-PE1 and DS-KV6113-WPE1
• Material: plastic
• Compatibility: DS-KV6113-PE1 and DS-KV6113-WPE1
• Material: plastic
The DS-KABV8113-RS/Flush is a rain shield (housing) dedicated for flush mounting of the DS-KV8X13-WME1 IP Villa 2 gen. door/gate stations.
• Rain shield for Villa 2 gen. flush mounted door/gate stations
• Compatibility: DS-KV8X13-WME1 flush mounted
• Material: steel
• Compatibility: DS-KV8X13-WME1 flush mounted
• Material: steel
DS-KV9503-WBE1 is a 1-subscriber IP Villa door station with PIN, QR code, face and Mifare-enabled tag authentication.
• Door station: 1-subscriber with physical call button
• 4.3" LCD touchscreen display with 800 × 600 p resolution
• Two 2 MP (88° (H)/44° (V)) cameras
• Built-in speaker and microphone
• Built-in IR illuminator up to 3 m
• Virtual keypad for PIN code opening
• Built-in transponder reader in Mifare standard (13.56 MHz)
• Authorization by: face, code, card, QR code, bluetooth (reserved)
• 2 relay outputs for control (30 V, 2 A)
• 2 inputs for connecting exit buttons
• 2 inputs for connecting door contacts
• Supports up to 100k. tags, 20k users, 10k faces, 500 monitors, 16 slave stations
• WRD (120 dB)
• Support via iVMS-4200, browser, Hik-Connect
• Possible to add directly to Hik-Connect cloud
• Ethernet interface: 1 × RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Surface mounting
• Compatible with 2nd gen IP video door entry system.
• Protection degree: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
• 4.3" LCD touchscreen display with 800 × 600 p resolution
• Two 2 MP (88° (H)/44° (V)) cameras
• Built-in speaker and microphone
• Built-in IR illuminator up to 3 m
• Virtual keypad for PIN code opening
• Built-in transponder reader in Mifare standard (13.56 MHz)
• Authorization by: face, code, card, QR code, bluetooth (reserved)
• 2 relay outputs for control (30 V, 2 A)
• 2 inputs for connecting exit buttons
• 2 inputs for connecting door contacts
• Supports up to 100k. tags, 20k users, 10k faces, 500 monitors, 16 slave stations
• WRD (120 dB)
• Support via iVMS-4200, browser, Hik-Connect
• Possible to add directly to Hik-Connect cloud
• Ethernet interface: 1 × RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Surface mounting
• Compatible with 2nd gen IP video door entry system.
• Protection degree: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
DS-KD-KP is a numeric keypad module designed for second generation Hikvision IP video intercom systems.
