Industrial switch-mode power supply 54 W with DIN rail mounting: high efficiency, stable and continuous operation, full protection, adjustable output voltage.
• Small dimensions
• High power output
• Based on high-end electronic components
• Comprehensively protected
• Low surge current
• Trimmer
• Perforated housing
• LED indicator
• Double output terminals
• High power output
• Based on high-end electronic components
• Comprehensively protected
• Low surge current
• Trimmer
• Perforated housing
• LED indicator
• Double output terminals
DS-KD8003Y-IME2 is Hikvision's second-generation video door station master module, dedicated to Hikvision 2-Wire operation.
• Fisheye color camera: 2 MP (146° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 relay outputs for control (30 V, 2 A)
• Built-in nameplate holder with 1 button and LED backlight
• 4 alarm inputs
• Image functions: BLC, DNR, WRD
• Compatible with DS-KD-XXX series frames
• Maximum expansion up to 8 modules
• Support for up to 500 indoor stations
• Remote operation via Hik-Connect app (video door monitor required)
• Output to electric door strike power supply: 12 VDC/0.5 A
• Configuration via iVMS-4200 (v3)
• Communication bus: 2-Wire
• Power and communication using G74824 DS-KAD706Y – 24 VDC
• Functionality of 2nd generation IP video door entry system
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 relay outputs for control (30 V, 2 A)
• Built-in nameplate holder with 1 button and LED backlight
• 4 alarm inputs
• Image functions: BLC, DNR, WRD
• Compatible with DS-KD-XXX series frames
• Maximum expansion up to 8 modules
• Support for up to 500 indoor stations
• Remote operation via Hik-Connect app (video door monitor required)
• Output to electric door strike power supply: 12 VDC/0.5 A
• Configuration via iVMS-4200 (v3)
• Communication bus: 2-Wire
• Power and communication using G74824 DS-KAD706Y – 24 VDC
• Functionality of 2nd generation IP video door entry system
DS-KD8003Y-IME2 is a Hikvision door station main module, part of the 2-Wire HD system (EY series).
• Compatible with EY series
• Possibility to install 0, 1 or 2 call buttons in main module
• Maximum expansion up to 8 modules
• Fisheye color camera: 2 MP (133° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 control outputs (1 x pulse 20 V/4 A, 1 x relay NO/NC 30 V/DC)
• 2 alarm inputs (exit button or reed switch)
• Image functions: WRD
• Support for up to 2000 users, 99 monitors, 16 slave stations
• Compatible with DS-KD-xxx series modules and DS-KD-ACFx and DS-KD-ACWx enclosures
• Power and communication via 2-Wire bus
• Capable of 12 VDC power
• Wifi interface (AP mode configuration only)
• Plug & Play connection (configuration on switches)
• Protection rating: IP65, IK08
• Possibility to install 0, 1 or 2 call buttons in main module
• Maximum expansion up to 8 modules
• Fisheye color camera: 2 MP (133° (H)/82° (V))
• Built-in speaker and microphone
• Built-in IR illuminator
• 2 control outputs (1 x pulse 20 V/4 A, 1 x relay NO/NC 30 V/DC)
• 2 alarm inputs (exit button or reed switch)
• Image functions: WRD
• Support for up to 2000 users, 99 monitors, 16 slave stations
• Compatible with DS-KD-xxx series modules and DS-KD-ACFx and DS-KD-ACWx enclosures
• Power and communication via 2-Wire bus
• Capable of 12 VDC power
• Wifi interface (AP mode configuration only)
• Plug & Play connection (configuration on switches)
• Protection rating: IP65, IK08
The DS-KV7023EY-IME2 is a 1-subscriber Villa door station for the 2-Wire HD system (EY series).
• Door station 1-compatible with EY series
• Fisheye colour camera: 2 MPix (135° (H) / 85° (V))
• 2 control outputs (1 x pulse 20 V/DC, 4 A, 1 x relay NO/NC 30 V/DC, 2 A)
• Included keypad for PIN code control
• Protection class: IP65, IK08
• Fisheye colour camera: 2 MPix (135° (H) / 85° (V))
• 2 control outputs (1 x pulse 20 V/DC, 4 A, 1 x relay NO/NC 30 V/DC, 2 A)
• Included keypad for PIN code control
• Protection class: IP65, IK08
DS-KV7413EY-IME2 is a 1-subscriber Villa door station designed for the 2-Wire HD system (EY series).
• Door station 1-compatible with EY series.
• Fisheye colour camera: 2 MPix (135° (H) / 85° (V))
• 2 control outputs (1 x pulse 20 V/DC, 4 A, 1 x relay NO/NC 30 V/DC, 2 A)
• Interchangeable call buttons
• Protection class: IP65, IK08
• Fisheye colour camera: 2 MPix (135° (H) / 85° (V))
• 2 control outputs (1 x pulse 20 V/DC, 4 A, 1 x relay NO/NC 30 V/DC, 2 A)
• Interchangeable call buttons
• Protection class: IP65, IK08
A single-subscriber gateway unit for the Dahua IP and 2-Wire video intercom system.
• Vandal-proof aluminium housing with 1 mechanical button
• Can be surface-mounted or flush-mounted using dedicated mounting boxes
• 1 relay output with expansion capability
• Can operate autonomously without a monitor
• 2 Mpx camera, 1.9 mm lens, H.264 compression, IR illuminator
• SD card support
• Video recording function for missed calls
• IP65 (silicone coating required), IK07 vandal resistance rating, PoE power supply
• Can be surface-mounted or flush-mounted using dedicated mounting boxes
• 1 relay output with expansion capability
• Can operate autonomously without a monitor
• 2 Mpx camera, 1.9 mm lens, H.264 compression, IR illuminator
• SD card support
• Video recording function for missed calls
• IP65 (silicone coating required), IK07 vandal resistance rating, PoE power supply
Main module for the Dahua modular IP/2-Wire video intercom system.
• Vandal-proof aluminium housing
• Suitable for surface-mounted or flush-mounted installation using dedicated mounting boxes
• 1 relay output with expansion capability
• 1 power output: 12 V DC / 600 mA
• 2 Mpx camera, 1.9 mm lens, H.264 compression, IR illuminator
• Video recording function for missed calls
• IP65 (silicone sealing required), IK07 vandal-resistant rating, PoE power supply
• Suitable for surface-mounted or flush-mounted installation using dedicated mounting boxes
• 1 relay output with expansion capability
• 1 power output: 12 V DC / 600 mA
• 2 Mpx camera, 1.9 mm lens, H.264 compression, IR illuminator
• Video recording function for missed calls
• IP65 (silicone sealing required), IK07 vandal-resistant rating, PoE power supply
Main module for the Dahua modular IP/2-Wire video intercom system, featuring 1 button.
• Vandal-proof aluminium housing
• 1 mechanical button
• Can be surface-mounted or flush-mounted using dedicated mounting boxes
• 1 relay output with expansion capability
• 1 power output: 12 V DC / 600 mA
• 2 Mpx camera, 1.9 mm lens, H.264 compression, IR illuminator
• Video recording function upon missed calls
• IP65 (silicone sealing required), IK07 vandal resistance rating, PoE power supply
• 1 mechanical button
• Can be surface-mounted or flush-mounted using dedicated mounting boxes
• 1 relay output with expansion capability
• 1 power output: 12 V DC / 600 mA
• 2 Mpx camera, 1.9 mm lens, H.264 compression, IR illuminator
• Video recording function upon missed calls
• IP65 (silicone sealing required), IK07 vandal resistance rating, PoE power supply
A multi-subscriber gateway station for Dahua video intercom systems (both IP and 2-Wire).
• Supports up to 500 monitors
• Vandal-proof aluminium housing
• Mechanical keypad (code-operated) and Mifare-standard (13.56 MHz) proximity card reader – access via cards or key fobs
• 2.3" OLED display
• 2-megapixel camera with very wide coverage angles and an infrared illuminator, enabling round-the-clock surveillance
• Communication via the SIP protocol
• Wiegand protocol support – can be connected to readers or controllers
• 1 relay output (NO/NC) for control, allowing the gate to be opened
• Power output: 12 V 600 mA
• Vandal-proof aluminium housing
• Mechanical keypad (code-operated) and Mifare-standard (13.56 MHz) proximity card reader – access via cards or key fobs
• 2.3" OLED display
• 2-megapixel camera with very wide coverage angles and an infrared illuminator, enabling round-the-clock surveillance
• Communication via the SIP protocol
• Wiegand protocol support – can be connected to readers or controllers
• 1 relay output (NO/NC) for control, allowing the gate to be opened
• Power output: 12 V 600 mA
DS-KD-E is a card reader module working in the EM 125 kHz standard, designed to work with the second generation Hikvision IP video intercom system.
• Supports EM 125 kHz cards
• Configuration via iVMS-4200 (v3)
• DS-KD8003-IME1 master module required for operation
• Configuration via iVMS-4200 (v3)
• DS-KD8003-IME1 master module required for operation



