EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The KTW02 kit enables you to set up an IP-based video intercom system.
• VTO2311R-WP gate station main unit
• VTH2621G-WP indoor unit
• 12V/2A DC power supply – 2 units
• VTH2621G-WP indoor unit
• 12V/2A DC power supply – 2 units
Main module for the Dahua modular IP/2-Wire video intercom system, featuring 1 button.
• Vandal-proof aluminium housing
• 1 mechanical button
• Can be surface-mounted or flush-mounted using dedicated mounting boxes
• 1 relay output with expansion capability
• 1 power output: 12 V DC / 600 mA
• 2 Mpx camera, 1.9 mm lens, H.264 compression, IR illuminator
• Video recording function upon missed calls
• IP65 (silicone sealing required), IK07 vandal resistance rating, PoE power supply
• 1 mechanical button
• Can be surface-mounted or flush-mounted using dedicated mounting boxes
• 1 relay output with expansion capability
• 1 power output: 12 V DC / 600 mA
• 2 Mpx camera, 1.9 mm lens, H.264 compression, IR illuminator
• Video recording function upon missed calls
• IP65 (silicone sealing required), IK07 vandal resistance rating, PoE power supply
The DS-KABV24-A is an angle bracket that allows a Hikvision Villa door station to be mounted at a 30° angle.
• Surface mounting
• Tilt angle: 30°
• Material of construction: PC
• Tilt angle: 30°
• Material of construction: PC
DS-KABV6114-RS is a protective canopy (housing) for surface mounting of the IP Villa door station KV6114/6124 series.
• Protective housing for door station Villa
• Compatibility: KV6114/6124 series in surface-mounted version
• Construction: PC
• Compatibility: KV6114/6124 series in surface-mounted version
• Construction: PC
The relay module is used for controlling and signalling states, e.g. in alarm and access control systems.
• 2 relays with C/N/NO contacts up to DC 30 V or AC 48 V with a maximum current of 1 A
• Serialised fuse in relay circuit (C, NO, NC)
• Serialised fuse in relay circuit (C, NO, NC)
The DS-KV6114-WBE1 is a 1-subscriber door station for the Hikvision IP video door entry system, which has a plastic housing.
• Door station 1-gang in plastic
• 4 MPix colour camera (150° (H) / 75° (V))
• 2 relay outputs for control (NO/NC)
• Authentication via Bluetooth, Mifare tag, HikConnect, indoor station.
• Supports microSD cards up to 128 GB (FAT32, exFAT)
• Possibility to add directly to the Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz), Bluetooth
• 4 MPix colour camera (150° (H) / 75° (V))
• 2 relay outputs for control (NO/NC)
• Authentication via Bluetooth, Mifare tag, HikConnect, indoor station.
• Supports microSD cards up to 128 GB (FAT32, exFAT)
• Possibility to add directly to the Hik-Connect cloud
• Ethernet interface: 1 x RJ-45 10/100 Base-T, Wi-Fi (2.4 GHz), Bluetooth
This smart Android-powered monitor, combining a video doorphone, CCTV and an alarm system, features touchscreen controls, IP/2-Wire connectivity, Wi-Fi and a sleek, modern design.
• 7-inch high-visibility IPS touchscreen
• Android 14 operating system
• Support for IP video door entry systems, Wi-Fi and 2-Wire
• Built-in additional modules: ZigBee, Bluetooth, Wireless 868 MHz
• Mechanical, programmable buttons
• Easy connection to hearing aids
• Lift control
• Ability to save video messages and photos to a microSD card
• Integration with alarm and access control systems
• Built-in temperature, humidity and light sensors
• Android 14 operating system
• Support for IP video door entry systems, Wi-Fi and 2-Wire
• Built-in additional modules: ZigBee, Bluetooth, Wireless 868 MHz
• Mechanical, programmable buttons
• Easy connection to hearing aids
• Lift control
• Ability to save video messages and photos to a microSD card
• Integration with alarm and access control systems
• Built-in temperature, humidity and light sensors
This smart Android-powered monitor, combining a video doorphone, CCTV and an alarm system, features touchscreen controls, IP/2-Wire connectivity, Wi-Fi and a sleek, modern design.
• 7-inch high-resolution IPS touchscreen
• Android 14 operating system
• Support for IP, Wi-Fi and 2-Wire video door entry systems
• Two-way audio communication with echo and noise cancellation
• Ability to save video messages and photos to a microSD card
• Integration with alarm and access control systems
• Built-in temperature, humidity and light sensors
• PoE or 48 V DC power supply
• Flush-mounted installation and modern design
• Android 14 operating system
• Support for IP, Wi-Fi and 2-Wire video door entry systems
• Two-way audio communication with echo and noise cancellation
• Ability to save video messages and photos to a microSD card
• Integration with alarm and access control systems
• Built-in temperature, humidity and light sensors
• PoE or 48 V DC power supply
• Flush-mounted installation and modern design
7" monitor with Wi-Fi and touch-sensitive buttons for Dahua IP video door entry systems.
• 7" TFT LCD touchscreen
• Built-in speakers and microphone
• Touch-sensitive buttons
• Saves photos, recordings and audio-video messages to an SD card (not included; supports memory cards up to 32 GB)
• Live view from the door station and IP cameras
• Additional functions: intercom, doorbell, Do Not Disturb (DND), lift control
• Alarm inputs/outputs: 6/1
• Built-in tenant directory and call log
• Viewing of text messages issued by the management centre
• SIP 2.0, RTSP protocols
• Network interface: RJ-45 10/100 Base-T
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Power supply: DC 12 V or PoE 48 V (802.3af)
• Built-in speakers and microphone
• Touch-sensitive buttons
• Saves photos, recordings and audio-video messages to an SD card (not included; supports memory cards up to 32 GB)
• Live view from the door station and IP cameras
• Additional functions: intercom, doorbell, Do Not Disturb (DND), lift control
• Alarm inputs/outputs: 6/1
• Built-in tenant directory and call log
• Viewing of text messages issued by the management centre
• SIP 2.0, RTSP protocols
• Network interface: RJ-45 10/100 Base-T
• Built-in 2.4 GHz Wi-Fi module (IEEE 802.11 b/g/n)
• Power supply: DC 12 V or PoE 48 V (802.3af)
The KTP01-S2(F) kit enables the creation of an IP-based video intercom system.
• VTO2202F-P-S2 main gate station module
• VTH2421FW-P monitor (7" white)
• PFS3006-4ET-36 switch (4 x PoE + 2 x FE)
• VTM114 flush-mounted housing
• VTH2421FW-P monitor (7" white)
• PFS3006-4ET-36 switch (4 x PoE + 2 x FE)
• VTM114 flush-mounted housing
