EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
IP video-intercom systems are a perfect solution allowing voice and video communication with a person who wants to enter the property. Modern video-intercom systems allow local control via an installed monitor (indoor station) as well as remote control via a smartphone application. Such a system can be extended by a greater number of door stations or monitors. In the case of multi-subscriber solutions, an intercom function may be used, allowing free-of-charge communication between tenants using a shared door station.
The simplest video intercom system consists of a door station (outdoor station) and a monitor (indoor station). In order to supply power to the devices and ensure communication between them, PoE switches are used using a twisted-pair cable as the communication medium. In most cases an additional power supply is required to power the electric door strike. The systems allow for wicket and entrance gate control and integration with the CCTV system by adding the CCTV system cameras to the monitor or door station to the DVR for video recording. In the case of upgrading an existing intercom or video intercom system where cabling other than twisted pair already exists, the 2-Wire system can be used to provide the same functionality as an IP system.
The simplest video intercom system consists of a door station (outdoor station) and a monitor (indoor station). In order to supply power to the devices and ensure communication between them, PoE switches are used using a twisted-pair cable as the communication medium. In most cases an additional power supply is required to power the electric door strike. The systems allow for wicket and entrance gate control and integration with the CCTV system by adding the CCTV system cameras to the monitor or door station to the DVR for video recording. In the case of upgrading an existing intercom or video intercom system where cabling other than twisted pair already exists, the 2-Wire system can be used to provide the same functionality as an IP system.
The DS-KIS602(B) is a complete Hikvision IP video intercom kit that can form the basis for further expansion.
• DS-KD8003-IME1(B) door/gate station main module
• DS-KD-ACW1 1-module surface-mounted housing
• DS-KH6320-WTE1 internal station (monitor)
• 4 x PoE DS-3E0105P-E/M switch
• 16 GB microSD card
• DS-KD-ACW1 1-module surface-mounted housing
• DS-KH6320-WTE1 internal station (monitor)
• 4 x PoE DS-3E0105P-E/M switch
• 16 GB microSD card
DS-KIS604-S(C) is a complete IP Villa 2 gen. Hikvision video intercom kit dedicated to Villa type systems.
• DS-KV8113-WME1(C)/Surface door/gate station main module
• DS-KH6320-WTE1 internal station
• 4 x PoE DS-3E0105P-E/M(B) switch
• MicroSD (16 GB) card
• DS-KH6320-WTE1 internal station
• 4 x PoE DS-3E0105P-E/M(B) switch
• MicroSD (16 GB) card
DS-KV9503-WBE1 is a 1-subscriber IP Villa door station with PIN, QR code, face and Mifare-enabled tag authentication.
• Door station: 1-subscriber with physical call button
• 4.3" LCD touchscreen display with 800 × 600 p resolution
• Two 2 MP (88° (H)/44° (V)) cameras
• Built-in speaker and microphone
• Built-in IR illuminator up to 3 m
• Virtual keypad for PIN code opening
• Built-in transponder reader in Mifare standard (13.56 MHz)
• Authorization by: face, code, card, QR code, bluetooth (reserved)
• 2 relay outputs for control (30 V, 2 A)
• 2 inputs for connecting exit buttons
• 2 inputs for connecting door contacts
• Supports up to 100 k. tags, 20k users, 10k faces, 500 monitors, 16 slave stations
• WRD (120 dB)
• Support via iVMS-4200, browser, Hik-Connect
• Possible to add directly to Hik-Connect cloud
• Ethernet interface: 1 × RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Surface mounting
• Compatible with 2nd gen IP video door entry system
• Protection degree: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
• 4.3" LCD touchscreen display with 800 × 600 p resolution
• Two 2 MP (88° (H)/44° (V)) cameras
• Built-in speaker and microphone
• Built-in IR illuminator up to 3 m
• Virtual keypad for PIN code opening
• Built-in transponder reader in Mifare standard (13.56 MHz)
• Authorization by: face, code, card, QR code, bluetooth (reserved)
• 2 relay outputs for control (30 V, 2 A)
• 2 inputs for connecting exit buttons
• 2 inputs for connecting door contacts
• Supports up to 100 k. tags, 20k users, 10k faces, 500 monitors, 16 slave stations
• WRD (120 dB)
• Support via iVMS-4200, browser, Hik-Connect
• Possible to add directly to Hik-Connect cloud
• Ethernet interface: 1 × RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Surface mounting
• Compatible with 2nd gen IP video door entry system
• Protection degree: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
DS-KB8113-IME1 is a 1-subscriber door station for Hikvision's 2nd generation IP video door entry system in vandal-proof design with IK09 protection.
• Vandal-proof design
• 1-subscriber door station
• 2 MP color camera (88° (H)/45° (V))
• Built-in speaker and microphone
• Infrared IR illuminator with up to 3m range
• 1 alarm input
• 1 relay output for control (NO/NC)
• Image functions: BLC, WRD
• H.264 compression
• Motion detection
• Surface mounted
• Up to 16 slave door stations in basic mode
• Ringing schedules possible
• Operated via iVMS-4200, browser, Hik-Connect app
• Possibility to add directly to Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T
• Protection degree: IP65, IK09
• 12 VDC or PoE (802.3 af) power supply
• 1-subscriber door station
• 2 MP color camera (88° (H)/45° (V))
• Built-in speaker and microphone
• Infrared IR illuminator with up to 3m range
• 1 alarm input
• 1 relay output for control (NO/NC)
• Image functions: BLC, WRD
• H.264 compression
• Motion detection
• Surface mounted
• Up to 16 slave door stations in basic mode
• Ringing schedules possible
• Operated via iVMS-4200, browser, Hik-Connect app
• Possibility to add directly to Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T
• Protection degree: IP65, IK09
• 12 VDC or PoE (802.3 af) power supply
DS-KV6133-WME1 is a 1-subscriber door/gate station dedicated for 2nd generation Hikvision IP video intercom systems.
• 1-subscriber door station
• Built-in Mifare transponder reader (13.56 MHz)
• 2 MP color camera (129° (H)/75° (V))
• Built-in speaker and microphone
• IR illuminator with 2.5 m range
• 1 relay control outputs (NO/NC)
• Image functions: BLC, DNR, WRD
• H.264 video compression
• 4 alarm inputs
• Surface mounting
• Up to 16 sub-door stations can be added in basic mode
• Creation of calling schedules possible
• Operation via iVMS-4200, browser, Hik-Connect
• Direct addition to the Hik-Connect Cloud possible
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection degree: IP65
• 12 VDC power supply or PoE (802.3 af)
• Built-in Mifare transponder reader (13.56 MHz)
• 2 MP color camera (129° (H)/75° (V))
• Built-in speaker and microphone
• IR illuminator with 2.5 m range
• 1 relay control outputs (NO/NC)
• Image functions: BLC, DNR, WRD
• H.264 video compression
• 4 alarm inputs
• Surface mounting
• Up to 16 sub-door stations can be added in basic mode
• Creation of calling schedules possible
• Operation via iVMS-4200, browser, Hik-Connect
• Direct addition to the Hik-Connect Cloud possible
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection degree: IP65
• 12 VDC power supply or PoE (802.3 af)
DS-KV6113-WPE1(C) is a 1-subscriber door/gate station dedicated for 2nd generation Hikvision IP video intercom systems.
• 1-subscriber door/gate station
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (131° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 1 relay control output (NO/NC)
• Image functions: BLC, DNR, WRD
• Compression H.264
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave door/gate stations can be added in the basic mode
• Possibility to create calling schedules
• Controlled by iVMS-4200, web browser, Hik-Connect
• Possibility to add directly to the Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65
• 12 VDC or PoE (802.3 af) power supply
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (131° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 1 relay control output (NO/NC)
• Image functions: BLC, DNR, WRD
• Compression H.264
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave door/gate stations can be added in the basic mode
• Possibility to create calling schedules
• Controlled by iVMS-4200, web browser, Hik-Connect
• Possibility to add directly to the Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65
• 12 VDC or PoE (802.3 af) power supply
DS-KV8113-WME1(C)/Flush is a 1-subscriber door/gate station dedicated for 2nd generation Hikvision IP video intercom systems.
• 1-subscriber door station
• Built-in Mifare transponder reader (13.56 MHz)
• 2 MP color camera (129° (H)/75° (V))
• Built-in speaker and microphone
• IR illuminator with 3 m range,
• 2 relay control outputs (NO/NC)
• Built-in nameplate holder with 1 button and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression
• 4 alarm inputs
• Motion detection
• Flush-mounted
• Up to 16 sub-door stations can be added in basic mode
• Creation of calling schedules possible
• Operation via iVMS-4200, browser, Hik-Connect
• Direct addition to the Hik-Connect Cloud possible
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection degree: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
• Built-in Mifare transponder reader (13.56 MHz)
• 2 MP color camera (129° (H)/75° (V))
• Built-in speaker and microphone
• IR illuminator with 3 m range,
• 2 relay control outputs (NO/NC)
• Built-in nameplate holder with 1 button and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression
• 4 alarm inputs
• Motion detection
• Flush-mounted
• Up to 16 sub-door stations can be added in basic mode
• Creation of calling schedules possible
• Operation via iVMS-4200, browser, Hik-Connect
• Direct addition to the Hik-Connect Cloud possible
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection degree: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
DS-KV8113-WME1(C)/Surface is a 1-subscriber door/gate station dedicated for 2nd generation Hikvision IP video intercom systems.
• 1-subscriber door/gate station
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (124° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 1 button and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave door/gate stations can be added in the basic mode
• Possibility to create calling schedules
• Operated via iVMS-4200, web browsers, Hik-Connect
• Possibility to add directly to the Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (124° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 1 button and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave door/gate stations can be added in the basic mode
• Possibility to create calling schedules
• Operated via iVMS-4200, web browsers, Hik-Connect
• Possibility to add directly to the Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
DS-KV8213-WME1(C)/Surface is a 2-subscriber door/gate station dedicated for 2nd generation Hikvision IP video intercom systems.
• 2-subscriber door/gate station
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (129° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 2 buttons and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave stations can be added in basic mode
• Calling schedules can be created
• Control with iVMS-4200, browser Hik-Connect (monitor required for P2P)
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
• Built-in Mifare (13.56 MHz) transponder reader
• 2 MP color camera (129° (H)/75° (V))
• Built-in speaker and microphone
• Built-in IR illuminator with 3 m range
• 2 relay control outputs (NO/NC)
• Nameplate holder with 2 buttons and LED backlight
• Image functions: BLC, DNR, WRD
• H.264 video compression
• 4 alarm inputs
• Motion detection
• Surface mounted
• Up to 16 slave stations can be added in basic mode
• Calling schedules can be created
• Control with iVMS-4200, browser Hik-Connect (monitor required for P2P)
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection level: IP65, IK08
• 12 VDC or PoE (802.3 af) power supply
DS-KV8413-WME1(C)/Surface is a 4-subscriber door/gate station dedicated for 2nd generation Hikvision IP video intercom systems.
• Door station with 4 users
• Built-in transponder reader in Mifare standard (13.56 MHz)
• 2 MPix colour camera (124° (H) / 75° (V))
• Built-in speaker and microphone
• IR illuminator with a range of up to 3 m
• 2 relay outputs for control (NO/NC)
• Built-in business card viewer with 4 buttons and LED backlighting
• Image functions: BLC, DNR, WRD
• H.264 compression
• 4 alarm inputs
• Motion detection
• Surface-mounted
• Up to 16 subordinate door stations can be added in basic mode
• Ringing schedules can be created
• Operation via iVMS-4200, browser, Hik-Connect (monitor required for P2P)
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection class: IP65, IK08
• Power: DC 12 V or PoE (802.3 af)
• Built-in transponder reader in Mifare standard (13.56 MHz)
• 2 MPix colour camera (124° (H) / 75° (V))
• Built-in speaker and microphone
• IR illuminator with a range of up to 3 m
• 2 relay outputs for control (NO/NC)
• Built-in business card viewer with 4 buttons and LED backlighting
• Image functions: BLC, DNR, WRD
• H.264 compression
• 4 alarm inputs
• Motion detection
• Surface-mounted
• Up to 16 subordinate door stations can be added in basic mode
• Ringing schedules can be created
• Operation via iVMS-4200, browser, Hik-Connect (monitor required for P2P)
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz)
• Protection class: IP65, IK08
• Power: DC 12 V or PoE (802.3 af)
DS-KD8003-IME1(B) is the main module of the second generation Hikvision IP video intercom.
• Fisheye color camera: 2 MP (146° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 relay outputs for control (30 V, 2 A)
• Built-in nameplate holder with 1 button and LED backlight
• 4 alarm inputs
• Image functions: BLC, DNR, WRD
• Compatible with DS-KD-XXX series frames
• Maximum expansion up to 8 modules
• Supports up to 6,000 tags, 500 monitors, 16 slave stations, 8 extensions for doorphone stations, 2,000 users
• Remote operation via Hik-Connect app (video door monitor required)
• Output to electric door strike power supply: DC 12 V / 0.5 A
• Configuration via iVMS-4200
• Power supply DC 12V or PoE (802.3 af).
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 relay outputs for control (30 V, 2 A)
• Built-in nameplate holder with 1 button and LED backlight
• 4 alarm inputs
• Image functions: BLC, DNR, WRD
• Compatible with DS-KD-XXX series frames
• Maximum expansion up to 8 modules
• Supports up to 6,000 tags, 500 monitors, 16 slave stations, 8 extensions for doorphone stations, 2,000 users
• Remote operation via Hik-Connect app (video door monitor required)
• Output to electric door strike power supply: DC 12 V / 0.5 A
• Configuration via iVMS-4200
• Power supply DC 12V or PoE (802.3 af).
DS-KD-E is a card reader module working in the EM 125 kHz standard, designed to work with the second generation Hikvision IP video intercom system.
• Supports EM 125 kHz cards
• Configuration via iVMS-4200 (v3)
• DS-KD8003-IME1 master module required for operation
• Configuration via iVMS-4200 (v3)
• DS-KD8003-IME1 master module required for operation
DS-KD-M is a card reader module working in the Mifare 13.56 MHz standard, designed to work with the second generation Hikvision IP video intercom system.
• Supports 13.56 MHz Mifare standard cards
• Configuration via iVMS-4200 (v3)
• DS-KD8003-IME1 master module required for operation
• Configuration via iVMS-4200 (v3)
• DS-KD8003-IME1 master module required for operation
DS-KD-IN is an indicator module that uses illuminated icons to inform the user about the status of the door station: calling, talking, opening the door.
• Call, talk, door opening status indicator
• Configuration via iVMS-4200 (v3)
• DS-KD8003-IME1 main module required for operation
• Configuration via iVMS-4200 (v3)
• DS-KD8003-IME1 main module required for operation
DS-KD-KK is module with 6 buttons and places for name tags, designed to work with the second generation Hikvision IP video intercom system.
• Number of buttons and business card slots: 6
• LED backlighting
• Configuration via iVMS-4200 (v3)
• Master module DS-KD8003-IME1 required for operation
• LED backlighting
• Configuration via iVMS-4200 (v3)
• Master module DS-KD8003-IME1 required for operation
The DS-KD-K12 is a 12-button name plate holder module for Hikvision video door phone systems.
• Number of buttons: 12
• Name plate slot
• LED backlighting
• Configuration via iVMS-4200
• Name plate slot
• LED backlighting
• Configuration via iVMS-4200
DS-KD-KP is a numeric keypad module designed for second generation Hikvision IP video intercom systems.
• Subscriber dialling
• Code lock function
• Configuration via iVMS-4200 (v3)
• DS-KD8003-IME1 main module required for operation
• Code lock function
• Configuration via iVMS-4200 (v3)
• DS-KD8003-IME1 main module required for operation
DS-KD-DIS is a display module that provides information on the status of the door station. It informs the user about door opening, call and conversation.
• 3.5" TFT LCD display with a resolution of 320 x 480 px
• 4 physical backlit buttons
• Possibility to add up to 500 contacts
• Calling an indoor station from the displayed contact list
• Display of information about call duration, door opening, doorphone going into message recording mode after a missed call
• Display of indoor station number selected using DS-KD-KP keypad module
• Configuration via iVMS-4200 (v3)
• SD8003-IME1 main module required for operation
• 4 physical backlit buttons
• Possibility to add up to 500 contacts
• Calling an indoor station from the displayed contact list
• Display of information about call duration, door opening, doorphone going into message recording mode after a missed call
• Display of indoor station number selected using DS-KD-KP keypad module
• Configuration via iVMS-4200 (v3)
• SD8003-IME1 main module required for operation
DS-KD-TDM is a 4" display module, dedicated to work with Hikvision DS-KD8003-IME1 and DS-KD8003-IME2 IP door station main modules.
• Compatible with DS-KD8003-IME1 and DS-KD8003-IME2 door stations
• 4" IPS touchscreen display with 480 x 480 p resolution
• Built-in Mifare (13.56 MHz) standard tag reader
• Open with card or code
• List of tenants
• Numeric keypad
• Possibility to display advertisements
• Programming with iVMS-4200
• Protection level: IP65, IK08
• 4" IPS touchscreen display with 480 x 480 p resolution
• Built-in Mifare (13.56 MHz) standard tag reader
• Open with card or code
• List of tenants
• Numeric keypad
• Possibility to display advertisements
• Programming with iVMS-4200
• Protection level: IP65, IK08
DS-KD-BK is an empty blank module, designed to work with the second generation Hikvision IP video intercom system.
• Other devices can be mounted inside the module
• Mounting in DS-KD-ACF and DS-KD-ACW frames
• Mounting in DS-KD-ACF and DS-KD-ACW frames
The DS-KH6320-WTE1/EU is a state-of-the-art touchscreen monitor designed to support second-generation Hikvision IP video door entry systems.
• 7" TFT LCD colour touch screen with a resolution of 1024 x 600 px
• Built-in speakers and microphone
• Perception of images from the door station and IP cameras (Hikvision, Onvif)
• Access and remote opening with iVMS-4200, Hik-Connect software
• Additional functions: intercom, recording of photos and voice messages
• Picture capture while the tenant is away
• Built-in memory: 256 MB
• Supports microSD cards up to 32 GB
• 8 inputs and 2 alarm outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply: DC 12 V or PoE (802.3af)
• Built-in speakers and microphone
• Perception of images from the door station and IP cameras (Hikvision, Onvif)
• Access and remote opening with iVMS-4200, Hik-Connect software
• Additional functions: intercom, recording of photos and voice messages
• Picture capture while the tenant is away
• Built-in memory: 256 MB
• Supports microSD cards up to 32 GB
• 8 inputs and 2 alarm outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply: DC 12 V or PoE (802.3af)
DS-KH6320-WTE1-W is a modern touch monitor dedicated for the second generation Hikvision IP video intercoms systems.
• 7" color TFT LCD display with resolution of 1024 x 600 pixels
• Built-in speakers and microphone
• Monitoring video from door/gate station and other IP cameras
• Clear sound thanks to echo and noise cancellation
• Management with iVMS-4200 app
• Access and remote opening using iVMS-4200, Hik-Connect app
• Additional functions: intercom, voice messages, saving images
• Capturing photos during the tenant absence
• Built-in memory: 128 MB
• Support for microSD cards up to 32 GB
• 8 alarm inputs and 2 alarm outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• 12 VDC or PoE (802.3af) power supply
• Built-in speakers and microphone
• Monitoring video from door/gate station and other IP cameras
• Clear sound thanks to echo and noise cancellation
• Management with iVMS-4200 app
• Access and remote opening using iVMS-4200, Hik-Connect app
• Additional functions: intercom, voice messages, saving images
• Capturing photos during the tenant absence
• Built-in memory: 128 MB
• Support for microSD cards up to 32 GB
• 8 alarm inputs and 2 alarm outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• 12 VDC or PoE (802.3af) power supply
The DS-KH8350-WTE1/EU is a state-of-the-art touchscreen monitor designed to support second-generation Hikvision IP video door entry systems.
• 7" colour IPS touchscreen with a resolution of 1024 x 600 px
• Provides a thin aluminium frame and tempered glass
• Built-in speakers and microphone
• Perception of images from the door station and IP cameras (Hikvision, Onvif)
• Access and remote opening via iVMS-4200, Hik-Connect softwar
• Additional functions: intercom, recording of photos and voice messages
• Picture capture while the tenant is away
• Built-in memory: 256 MB
• Supports microSD cards up to 32 GB
• 8 inputs and 2 alarm outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• DC 12 V or PoE (802.3af) power supply
• Winner of the Red Dot Design Award 2017
• Provides a thin aluminium frame and tempered glass
• Built-in speakers and microphone
• Perception of images from the door station and IP cameras (Hikvision, Onvif)
• Access and remote opening via iVMS-4200, Hik-Connect softwar
• Additional functions: intercom, recording of photos and voice messages
• Picture capture while the tenant is away
• Built-in memory: 256 MB
• Supports microSD cards up to 32 GB
• 8 inputs and 2 alarm outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• DC 12 V or PoE (802.3af) power supply
• Winner of the Red Dot Design Award 2017
The DS-KH8380-WTE1 is an advanced monitor designed to support second-generation Hikvision IP video door entry systems.
• 7" TFT LCD colour touch screen with a resolution of 1024 x 600 px
• Operation via graphical user interface UI v2.0
• Built-in speakers and microphone
• Viewing of images from door stations and IP cameras
• Supported compression: H.265, H.264
• Clear sound thanks to echo and noise suppression
• Management via iVMS-4200
• Access and remote opening with iVMS-4200, Hik-Connect software
• Additional functions: intercom, recording of pictures and voice messages
• Recording of photos while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 4 relay outputs (max. 30 V/DC, 1 A)
• Power output: 12 V/DC, 0.5 A
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply: 12 V/DC or PoE (802.3af)
• Operation via graphical user interface UI v2.0
• Built-in speakers and microphone
• Viewing of images from door stations and IP cameras
• Supported compression: H.265, H.264
• Clear sound thanks to echo and noise suppression
• Management via iVMS-4200
• Access and remote opening with iVMS-4200, Hik-Connect software
• Additional functions: intercom, recording of pictures and voice messages
• Recording of photos while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 4 relay outputs (max. 30 V/DC, 1 A)
• Power output: 12 V/DC, 0.5 A
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply: 12 V/DC or PoE (802.3af)
The DS-KH8381-WTE1 is an advanced touchscreen monitor designed to support second-generation Hikvision IP video door entry systems.
• 7" colour IPS touch screen with a resolution of 1024 x 600 px
• Operation via graphical user interface UI v2.0
• Physical button for easier door opening
• Built-in loudspeaker and microphone
• Viewing of images from door stations and IP cameras
• Supported compression: H.265, H.264
• Clear sound thanks to echo and noise suppression
• Management via iVMS-4200
• Access and remote opening with iVMS-4200, Hik-Connect software
• Additional functions: intercom, recording of pictures and voice messages
• Recording of photos while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 4 relay outputs (max. 30 V/DC, 1 A)
• Power output: 12 V/DC, 0.5 A
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply: 12 V/DC or PoE (802.3af)
• Operation via graphical user interface UI v2.0
• Physical button for easier door opening
• Built-in loudspeaker and microphone
• Viewing of images from door stations and IP cameras
• Supported compression: H.265, H.264
• Clear sound thanks to echo and noise suppression
• Management via iVMS-4200
• Access and remote opening with iVMS-4200, Hik-Connect software
• Additional functions: intercom, recording of pictures and voice messages
• Recording of photos while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 4 relay outputs (max. 30 V/DC, 1 A)
• Power output: 12 V/DC, 0.5 A
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply: 12 V/DC or PoE (802.3af)
The DS-KH9310-WTE1(B) is a state-of-the-art touchscreen monitor with Android operating system for Hikvision's 2nd generation IP video door entry systems.
• Compatible with 2nd generation IP video intercom system
• Operating system: Android
• 7” color TFT LCD display with resolution of 1024 x 600 pixels
• Built-in speakers and microphone
• View video from door station and IP cameras
• Management with iVMS-4200
• Access and remote opening using iVMS-4200, Hik-Connect app
• Integration with other Hikvision devices via preloaded Hik-Connect application
• Possible to install 2 additional applications
• Additional functions: intercom, voice messages, saving images
• Capturing photos during the tenant absence
• Built-in memory: 4 GB Emmc
• 8 alarm inputs and 2 relay outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
• Operating system: Android
• 7” color TFT LCD display with resolution of 1024 x 600 pixels
• Built-in speakers and microphone
• View video from door station and IP cameras
• Management with iVMS-4200
• Access and remote opening using iVMS-4200, Hik-Connect app
• Integration with other Hikvision devices via preloaded Hik-Connect application
• Possible to install 2 additional applications
• Additional functions: intercom, voice messages, saving images
• Capturing photos during the tenant absence
• Built-in memory: 4 GB Emmc
• 8 alarm inputs and 2 relay outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
The DS-KH9510-WTE1(B) is a state-of-the-art touchscreen monitor with Android operating system for Hikvision's 2nd generation IP video door entry systems.
• Compatible with 2nd generation IP video intercom system
• Operating system: Android
• 10.1" color TFT LCD display with a resolution 1024 x 600 p
• Operated via graphical interface UI v2.0
• Built-in speakers and microphone
• Viewing of video from door station and IP cameras
• Clear sound due to echo and noise cancellation
• Management via iVMS-4200
• Access and remote opening via iVMS-4200, Hik-Connect software
• Integration with other Hikvision devices via pre-installed Hik-Connect application
• Possibility to install 2 additional applications
• Additional features: intercom, recording of photos and voice messages
• Capturing photos during the tenant absence
• Built-in memory: 8 GB Emmc
• MicroSD slot (for future applications, currently not supported)
• 8 alarm inputs and 2 relay outputs
• Built-in Wi-Fi module 2.4 GHz (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
• Operating system: Android
• 10.1" color TFT LCD display with a resolution 1024 x 600 p
• Operated via graphical interface UI v2.0
• Built-in speakers and microphone
• Viewing of video from door station and IP cameras
• Clear sound due to echo and noise cancellation
• Management via iVMS-4200
• Access and remote opening via iVMS-4200, Hik-Connect software
• Integration with other Hikvision devices via pre-installed Hik-Connect application
• Possibility to install 2 additional applications
• Additional features: intercom, recording of photos and voice messages
• Capturing photos during the tenant absence
• Built-in memory: 8 GB Emmc
• MicroSD slot (for future applications, currently not supported)
• 8 alarm inputs and 2 relay outputs
• Built-in Wi-Fi module 2.4 GHz (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
DS-KH6351-WTE1 is a modern touch monitor dedicated for the second generation Hikvision IP video intercoms systems.
• Color ''7 TFT LCD display with resolution of 1024 x 600 p
• Controlled with UI v2.0 GUI
• Built-in speakers and microphone
• Monitoring video from door/gate station and IP cameras
• Clear sound thanks to echo and noise cancellation
• Management via iVMS-4200, hik-Connect app
• Access and remote opening with iVMS-4200, Hik-Connect software
• Additional functions: intercom, saving images and voice messages
• Capturing photos during the tenant absence
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs and 2 alarm outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply 12 VDC or PoE (802.3af)
• Controlled with UI v2.0 GUI
• Built-in speakers and microphone
• Monitoring video from door/gate station and IP cameras
• Clear sound thanks to echo and noise cancellation
• Management via iVMS-4200, hik-Connect app
• Access and remote opening with iVMS-4200, Hik-Connect software
• Additional functions: intercom, saving images and voice messages
• Capturing photos during the tenant absence
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs and 2 alarm outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Network interface: RJ-45 10/100 Base-T
• Power supply 12 VDC or PoE (802.3af)
DS-KH6000-E1/Alarm is an indoor audio station, without screen, designed for use with second generation Hikvision IP video intercoms.
• Operation via 9 touch buttons
• Possibility to assign functions to 4 buttons
• Built-in speakers and microphone
• Clear sound due to elimination of echo and noise
• Expansion up to 16 extensions
• 4 alarm inputs
• Management via iVMS-4200
• No Hik-Connect cloud support
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
• Possibility to assign functions to 4 buttons
• Built-in speakers and microphone
• Clear sound due to elimination of echo and noise
• Expansion up to 16 extensions
• 4 alarm inputs
• Management via iVMS-4200
• No Hik-Connect cloud support
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
DS-KH6100-E1/Alarm is a non-contact monitor designed to work with second generation Hikvision IP video intercoms.
• 4.3" color non-touch TFT LCD screen with 480 × 272 p resolution
• Operation via 9 touch buttons
• Possibility to assign functions to 4 buttons
• Built-in speakers and microphone
• Clear sound due to elimination of echo and noise
• Expansion up to 16 extensions
• 4 alarm inputs
• Management via iVMS-4200
• No Hik-Connect cloud support
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
• Operation via 9 touch buttons
• Possibility to assign functions to 4 buttons
• Built-in speakers and microphone
• Clear sound due to elimination of echo and noise
• Expansion up to 16 extensions
• 4 alarm inputs
• Management via iVMS-4200
• No Hik-Connect cloud support
• Network interface: RJ-45 10/100 Base-T
• Power supply 12VDC or PoE (802.3af)
The AWT 027 G74321 power supply (transformer) has been designed for powering devices requiring 11.5 VAC or 14 VAC supply voltage and consuming less than 0.8 A or 0.6 A, respectively. The transformer is typically used in door entry systems for powering electric strikes. Self-resetting thermal protec...
• Power: 10 VA
• Output voltage: AC 16,5 V or 14 V
• Output current: 0.8 or 0.6 A
• Protection: thermal fuse, 130° (returnable)
• Designed for power supply module for door openers
• Output voltage: AC 16,5 V or 14 V
• Output current: 0.8 or 0.6 A
• Protection: thermal fuse, 130° (returnable)
• Designed for power supply module for door openers
DS-KD-ACF1 is a set for flush mounting, dedicated to the second generation Hikvision IP video intercom system.
• Mounting: flush-mounted
• Number of modules supported: 1
• Construction material: aluminium alloy and plastic
• Compatibility: IP video door station modules and 2-Wire Hikvision 2nd generation
• Number of modules supported: 1
• Construction material: aluminium alloy and plastic
• Compatibility: IP video door station modules and 2-Wire Hikvision 2nd generation
DS-KD-ACF2 is a set for flush mounting, dedicated to the second generation Hikvision IP video intercom system.
• Mounting: flush-mounted
• Number of modules supported: 2
• Material: aluminium alloy and plastic
• Compatibility: IP video door station modules and 2-Wire Hikvision 2nd generation
• Number of modules supported: 2
• Material: aluminium alloy and plastic
• Compatibility: IP video door station modules and 2-Wire Hikvision 2nd generation
DS-KD-ACF3 is a set for flush mounting, dedicated to the second generation Hikvision IP video intercom system.
• Mounting: flush-mounted
• Number of modules supported: 3
• Construction material: aluminium alloy and plastic
• Compatibility: IP video door station modules and 2-Wire Hikvision 2nd generation
• Number of modules supported: 3
• Construction material: aluminium alloy and plastic
• Compatibility: IP video door station modules and 2-Wire Hikvision 2nd generation
DS-KD-ACW1 is a surface-mounted frame designed for the installation of a second-generation Hikvision IP video door entry system.
• Mounting: surface-mounted
• Number of modules supported: 1
• Material: aluminium alloy
• Compatibility: IP video door station modules and 2-Wire Hikvision 2nd generation
• Number of modules supported: 1
• Material: aluminium alloy
• Compatibility: IP video door station modules and 2-Wire Hikvision 2nd generation
DS-KD-ACW2 is a surface-mounted frame dedicated for mounting the second generation Hikvision IP video intercom. Made of aluminum alloy, it allows safe and aesthetic assembly of 2 modules.
• Mounting: surface-mounted
• Number of modules supported: 2
• Material: aluminium alloy
• Compatibility: IP video door station modules and 2-Wire Hikvision 2nd generation
• Number of modules supported: 2
• Material: aluminium alloy
• Compatibility: IP video door station modules and 2-Wire Hikvision 2nd generation
DS-KD-ACW3 is a surface-mounted frame dedicated for mounting the second generation Hikvision IP video intercom. Made of aluminum alloy, it allows safe and aesthetic assembly of 3 modules.
• Mounting: surface-mounted
• Number of modules supported: 3
• Material: aluminium alloy
• Compatibility: IP video door station modules and 2-Wire Hikvision 2nd generation
• Number of modules supported: 3
• Material: aluminium alloy
• Compatibility: IP video door station modules and 2-Wire Hikvision 2nd generation
DS-KABV6133-G/Surface is a surface-mounted housing by Hikvision, which allows the surface mounting of the DS-KV6133-WME1 door station.
• Surface-mounted box
• Compatibility: DS-KV6133-WME1
• Design: SGCC (hot-dip galvanized steel)
• Compatibility: DS-KV6133-WME1
• Design: SGCC (hot-dip galvanized steel)
The DS-KABD8003-RS1 is a rain shield dedicated for surface mounting of the modular door/gate station of the second generation IP and 2-Wire Hikvision video intercom.
• Rain shield IP, 2-Wire Hikvision video intercom
• Dedicated for surface mounting of the 1-module housing
• Dedicated for surface mounting of the 1-module housing
The DS-KABD8003-RS2 is a rain shield dedicated for surface mounting of the modular door/gate station of the second generation IP and 2-Wire Hikvision video intercom.
• Rain shield IP, 2-Wire Hikvision video intercom
• Dedicated for surface mounting of the 2-module housing
• Dedicated for surface mounting of the 2-module housing
The DS-KABD8003-RS3 is a rain shield dedicated for surface mounting of the modular door/gate station of the second generation IP and 2-Wire Hikvision video intercom.
• Rain shield IP, 2-Wire Hikvision video intercom
• Dedicated for surface mounting of the 3-module housing
• Dedicated for surface mounting of the 3-module housing
Rain shield: Hikvision DS-KABV6113-RS/Surface for DS-KV6113-PE1 and DS-KV6113-WPE1 door/gate station
The DS-KABV8113-RS/Surface is a rain shield (housing) dedicated for surface mounting of the KV6103/6113 IP Villa 2 gen. door/gate stations.
• Rain shield for Villa 2 gen. surface-mounted door/gate stations
• Compatibility: DS-KV6113-PE1 and DS-KV6113-WPE1
• Material: plastic
• Compatibility: DS-KV6113-PE1 and DS-KV6113-WPE1
• Material: plastic
The DS-KABV6133-RS is a rain shield (housing) dedicated for surface mounting of the DS-KV6133-WME1 Villa 2nd gen surface-mounted door station.
• Rain shield for Villa door station
• Compatibility: DS-KV6133-WME1 in surface mounted version
• Design: SGCC (hot-dip galvanized steel)
• Compatibility: DS-KV6133-WME1 in surface mounted version
• Design: SGCC (hot-dip galvanized steel)
The DS-KABV8113-RS/Surface is a rain shield (housing) dedicated for surface mounting of the DS-KV8X13-WME1 IP Villa 2 gen. door/gate stations.
• Rain shield for Villa 2 gen. surface-mounted door/gate stations
• Compatibility: DS-KV8X13-WME1 surface-mounted
• Material: steel
• Compatibility: DS-KV8X13-WME1 surface-mounted
• Material: steel
DS-KABV8113-RS/Flush is a protective canopy (housing) designed for the flush mounting of the DS-KV8X13-WME1 2nd generation IP Villa door stations.
• Rain shield for Villa 2 gen. flush mounted door/gate stations
• Compatibility: DS-KV8X13-WME1 flush mounted
• Material: steel
• Compatibility: DS-KV8X13-WME1 flush mounted
• Material: steel
The DS-KV9503-WBE1 is a rain shield (housing) dedicated for surface mounting of the DS-KV9503-WBE1 Villa 2nd gen surface-mounted door station.
• Rain shield for DS-KV9503-WBE1 door station
• Surface-mounted design
• Surface-mounted design
DS-KAB86 is a flush-mounted box designed for mounting Hikvision indoor video door entry stations (monitors) from the DS-KH, DS-K series.
• Flush mount box designed for DS-KH, DS-K series monitors
• Material of construction: PVC
• Material of construction: PVC
UNIQUE 125 kHz standard universal proximity key fob characterised by its elegant design and small dimensions.
• Operating frequency: 125 kHz
• Standard: UNIQUE
• Memory: 64 bit
• Laser-printed number in 8H10D format
• Colour: grey
• Standard: UNIQUE
• Memory: 64 bit
• Laser-printed number in 8H10D format
• Colour: grey
Universal 125 kHz UNIQUE proximity card characterised by an elegant design and small dimensions.
• Operating frequency: 125 kHz
• Standard: UNIQUE
• Memory: 64 bit
• Number printed in 8H10D + WEG24A format
• Colour: white
• Standard: UNIQUE
• Memory: 64 bit
• Number printed in 8H10D + WEG24A format
• Colour: white
The S303BNR-BE is a versatile 13.56 MHz Mifare proximity key fob, which features a sleek design and compact size.
• Operating frequency: 13,56 MHz
• Standard: MIFARE
• Memory: 1 kB
• Laser-printed number in 8H10D format
• Transmission speed: 106 kbps
• Save cycles: 100000
• Color: blue
• Dimensions: 32 x 41 mm
• Standard: MIFARE
• Memory: 1 kB
• Laser-printed number in 8H10D format
• Transmission speed: 106 kbps
• Save cycles: 100000
• Color: blue
• Dimensions: 32 x 41 mm
Universal proximity key fob in the 13.56 MHz Mifare standard characterised by an elegant design and small dimensions.
• Operating frequency: 13.56 MHz
• Standard: MIFARE
• Memory: 1 kB
• Memory: 64 bit
• Laser-printed reverse number in 8H10D format
• Broadcast speed: 106 kbps
• Write cycles: 100000
• Colour: black
• Standard: MIFARE
• Memory: 1 kB
• Memory: 64 bit
• Laser-printed reverse number in 8H10D format
• Broadcast speed: 106 kbps
• Write cycles: 100000
• Colour: black
Universal proximity card in the 13.56 MHz Mifare standard characterised by an elegant design and small dimensions.
• Operating frequency: 13.56 MHz
• Standard: MIFARE
• Memory: 1 kB
• Printed number in 8H10D and 6H8D format
• Rate of transmission: 106 kbps
• Write cycles: 100000
• Colour: white
• Standard: MIFARE
• Memory: 1 kB
• Printed number in 8H10D and 6H8D format
• Rate of transmission: 106 kbps
• Write cycles: 100000
• Colour: white
YPW3D is an exit pushbutton, used in video intercom and access control systems.
• Material: fire-resistant PCV
• Pushbutton contacts: NO/NC/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: surface-mounted
• Pushbutton contacts: NO/NC/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: surface-mounted
YPW1 is an exit pushbutton, used in video intercom and access control systems.
• Materials: zinc alloy (button – steel)
• Pushbutton contacts: NO/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: surface-mounted (slim profiles)
• Pushbutton contacts: NO/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: surface-mounted (slim profiles)
YPW5DP is an exit pushbutton, used in video intercom and access control systems.
• Material: aluminum
• Pushbutton contacts: NO/NC/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: flush-mounted
• Pushbutton contacts: NO/NC/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: flush-mounted
PW5DK is an exit pushbutton, used in video intercom and access control systems.
• Material: aluminum
• Pushbutton contacts: NO/NC/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: flush-mounted
• Pushbutton contacts: NO/NC/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: flush-mounted
The active converter kit allows Ethernet data and PoE power to be transmitted over a single pair of cables. Ideal when replacing cabling is not possible or cost-effective.
• Ethernet transmission over any 2 wires of cable
• Transmission of 100 Mbps up to 300 m and 10 Mbps up to 800 m (UTP cable)
• Power supply possible from PoE switch in 802.3af, 802.3at standard or PoE Passive (PoE IN port)
• Clear indication of operation, bandwidth and transmission status
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 1.35 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Transmission of 100 Mbps up to 300 m and 10 Mbps up to 800 m (UTP cable)
• Power supply possible from PoE switch in 802.3af, 802.3at standard or PoE Passive (PoE IN port)
• Clear indication of operation, bandwidth and transmission status
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 1.35 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
The relay module is used to control and signal states, such as in alarm and access control systems.
• Relay with C/N/NO contacts for voltage up to 30 V DC or 48 VD AC with maximum current 1 A
• Serial fuse in relay circuit (C, NO, NC)
• Serial fuse in relay circuit (C, NO, NC)
The device reduces the voltage on the DC plug to 12 V and simultaneously transfers PoE power to the RJ45 output.
• PoE voltage reduction from 48 V to 12 V – available at a DC plug (illuminator, microphone, heater)
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af standard and supplies them with power.
• Nine 10/100 Mbps RJ-45 ports including 4 x PoE
• PoE power supply up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 62 W
• PoE power supply up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 62 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af standard and supplies them with power.
• 9 RJ-45 10/100 Mbps ports
• 8 ports with PoE function
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 124 W
• 8 ports with PoE function
• PoE power supply of up to 15 W for each PoE port
• Power supply compliant with IEEE802.3af standard
• Power budget: 124 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af/at standard and supplies them with power.
• 10 RJ-45 10/100 Mbps ports including 8x PoE
• PoE power supply of up to 30 W per PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 110 W
• PoE power supply of up to 30 W per PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 110 W
The PoE switch ensures smooth network transmission. It automatically detects PD devices operating under the 802.3af/at standard and supplies them with power.
• 8 RJ-45 10/100 Mbps ports including 8x PoE
• 2 RJ-45 10/100/1000 Mbps ports
• PoE power supply of up to 30 W for each PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 120 W
• 2 RJ-45 10/100/1000 Mbps ports
• PoE power supply of up to 30 W for each PoE port
• Power supply compliant with IEEE802.3af/at standard
• Power budget: 120 W
DS-KIS702Y is a 2-wire video intercom kit from Hikvision.
• DS-KD8003Y-IME2 G73646 door station main module – 1
• DS-KD-ACW1 Hikvision 1-module surface-mounted housing G74351 – 1
• DS-KH6320Y-WTE2 G74019 indoor station – 1
• Audio, video, power distributor DS-KAD704Y – 1
• Power supply DS-KAW30-2N – 1
• MicroSD card (16 GB) – 1
• DS-KD-ACW1 Hikvision 1-module surface-mounted housing G74351 – 1
• DS-KH6320Y-WTE2 G74019 indoor station – 1
• Audio, video, power distributor DS-KAD704Y – 1
• Power supply DS-KAW30-2N – 1
• MicroSD card (16 GB) – 1
The DS-KIS703Y-P is a complete 2-Wire Hikvision 2nd generation video intercom kit.
• 1-subscriber door/gate station
• Fisheye color camera: 2 MP+++ (140° (H)/85° (V))
• Built-in speaker and microphone
• Built-in infrared illuminator IR+++ up to 3 m
• 2 relay outputs for control
• 12 V/0.5 A output DC for powering the electric door strike
• Built-in nameplate with LED backlight
• 2 alarm inputs (for output button or a reed switch
• Image functions: WRD
• Configuration from the monitor
• 24V DC power supply from the monitor via 2-Wire bus
• Mounting: surface and flush
• Protection rating: IP65
• Power consumption: < 10 W
• Dimensions: 169 × 110 × 32
• Fisheye color camera: 2 MP+++ (140° (H)/85° (V))
• Built-in speaker and microphone
• Built-in infrared illuminator IR+++ up to 3 m
• 2 relay outputs for control
• 12 V/0.5 A output DC for powering the electric door strike
• Built-in nameplate with LED backlight
• 2 alarm inputs (for output button or a reed switch
• Image functions: WRD
• Configuration from the monitor
• 24V DC power supply from the monitor via 2-Wire bus
• Mounting: surface and flush
• Protection rating: IP65
• Power consumption: < 10 W
• Dimensions: 169 × 110 × 32
DS-KIS704EY-ACW2/Aluminum is a video intercom set of 2-Wire HD system by Hikvision
• Module of the main door station DS-KD7003EY-IME2/A G73647 - 1 pc.
• DS-KD-KP keypad module G73668 - 1 pc.
• Surface-mounted 2-module enclosure DS-KD-ACW2 G74354 - 1 pc.
• KH7300EY-WTE2/White indoor station G74027 - 1 pc.
• Audio, video, power distributor KAD7040EY - 1 pc.
• Power supply HDR-30-48 - 1 pc.
• DS-KD-KP keypad module G73668 - 1 pc.
• Surface-mounted 2-module enclosure DS-KD-ACW2 G74354 - 1 pc.
• KH7300EY-WTE2/White indoor station G74027 - 1 pc.
• Audio, video, power distributor KAD7040EY - 1 pc.
• Power supply HDR-30-48 - 1 pc.
DS-KIS704EY-ACF2/Aluminum is a video intercom set of 2-Wire HD system by Hikvision
• Module of the main door station DS-KD7003EY-IME2/A G73647 - 1 pc.
• DS-KD-KP keypad module G73668 - 1 pc.
• Flush-mounted-mounted 2-module enclosure DS-KD-ACF2 G74343 - 1 pc.
• KH7300EY-WTE2/White indoor station G74027 - 1 pc.
• Audio, video, power distributor KAD7040EY - 1 pc.
• Power supply HDR-30-48 - 1 pc.
• DS-KD-KP keypad module G73668 - 1 pc.
• Flush-mounted-mounted 2-module enclosure DS-KD-ACF2 G74343 - 1 pc.
• KH7300EY-WTE2/White indoor station G74027 - 1 pc.
• Audio, video, power distributor KAD7040EY - 1 pc.
• Power supply HDR-30-48 - 1 pc.
DS-KD8003Y-IME2 is Hikvision's second-generation video door station master module, dedicated to Hikvision 2-Wire operation.
• Fisheye color camera: 2 MP (146° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 relay outputs for control (30 V, 2 A)
• Built-in nameplate holder with 1 button and LED backlight
• 4 alarm inputs
• Image functions: BLC, DNR, WRD
• Compatible with DS-KD-XXX series frames
• Maximum expansion up to 8 modules
• Support for up to 500 indoor stations
• Remote operation via Hik-Connect app (video door monitor required)
• Output to electric door strike power supply: 12 VDC/0.5 A
• Configuration via iVMS-4200 (v3)
• Communication bus: 2-Wire
• Power and communication using G74824 DS-KAD706Y – 24 VDC
• Functionality of 2nd generation IP video door entry system
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 relay outputs for control (30 V, 2 A)
• Built-in nameplate holder with 1 button and LED backlight
• 4 alarm inputs
• Image functions: BLC, DNR, WRD
• Compatible with DS-KD-XXX series frames
• Maximum expansion up to 8 modules
• Support for up to 500 indoor stations
• Remote operation via Hik-Connect app (video door monitor required)
• Output to electric door strike power supply: 12 VDC/0.5 A
• Configuration via iVMS-4200 (v3)
• Communication bus: 2-Wire
• Power and communication using G74824 DS-KAD706Y – 24 VDC
• Functionality of 2nd generation IP video door entry system
DS-KD8003Y-IME2 is a Hikvision door station main module, part of the 2-Wire HD system (EY series).
• Compatible with EY series
• Possibility to install 0, 1 or 2 call buttons in main module
• Maximum expansion up to 8 modules
• Fisheye color camera: 2 MP (133° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 control outputs (1 x pulse 20 V/4 A, 1 x relay NO/NC 30 V/DC)
• 2 alarm inputs (exit button or reed switch)
• Image functions: WRD
• Support for up to 2000 users, 99 monitors, 16 slave stations
• Compatible with DS-KD-xxx series modules and DS-KD-ACFx and DS-KD-ACWx enclosures
• Power and communication via 2-Wire bus
• Capable of 12 VDC power
• Wifi interface (AP mode configuration only)
• Plug & Play connection (configuration on switches)
• Protection rating: IP65, IK08
• Possibility to install 0, 1 or 2 call buttons in main module
• Maximum expansion up to 8 modules
• Fisheye color camera: 2 MP (133° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 control outputs (1 x pulse 20 V/4 A, 1 x relay NO/NC 30 V/DC)
• 2 alarm inputs (exit button or reed switch)
• Image functions: WRD
• Support for up to 2000 users, 99 monitors, 16 slave stations
• Compatible with DS-KD-xxx series modules and DS-KD-ACFx and DS-KD-ACWx enclosures
• Power and communication via 2-Wire bus
• Capable of 12 VDC power
• Wifi interface (AP mode configuration only)
• Plug & Play connection (configuration on switches)
• Protection rating: IP65, IK08
DS-KH6320Y-WTE2 is a modern touch monitor designed to control Hikvision second-generation video intercom systems in the 2-Wire standard.
• 7" TFT LCD colour touch screen with a resolution of 1024 x 600 px
• Operation via graphical user interface UI v2.0
• Built-in speakers and microphone
• Viewing of images from the door station and IP cameras
• Clear sound thanks to echo and noise suppression
• Configuration via iVMS-4200 (v3)
• Operation, access via the cloud with iVMS-4200, Hik-Connect applications
• Additional functions: intercom, recording of photos and voice messages
• Picture capture while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 2 relay outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Power and communication using G74824 DS-KAD706Y - DC 24 V
• Functionality of IP video intercom 2nd generation
• Operation via graphical user interface UI v2.0
• Built-in speakers and microphone
• Viewing of images from the door station and IP cameras
• Clear sound thanks to echo and noise suppression
• Configuration via iVMS-4200 (v3)
• Operation, access via the cloud with iVMS-4200, Hik-Connect applications
• Additional functions: intercom, recording of photos and voice messages
• Picture capture while the tenant is away
• Built-in memory: 128 MB
• Supports microSD cards up to 128 GB
• 8 alarm inputs
• 2 relay outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Power and communication using G74824 DS-KAD706Y - DC 24 V
• Functionality of IP video intercom 2nd generation
DS-KH6320Y-WTE2 is a modern touch monitor designed to control Hikvision second-generation video intercom systems in the 2-Wire standard.
• 7” color TFT LCD display with resolution of 1024 x 600 pixels
• Indoor station controlled with UI v2.0 GUI
• Built-in speakers and microphone
• Monitoring video from door/gate station and other IP cameras
• Clear sound thanks to echo and noise cancellation
• Configuration via iVMS-4200 (v3)
• Management and control via iVMS-4200 (v3) app and cloud service
• Additional functions: intercom, voice messages, saving images
• Capturing photos during the tenant absence
• Built-in memory: 128 MB
• Support for microSD cards up to 128GB
• 8 alarm inputs
• 2 relay outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Power and communication via G74824 DS-KAD706Y – 24 VDC
• 2nd-generation IP video phone/intercom functionality
• Indoor station controlled with UI v2.0 GUI
• Built-in speakers and microphone
• Monitoring video from door/gate station and other IP cameras
• Clear sound thanks to echo and noise cancellation
• Configuration via iVMS-4200 (v3)
• Management and control via iVMS-4200 (v3) app and cloud service
• Additional functions: intercom, voice messages, saving images
• Capturing photos during the tenant absence
• Built-in memory: 128 MB
• Support for microSD cards up to 128GB
• 8 alarm inputs
• 2 relay outputs
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Power and communication via G74824 DS-KAD706Y – 24 VDC
• 2nd-generation IP video phone/intercom functionality
DS-KH7300EY-WTE2 is a state-of-the-art touchscreen monitor from Hikvision, designed to work with the 2-Wire HD video intercom system, EY series.
• Compatible with EY series
• 7" color TFT LCD touchscreen with 1024 x 600 p resolution
• Operation via GUI and 3 physical buttons
• Picture capture while occupant is away and storage on microSD card
• Built-in speakers and microphone
• Clear sound due to echo and noise cancellation
• Remote operation via Hik-Connect
• MicroSD card support up to 128 GB
• Connectivity for up to 3 expansions
• 1 alarm input
• Built-in Wi-Fi 2, 4 GHz (IEEE 802. 11 b/g/n)
• Plug & Play connectivity (configuration on DEC switches)
• Power and communication via 2-Wire bus
• 7" color TFT LCD touchscreen with 1024 x 600 p resolution
• Operation via GUI and 3 physical buttons
• Picture capture while occupant is away and storage on microSD card
• Built-in speakers and microphone
• Clear sound due to echo and noise cancellation
• Remote operation via Hik-Connect
• MicroSD card support up to 128 GB
• Connectivity for up to 3 expansions
• 1 alarm input
• Built-in Wi-Fi 2, 4 GHz (IEEE 802. 11 b/g/n)
• Plug & Play connectivity (configuration on DEC switches)
• Power and communication via 2-Wire bus
DS-KH7300EY-WTE2/White is a state-of-the-art touchscreen monitor from Hikvision, designed to work with the 2-Wire HD video intercom system, EY series.
• Compatible with EY series
• 7" color TFT LCD touchscreen with 1024 x 600 p resolution
• Operation via GUI and 3 physical buttons
• Picture capture while occupant is away and storage on microSD card
• Built-in speakers and microphone
• Clear sound due to echo and noise cancellation
• Remote operation via Hik-Connect
• MicroSD card support up to 128 GB
• Connectivity for up to 3 expansions
• 1 alarm input
• Built-in Wi-Fi 2, 4 GHz (IEEE 802. 11 b/g/n)
• Plug & Play connectivity (configuration on DEC switches)
• Power and communication via 2-Wire bus
• 7" color TFT LCD touchscreen with 1024 x 600 p resolution
• Operation via GUI and 3 physical buttons
• Picture capture while occupant is away and storage on microSD card
• Built-in speakers and microphone
• Clear sound due to echo and noise cancellation
• Remote operation via Hik-Connect
• MicroSD card support up to 128 GB
• Connectivity for up to 3 expansions
• 1 alarm input
• Built-in Wi-Fi 2, 4 GHz (IEEE 802. 11 b/g/n)
• Plug & Play connectivity (configuration on DEC switches)
• Power and communication via 2-Wire bus
The Mean Well HDR-30-24 36 W switch mode power supply is designed to power electronic devices requiring 24 V DC voltage.
• Power: 36 W
• Output voltage: DC 24 V
• Output voltage: DC 24 V
The 60 W Mean Well HDR-60-24 switched mode power supply is designed to work with electronic devices that require a 24 VDC/2.5 A power supply.
• Power: 60 W
• Output voltage: DC 24 V
• Range of output voltage adjustment: DC 21.6 - 29 V
• Output current: 2.5 A
• Protection: overcurrent, overload, short-circuit
• Distributor power supply module from 2-Wire DS-KAD706 system
• DIN rail mounting
• Output voltage: DC 24 V
• Range of output voltage adjustment: DC 21.6 - 29 V
• Output current: 2.5 A
• Protection: overcurrent, overload, short-circuit
• Distributor power supply module from 2-Wire DS-KAD706 system
• DIN rail mounting
The Delta DRC-24V60W-1AZ 60 W switched-mode power supply is designed to supply power to electronic equipment that requires 24 VDC supply.
• Power output: 60 W
• Output voltage: DC 24 V
• Output voltage adjustment range: DC 24 - 28 V
• Output current: 2,5 A
• Protection: overload, overvoltage, short circuit
• Output voltage: DC 24 V
• Output voltage adjustment range: DC 24 - 28 V
• Output current: 2,5 A
• Protection: overload, overvoltage, short circuit
The Mean Well HDR-150-48 switch mode power supply with a power of 150 W is designed to power electronic devices requiring a direct current of 48 V DC.
• Power: 150 W
• Output voltage: DC 48 V
• Output voltage: DC 48 V
DS-KAD706Y is an audio, video and power distributor dedicated to work with Hikvision 2nd generation video door entry system in 2-wire system.
• Audio, video and power distributor for Hikvision 2nd generation 2-wire video door entry system
• 6 x 2-Wire interface (CH1-CH6 power supply for monitors, including CH6 power supply for door station)
• 2 x 2-Wire interface (cascade communication using DS-KAD706Y-S)
• 1 x RJ-45 10/100 Base-T (LAN connection)
• 24 VDC power supply (no power supply included)
• 6 x 2-Wire interface (CH1-CH6 power supply for monitors, including CH6 power supply for door station)
• 2 x 2-Wire interface (cascade communication using DS-KAD706Y-S)
• 1 x RJ-45 10/100 Base-T (LAN connection)
• 24 VDC power supply (no power supply included)
The DS-KAD7060EY is an audio, video and power distributor designed for use with Hikvision's EY series 2-Wire HD video door entry system.
• Audio, video and power distributor for Hikvision 2-Wire HD system
• 6 x interface with 2-Wire power supply
• 2 x 2-Wire interface (DS-KAD7060EY or DS-KAD7060EY-S)
• Maximum power for each of the CH1 and CH2 ports: up to 15 W
• Power budget for CH3 + CH4 + Ch5 + CH6 ports: up to 110 W
• DIN rail mounting
• Power supply 48 VDC (no power supply included)
• 6 x interface with 2-Wire power supply
• 2 x 2-Wire interface (DS-KAD7060EY or DS-KAD7060EY-S)
• Maximum power for each of the CH1 and CH2 ports: up to 15 W
• Power budget for CH3 + CH4 + Ch5 + CH6 ports: up to 110 W
• DIN rail mounting
• Power supply 48 VDC (no power supply included)
The DS-KAD7061EY is a floor distributor designed to work with Hikvision's EY series 2-Wire HD video door entry system.
• Floor distributor for 2-Wire HD system
• 4 x 2-Wire interface for monitor connection
• 2 x 2-Wire interfaces for cascade connection
• 6 status indicators for 2-Wire interfaces
• No local power supply required (2-Wire bus power supply)
• 4 x 2-Wire interface for monitor connection
• 2 x 2-Wire interfaces for cascade connection
• 6 status indicators for 2-Wire interfaces
• No local power supply required (2-Wire bus power supply)
Industrial switch-mode power supply 54 W with DIN rail mounting: high efficiency, stable and continuous operation, full protection, adjustable output voltage.
• Small dimensions
• High power output
• Based on high-end electronic components
• Comprehensively protected
• Low surge current
• Trimmer
• Perforated housing
• LED indicator
• Double output terminals
• High power output
• Based on high-end electronic components
• Comprehensively protected
• Low surge current
• Trimmer
• Perforated housing
• LED indicator
• Double output terminals
60 W, 24 V industrial switching power supply with DIN rail mounting: high efficiency, stable and continuous operation, full protection, voltage regulation.
• Small dimensions
• High power output
• Based on high-end electronic components
• Comprehensively protected
• Low surge current
• Trimmer
• Perforated housing
• LED indicator
• Double output terminals
• High power output
• Based on high-end electronic components
• Comprehensively protected
• Low surge current
• Trimmer
• Perforated housing
• LED indicator
• Double output terminals
The BIRA EL1-001 electric door strike, from the EL1 series, is used for cooperation with access control systems such as intercoms, video intercoms, card readers, etc.
• Powered by 12 V AC
• Operational type NC (normally closed)
• Mechanical strength - pressure 6000 N (600 kg)
• Mechanical strength - opening cycles 200,000
• For left and right handed doors
• Steel striker
• Asymmetric design
• Voltage tolerance: 7-14 V
• Current consumption: 650 mA
• Operational type NC (normally closed)
• Mechanical strength - pressure 6000 N (600 kg)
• Mechanical strength - opening cycles 200,000
• For left and right handed doors
• Steel striker
• Asymmetric design
• Voltage tolerance: 7-14 V
• Current consumption: 650 mA
The BIRA EL1-005 electric door strike from the EL1 series, is used for cooperation with access control systems such as intercoms, video intercoms, card readers, etc.
• Powered by 12 V DC.
• Operational type NC (normally closed)
• Mechanical strength - pressure 6000 N (600 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Steel striker
• Asymmetric design
• Voltage tolerance: 8-14 V
• Current consumption: 450 mA
• Operational type NC (normally closed)
• Mechanical strength - pressure 6000 N (600 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Steel striker
• Asymmetric design
• Voltage tolerance: 8-14 V
• Current consumption: 450 mA
The BIRA ES1-001 electric door strike, from the ES1 series, is used for cooperation with access control systems such as intercoms, video intercoms, card readers, etc.
• Powered by 12 V AC/DC DC or AC voltage
• Operational type NC (normally closed)
• Mechanical strength - thrust 3500 N (350 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Steel hinge adjustable up to 4 mm
• Symmetric design
• Voltage tolerance: 9 - 14 V
• AC/DC current consumption: 370/450 mA
• Operational type NC (normally closed)
• Mechanical strength - thrust 3500 N (350 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Steel hinge adjustable up to 4 mm
• Symmetric design
• Voltage tolerance: 9 - 14 V
• AC/DC current consumption: 370/450 mA
The BIRA BIRA HARTTE S12U electric door strike from the S series, is used for cooperation with access control systems such as intercoms, video intercoms, etc.
• Powered by 12 V AC/DC DC or AC voltage
• Operational type NC (normally closed)
• Mechanical strength - thrust 3500 N (350 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Steel hinge adjustable up to 4 mm
• Symmetric design
• Voltage tolerance: 10 - 14 V
• AC/DC current consumption: 410/570 mA
• Operational type NC (normally closed)
• Mechanical strength - thrust 3500 N (350 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Steel hinge adjustable up to 4 mm
• Symmetric design
• Voltage tolerance: 10 - 14 V
• AC/DC current consumption: 410/570 mA
The Bira HARTTE S12UP electric self-sustaining door strike from S series is used with access control systems such as intercoms, video intercoms, etc.
• Energized with 12 V AC/DC
• NC (normally closed)
• Holding force: 3500 N (350 kg)
• Life span: 200,000 cycles
• For left- and right-hand doors
• Steel keeper/latch with 4 mm adjustment range
• Symmetric design
• Self-sustaining
• Energizing voltage range: 10-14 V
• Current consumption AC/DC: 410/570 mA
• NC (normally closed)
• Holding force: 3500 N (350 kg)
• Life span: 200,000 cycles
• For left- and right-hand doors
• Steel keeper/latch with 4 mm adjustment range
• Symmetric design
• Self-sustaining
• Energizing voltage range: 10-14 V
• Current consumption AC/DC: 410/570 mA
The BIRA HARTTE S12UW electric door strike from the S series, with an on-off switch, is used to work with access control systems such as intercoms, video intercoms, etc.
• Powered by 12 V AC/DC DC or AC voltage
• Operational type NC (normally closed)
• Mechanical strength - thrust 3500 N (350 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable catch up to 4 mm
• Symmetric design
• Switch
• Voltage tolerance: 10 - 14 V
• AC/DC current consumption: 410/570 mA
• Operational type NC (normally closed)
• Mechanical strength - thrust 3500 N (350 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable catch up to 4 mm
• Symmetric design
• Switch
• Voltage tolerance: 10 - 14 V
• AC/DC current consumption: 410/570 mA
The BIRA HARTTE S12R S-series reversible electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 VDC
• NO (normally open, reversible)
• Continuous power on (100% ED)
• Holding force: 3500 N (350 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 4 mm
• Symmetrical design
• Voltage tolerance: 10-14 V
• DC current drawn: 190 mA
• NO (normally open, reversible)
• Continuous power on (100% ED)
• Holding force: 3500 N (350 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 4 mm
• Symmetrical design
• Voltage tolerance: 10-14 V
• DC current drawn: 190 mA
The BIRA HARTTE XS12U XS-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 V AC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
The BIRA HARTTE XS12UW XS-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 V AC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Switch
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Switch
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
The BIRA HARTTE XS12UP XS-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 V AC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Memory
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Memory
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
The BIRA HARTTE XS12R XS-series reversible electric door strike is used for remote wired opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 VDC
• NO (normally open)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left- and right-hand doors
• Steel strike, adjustable up to 3.5 mm
• Reversible
• Symmetrical design
• Voltage tolerance: 10-14 V
• Current consumption AC/DC: 480/680 mA
• NO (normally open)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left- and right-hand doors
• Steel strike, adjustable up to 3.5 mm
• Reversible
• Symmetrical design
• Voltage tolerance: 10-14 V
• Current consumption AC/DC: 480/680 mA
The HARTTE XS12R-C XS-C series electric door strike is used for remote wired opening of doors.
• Powered by 12 V/DC
• NO operating (normally open) mode
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - 200,000 opening cycles
• For left and right doors
• ZnAl strike with up to 3.5 mm adjustment
• Reversible
• Slip
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• DC current drawn: 200 mA
• NO operating (normally open) mode
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - 200,000 opening cycles
• For left and right doors
• ZnAl strike with up to 3.5 mm adjustment
• Reversible
• Slip
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• DC current drawn: 200 mA
The BIRA HARTTE XS00U XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UP XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Internal memory
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Internal memory
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UW XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Switch
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Switch
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UPW XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Switch
• Internal memory
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Switch
• Internal memory
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00U-C XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Slip
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Slip
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UW-C XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Slip option
• Switch
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Slip option
• Switch
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UM XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Monitoring
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Monitoring
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
HARTTE's F00U-C electric door strike from the F series is a modern solution dedicated to cooperation with access control systems.
• Powered by DC or AC/DC 11 - 24 V
• Operational type NC (normally closed)
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable up to 3 mm in radial shape
• Symmetric design
• Current consumption AC: 200 - 390 mA, DC: 280 - 560 mA
• Adapted for continuous operation at 12 V/DC
• Operating temperature: -25°C to +50°C
• Operational type NC (normally closed)
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable up to 3 mm in radial shape
• Symmetric design
• Current consumption AC: 200 - 390 mA, DC: 280 - 560 mA
• Adapted for continuous operation at 12 V/DC
• Operating temperature: -25°C to +50°C
HARTTE's F12R-C reversing electric door strike from the F series is a modern solution dedicated to cooperation with access control systems.
• Powered by DC or AC 10 - 14 V
• NO operation type (normally open)
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable up to 3 mm in radial shape
• Symmetric design
• DC current consumption: 200 mA
• Capable of continuous operation (100% ED)
• Operating temperature: -25°C to +50°C
• NO operation type (normally open)
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable up to 3 mm in radial shape
• Symmetric design
• DC current consumption: 200 mA
• Capable of continuous operation (100% ED)
• Operating temperature: -25°C to +50°C
HARTTE's F24R-C reversing electric door strike from the F series is a modern solution dedicated to cooperation with access control systems.
• Powered by DC or AC 20 - 26 V
• NO operation type (normally open)
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical resistance - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable up to 3 mm in radial shape
• Symmetric design
• DC current consumption: 100 mA
• Capable of continuous operation (100% ED)
• Operating temperature: -25°C to +50°C
• NO operation type (normally open)
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical resistance - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable up to 3 mm in radial shape
• Symmetric design
• DC current consumption: 100 mA
• Capable of continuous operation (100% ED)
• Operating temperature: -25°C to +50°C
The OK-P5 is a long strike plate for use with electric door strikes from the ES1, S, XS, SHD, XSHD Bira series.
• Material: galvanized steel
• Compatible with electric strikes of the ES1, S, XS, SHD, XSHD series
• Dedicated to right and left doors (double-sided)
• Compatible with electric strikes of the ES1, S, XS, SHD, XSHD series
• Dedicated to right and left doors (double-sided)
The OK-P2 is a short strike plate for use with electric door strikes from the ES1, S, XS, SHD, XSHD Bira series.
• Material: galvanized steel
• Compatible with electric strikes of the ES1, S, XS, SHD, XSHD series
• Dedicated to right and left doors
• Dimensions: 130 x 25 x 3 mm
• Compatible with electric strikes of the ES1, S, XS, SHD, XSHD series
• Dedicated to right and left doors
• Dimensions: 130 x 25 x 3 mm
The OK-P6 is a long strike plate for use with electric door strikes from the EL1, ELP, ES1, S, XS, SHD, XSHD Bira series.
• Material: galvanized steel
• Compatible with electric strikes of the EL1, ELP, ES1, S, XS, SHD, XSHD series
• Dedicated to right and left doors (double-sided)
• Dimensions: 250 x 25 x 3 mm
• Compatible with electric strikes of the EL1, ELP, ES1, S, XS, SHD, XSHD series
• Dedicated to right and left doors (double-sided)
• Dimensions: 250 x 25 x 3 mm
NETSET U/UTP Category 5e twisted pair cable is the top quality twisted pair designed for professional indoor systems.
• Type of cable: U/UTP
• Category 5e
• Flammability class: B2ca
• Application: indoor
• PVC coating
• Wire diameter 0.49 mm (24 AWG)
• Carton 305 m
• Category 5e
• Flammability class: B2ca
• Application: indoor
• PVC coating
• Wire diameter 0.49 mm (24 AWG)
• Carton 305 m
![CAT 5e UTP Cable: NETSET U/UTP 5e [1 m], indoor](https://www.dipolnet.com/img/thumbnails/e1408_1+.jpg/a630cf52df7a992e9e56e9545070da55.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 5e
• Application: indoor
• PVC sheath
• Conductor diameter 0.5 mm (24 AWG)
• Cable sold by metre
• Category 5e
• Application: indoor
• PVC sheath
• Conductor diameter 0.5 mm (24 AWG)
• Cable sold by metre
![CAT 5e UTP Cable: NETSET BOX U/UTP 5e [305 m], indoor](https://www.dipolnet.com/img/thumbnails/e1408_305+.jpg/188e1484f397d90baef9c211d5b16e6f.jpg)
The NETSET BOX U/UTP CAT 5e cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).
• Cable type: U/UTP
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![Cat 5 UTP Cable: NETSET BOX U/UTP 5e (indoor) [500 m]](https://www.dipol.com.pl/img/thumbnails/e1408_500+.jpg/ac61ede939e81b2f87ddd78f10793c3f.jpg)
The NETSET BOX U/UTP CAT 5e cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).
• Cat 5e cable for indoor applications
• Parameters far exceeding the requirements for Category 5+ twisted pair cables
• Solid wires of 0.50 mm diameter (24 AWG)
• High quality confirmed by tests conducted by National Institute of Telecommunications in Warsaw, Poland
• Parameters far exceeding the requirements for Category 5+ twisted pair cables
• Solid wires of 0.50 mm diameter (24 AWG)
• High quality confirmed by tests conducted by National Institute of Telecommunications in Warsaw, Poland
![Twisted-pair cable: NETSET Lite U/UTP 5e [305 m], Cu, 0.45 mm](https://www.ostelsat.hu/img/thumbnails/e1409_305+++.jpg/51f1525c68566f19e91c8bac34aa0d83.jpg)
The NETSET Lite U/UTP Category 5e twisted pair cable is dedicated for building simple network systems.
• Cable type: U/UTP
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.45 mm
• Core material: copper
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.45 mm
• Core material: copper
![Cat. 5e UTP Cable: NETSET U/UTP 5e <br>(outdoor - gel-filled, black) [1 m]](https://www.ostelsat.hu/img/thumbnails/e1410_1+.jpg/a4a81cb97d9b1d5e5946fd9b4574e645.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 5e
• Application: outdoor, gel-filled
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
• Category 5e
• Application: outdoor, gel-filled
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
![CAT 5e UTP Cable: NETSET BOX U/UTP 5e <br>(outdoor - gel-filled, black) [305 m]](https://www.dipol.sk/img/thumbnails/e1410_305+.jpg/275219395bf9beba159cefa36587df33.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP, gel-filled
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![Cat. 5e UTP Cable: NETSET U/UTP PE (outdoor) [1 m]](https://www.ostelsat.hu/img/thumbnails/e1412_1+.jpg/5d0f0016367a10aea3405e28c052ce9a.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
![NETSET BOX U/UTP PE 5e black cable, outdoor twisted pair, flammability class Fca [305 m]](https://www.dipol.sk/img/thumbnails/e1412_305+.jpg/d3aa6bfff64795aad29b313689bcbf7c.jpg)
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![CAT 5e UTP Cable: NETSET BOX U/UTP 5e [305 m] (indoor, Dca-s1,d2,a1)](https://www.ostelsat.hu/img/thumbnails/e1414_305+.jpg/4d076eb9744a66af90621126e87e298f.jpg)
NETSET U/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 5e
• Application: indoor
• LSZH sheath
• Flammability class Dca-s1,d2,a1
• Conductor diameter 0.49 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: indoor
• LSZH sheath
• Flammability class Dca-s1,d2,a1
• Conductor diameter 0.49 mm (24 AWG)
• Carton 305 m
![NETSET U/FTP 5e shielded twisted-pair cable, indoor use [1 m]](https://www.dipol.sk/img/thumbnails/e1515_1+.jpg/52a026ed24d4b3e3ecf959462a2b40e4.jpg)
The NETSET F/UTP CAT 5e is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: F/UTP
• Category 5e
• Applications: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Sold by the meter
• Category 5e
• Applications: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Sold by the meter
![CAT 5e FTP Shielded Cable: NETSET BOX F/UTP 5e [305 m], indoor](https://www.dipol.sk/img/thumbnails/e1515_305+.jpg/38b1eca8e5019a9912871f4792ea3eb6.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair cable designed for professional installations inside buildings.
• Cable type: F/UTP
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![Cat. 5e Shielded Cable: NETSET BOX F/UTP 5e [1 m], outdoor](https://www.dipol.sk/img/thumbnails/e1517_305+++.jpg/1aa3e823056582cd075b41a79e0c0c9e.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
![Cat. 5e Shielded Cable: NETSET BOX F/UTP 5e [305 m], outdoor](https://www.dipol.sk/img/thumbnails/e1517_305+.jpg/37e76cbe392c50176ed00ff2a4cf3aed.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Carton 305 m
![Cat. 5e Shielded Cable: NETSET F/UTP 5e [1 m] (PE, outdoor, with messenger wire)](https://www.dipol.com.pl/img/thumbnails/e1519_500+++.jpg/05dca64684c703a8274f325fedb068fa.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP with carrier wire
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.51 mm (24 AWG)
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.51 mm (24 AWG)
![Cat. 5e shielded Cable: NETSET F/UTP 5e [500 m] (PE, outdoor, with messenger wire)](https://www.dipol.com.pl/img/thumbnails/e1519_500+.jpg/c005d32963d41cc29dd07c0696405e51.jpg)
NETSET F/UTP category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP with carrier wire
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.51 mm (24 AWG)
• Spool 500 m
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.51 mm (24 AWG)
• Spool 500 m
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• Carton 305 m
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• Carton 305 m
![Cat. 6 Cable: NETSET BOX U/UTP 6 (indoor) [1 m]](https://www.ostelsat.hu/img/thumbnails/e1608_305+++.jpg/df36ca01f208b728c876d1154dcafe64.jpg)
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Conductor diameter 0.54 mm (23 AWG)
• Cable sold by the metre
• Category 6
• Application: indoor
• PVC sheath
• Conductor diameter 0.54 mm (23 AWG)
• Cable sold by the metre
![Cat. 6 UTP Cable: NETSET BOX U/UTP 6 (indoor) [305 m]](https://www.dipol.sk/img/thumbnails/e1608_305+.jpg/d1a0d00fd9618ca3e12077288aa2d562.jpg)
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• Carton 305 m
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• Carton 305 m
![NETSET BOX U/UTP cat. 6 indoor twisted pair cable [500 m]](https://www.ostelsat.hu/img/thumbnails/e1608_500+.jpg/0191b99ee18f6499036eb5832bf992d2.jpg)
NETSET U/UTP Category 6 twisted pair cable is the top quality twisted pair designed for professional indoor systems.
• Cable type: U/UTP
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• 500 m drum
• Category 6
• Application: indoor
• PVC sheath
• Core diameter 0.54 mm (23 AWG)
• 500 m drum
![NETSET U/UTP PE category 6 black cable, outdoor twisted pair, flammability class Fca [1 m]](https://www.ostelsat.hu/img/thumbnails/e1610_305+.jpg/9596ddb9259eead966140be128aa123f.jpg)
NETSET U/UTP category 6 twisted pair cable is the highest quality twisted pair cable designed for professional outdoor installations.
• Cable type: U/UTP
• Category 6
• Application: outdoor
• LDPE sheath
• Core diameter 0.54 mm (23 AWG)
• Category 6
• Application: outdoor
• LDPE sheath
• Core diameter 0.54 mm (23 AWG)
![Cat. 6 UTP Cable: NETSET BOX U/UTP PE (outdoor) [305 m]](https://www.ostelsat.hu/img/thumbnails/e1610_305+++.jpg/462a3bd430375fca07c11dc68d1359d2.jpg)
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair cable designed for professional outdoor installations.
• Cable type: U/UTP
• Category 6
• Application: outdoor
• LDPE sheath
• Core diameter 0.54 mm (23 AWG)
• Box 305 m
• Category 6
• Application: outdoor
• LDPE sheath
• Core diameter 0.54 mm (23 AWG)
• Box 305 m
NETSET U/UTP category 6 gel-filled twisted pair is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
NETSET U/UTP category 6 gel-filled twisted pair is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
![Cat. 6 UTP Cable: NETSET F/UTP LSZH Dca s2 d2 a1 [500 m]](https://www.dipol.sk/img/thumbnails/e1612_500+.jpg/c4ffafed0bf27b8f5a4f11a67beaa7b1.jpg)
The NETSET F/UTP CAT 6 is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: F/UTP
• Category 6
• Applications: indoors
• LSZH sheath
• Reaction to fire: Dca-s2,d2,a1
• Conductor diameter 0.51 mm (24 AWG)
• 500 m spool
• Category 6
• Applications: indoors
• LSZH sheath
• Reaction to fire: Dca-s2,d2,a1
• Conductor diameter 0.51 mm (24 AWG)
• 500 m spool
NETSET F/UTP category 6 gel-filled twisted pair is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheath
• Core diameter 0.565 mm
• Sold by metres
NETSET F/UTP category 6 gel-filled twisted pair is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: F/UTP
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
• Category 6
• Applications: outdoor
• Gel-filled twisted-pair cable
• LDPE sheats
• Core diameter 0.565 mm
• 500 m spool
![Cat. 6 UTP Cable: NETSET BOX U/UTP CAT 6 [305 m] (indoor, Dca-s2,d2,a1)](https://www.ostelsat.hu/img/thumbnails/e1614_305+.jpg/4aae5c80332300ae7bcfd56aabe1c59c.jpg)
The NETSET cable comes from the latest generation of UTP twisted pair cables. Its external diameter has been reduced to 5.9 mm, which considerably facilitates insertion of the cable into ducts and pipes. Special insulation material makes it easier to attach RJ-45 connectors.
• Cable type: U/UTP
• Category 6
• Application: indoor
• LSZH sheath
• Flammability class Dca-s2,d2,a1
• Conductor diameter 0,54 mm (24 AWG)
• Carton 305 m
• Category 6
• Application: indoor
• LSZH sheath
• Flammability class Dca-s2,d2,a1
• Conductor diameter 0,54 mm (24 AWG)
• Carton 305 m
NETSET U/UTP Category 6 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: U/UTP
• Category 6
• Uses: indoors
• LSZH sheath
• Fire class B2ca-s1a-d1-a1
• Conductor diameter 0.55 mm (24 AWG)
• Category 6
• Uses: indoors
• LSZH sheath
• Fire class B2ca-s1a-d1-a1
• Conductor diameter 0.55 mm (24 AWG)
NETSET U/FTP Category 6A twisted pair cable is the highest quality twisted pair cable designed for professional indoor installations.
• Cable type: U/FTP
• Category 6A
• Application: interior
• Flammability class B2ca s1a,d1,a1
• Conductor diameter 0.57 mm (23 AWG)
• Roll of 500 m
• Category 6A
• Application: interior
• Flammability class B2ca s1a,d1,a1
• Conductor diameter 0.57 mm (23 AWG)
• Roll of 500 m
The NETSET U/UTP cat. 6A is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: U/UTP
• Category 6A
• Uses: indoors
• Fire class B2ca s1a, d1, a1
• Conductor diameter 0.565 mm
• 500-metre reel
• Category 6A
• Uses: indoors
• Fire class B2ca s1a, d1, a1
• Conductor diameter 0.565 mm
• 500-metre reel
![Cat. 7 S/FTP Shielded Cable: NETSET BOX S/FTP CAT 7 [500 m] (indoor, Cca s1a d1 a1)](https://www.dipolnet.ro/img/thumbnails/e1626_500+.jpg/a28d2045190b2c3ef5e50643e9693a48.jpg)
NETSET S/FTP category 7 twisted pair cable is the highest quality twisted pair designed for professional indoor installations.
• Cable type: S/FTP
• Category 7
• Application: indoor
• LSZH sheath
• Conductor diameter 0,56 mm
• Roll of 500 m
• Category 7
• Application: indoor
• LSZH sheath
• Conductor diameter 0,56 mm
• Roll of 500 m
![6-core Signal Cable: YTDY 6X0.5 [100 m]](https://www.dipolnet.com/img/thumbnails/j8606_100+.jpg/9a6cacaffab9c3683ca16ca742165cfa.jpg)
YTDY cable consisting of 6 wires with copper cores of 0.5 mm diameter. Designed for use in alarm and intercom systems.
• YTDY copper cable comprising 6 conductors with a diameter of 0.5 mm
• Intended for the installation of alarm and intercom systems
• Intended for the installation of alarm and intercom systems
![8-core Signal Cable: YTDY 8X0.5 [100 m]](https://www.dipolnet.com/img/thumbnails/j8608_100+.jpg/a1a549a32c39518c8b1225350b46bfec.jpg)
YTDY cable consisting of 8 wires with copper cores of 0.5 mm diameter.
• YTDY copper cable comprising 8 conductors with a diameter of 0.5 mm
• Intended for the installation of alarm and intercom systems
• Intended for the installation of alarm and intercom systems
![10-core Signal Cable: YTDY 10X0.5 [100 m]](https://www.dipolnet.com/img/thumbnails/j8610_100+.jpg/18d561ef8f27b6f6eabbb2cfcc1752a1.jpg)
YTDY cable consisting of 10 wires with copper cores of 0.5 mm diameter. Designed for use in alarm and intercom systems.
• YTDY copper cable comprising 10 conductors with a diameter of 0.5 mm
• Intended for the installation of alarm and intercom systems
• Intended for the installation of alarm and intercom systems
